GoldenGate Instalation?

Similar Questions

• Install Oracle GoldenGate Linux to synchronize two schemas from database on a single server

  Hi all

  I have to synchronize two schemas from database (Oracle 12 c) in a single host RedHat Linux to demonstrate and understand the use of OGG V12.1.2.1.0. I try to do. But it's complicated and confused me because I am new to Oracle and Linux. I followed this tutorial ( install Oracle GoldenGate for Oracle 12.1.2 on CentOS/6.x to 6.x/RHEL Linux 6.x EL ). But it is difficult to understand how I can match with two diagrams of database on a single server.

  
  And I found this tutorial (Oracle GoldenGate on Linux: two-way replication of Oracle 11 GR 2 to Oracle 11 g 2). He said: "" If you have that one host, it may be useful to change the /etc/hosts file to create aliases forhost01.example.com and host02.example.com.". What it really means?

  The other seems to be useful. But it's totally different from 1. Is that this will help my job since I use 12 c Oracle Server?

  Can I get some tips to continue my task?

  Here's another tutorial - http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/goldengate/12c/OGG12c_Integrated_Replicat/index.html

  It has everything set up on a single Linux host.

• Where to install Oracle GoldenGate?

  Hi all!

  In order to CONSOLIDATE the data of 5 databases (3 MS SQL server and 2 servers Oracle) in a single Oracle DB where Oracle GoldenGate should be installed?

  The "Installation and Setup Oracle GoldenGate for SQL Server" States:

  "For a Microsoft SQL Server source data capture, Oracle GoldenGate must be installed on the database server. Do not install it on a remote server. »

  However, is not clear to me what 'remote server '. What is the MS SQL Server?

  Also to copy the data from the 2 Oracle servers where OGG should be installed? The source servers or in the target server?

  Thank you for your time.

  Emanuel

  You get confused about the terms used here

  This document means for the extraction of MSSQL, goldenagte must

  be installled in the same server this database resides on, IE the database

  Server.

  During extraction of Oracle database, logs can be sent to a staging

  Server and then extracted, or can be extracted from the database server

  himself. In other words, extracted can be installed on the database server (normal

  extract) or the staging server (extract from ALO)

  -Lexman

  Wednesday, April 15, 2015 to 18:27, community-admin

• Synchronize two schemas from database on a linux server using Oracle GoldenGate

  I followed this guide ( http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/goldengate/12c/OGG12c_Installation/index.html?cid=9167 & ssid = 0 ) and for two different databases running on the same instance of database schemas.

  
  What I have now is a Linux server with two Oracle database schemas. I have access through my Linux virtual machine. I want to do the synchronization possible between them.

  I use Oracle GoldenGate to make this possible. What should I do now? Goldengate is must be installed in the server too? I'm totally new to this situation. Can someone give me at least the major steps before going to the more comprehensive study?

  Well understood. This helped.

  Install Oracle GoldenGate Linux to synchronize two schemas from database on a single server

• GoldenGate software version question

  Hello

  We are working on the transfer of our application/db between AIX and Linux x86_64.

  Our application uses goldengate software. Our installed software version GG 11.2.1.0.3 SDBA.

  But we want software version greater than 11.2.1.0.25 GG.

  Our sdba says that 11.2.1.0.3 is the same as 11.2.1.0.30 and 11.2.1.0.3 are the newer version than 11.2.1.0.25

  I don't agree with this information.

  Can someone confirm if below are true?
  

  (1) GG version 11.2.1.0.3 is not the same as 11.2.1.0.30

  (2) GG 11.2.1.0.25 version is newer than 11.2.1.0.3

  
  

  Thank you

  Ashish
  

  Can someone confirm if below are true?

  (1) GG version 11.2.1.0.3 is not the same as 11.2.1.0.30 to---> > true, check the release notes when downloading MOS to see what all the bugs are fixed in it.

  (2) GG 11.2.1.0.25 version is newer 11.2.1.0.3---> > true

  You can see the "patches and updates"-> product or family of-> select product, version, version Platform that will list you the latest OGG versions available.

  Concerning

  Vivek

• Can GoldenGate - I put my target database?

  Hi all

  Oracle 9i Db

  RHEL 5.4

  I installed Golden Gate 11g on our Database 9i, source and target texts.

  Can I update our target 9i to 11g database? Without touching or reinstall Golden Gate?

  Thank you very much

  JC

  Hi, Jenna.

  It is not a big problem to configure two repetitions of the target. If you are going to replicate even tables from one source to two targets then I would suggest the below.,.

  1 configure an extraction process that extracts/capture changes from the redo records and written in the files of trail (trail local / source path).

  2. set up two different extracted datapump processes. One for destination1 and one for target2.

  3. configure the replicat process in each target systems.

  You can follow the configuration of DML and DDL replication from the link

  Installation and Configuration of replication DML to the GoldenGate, Oracle 11g | ORACLE-SNA

  http://www.Oracle-SCN.com/DDL-replication-configuration-of-Oracle-GoldenGate-11g/

  It is a one-way configuration between two oracle systems (one a source and a target). But the target should respect the steps twice since you have two target must be configured. This topology replication or architecture is known as one to many (a source and multiple targets). Remaining are all the same.

  Kind regards

  Veera

• How does the GoldenGate keep its metadata

  Whence the GoldenGate store metadata that is? If I add E/R, EXTTRAIL, RMTTRAIL to my Instance of GoldeGate, where GG stores this information?

  I had already 'Berkeley DB' error when issuing the GGSCI command, could he uses Berkeley DB?  I restarted mgr to the Berkeley DB error disappear.

  Hi, when you ADD a process, that information is stored in a .cpe file in the dirchk directory.  It is the control point for the process file and you will notice that a .cpe file gets created with add EXTRACT... even if you do not have a settings file.

  The checkpoint file also has track to process information and it is must match what is listed in the file settings for this process.

  Berkeley DB is for the jagent process if you run with ENABLEMONITORING in your GLOBALS file, which is used when you have GoldenGate Monitor or plug-ins installed OEM.

  Regarding the metadata for the table that stores a process, which is done in memory when the process starts.

  I hope this helps.

• Oracle GoldenGate Veridata Exception (access denied)

  Hi all

  I recently installed weblogic 12.1.3 and Goldengate Veridata server on a Linux machine with success and then successfully created a domain server to administer Veridata. After the opening of the Veridata Web console with the user newly created of Weblogic Server with all privileges of the veridata administration, in the new wizard connection, shows veridata special suite.

  
  

  OGGV-00184: Error Message: com.goldengate.wallet.WalletException: OGGV-80002: put the credentials for conn. IRIS2 failed: access denied ("oracle.security.jps.service.credstore.CredentialAccessPermission" "context = UNIT, mapName = VERIDATA, keyName = CONN. IRIS2' 'write').

  You have the wrong java version, which I assume is java8 which is not taken in charge for 12 c yet so downgrade to java 7. Don't know what flavor your OS, it is that I used this How-to Install Java 7 (Jdk 7u75) on CentOS/RHEL 7/6/5 and restarted downgraded java my weblogic and everything worked as expected.

• GoldenGate extract with ASM does not

  Hi experts,

  I have config GoldenGate with ASM and extract process works do not.

  Source:

  GoldenGate version: 12.1.2.1.0

  Oracle version: 11.2.0.4

  I have config ASM is standardalone

  Settings file:

  extract crosshead

  SETENV ("ORACLE_SID = orcl")

  SETENV ("ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1")

  exttrail ./dirdat/aa

  gguser@ORCL username, password gguser

  tranlogoptions asmuser sys@ASM, password ASMPASSWORD

  table testgg.*.

  Report file:

  ***********************************************************************

  * In the course of a run with the following parameters *.

  ***********************************************************************

  2015-04-03 10:43:20 identifies the character set of INFO-OGG-03059 in operating system

  d as US-ASCII.

  2015-04-03 10:43:20 parameter INFO OGG-02695 ANSI SQL syntax is used for pa

  rameter analysis.

  extract crosshead

  SETENV ("ORACLE_SID = orcl")

  2015-04-03 10:43:20 INFO OGG-02095 successfully set environment variable "O".

  RACLE_SID = orcl ".

  SETENV ("ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1")

  2015-04-03 10:43:20 INFO OGG-02095 successfully set environment variable "O".

  RACLE_HOME=/U01/app/Oracle/product/11.2.0/dbhome_1 ".

  exttrail ./dirdat/aa

  gguser@ORCL username, password *.

  Thank you

  T N

  Hello

  In the present can running in the extraction process.

  I reinstall GoldenGate. This success.

  I assumed install file is not complete.

  Thank you

  T N

• Problem in the Installation of Goldengate

  Hi all

  I order you to put in place the Goldengate on source Db, we are hitting sysdba privilege error, however even has been tried with the sys user.

  DB: 11.2.0.3

  Platform: AIX 6.1

  GoldenGate Version: 11.2.1.0.1

  Created on separate TBS gguser and he said required priviileges.and while implementing ddl_setup.sql... errors are reported as below

  DROP TRIGGER sys. GGS_DDL_TRIGGER_BEFORE
  *
  ERROR on line 1:
  ORA-04080: trigger 'GGS_DDL_TRIGGER_BEFORE' does not exist

  
  No errors.
  No errors.
  No errors.
  No errors.

  GG_USE
  ------
  GGUSER
  No errors.
  No errors.
  No errors.
  No errors.
  No errors.
  No errors.
  No errors.
  BEGIN "GGUSER".initial_setup; END;

  *
  ERROR on line 1:
  ORA-01031: insufficient privileges
  ORA-06512: at "GGUSER. INITIAL_SETUP", line 477
  ORA-06512: at line 1

  
  No errors.

  WARNING: The body of a Package created with compilation errors.

  No errors.
  No errors.
  No errors.

  WARNING: Trigger created with compilation errors.

  No errors.

  No suspicion that's not here or something that can be left to check (bug known, etc...). will be very appreciated...

  Thank you

  GV

  Thanks for the help... I got to know it was version bug affected where it throws error privilege, installed latest patch OGG... and had issue disappear...

• GoldenGate 12 c on the database 11g

  Hello

  Wanted to know if Oracle Goldengate 12 c is compatible with Oracle Database 11.2.0.3?

  Thanks in advance,

  System requirements and Instructions preinstallation - 12 c (12.1.2)

  (Integrated capture mode) To use capture integrated with a database of the source Oracle 11.2.0.3, download and install the 11.2.0.3 specific set of databases to extract patch integrated. See the My Oracle Support 1557031.1 article for all the fixes delivered version of Oracle database. This mode uses a server logmining on the source system or in an Oracle database downstream. For more information,.

  So to use OGG 12 c IC minimum version requirement database are.

  1 > oracle 11.2.0.3 + apply a specific fix - MOS 1557031, or 2 > to use Oracle 11.2.0.4

  On the side of applying it, you can use OGG 12 c apply integrated features (parallelism) with Oracle 11.2.0.3 even without applying a specific patch - 1557031

  Pradeep

• GoldenGate installation on a server shared with multiple oracle instances

  Hello

  If I have a shared server which has several occurrences of oracle running on it, should I install a GoldenGate by server or a GoldenGate instance?

  I am referring to 11.2 GoldenGate on AIX/Linux/Solaris operating systems

  THX

  Delphine

  I have always used just 1 Golden Gate Installation on a server with multiple databases.

• Integration with JMS GoldenGate

  Hello

  I have GG test bed good for a continuous replication work below:

  -OS: Windows XP (local PC)

  -DB: Oracle XE 11.2

  -GG: 11.2

  -Source and target are on the same host database

  Now, I'm trying to send the modified data as messages to Oracle Weblogic Server and then the same eat later.

  Read some articles and its suggested to install 'OGG Java adapter package', but I am unable to find the same online.

  Could someone help me and give me some advice on

  -Where to download 'OGG Java Card package.' of

  -Installation and configuration of the steps to activate the JMS integration.

  Thank you much for the help...

  For GoldenGate Software (for the implementation of data capture & replication) is OTN. GoldenGate adapters (a single download containing the file flat writer & Java (and JMS) adapter) are only on delivery, with updates posted on the support site. It is important that you are running with the latest patches ("patches" on the support site are complete distributions; there is no need to download first delivery and manually apply the "patch". To use the latest maps GG (Java and/or file-writer), just download the patched from the support site version)

  To download the maps GoldenGate delivery (see below to get the latest versions on support site):

  • go to https://edelivery.oracle.com (accept agreements & continue),
  • Select 'Pack produced': "Oracle Fusion Middleware" and "Platform" (e.g..,.) Linux x86_64)-online 'Go '.
  • Follow the link for 'Oracle GoldenGate to Oracle v11.2.1 Media Pack for Linux x 86-64'
  • Download 'Oracle GoldenGate maps V11.2.1.0.0 on Linux x 86-64 for OGG v11.2.1'
    • Oracle GoldenGate adapters v11.2.1 includes:
      • the Java adapter (JMS consumer & producer, Java API user-exit) and flat file generator.
      • a ' generic ' GoldenGate (not database library dependencies, so it can run on a host without a database installed libraries).
    • to install, unzip the archive, 'ggsci' and with ' create sub directories "(that's all)
    • another version of GoldenGate (e.g. GG for MySQL) or GG for Oracle can perform user-output adapters, as long as the same version is used (same "major.minor"); for example, GG for Oracle 11.2 can run GG adapters 11.2. The JMS capture should run in the supplied "generic" version of GoldenGate.

  To download GoldenGate from the support site:

  • go to https://support.oracle.com and login
  • go to "Patches and updates"
  • Click on 'Product or a family (Advanced)' and the following fields:
    • 'Product' is => (start typing "GoldenG... ") => Oracle GoldenGate Application adapters
    • "The release is" => GGATEADP 11.2.1.0 (or higher)
    • "The platform is" => possibly select "Linux x86_64", etc. Or uncheck this line by pressing the sign less '-' symbol
    • Click on "search".
  • Download the largest number of patch, or the latest patch to release date

  The documentation is OTN : Oracle GoldenGate Documentation Library (11.2)

• Newbee Goldengate Questions

  Hello

  I just watch about GoldenGate to evaluate to see if it will do what we want.  I have read a lot of information but have not fallen on the answers to some basic questions rolling in my head.  Any help would be appreciated. These are real newbie questions so I apologize if seem really Basic...

  The prod environment is Oracle CARS 10.2.4 on windows 64.  The new prod environment is Oracle 11.2.0.3 RAC on windows 64.  The test environment used to learn GoldenGate is Oracle 10.2.0.4 (no cars) on windows 64 as a source. It has a copy of the database of operational prod.  The target database is Oracle 11.2.0.3 (no cars) on windows 64.  The target is newly installed with a data base of departure yet created with nothing in it.  The goal is to use GoldenGate as 10.2.0.4 to 11.2.0.3 upgrade path.

  Question 1 - What Versions of GoldenGate?

  Of course, we will use windows 64 bit, GoldenGate 11.2.1.0.1, I guess GoldenGate 11.2.1.0.1 - for Oracle 10 g must be installed on the source, and GoldenGate 11.2.1.0.1 - for Oracle 11 g must be installed on the target?  It is this correct?  This seems obvious, but I don't like to assume anything.

  Question 2 - capacity replication and extract.

  The goal is to replicate the database to 10.2.0.4 on 11.2.0.3 and have an extraction process (probably go) is going to keep the 11.2.0.3 new database, synchronized with the 10.2.0.4.

  Is this possible?

  In the test environment, the 11.2.0.3 database is a new database has just grown.  There is not even the 10.2.0.4 patterns or storage spaces.  To replicate, how many the 10.2.0.4 database must be put in place?  I think the storage spaces must be created, and the users who own the schemas must be created, to match what is in the 10.2.0.4 source?

  Question 3 - a good book?

  Question 4 - a good counselor?

  Thanks again for any advise you can offer!

  Question 1: You're right, well if you have a MOS account, get the latest versions of OGG for your db/OS specific out there, on the site of the Patch.  There is a 11.2.1.0.12 for Oracle 11 g on windows x 64 and 11.2.1.0.4 for Oracle 10 g on Windows x 64.

  Question 2: OGG is not a tool for database replication, but DATA replication software.  You must create the target on the 11.2.0.3 objects db yourself, either with EXP/IMP, RMAN restore, etc.  There are suggestions to make a first loading here: http://www.ateam-oracle.com/?s=goldengate+initial+load and using OGG in conjunction with the initial load, you can capture changes to the data (and DDL for Oracle for Oracle, but stick with the basics of DML for now) here on the.  The link above has a guide to migrate too.

  Question 3: I happened to have contributed to this, so I'm a little biased, but I don't know there are many others out there: Oracle GoldenGate 11g Handbook: Robert Freeman: 9780071790888: Amazon.com: books

  Question 4: Forums like this one and Oracle Learning Library (research on goldengate): Oracle Learning Library (OLL)

• GoldenGate Replicat DLL error

  Hey guys,.

  When I try to set up a demo of using GolenGate data replication to replicate data between SQL Server 2008 to Oracle 11 g, I met a fatal error.

  I set up a SQL Server database and a database of Oracle on the same PC and installed GoldedGate.

  When I call a process to replicate like this:

  replicat paramfile reportfile dirrpt/inload.rpt dirprm/inload.prm

  An error was generated,"oraxml10.dll is missing, could not start this program.

  Anyone can understand the root cause?

  Here is my configuration of GoldenGate:

  Source:

  GoldenGate Version:

  Oracle GoldenGate interpreter for SQL Server

  Version 11.2.1.0.2 OGGCORE_11.2.1.0.2T3_PLATFORMS_120724.2205

  Windows x 64 (optimized), Microsoft SQL Server on July 25, 2012 03:04:52

  OS platform is Windows 7, 64 bit.

  Correct process:

  GGSCI (chenyj-WorkPC) 1 > find param inext

  sourceistable

  SourceDb ggs

  rmthost 127.0.0.1, mgrport 7777

  rmtfile d:/ggsora/dirdat/ex

  table dbo.emp.

  Target:

  GoldenGate Version:

  Oracle GoldenGate for Oracle shell

  Version 11.2.1.0.1 OGGCORE_11.2.1.0.1_PLATFORMS_120423.0230

  Windows x 64 (optimized), Oracle 10 g on April 23, 2012 04:55:04

  Database:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

  PL/SQL Release 11.2.0.1.0 - Production

  "CORE 11.2.0.1.0 Production."

  AMT for 64-bit Windows: Version 11.2.0.1.0 - Production

  NLSRTL Version 11.2.0.1.0 - Production

  OS: Windows 7, 64 bit

  Replicate the params:

  GGSCI (chenyj-WorkPC) 1 > inload view param

  specialrun

  The end time

  SetEnv(ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1)

  SetEnv (ORACLE_SID = ORCL)

  user ID, password ggs GGS

  extfile d:/ggsora/dirdat/ex

  sourcedefs d:/ggsora/dirdef/emp.def

  card dbo.emp, target ggs.emp;

  Any help is appreciated. Thanks in advance.

  Looks like you are using the wrong build OGG for your Oracle environment. Your version of GoldenGate is for Oracle 10 g:

  Target:

  GoldenGate Version:

  Oracle GoldenGate for Oracle shell

  Version 11.2.1.0.1 OGGCORE_11.2.1.0.1_PLATFORMS_120423.0230

  Windows x 64 (optimized), Oracle 10 g on April 23, 2012 04:55:04

  But your Oracle 11 g database:

  Database:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

  PL/SQL Release 11.2.0.1.0 - Production

  "CORE 11.2.0.1.0 Production."

  AMT for 64-bit Windows: Version 11.2.0.1.0 - Production

  NLSRTL Version 11.2.0.1.0 - Production

  The construction of 10g of GoldenGate can't Oracle 11 g. Please download and install the build Windows GoldenGate for Oracle 11 g.

  Best regards

  Mary