Gmail settings for ePrint App (iPhone 4)

Similar Questions

• rigistery settings for this app were not copied correctly microsoft Highway and travel

  At the opening of streets MS & travel 2011 I get this error "your registry settings for this application were not copied correctly.  Run put in place againfor this application from the location where you installed worginally. "I did that 3 timees I deleted the program and reinstalled in 2 and still Lems the same error when I try to open the program.

  ... Your registry settings for this application were not copied correctly.  Race againfor implemented this application from the location where you installed worginally...

  You probably need to run the installer as administrator with elevated permissions to correctly make the necessary registry changes.

  Uninstall the program via the applet of Add / Remove Programs of the Control Panel then locate the installer from the disc or download and right click and select run as administrator. Acknowledge the UAC confirmation and provide credentials if required, proceed through the installation normally.

  Microsoft Streets & Trips should operate normally after completing the installation.

• 6500 wireless all-in - One Print: Info for eprint app the name of the host

  I am trying to print from my iPhone 6 and a time warner email account.
  The eprint application requests a host name and port.
  How can I find this info.
  Thank you very much

  Hello

  You can find SMTP for Time Warner in the link below:

  http://www.timewarnercable.com/en/support/FAQs/FAQs-Internet/e-mailacco/incoming-outgoing-server-addresses.html

  Be sure to put the right SMTP server, the 587 port with the information of the user and the password as described.

  I don't see any reference to verify the SSL / TLS option, so I guess it doesn't have to be verified... If you are unable to connect, try to check this option as well.

  Kind regards

  Shlomi

• I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

  I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

  Turn off your device and turn it on again. If this does not help, sign out of your account and reconnect.

  In addition, you can try to reset your settings.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

• How to change the size of the image using HP ePrint app on and ipad or iphone

  I have a printer HP Photo Smart 7520. I have loaded down the HP ePrint app on my iPhone and iPad.  When you print a photo, how to change the six (4 X 6 or 5 X 7, for example) before printing on the iPad or the iPhone?

  Hi @thwhite1,

  Welcome to the Forums of HP's Support. I see that you want to know how to change the paper size in the HP ePrint app.

  I've included a screenshot of the HP ePrint app and where you will find the option to change the size of the paper.

  

  Please let me know how it goes.

• Cannot add my e-mail account to the HP Eprint App on my Iphone 4 s

  I have Cox e-mail.  I received by e-mail on my Iphone, no problem.  I installed the HP E-Print application, everything works fine except that I can't add my email account. Always comes to the top (impossible to verify).  I have my mail installed on two different computers, using the same settings. I called Cox, tried to configure IMAP or POP, always the same results, impossible to verify.  Is there a problem with the application?

  I've implemented the following:

  E-mail: [edited by Moderator]

  Description: My Email

  Password: (password I've always used)

  HostName: pop.east.cox.net (also tried pop.cox.net, IMAP.cox.net)

  Port: 110 (also tried 993, 995)

  SSL: Off (also tried on)

  I also entered the same exact settings I use the Iphone to receive mail.

  Any help will be appreciated, thanks

  I just read your message after having a similar issue and try to understand why the settings provided were not works on POP or IMAP mail servers.

  Here are the settings that worked for me:

  Email: User name only (do not use the entire email address)

  Description: Your choice

  Password: password by e-mail

  HostName: pop.central.cox.net (you can try West or depends on your location in the central square)

  Port: 110

  SSL off the coast

  I hope this helps.

  I was able to send a document with my iPhone 3 g (old but still works for me) to work from home.

  See you soon!

• EPrint app for Nokia lumia 920/windows 8?

  I just bought my new printer HP Photosmart - 7520... and somehow got my new mobile phone to print on the computer, which is really cool.  But I wanted to know if there is a specific application of hp for Eprint that works with my new windows 8/nokia lumia 920?  I think that the app would make it easier that how I have to do this on my phone.  You will need to send it to yourself (ie. photo you took on the phone), then go from there.

  THX.

  Hello

  There is no native apps at this point ePrint is so the way forward. Please see this:

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-setup-e-g-Windows-8/eprint-app-for-new-Nokia-Lumia-920/m-p/2468189#M86231

  Kind regards.

• Tips on improving the graphics for the app for iPhone and iPad

  I'm creating an application for iPad and iPhone 4 and it looks terrible on the iPhone 4.

  I created the Flash file in Flash IDE with Movie CS5.5 size 1024 x 768 and I use the AIR according to the parameters of IOS:

  Rendering: CPU

  Device: iPhone and iPad

  Resolution: high

  All of my graphics are vector, so I assumed that it would be the crisp air on both devices. It is not as perfect as you are looking for on the iPad as it appears on my PC screen, but I can live with that. However, I can't live with the appearance of the iPhone 4.

  So I'm looking for advice on how to improve the appearance of the iPhone 4.

  As far as I know, there isn't a way to use the 2 sets of graphs, one for each device. Please correct me if this is wrong and she would offer me a solution.

  Do all the graphics in PNG would be a solution?

  BTW I use AIR 3.2 SDK if that has to do any and my graphics are static.

  Thanks in advance.

  Nice vectors will look depends on the setting of stage.quality. Try it on medium or high instead of low. In addition, CPU or direct is likely to give more beautiful than GPU vectors only.

• What is POP, POP3 and IMAP, when I set up my email account in the HP ePrint App?

  I did as much research as I can do regarding the implementation of the HP ePrint App e-mail accounts.  If you do not see your e-mail information listed here, feel free to post below or contact your internet service company provider, by phone or e-mail, or to anyone else who might know this. I am sure there are many others that could be added, but this is a pretty comprehensive list.  I hope you find what you need to complete the setup of your e-mail applications.

  I noticed information differs from site to site, but as I've learned over time, masking the area and companies buying other companies, I just studied all the information that I could find and also if one of the names of hosts or ports does not work, then you can continue see below on this page to see if this information is the same. At that point, if you do not find what you need here, I would say that you have done all you can do before contacting appropriate for your information by email support team.

  Most of the links is active and those listed below should send you directly the pages I pulled this information since then, but only a few of them came from the real support of the sites themselves (Apple support was vague, as well as Microsoft, Macintosh and commonly used Internet services providers). Save you time by searching here first.  I hope that you will find what you need in this one-stop-shop and if you get an email that is not listed here, please report it below and I'll add it to this original document.

  Finally, as this information comes to the forum and other non-official sites, I want to add that it is a document of copy/paste/edit-for-easy-read I created in my spare time. It is a very long document, so I do is recommended to use the search and find keys to find the email that you need, but the upper part of this definition has as to what the servers, ports and are host names and the basic setup in case you need to know what are these options and their meanings.

  Here are the most common settings needed to implement most of the Clients POP3/IMAP e-mail or devices:

  The following information below can be found at http://www.swestcom.com/Support/q4.htm

  "What is POP3?

  Post Office Protocol version 3 (POP3) is a standard messaging protocol used to receive e-mail from a remote server to a local e-mail client. POP3 allows you to download e-mail messages to your local computer and read them even when you're offline. »

  "What does IMAP mean?

  The Message IMAP (Internet Access) protocol is a messaging protocol that is used to access e-mail on a remote web server from a local client. IMAP and POP3 are the two most common of messaging Internet protocols to retrieve emails. The two protocols are supported by all e-mail clients modern and web servers.

  "Main difference between IMAP and POP3:

  The POP3 protocol assumes that there is only one client connected to the mailbox. On the other hand, the IMAP protocol allows simultaneous access by multiple clients. IMAP is suitable for you if your mailbox is about to be managed by several users. »

  "What is SMTP?

  SMTP simple Mail Transfer Protocol () is the standard protocol for sending emails across the Internet. SMTP uses TCP port 25 or 2525 and sometimes you may have problems to send your messages in case your ISP has closed port 25 (How to check if port 25 is open?). To determine the SMTP server for a given domain name, the MX (Mail eXchange) should have more information."

  "When you set up:

  • POP - choose that POP-UP and the port entering the default server to 110
  • IMAP - choose IMAP and the port entering the server by default to 143
  • All other parameters are the same.
  • Username = [email protected]
  • Password = the password you set up when you set up your mailbox
  • = Incoming mail server mail.yourdomain.com
  • = Mail server outgoingsmtp.yourdomain.com
    • Outgoing requires the authentication of the server (typically found in the settings or advanced options)
    • Do NOT select "Log on using Secure Password Authentication".
    • Use the same username and password as incoming or select "use same settings as incoming.
    • Outgoing server port= 2525 or 587
      • It is subject to change according to individual preferences of your ISP.

  Note - Replace with your domain name for "yourdomain.com" and replace the first part of your e-mail address for "user".

  Email ports
  For networks, a port means endpoint to a logical connection. The port number identifies what type of port it is. Here's the e-mail ports by default for:

  • POP3 - port 110
  • IMAP - port 143
  • SMTP - port 25
  • HTTP - port 80
  • (SSMTP) - port 465 secure SMTP Protocol
  • Secure IMAP (SSL IMAP4) - port 585
  • IMAP4 over SSL (IMAPS) - port 993
  • Secure POP3 (POP) SSL - port 995.

  It is just to recap, a series of ports for people who need this information when you configure the HP ePrint app so that they could see their email from the app, I've collected over time.  I am sure that other applications also need this information.  Although long, I couldn't find a more complete place to retrieve this information.  Feel free to post additional information, faulty information or other associates subject below that it is simply a collection of data and it would be virtually impossible to test all of them. Thank you!

• ePrint app and printing by e-mail

  Just installed a Laserjet M451dn, registered with hpeprint.com, and if I print via e-mail to the printer, it works fine.

  Have also just installed and activated the ePrint App on my iPhone 6, but I am currentl 20 miles hence my printer is. The app does not seem to search for wifi connected printers, but the FAQ says I can print from "any where in the world". If I open a web page in the application (for example), click on the "optimized" button - how do I do so that print from the App? He said "no printer found. I understand that I can send mail from the phone, but it's outside the ePrint App and I expect to be able to print the optimized page, I can see the app.

  Have I misunderstood what is the App?

  Thanks for any help/info

  ADE.

  Hello

  I found this information on this link below

  http://support.HP.com/us-en/document/c01923321

  How can I add a printer on my mobile device?

  Follow these steps to select the HP printer in the list of available printers. This method will not work unless you have already been added to the list of senders to one or more HP ePrinters list.

• Office Jet Pro 8710: HP ePrint app

  I have HP Print Service Plugin installed on my 6.0.1 Android phone app. All of a sudden it will only print paper size 'hand-Index Card 3 x 5 '. I uninstalled the app and reinstalled nothing doesn't. The problem that happens on the phone Android for my daughter as well.  As it happens on all our devices I checked on my PC and the printer settings and both are defined in letter format. I had this app on my phone and previous long phones without any problems. What is the problem?

  Hello!

  Were you able to see these options on the HP ePrint app?

  

  If not, just select the first file you want to print then you will see an icon gear on the upper right. This should be the printing preferences option. If you are able to find that you can change the size of the letter (8.5x11) paper.

  Let me know if this helped.

• OfficeJet pro 8740: HP ePrint App

  I installed the app, but in the E-mail section as far as section yahoo goes it will not, I put my credentials for username and password but it won't connect in what it says to check my username and password, I tried 5 times and no luck, and then I choose the section of Google and I put in my credentials and would not connect in. I got a pop up saying (Google requires security extra step.) Please check your e-mail online security settings. )

  My 2 step of verification on google blocking the app?

  Quite as step 2 audit on yahoo and google blocked HP ePrint app. But I fixed that by removing the stage 2 audit. Now able to use e-mail apps

• Adding e-mail account to ePrint app

  I can print on my printer HP from my iPhone using a google account.  However, I can't add my ISP provided on the ePrint application account without getting an error checking.  I recorded the HP Connect address and received a confirmation e-mail.  My password, the host name (incoming server which is mail.q.com), and Port (110) seem to be correct.  Do not use is not SSL.  What Miss me.

  Thanks in advance.

  Hi BendOR:

  I'm sorry to hear you had problems, try adding your email q.com the HP Eprint App.

  The e-mail settings, you need to enter the application can be found on the link below.

  https://Qwest.CenturyLink.com/InternetHelp/email-server-settings.html

• HP eprint app does not detect photos on iPad

  Hello

  I have the HP eprint app on my ipad. I went to print a photo that I took on the ipad today, however, when I went for this app asked if he could access the camera or something like that. I wanted to press ok, however, I clicked do not allow. So when I went to print the image using the application and pressing the button photo in it no pictures not found. I deleted the app and reinstalled two times, but still no pictures are presented when I use the app to print a photo. Can you please help. I can print from the web always.

  Go to settings on the iPad, then go to Privacy, once in this menu, go to Photos. There you should find a list of applications that can have access to your photos. Make sure HP ePrint power toggle is set , then go back into the app and check the availability of the photo. If this is not the case it toggle the button off then back on and power cycle the unit and try again. I hope this helps.

• Page generated in DW CS4 - how to style for phones mobile/iphone

  Hello

  I develop the following site

  http://www.epproductions.co.UK/katebellingham

  I would like to know if I need to create a new style sheet for the site works well on an iphone?

  and how can I get the iphone to choose this style sheet? Should what settings I put in the CSS?

  Thanks in advance

  Mark

  This can become a bit complicated due to the different types of mobile devices.  For best results, build a separate mobile site - a version much simplified from your desktop site.  Then provide links to your main site for devices that can support.  Test on different devices web site.

  Build mobile Sites

  http://www.mobify.me/

  Generation iPhone, iTouch, iPad web sites & apps

  http://iWebKit.NET/

  http://Mashable.com/2009/11/26/mobile-Web-design/

  http://www.Noupe.com/how-tos/mobile-Web-design-tips-and-best-practices.html

  Or choose a liquid layout for desktop / laptop & iPhones

  http://matthewjamestaylor.com/blog/perfect-multi-column-liquid-layouts

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB
  http://ALT-Web.blogspot.com