OfficeJet pro 8740: HP ePrint App

Similar Questions

• HP OfficeJet Pro 8740: HP OfficeJet Pro 8740: settings to copy: an error has occurred. (pgCopyConfig-409)

  Hello!

  I'm changing the default bin used for print on a HP OfficeJet Pro 8740.

  The Server Web integrated to settings-> settings of copy / print-> copy settings-> selection of the status bar

  I change 'Default tray' in ' Tray 1 "to"tray 2"."

  After hitting "Apply", the following error message appears:

  An error has occurred. (pgCopyConfig-409)

  Click 'OK' to go back.

  What's not here?

  See you soon,.

  Wolfram

  Hi @wschlich

  Thanks for your comments.

  When you define the settings of copy of tray 2, it will be for this post only (unless your default tray is for copy 2 tray)

  Here's how you can win your copy of employment "continuously" starting from tray 2, follow these steps:

  

  Select the 'Setup '.

  

  

  

  

  

  

  

  

  Try to copy again, he should "stick" to tray 2

  Hope that helps!

• OfficeJet Pro 8740: Impossible to activate the web services

  I can't activate my new printer (Officejet 8740) web services.  I looked through several web pages without success.  It doesn't seem to be an option on the Billboard related to web services.  ePrint, Apps, etc., are all disabled. There are no visible icons.  What to do next?

  Hey @Ricktm56,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the activation of Web Services on your Officejet 8740 e-all-in-one printer. I can help you with that.

  To start, we need to change the setting of the printer from Commercial to consumer settings. To do this, I'll send you some directions in a private message. If you check your Inbox forum you should see a message private to me shortly.

  After resetting, please let me know if you still have problems with the activation of web services after doing the above. If you are able to install web services, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• OfficeJet Pro 8500 wireless & ePrint

  HP Officejet Pro 8500 CB023A Ser No - MY92P210H7 wireless

  I saw the ad for ePrint and it tells any printer that is connected to the internet which mine is because I directly can email scans of the only printer, but I searched the screen of the printer for something to do with Web services for my unique email address printers but couldn't find anything. can you please help?

  Concerning

  John

  Hello Phillip9,

  There is no real technical reason that there is not an update to make the ePrint printer capable.  The main reason for this is that the printer was conducted in 2009.  It has been updated twice, once with the a 8500 a910 and now with the a911 8600, which both support ePrint and any other web service except eFax.  The long and short he is, that even if it is only 16 months old, the 8500 a909 is obsolete.  I'm sorry to be the bearer of bad news.

• Office Jet Pro 8710: HP ePrint app

  I have HP Print Service Plugin installed on my 6.0.1 Android phone app. All of a sudden it will only print paper size 'hand-Index Card 3 x 5 '. I uninstalled the app and reinstalled nothing doesn't. The problem that happens on the phone Android for my daughter as well.  As it happens on all our devices I checked on my PC and the printer settings and both are defined in letter format. I had this app on my phone and previous long phones without any problems. What is the problem?

  Hello!

  Were you able to see these options on the HP ePrint app?

  

  If not, just select the first file you want to print then you will see an icon gear on the upper right. This should be the printing preferences option. If you are able to find that you can change the size of the letter (8.5x11) paper.

  Let me know if this helped.

• OfficeJet Pro 8620: Use eprint to print in b & W

  Hello

  I configured my printer Eprint Center so my colleague can print on my printer remotely. However what it prints out in color at my end. He said there is no option to its end to choose whether they come through color or B & W.

  I need to print in color myself sometimes, but whatever he sends only must be B & W. is there a way to set all printing with HP Eprint for B & W only? (apart from him having to convert each file B & W before sending)

  Thanks in advance,

  Josiah

  Hello

  The ePrint service do Word support b & w printing, but you are able to reach such a using ePrint.

  a mobile device to install the HP ePrint app and add the address of your ePrint printer.

  You can print documents (PDF, office, web sites or email as b & w

  for a computer to install the driver of HP ePrint mobile and add your ePrint address and print to the HP ePrint file:

  http://WWW8.HP.com/us/en/solutions/business-solutions/printingsolutions/eprintsoftware.html

  Shlomi

• HP OfficeJet Pro 8600 Plus: printer apps

  I can't access my applications from the screen of the printer - I get the message unable to connect to the server, check the internet connections.  Internet connections are very good.  I can print emails to the printer and the apps that I have implemented to print every day - they print daily.  It happened for about two months.  Help

  Hey @Buke1,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the applications on your Officejet 8620 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. On your printer, click web services icon in the upper left corner of the screen.
  2. Click settings.
  3. Click on delete Web Services.
  4. Click the new icon.
  5. Click on accept and Yes.

  Please let me know if you are able to access the apps after the above. If you are, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• problem with Officejet pro 8600 N911g ePrint

  I'm trying to install eprint on my officejet however I have questions. I went into my settings to printers via the IP address and when I click on activate ePrint, it says this:

  Unable to connect to the server.
  
  Check the Internet connection and try again. Or contact your system administrator or the person who set up the printer.
  If your network requires a proxy server address to connect to the Internet, click Proxy enter or check your browser settings.

  As far as I know of I do not use a proxy server address. I have Cox Cable internet and have set the IP to my computer/printer to static. All other work well i.e. wifi printing, iphone/ipad and ext.

  Thank you

  Danny

  The steps below a usually resolve the problem you are experiencing:
  
  1. unplug the power cord at the back of the printer.
  
  2. unplug the power cord at the back of your router (and the modem, if they are separated from the router).
  
  3. wait 20 seconds, then plug the router (and the modem, if necessary) in.
  
  4. wait for 30 seconds, then plug the printer back and power.
  
  5. press the button on the front of the printer ePrint, and it should try to connect to Web Services again.
  
  These steps usually fix the problem, but if it persists, you can try definition of network information static for the printer (which is sometimes useful to stabilize the ability of the printer to get outside of your network to the internet):
  
  1. tap the wireless at the top of the screen of the printer and note the IP address.
  
  2. Enter the IP address in the address bar of a web browser on a computer and press on enter or click the go button browser.
  
  3. the printer status page must be open.  Click network in the upper part.
  
  4. click on networking on the left.
  
  5. Select the Proxy settings.
  Note: If you are prompted for a redirect, click OK.  If you receive a certificate warning, select the option that allows you to continue anyway.
  If you receive an internal system error, refresh the page until it loads the proxy settings.
  
  6. check that all fields are empty.  If they are not, make them disappear and make sure that the Proxy Server requires authentication is unchecked and click on apply.  You should get a success message.
  
  7. click on the network address (IP) on the left.
  Note: If you only configuring IP address and DNS address with a yellow note Configuration, refresh the page until it loads completely.
  
  8. leave automatic IP IP address Configuration.
  
  9 change the DNS address to the manual DNS Server Configuration.
  
  10. enter manual for the manual preferred DNS Server 8.8.8.8 and 8.8.4.4 for auxiliary DNS.
  
  11. click Apply and you should get a success message.
  
  12. turn off the printer for 30 seconds and then turn it on again to force the new settings take effect.

  Let me know if you need additional assistance. Thank you

• OfficeJet Pro 8740: Printer OfficeJet Pro 8740 on-scan shortcuts

  On our old Lexmark printer, we were able to implement "smart solutions" for common tasks. For example, some set choice of values for common jobs: b scan single color in the face of the electronic mail address (b) X the CSAA n & b front e-mail address Y (c) color duplex scan to e-mail address Z.

  I finally found instructions on how to create shortcuts of the printer (the sur-imprimante those who appear via the shortcut icon on the screen of the printer) online.  But what as shown, by clicking on an icon doesn't give not any feedback to create a shortcut. No shortcut has been created.

  It seems that we can manually configure the simple options faced/double-faced and color and black-and-white in the button 'settings' by job. Is it possible to store these common parameters for a shortcut on the printer?

  Hey @DogSnapperATX,

  Welcome to the Forums of HP Support!

  I see that you are looking to create presets on your Officejet 8740 e-all-in-one printer. The printer would have all of the features similar to what you describe.

  Please let me know if that solves your problem or answer your question. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP OfficeJet Pro 8740: switching of paper trays

  I wonder if there is a way to pass using Tray 1 and 2. I would like to keep the legal paper in tray 2 and regular letter paper in Tray 1 format, but can not find a way to select the tray 2 when I want to print legal size documents.

  Hi @apiscopo,

  I just wanted to stop and share my own suggestions for you want to print legal size of tray media your Officejet 8740 2.

  After checking the specs of the printer, you cannot load and print from legal paper in tray 2, and just plain paper is an option.

  The printer's specifications

  

  I know that's not what you want to do however, I hope that helps answer your question.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  Have a nice day

• OfficeJet Pro 8740: HP OfficeJet Pro 8740 Factory Reset

  One person got a new printer to my client and did not wait to introduce myself and put in place.  They disabled USB in the menu and the reset network settings does not return.  How to reset the default printer or re - activate the networking on the printer?

  Hi JFARLING!

  If you don't see any option to restore the factory settings on your JO 8740 printer, you can try to do the following:

  Note: This will restore literally all the settings of the printer, and you will need to do the 'out of the box' configuration after reboot.

  1. Press the power button to turn on the printer.

• OfficeJet pro 8600: error ePrint Server Center

  use ePrint for first time. A email confirmation email sent to my e-mail address of hp but not print. E-mail said to check ePrint centre but I forgot the password. Received the e-mail to reset the password, but when I click on the link get an ePrint Centre message saying server, page refresh error. Have you tried all day and get same message until I do now?

  Hello @Maggie-may ,.

  Welcome to the HP forum.

  I understand that you have a problem with ePrint.

  If you can not reset password, I would call the HP Cloud Services Department.

  They should be able to get the password reset it for you.

  Please contact our Cloud Services at 855-785-2777. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Opening hours:

  Monday-Friday 08:00 - 23:00, sat 09:00 - 20:00 -
  Monday-Friday 07:00 - 22:00, Saturday 08:00-19:00 - CST
  Monday-Friday 06:00 - 21:00, Saturday 07:00-18:00 - MST
  Mon - Fri, 05:00-20:00, Saturday 06:00-17:00 - PST.

• HP OfficeJet Pro 8740: How-to: printing without margins

  Does anyone know how to enable printing without margins to the 8740?  A Google search seems to suggest, there is a power switch setting somewhere, but I can't locate it.  The margin settings are grayed out in Windows that point to the printer.  I am trying to print thank you cards and the design should at least get close to the edge of the page. As it is, the upper part has a. 5 "border and down one. 75 "border. I've adjusted the headers and the preferences of the driver, same facts my clean template without borders, but still not the same top and bottom margins...

  Hello @Ike_Seattle,

  Thank you for showing your interest in the HP Forums! I see that you would like to know how to print without margins. I want to help you.

  I have provided a document to change the setting without borders through the printer driver:

  Print photos (Windows).

  I would like to know if these measures worked for you. You can select the 'accept as Solution' and the 'Thumbs Up' buttons, which will help us and others see that we have the answers! Good luck!

• OfficeJet Pro 8740 all-in-one: with OfficeJet Pro 8740 Incompatible print settings

  I just implemented this new printer and it has two trays of food. I have paper in Tray 1 and the type of Photo paper in tray 2. When I try to print a photo, I get the error Incompatible with:

  Paper size: letter

  Feeder: Photo tray

  If I let him automatic selection of the plateau, he goes to the Tray 1 but if I select tray 2, which is the Photo tray, I get the above error.

  I use paper.

  Any suggestions on how to fix this?  As I said I just installed this machine today, so I'm not really familiar with all it's operating.

  Thank you

  Skeat

  I think that I fixed it now!  I went in the implementation on the printer and went to the management of the status bar and tray 2 by default and now it seems to work.

  Thank you

• HP Officejet Pro 8610: Cannot print from the HP ePrint app on the Internet

  Hello

  I try to print using the HP eprint on my Android mobile application. I am able to print using the WiFi on my phone but when on the go, the app will not find the printer. The eprint service works correctly since I can print when sending an email to my address of email eprint even when I travel but the application won't work when the printer of the Internet access. The printer is connected to a cable modem, wireless. Is there a way to print through the Internet using the HP ePrint app?

  Thanks in advance

  Well after I asked a few friends with iPhones and Android devices to print over the Internet using the application, I noticed that everyone could.

  So, initially, I reset the printer to the factory setting and reconfigured it. It has resolved all the issues I've had both with built in the application to manage as well as my phone. Now I can normally use the HP ePrint app on the internet and printing.

  As a side note, I downloaded an update of the firmware to the printer and most probably caused problems, but, as says the resolved all factory reset.

  See you soon