GLWB-10521: could not resolve the ASM label

Similar Questions

• ORA-12154 tns could not resolve the specified correct identifier

  I am facing the following problem:

  labVIEW 2012 32 bits 64 bits of Windows 7, 10.2.0.1.0 oracle client (32-bit).

  I created a DSN from Data Sources (ODBC) (32-bit version of what in % windir%\syswow64\odbcad32.exe) pointing to an instance of Oracle 10 g.

  I have test the DSN in this way (IE. Data sources (ODBC) and the connection is successful (which means that the tnsnames.ora is correct).

  I use the "DB tools Open Connection.vi" in order to get connected to this database, passing as parameters the DSN above, the user name and password.

  I get the error:

  ADO error: 0x80040E4D
  Exception occurred in the Microsoft OLE DB provider for ODBC drivers:

  [Oracle] [ODBC] [Ora] ORA-12154: TNS could not resolve the specified correct identifier

  all will help much appreciated

  Thanks in advance

  Hello everyone.

  I already solved the problem (work until late Saturday).

  the solution was to install the latest version of the Oracle customer, namely: Oracle 11 g Release 2 CLIENT for Windows 32 (11.2.0.1.0).

  Now everything works OK.

  I also tested in Windows 7 32 bit (the .vi even and the same Oracle client). This will also OK.

  Thans a lot.

• Outlook Express 6: could not resolve the name of the beneficiary - abandoned user command

  original title: could not resolve the name of the beneficiary - abandoned user command

  When trying to send outside of Outlook Express 6 (right click, send to or by clicking on a hyperlink email), the above message appears.

  I lived http://support.microsoft.com/kb/2398839 with nothing next set-by-step does not.
  Any idea?

  AVG is known to cause problems with OE.  One thing that must be done is to ensure that is NOT set to scan the mail.  I know that the only way in the past to avoid this problem is to uninstall AVG and then reinstall it with the email Scanner option is disabled.  I don't understand what else could be blocking, unless it is another program running in the background.  I have recently spent 6 hours trying to resolve a problem where a program installed on a computer just wouldn't work, and I tested it on another computer and it worked fine.  I turned off and installed in safemode, and he still wouldn't run on this computer.  I told my friend that computer, it is that the only thing left that I could think of to try to uninstall the anti-virus software (which will move without a name) and see if it would make a difference (I had already turned off all its services) and of course the program executed instantly as soon as the machine was gone.  So I put MSE (www.microsoft.com/security_essentials/) about it, and gave it to my friend.  The moral of this story is that the running software can interact with windows to break and sometimes the only way to identify the culprit is to get rid of all works we can imagine.

  That said, I can't really fault necessarily on dysfunction something else installed on your computer, but if you went through all the hoops and it still doesn't, which suggests a background process running blocking things.  It is in any case my point of view on this.

  Another thing.  Under this key:

  HKEY_CLASSES_ROOT\mailto

  the hull | Open | order value must indicate:

  /Mailurl:%1 "%ProgramFiles%\Outlook Express\msimn.exe".

  but it is probably already.

  Steve

• error 105: could not resolve the address of the DNS server

  error 105: could not resolve the address of the DNS - why what it means and how to fix it?

  I get this message usually one or two times a day, usually in the afternoon, when I try to go to the internet.  I can use IE or Google Chrome - always get the message.
  Eighty-five percent of the time, I get very well connected.  But when I get this message, I unplug the cable modem from the power strip, wait 10 seconds, plug it in and after a few minutes, I'm connected to the internet.  How to solve this regular error?

  Hello

  You have to contact your internet provider (ISP) as DNS are usually associated with ISP. Have they reset their modem or router not only feeding cycle?

  Did you try the following steps below

  Start > all programs > Accessories > command prompt. Do a right click on it and "Run as Administrator". Type follows and press ENTER: ipconfig/flushdns

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope this helps!

• Q10 Q10 blackBerry WIFI - browser error - could not resolve the host name

  Hello

  I use my Q10 while overseas for the Wifi only. My SIM card is in my 9900 (thank you BB not to tell anyone that BIS no longer works and WW BB roaming is not until after people buy OS 10 devices, anyway...) but I want to use the Q10 for Skype, browsing and Email while on WIFI.

  Skype works.

  Browser gives "Could not resolve the host name" and charge no emails.

  WiFi network is good (the 9900 is connected and works, as do other devices). I reset the phone, router, etc. etc.

  All to nothing does not.

  A telephone conversation of two hours with T-Mobile (from abroad) was unnecessary and disconnected.

  All DNS data seems to be there.

  Please help.

  Thank you

  Aviv

  Hello

  Problem solved.

  I have reset the router before, nothing helps. The only way I got it work is as follows:

  (1) turn off the router and wait for the phone to 'do not see' to the network in question.

  (2) turn off Wifi on the phone (menu setting and tap on wifi)

  (3) restart router

  (4) restart the phone

  After about 10 minutes, it is finally connected.

  Thank you all,

  I would BB would have simply kept the features of the 9900 and just made more attractive to the masses, instead of making an iphone with a keyboard...

• sqlplus ORA-12154: TNS: could not resolve the connect identifier specified

  Hello

  I am not able to connect to the database using sqlplus, using following command:

  sqlplus activites@OCA010

  I get the error message "ORA-12154: TNS: could not resolve the connect identifier specified.

  I tried to connect by providing the full as connection string: "" sqlplus activities / [email protected]:1521 / compix "and he succeeded."

  I also tried to connect using sql developer by providing network TNS alias 'OCA010' it is also successful.

  Someone could please help out here and let me know how can I connect using sqlplus using aliases TNS network.

  content of the tnsnames.ora file is as follows

  tnsnames.ora # Network Configuration file: D:\Oracle\product\11.2.0\dbhome_1\network\admin\tnsnames.ora

  # Generated by Oracle configuration tools.

  COMPIX =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = LUCKY-HP)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = compix)

  )

  )

  BC =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = LUCKY-HP)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = BC)

  )

  )

  ORACLR_CONNECTION_DATA =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  )

  (CONNECT_DATA =

  (SID = CLRExtProc)

  (PRESENTATION = RO)

  )

  )

  OCA01 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = LUCKY-HP)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = OCA01)

  )

  )

  OCA010 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.10.3)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = compix)

  )

  )

  Thanks in advance.

  2931143 wrote:

  Hi EdStevens,

  I used option TNS with Alias network as 'OCA010' in Sql Developer.

  I checked in tnsping and tnsnames.ora directory is correct.

  Please find below the exit of tnsping:

  C:\Users\LUCKY>tnsping OCA010

  AMT Ping Utility for 64-bit Windows: Version 11.2.0.1.0 - Production on October 29, 2015 21:07:38

  Copyright (c) 1997, 2010, Oracle.  All rights reserved.

  Use settings files:

  D:\Oracle\product\11.2.0\dbhome_1\NETWORK\ADMIN\sqlnet.ora

  AMT-03505: failed to resolve the name

  Have you worked from the link I provided?  (I don't think you have time to do).

  It is possible that your tnsnames.ora is corrupted by some weird characters printable somewhere.  In some versions of the oracle, he might be sensitive to spaces vs. tabs.  If in doubt, netca to add entries, rather than doing it by hand.

• ORA-12154: TNS: could not resolve the connect identifier specified

  Hello

  I installed Oracle 11 g server in Windows 2008 and also installed customer DB 64 & 32 on the same server client.

  When I try to test the Oracle DB connection using the UDL file, I get the error message below. Please could you help me solve this problem.

  -Microsoft Data Link Error.

  Test connection failed because of an error initializing provider.

  [DBNETLIB] [ConnectionOpen(connect()) (Connect()).]

  SQL Server is not, or access is denied.

  --------------------------- OK  ---------------------------

  I have connected to SQL using sysdba and tried to connect to the schema. It is not connection and throwing below error.

  "ORA-12154: TNS: could not resolve the connect identifier specified.

  I checked the TNSNAMES.ora file. Everything seems fine.

  Thank you

  Michel K

  Hello

  I see just a glance on the tnsnames file you are missing at least one sign =...

  You have

  ORCL

  (DESC...

  You should have

  ORCL =

  (DESC...

  There may be other issues too, but give that a try at first - you better run netmgr to allow oracle to create the file for you.

  See you soon,.

  Rich

• DB Link error: ORA-12154: TNS: could not resolve the connect identifier specified

  Hi all

  We need to make an entry in the tnsname.ora file in a local database to connect to the remote database using db link?

  Here is my code: -.

  create the database link * _DBLINK

  connect to the USER IDENTIFIED BY 'user '.

  using '(DESCRIPTION =)

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = *. *. *. *)(PORT = 1521))

  )

  (CONNECT_DATA = (SERVICE_NAME = REM)

  )';

  After the creation of the DB connection when I'm trying to run select 1 of dual@***_DBLINK

  He throws me an error ORA-12154: TNS: could not resolve the connect identifier specified

  Am I expected to do an entry in the file tnsname.ora for "REM". I don't remember making any changes in the file tnsname.ora for the creation and access of the remote database via dblink.

  Help, please.

  Thanks in advance.

  2925917 wrote:

  Hi all

  We need to make an entry in the tnsname.ora file in a local database to connect to the remote database using db link?

  Here is my code: -.

  create the database link * _DBLINK

  connect to the USER IDENTIFIED BY 'user '.

  using '(DESCRIPTION =)

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = *. *. *. *)(PORT = 1521))

  )

  (CONNECT_DATA = (SERVICE_NAME = REM)

  )';

  After the creation of the DB connection when I'm trying to run select 1 of dual@***_DBLINK

  He throws me an error ORA-12154: TNS: could not resolve the connect identifier specified

  Am I expected to do an entry in the file tnsname.ora for "REM". I don't remember making any changes in the file tnsname.ora for the creation and access of the remote database via dblink.

  Help, please.

  Thanks in advance.

  I've learned to trust in your obfuscation you covered something important, or you are showing some apples and oranges.  Error to declare you come from not being able to find referenced in tnsnames.ora entry, but the way you say you created your link db, you hardcoded the entire connection, so he never users tnsnames.ora.

  I would change the definition of db_link

  create the database link * _DBLINK

  connect to the USER IDENTIFIED BY 'user '.

  using "REM."

  Then create an entry in your tnsnames.ora

  REM =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = *. *. *. *)(PORT = 1521))

  )

  (CONNECT_DATA = (SERVICE_NAME = REM)

  )

  )

  Also, use server name instead of the HOST = IP address

  The closer looks that you can miss brackets final closing on your original definition.

• "ORA-12154: TNS: could not resolve the connect identifier specified" error executing the execution in CAD Plan.

  Hi friends,

  We do face-down question when executing the execution Plan in DAC for full charge. We are working on the project of modernization of the OBI Applications and my client has worked on this environment is a few days. Before this, they load to the source 'EBSTST' instance and now changed data for instance 'EBSWKLY '. We have changed the details of connection under the tab 'Physical Data Sources' DAC. Test the connection Source and target are good. We have added input TNS of EBSWKLY in the path: u01/app/oracle/oracle11g/product/11.2.0/client_1/network/admin.

  ORA-12154: TNS: could not resolve the connect identifier specified

  Database driver error...

  Function name: connect

  [The database error: could not connect to the database using the [apps] user and the connection string [EBSWKLY].].

  Please suggest me if I m done mistake anywhere...

  Thanks in advance.

  Raghu Jen7782

  I was saying about the environment variables defined by you on the server of informatica/dac under the .profile or .bash_profile as below:

  TNS_ADMIN = $ORACLE_HOME/network/admin; Export TNS_ADMIN

  ORACLE_BASE = / home/oracle/app/oracle; export ORACLE_BASE

  ORACLE_HOME=$ORACLE_BASE/product/11.2.0/; Export ORACLE_HOME

  ORACLE_SID = InstanceName; export ORACLE_SID

  Path = $PATH: / usr/sbin: $ORACLE_HOME/bin. export PATH

  LD_LIBRARY_PATH=.:$ORACLE_HOME/lib:/lib:/usr/lib; export LD_LIBRARY_PATH

  CLASSPATH = $ORACLE_HOME/jlib: $ORACLE_HOME/rdbms/jlib. Export CLASSPATH

  Here are some examples I mentioned everything. You can set them in the user profile from which you installed the server informatica/dac.

  If it is a CAR Forum, try to set the value of the instance-specific SID for example: orcl11 or orcl12 or orcl13... try to connect to each instance. Sometimes the general SID does not recognize configuration

• Error ORA-16724: could not resolve the deficit for one or more databases in waiting

  I came to work today with the following error is displayed:

  February 5, 2014 01:27:19 error ORA-16778: make the mistake of transport for one or more databases.

  
  

  Looks like this error disappeared but now I have the following error:

  February 5, 2014 11:52:40 error ORA-16724: could not resolve the deficit for one or more databases in waiting

  I did some research on the forums and I think I need backup and restore, but I'm not sure.

  Here are some questions that I saw others asking in the forums:

  PRIMARY:

  Select max(sequence#) from v$ archived_log; -24589

  Select current_scn in the database of v$. -871568619

  SECONDARY:

  Select max(sequence#) from v$ archived_log; -24589

  Select max(sequence#) from v$ archived_log in case of application = 'YES '; -24562

  Select current_scn in the database of v$. -870987797

  Select * from v$ archive_gap;

  Thread # Low_Sequence # High_Sequence #.

  1 24563 24563

  Looks like everything is working, but the error is still appearing in OEM primer.

  The issue ended up being with the control file. I followed of many blog posts on how to roll forward the database before and they all said to restore the control file before you recover the database. I followed this paper: http://docs.oracle.com/cd/B28359_01/server.111/b28294/rman.htm#CIHIAADC and it worked as expected. The old control file has had 6 data files that were in a different place than the others. The new control file, I created the primary had all the files of data in one place. After correcting the control to point to the locations correct datafile all started working again.

• Unable to solve the ORA-12154: TNS: could not resolve the connect identifier specified

  Hi friends,

  I'm unable to resolve ORA-12154: TNS: could not resolve the connect identifier specified, error:

  C:\Windows\System32 > sqlplus scott/tiger@ORADATA

  SQL * more: Production release 11.2.0.1.0 on Sun Feb 2 13:46:10 2014

  Copyright (c) 1982, 2010, Oracle.  All rights reserved.

  ERROR:

  ORA-12154: TNS: could not resolve the connect identifier specified

  SQL > select database_name from v$ database;

  DATABASE_NAME

  ----------------------------------------------------

  ORADATA

  SQL > select instance_name from v$ instance;

  INSTANCE_NAME

  ----------------

  oradata

  tnsnames.ora

  ============

  ORADATA =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP)(HOST=himanshu-PC) (PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = oradata)

  (SERVER = DEDICATED)

  )

  )

  Listener.ora

  =========

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = himanshu-PC)(PORT = 1521))

  )

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  )

  )

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (GLOBAL_DBNAME = ORADATA)

  (ORACLE_HOME = G:\app\himanshu\product\11.2.0\dbhome_1)

  (SID_NAME = oradata)

  )

  )

  SQLNET.ora

  ========

  SQLNET. AUTHENTICATION_SERVICES = (NTS)

  C:\Windows\System32 > lsnrctl status

  LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on February 2, 2014 13:53:37

  Copyright (c) 1991, 2010, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = himanshu-PC)(PORT=1521)))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production

  Start date February 2, 2014 13:29:35

  Uptime 0 days 0 h 24 min 6 sec

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Listener parameter File G:\app\himanshu\product\11.2.0\dbhome_1\network\admin\listener.ora

  G:\app\himanshu\diag\tnslsnr\himanshu-PC\listener\alert\log.XML log listener

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = himanshu-PC)(PORT=1521)))

  (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))

  Summary of services...

  Service 'ORADATA' has 2 occurrences.

  Instance "ORADATA', status UNKNOWN, has 1 operation for this service...

  Instance "oradata' READY State, has 1 operation for this service...

  Service 'ORADATAXDB' has 1 instance (s).

  Instance "oradata' READY State, has 1 operation for this service...

  The command completed successfully

  Kindly guide whats wrong with my setup.

  You can remove your tnsnames.ora if he isn't there the other TNS inside. and use netmanager

  http://docs.Oracle.com/CD/E11882_01/network.112/e41945/AdminTools.htm#NETAG216

  Concerning

• Help! Could not resolve the address of the server: the requested name is valid, but no data of the requested type was found.

  Hello

  So I started with a Horizon view, so I apologize if this is a noob question. I wanted to try to put a security server in our DMZ, but before I put it in the DMZ I wanted to test whether customers would be on our network. So here's my setup:

  Overview of VMware View Administrator 5.3.2 generation-188719

  Same version for security server.

  Windows Firewall is activated 'On' on all profiles on security and the server connection. (this might be important later)

  Laptop with Horizon installed Client, Version 3.2.0 build-2331566

  IPad Air2 with Horizon Client Version 3.2.0 build-2331566

  On the Administrator display > display Configuration > Security servers > change on the Security Server

  I PCoIP Secure Gateway set to the IP address of the Security Server (say its 192.168.1.10:4172)

  Connection servers > edit on the login server

  I also have the Security server defined as PCoIP Secure Gateway (192.168.1.10:4172)

  Yet once I wanted to test it before I put it in the DMZ

  So when I connect with the iPad, it works fine, I can connect, see all my connections and connect to just fine.

  On the laptop, when I try to connect, I get the login screen where I put my user name and password (correctly, I might add ) and when I try and I get a connection error.

  "Error: could not resolve the address of the server: the requested name is valid, but no data of the requested type was found."

  I found the article KB VMware goes around the question: KB 2085365 (without help)

  I changed the Secure Gateway on both safety and the connection to the server at each IP I can think of, but it still does not work.

  Can someone give me an idea what can be wrong?

  What is my firewall to connect to the server? (I don't remember if I had turned on firewalls when I installed the login server while they could not properly configured summer when I install?)

  Any help would be amazing!

  Thanks for reading!

  I found the problem, it turns out that the network port to the Security server has been set for public and not private in the firewall. Thanks for the help!

• Workstation 8: Upload failed: Curl error: could not resolve the host name

  I have workstation 8 connected to our ESX host, it shows all the machines and allows me to connect to their end. But when I try to copy/paste/drag and drop a local virtual machine over there he said "Vmware workstation 8: Upload failed: Curl error: could not resolve the host name.

  Someone at - he fell on this or have any ideas why this would be. I think that if it does not find the host name, I could not navigate or connect to my Virtual Center.

  Hello

  Whats is your ESX host name? I would recommend using with full ESX host name during the connection. You can connect to the ESX host using the host name, but to download the VM in this topic, you will need to use FULL of ESX host of domain name when connecting.

  Please try to do it and let us know if it solves your problem.

  Thank you

  Deep

• ORA-16783: could not resolve the deficit for the database

  I have two databases emadb and emadbdg, governed by Data Guard. emadb is currently principal. emadbdg is currently pending physical.
  
  ORA16783 - cannot solve the gap for the database is one I think, is the origin of the problem. Anyone can help solve the problem below. Logs attached.
  
  Output of data protection
  
  DGMGRL > show detailed configuration
  
  Configuration - DRSolution
  
  Protection mode: MaxAvailability
  Databases:
  emadb - primary database
  Error: ORA-16825: multiple errors or warnings, including failover quick start or warnings, errors detected for the database
  
  emadbdg - (*) Physical standby database
  WARNING: ORA-16817: configuration not synchronized rapid failover
  
  (*) Fast failover target
  
  Properties:
  FastStartFailoverThreshold = "30"
  OperationTimeout = "30"
  FastStartFailoverLagLimit = "30"
  CommunicationTimeout = "180"
  FastStartFailoverAutoReinstate = 'TRUE '.
  FastStartFailoverPmyShutdown = "FALSE".
  BystandersFollowRoleChange = "ALL".
  
  Fast-Start Failover: ENABLED
  
  Threshold: 30 seconds
  Target: emadbdg
  Observer: emarn1
  Offset limit: 30 seconds (do not use)
  Primary closure: FALSE
  Auto-Rétablir: TRUE
  
  The configuration status:
  ERROR
  
  
  DGMGRL > see the detailed database emadb
  
  Database - emadb
  
  Role: PRIMARY
  State of destination: TRANSPORT-WE
  Occurrence (s):
  emadb
  
  Database error (s):
  ORA-16783: could not resolve the deficit for the database emadbdg
  
  Warning (s) of database:
  ORA-16817: unsynchronized fast-start failover configuration
  
  Properties:
  DGConnectIdentifier = "emadb.
  ObserverConnectIdentifier = "
  LogXptMode = "SYNCHRONIZE".
  DelayMins = '0'
  Binding = "optional."
  MaxFailure = '0'
  MaxConnections = '1'
  ReopenSecs = "300"
  NetTimeout = "30"
  RedoCompression = "DISABLE."
  LogShipping = 'ON '.
  PreferredApplyInstance = "
  ApplyInstanceTimeout = '0'
  ApplyParallel = 'AUTO '.
  StandbyFileManagement = 'AUTO '.
  ArchiveLagTarget = '0'
  LogArchiveMaxProcesses = "4"
  LogArchiveMinSucceedDest = '1'
  DbFileNameConvert = 'emadbdg, emadb '.
  LogFileNameConvert = "/ opt/app/oracle/oradata/emadbdg, / opt/app/oracle/oradata/emadb '"
  FastStartFailoverTarget = "emadbdg".
  InconsistentProperties = "(monitor).
  InconsistentLogXptProps = "(monitor).
  SendQEntries = "(monitor).
  LogXptStatus = "(monitor).
  RecvQEntries = "(monitor).
  Nom_sid = "emadb.
  StaticConnectIdentifier = ' (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=emarn1) (PORT = 1521)) (CONNECT_DATA = (SERVICE_NAME = emadb_DGMGRL) (INSTANCE_NAME = emadb)(SERVER=DEDICATED)))'
  StandbyArchiveLocation = "/ opt/app/oracle/oradata/emadb/archivelog1.
  AlternateLocation = "
  LogArchiveTrace = '0'
  LogArchiveFormat = '% t_%s_%r.dbf '.
  TopWaitEvents = "(monitor).
  
  State of the database:
  ERROR
  
  DGMGRL > see the detailed database emadbdg
  
  Database - emadbdg
  
  Role: STANDBY PHYSICS
  State of destination: apply
  Transport delay: (unknown)
  Apply the Lag: (unknown)
  Real-time query: OFF
  Occurrence (s):
  emadbdg
  
  Warning (s) of database:
  ORA-16817: unsynchronized fast-start failover configuration
  
  Properties:
  DGConnectIdentifier = "emadbdg".
  ObserverConnectIdentifier = "
  LogXptMode = "SYNCHRONIZE".
  DelayMins = '0'
  Binding = "OPTIONAL."
  MaxFailure = '0'
  MaxConnections = '1'
  ReopenSecs = "300"
  NetTimeout = "30"
  RedoCompression = "DISABLE."
  LogShipping = 'ON '.
  PreferredApplyInstance = "
  ApplyInstanceTimeout = '0'
  ApplyParallel = 'AUTO '.
  StandbyFileManagement = 'AUTO '.
  ArchiveLagTarget = '0'
  LogArchiveMaxProcesses = "4"
  LogArchiveMinSucceedDest = '1'
  DbFileNameConvert = 'emadb, emadbdg '.
  LogFileNameConvert = "/ opt/app/oracle/oradata/emadb, / opt/app/oracle/oradata/emadbdg '"
  FastStartFailoverTarget = "emadb.
  InconsistentProperties = "(monitor).
  InconsistentLogXptProps = "(monitor).
  SendQEntries = "(monitor).
  LogXptStatus = "(monitor).
  RecvQEntries = "(monitor).
  Nom_sid = "emadbdg".
  StaticConnectIdentifier = ' (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=emarn2) (PORT = 1521)) (CONNECT_DATA = (SERVICE_NAME = emadbdg_DGMGRL) (INSTANCE_NAME = emadbdg)(SERVER=DEDICATED)))'
  StandbyArchiveLocation = "/ opt/app/oracle/oradata/emadbdg/archivelog1.
  AlternateLocation = "
  LogArchiveTrace = '0'
  LogArchiveFormat = '% t_%s_%r.dbf '.
  TopWaitEvents = "(monitor).
  
  State of the database:
  WARNING
  
  DGMGRL >
  DGMGRL >
  DGMGRL >
  DGMGRL >
  DGMGRL > output

  Alex Antony Samantha wrote:

  
  Head node

  SQL> archive log list
  Database log mode            Archive Mode
  Automatic archival            Enabled
  Archive destination            /opt/app/oracle/oradata/emadb/archivelog1
  Oldest online log sequence     65
  Next log sequence to archive   67
  Current log sequence            67
  
  SQL> select thread#,max(sequence#) from v$archived_log group by thread#;
  
  THREAD# MAX(SEQUENCE#)
  ---------- --------------
        1           925
  

  It is misleading to the column sequence, sequence of real number is 65 series, but it's beyond. Have you restored any old backup with the incarnation?
  When you perform incremental backups, is the current_scn in the two primaries and Eve was balanced?

  And the sequence number * 29 * is transferred from the primary to the standby (or) he has been removed from the primary?
  Perform the two methods.

  (1) SQL > alter system set log_archive_dest_state_2 = 'reporter ';
  (2) conduct 3-4 log switches
  (3) SQL > alter system set log_archive_dest_state_2 = 'enable '.

  and displays the alert log database and backup files.
  And you mentioned the hostname in the entries of the listener, if this entry is added in/etc/hosts? otherwise you can use the IP address instead of the host name and then reload the listener.

  second method
  (1) copy archives missing from primary sequence of 29
  (2) place manually and then perform a recovery
  or
  (3) retrieve manually

  And update with your conclusions after all these lists.
  Thank you.

• ORA-12154: TNS: could not resolve the connect identifier specified in 11g R2

  Hello
  
  Recently we changed the name of our Linux server, after chanding hostname, I made changes in tnsnames.ora and listener.ora and also local_listener at the database level.
  
  When I am trying to connect database of his failure with the error.
  
  [orawiz@wizapp admin] $ sqlplus system/oracle@WIZ
  
  SQL * more: Production of release 11.2.0.1.0 LUN 20 16:57:58 Feb 2012
  
  Copyright (c) 1982, 2009, Oracle. All rights reserved.
  
  ERROR:
  ORA-12154: TNS: could not resolve the connect identifier specified
  
  
  Here's my entires of tns.
  
  [orawiz@wizapp admin] $ cat tnsnames.ora
  tnsnames.ora # Network Configuration file: /wiz_app/wiz/oracle/product/11.2.0/db_1/network/admin/tnsnames.ora
  # Generated by Oracle configuration tools.
  
  LISTENER =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.172.20.236)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = wiz)
  )
  )
  
  #wiz = (DESCRIPTION =
  # (ADDRESS_LIST =
  # (ADDRESS = (PROTOCOL = TCP) (HOST = 10.172.20.236)(PORT = 1521))
  # (CONNECT_DATA =
  # (SERVER = DEDICATED)
  # (SERVICE_NAME = wiz)
  # )
  # )
  
  [orawiz@wizapp admin] $ cat listener.ora
  listener.ora # Network Configuration file: /wiz_app/wiz/oracle/product/11.2.0/db_1/network/admin/listener.ora
  # Generated by Oracle configuration tools.
  
  WIZ =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.172.20.236)(PORT = 1521))
  )
  )
  
  #SID_LIST_LISTENER =
  # (SID_LIST =
  # (SID_DESC =
  # (SID_NAME = wiz)
  # (GLOBAL_DBNAME = wiz)
  # (ORACLE_HOME = wiz_app/wiz/oracle/product/11.2.0/db_1)
  # )
  # )
  
  
  ADR_BASE_LISTENER = / wiz_app/wiz/oracle
  
  [orawiz@wizapp admin] $ cat sqlnet.ora
  sqlnet.ora # Network Configuration file: /wiz_app/wiz/oracle/product/11.2.0/db_1/network/admin/sqlnet.ora
  # Generated by Oracle configuration tools.
  
  NAMES. DIRECTORY_PATH = (TNSNAMES, EZCONNECT)
  
  ADR_BASE = / wiz_app/wiz/oracle
  
  
  tnsping also default.
  
  [orawiz@wizapp admin] tnsping wiz $
  
  AMT Ping utility for Linux: Version 11.2.0.1.0 - Production on 20 February 2012 17:03:16
  
  Copyright (c) 1997, 2009, Oracle. All rights reserved.
  
  Use settings files:
  /wiz_app/Wiz/Oracle/product/11.2.0/Db_1/network/admin/SQLNET.ora
  
  AMT-03505: failed to resolve the name
  [orawiz@wizapp admin] $

  Nothing to with listener.ora file with ORA-12154.
  If the listener does not not or the status is not ready then it's listener.ora.

  Below add entries in your file tnsnames.ora and post $tnsping wiz

  WIZ =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = 10.172.20.236)(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = wiz.)
      )
    )
  

  Publish your file sqlnet.ora

  Published by: CKPT on 20 February 2012 17:28