Good FRU for replacement of bad X100e LCD?

I have a X100e who is a few months out of warranty; and recently the screen started to go empty (always on, so the backlight is not the problem...). It has been in a State where the angle changes if it lights - sometimes to the top/transfers of pressure lights up the screen. I took apart and found the thick round cable to enter the LCD of the graphics unit (not one of the antennas, maybe DC-in?) was extremely worn out, so that I could see traces of copper. I am guessing that is the question, even if another cable is also possible, I've looked at the hardware Maintenance Manual, but am unsure of what FRU, it corresponds to. What I'd rather do is if possible to replace the entire LCD, complete with cables, but I want to check what I mean. Should FRU parts numbers labels I look for? (I've already replaced the keyboard, as well as the above information should do me if I have correctly diagnosed).

There are 2 choices of cable according to your model 4-digit number. Most of the models use 45M 2885. For that one, and here's one on eBay from a seller, that I use all the time for $9 http://www.ebay.com/itm/Lenovo-Thinkpad-X100e-Fru-45M2885-LCD-LED-Video-Cable-Tested-/280830398533?p...

Use of models starting with 3507 45 M 2918, which is hard to find, but you can purchase it from IBM here: http://www-304.ibm.com/shop/americas/webapp/wcs/stores/servlet/default/TopCategoriesDisplay?cntrfnbr...

According to your description, I am not 100% sure which part you mean. I sent a PM with my email address and you can send a picture if you wish.

Tags: ThinkPad Notebooks

Similar Questions

  • Need to find the correct reference for replacement screen Aspire 5742

    Hello

    I need to find the correct part for replacement screen Aspire 5742.  The backlight does not work anymore, and I already bought a UPS to see that this model/version does not use a UPS (as the backlight is LED and integrated in the element of the screen).  I find the somewhat confusing model numbers table.  The full model version seems to be:

    5742 - 464G50Mnnk

    S/N: [redacted to comply with guidelines]

    SNID [redacted to comply with guidelines]

    This seems to be a very good laptop that belongs to a mine Guigou, but not worth repair at the local dealership, and I'm sure I can replace the screen myself if I can get the right part, having already dismantled the set of sieves and to be an electronic engineer.

    Either way, I guess that this version of model is the 5742, not the 5742 G (even if the model number has a 'G' in it: some of the confusion).  Any help would be appreciated.

    Part numbers for the 15.6 TFT LCD for the Aspire 5742 are:

    LK.15605.004
    LK.15605.010
    LK.15606.009
    LK.15608.007
    LK.15608.011
    LK.1560A.004
    LK.1560D.010
    LK.1560E.004
    LK.15605.019
    LK.15606.012

  • The AirPort Express Terminal is good enough for me?

    I need a new wireless router to replace my Netgear WNDR4300 'antiques '.  The network is only 2-3 laptops and iPhones 1-2 at a time, over a printer and Chromecast device.  We occasionally video stream, but not often.  Critics say the AirPort Express is best purchased as an add-on to an existing network, but I can't justify more expensive options from the airport.  I don't need the 11ac 802 that offer other options, and it seems that margin would be a problem, because it is limited to 5 GHz.  We have a two-storey house. Is the simple terminal AirPort Express good enough for my home network?

    The AirPort Express, pourraient deliver similar performance to your old Netgear router in terms of signal strength and the beach... but the only way to know with certainty if the Express will be good enough for your needs is to try in your home.

    Try to locate the Express up high on a shelf or Cabinet, if you can, to help in the dissemination of the signal.

    Fortunately, if you buy through Apple, you have one day 14, no questions asked return privilege, so if the Express does not provide the performance you need, you can return the unit for Exchange or a refund.

  • Satellite A200-12 years - looking for replacement speakers

    Hello everyone.

    I'm new to this forum. I hope someone can help me.

    I'm looking for some reference Harman Kardon speakers on my laptop Satellite A200-12 s PSAE6E-03F024FR. The left speaker is HS and I want to replace it. In-between by opening up the PC, I could take a Ref:

    GEC PK230006Q00 1 to 078J (which is recorded with a sticker pasted on the speaker).

    I googled ==> nothing...
    Anyone know where I can proccurer me the pair of speakers?

    I could find another speaker Ref of a repair site US ==> V000100210 but I don't know if it's the good laptop for my REF.

    Thank you in advance.

    Portnaouak.

    Hi PORTNAOUAK

    I think that all the speakers for Satellite A200/A205 must be compatible with your laptop.
    I found this reference numbers: V000100220 he left and right speakers s kit for Toshiba Satellite A200/205/A210/A215
    The speakers are not Harman Kardon.

    But the V000100210 are pregnant Harman Kardon

  • ThinkPad T410 collapsed after that I replaced the bad srew near the fan to work!

    Hello
    my Thinkpad T410 stoped working after that opening and blow the dust out of my fan.
    by mistake I replaced the bad srew near the fan... that would be a mojor to my motherboard damage prevents it from start.
    When i replaced the battery in my laptop and kicked it... all I saw my battery I icon started flashing.

    additional information:
    whenever I press the power bottom, I hear the noise for less than a second of the hard drive started to load and then nothing.

    I would be very grateful for any help

    Note from Moderator: Edition subject to the content of the game.

    A long screw can damage the keyboard only.

  • Replaced the bad motherboard and cannot restore from recovery disks

    I replaced a card Pegatron M2N78 - mother in a Pavilion p6130y PC and I tried to restore to the recovery disks, but he says that the restore disks will not work on this system.  Really, I care is in accordance with the operating system (Vista), I don't want to pay for what I have already.  Research I've done shows that the old motherboard was known to be defective.  During the troubleshooting process, the recovery process was started, but then is broken when the card mother crapped out and didn't not recognize SATA devices.  When trying to start, he knew and then wouldn't recognize them, usually about 75/25% respectively.  Because of this, I can't just start it on the HARD drive and update the existing drivers and update the Vista license.  I have more money to buy only 7.

    How can I get the installed operating system or perform a full recovery on this system?

    Hello:

    The recovery disks only works on exact material they were made for.

    Because you have installed a different motherboard, at microsoft a new motherboard = a new PC.

    OEM licenses are licenses that computers come with HP (and any other manufacturer).

    This means that they are good only for that specific PC and cannot be transferred to another PC or motherboard.

    http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx#fBid=38vuxXQoPQY

    Q. a PC with an operating system of Windows OEM may have its motherboard updated and keep the same license? What happens if it was replaced because it was defective?
  • What is a good quality for photography printer without breaking the Bank?

    I mainly used HPs, but it seems lately that these break quickly. Their quality does not seem to be as good as it used to be. I also bought the big pack of best quality at Costco Kodak photo paper that they quit carrying and I can't seem to conclude that more.  When I think that I found the quality is NOT the same as it was when I bought it at Costco. I print my own prints up to 11 x 14.

    What is a favorite for all book? I used glossy, which is a good paper for Matt printing?

    In addition, for someone else, who uses much ink I did, Costco sells large inks, they have more and last so much longer than replacements you buy at Wal-Mart, Staples, etc.

    I'll buy a Dell XPS 8900 with the 6th generation of processor Intel Core i7-6700. Specifically, I buy this PC for my photography business and accounting transactions.

    Documents of Canon are very good. If you like try iced Pkatinum Pro. In addition, Red River papers are good. You can order a pack sampler of them.

  • How to replace a bad IDE disk with a USB Flash drive system - and have all the functionality of XP Pro SP3

    How to replace a bad IDE disk with a USB Flash drive system - and have all the functionality of XP Pro SP3
    Given a PC without hard disk...
    How can you use a flash drive instead?
    So, indeed, the USB key works as an SSD...
    I saw online options that gives partial functionality of the system... and an option that is more than $100 (more than the system's worth)...
    None of these options are acceptable in the circumstances.
    It is an effort to create a machine for a particular use, built from a recycled pc for which hard drive was removed and destroyed by the original owner...
    The criterion is that it must work just like it was a mechanical drive running xp pro sp3 with all updates, etc...
    Thanks for any help.

    You can not install XP on a Flash as his unsupported drive. Your only two options are a traditional hard drive or Solid State Drive (SSD).

    J W Stuart: http://www.pagestart.com

  • Can anyone suggest a good diet for the HP p6214y

    I get upgraded my HP P6214y with a new GTX 460 graphics card and I need to know a good diet for the card.

    Can anyone suggest any good? I'm looking for 550w and more. Money is not a problem.

    Karen,

    The Corsair VX 550 will work as the Corsair HX 650.  I have the Corsair HX 650 and the NVIDIA GTX 460.

    How to replace a power supply.

    How to replace a video card.

    These "how-to" HP articles should be useful.

  • Good UPS for two machines

    I have two mac pro which are used as file servers, so use the power minimum and idle most of the time. I would get a UPS that could hold them for 5-10 minutes (time for a script to execute in order to turn off the power). APC seem to have some nice models and I think that the SC620i would be a good choice but cable management appears to be serial. Can anyone recommend a good UPS for me that has a usb connection and a software for a mac to allow me to run a script to stop the machine.

    Thank you

    APC builds good material and wait a couple of years of life on their part before the batteries die, and that becomes the true cost. for other questions, you can start here

    http://pondini.org/OSX/ups.html

  • Parachute does not not between iOS and Mac devices... Does anyone have a good solution for it nor a lot of garbage to support

    Parachute does not not between iOS and Mac devices... Does anyone have a good solution for it nor a lot of garbage to support

    You want the solution? Why not tell us what Mac and Apple, mobile devices you have the OS and version?

    Also what troubleshooting steps you took?

    We do not have a crystal ball, and we're not sitting next to you.

  • A good mouse for a Macbook Pro?

    Can anyone recommend a good mouse for a Macbook Pro, so fed up with the Magic mouse connectivity issues.

    Microsoft and Logitech do wireless mice that use a small IR dongle. I use one for my office lab because I also have BT connectivity following the intervention of BT problems. The dongle stores neatly in the mouse when not in service, and it is small enough that you could probably keep plugged in all the time on the MBP. Mine is Logitech, it has 4 buttons with wheel acting as a middle-click. It came with software to program additional buttons. Overall, I prefer the Magic Mouse but it's a close.

  • FN F6 and F7 for less bright and shiny LCD will not work with XP on A305-S6845

    modules common to xp... not on this model...

    added value for xp... not on this model...

    FN F6 and F7 for less bright and shiny LCD will not work with XP on A305-S6845

    C2D t8100, chipset intel, no normal fn keys FN + F5 doesn't seem to operate 'naturally', as do some others that I don't use, but the idea that I spent 8 hours to find all the xp drivers for this thing and can NOT dim my lcd...! ******ed...!!!

    The Toshiba REAL will raise your hand... Please?

    you KNOW millions are without downgrading from vista to xp, GIVE US THE DRIVERS...!

    I had to just to get the rest, scout intel boooted to viata while just to get the wifi, then start on xp, install the wifi, then had to get drivermax (amazing) to find all the drivers

    but no one knows where the FN drivers (no pun intended...)!

    None of the drivers Vista FN will get them to work with XP

    XP drivers for other models will not be installed on this model

    It comes from * ed

    1200 for a machine that cannot dim the lcd...!

    It is unlinke toshiba, how long could possibly take something for xp on to the A305 recompile!

    If someone has an A305 with c2d, get drivermax, they have now all other drivers of my job of paving 99.999% perfect...

    I will also publish on 4shared.com in a massive zip...

    Ok

    Send me a fix...!

    (too late for a refund...!)

    TOSHIBA! everything I own is TOSHIBA... !!! three laptops from toshiba... just give my xp for my A305 drivers...!

    If you come from the United States, I'm afraid, you're on the wrong place. Try to post the same thing on http://community.compuserve.com/n/pfx/forum.aspx?webtag=ws-laptop&redirCnt=1 it's US forum.

    Here are mostly from Europe and Toshiba Europe has nothing to do with Toshiba WE. The company, but may be different marketing strategy and support.
    Maybe you'll find people with the same opinion.

    > 1200 for a machine that cannot dim the lcd...!
    I take you seriously with your opinion, but after reading this, I think that this comment has nothing to do with reality. Recovery of installation image and you'll have the complete functionality for laptop. You have the stick of Windows Vista on your laptop?

  • A good software for tracking of swimming for the rings of the activity

    Hello

    I'm a happy user of my watch stainless steel 42. I use it for all my training and I get pretty obsessed by filling out the rings of the activity

    I do not swim a lot and I was wondering if anyone knows a good app on the watch that will add data from swimming to the rings?

    (I know that I can add the data to the application of health on my phone, but it does not count to complete the rings)

    Does anyone of you found a good app for that?

    Best regards

    Peter

    I just use the 'Other' activity to record my swimming activity. It will record the exercise even if I'm not wearing the watch.

  • Legacy with defective power supply unit. Looking for replacement source

    RND4000 (ReadyNAS NV + v1 [v3]) group legacy with a power failure. Looking for replacement source. Not after replacement free of charge since it is obviously out of warranty and end of product life. However, it is a little expensive Kit to replace. If I did, I would still want to use it as a backup of synchronization for the new.

    I was unable to find any power supply corresponding by the name given to the unit (ST-220FUB-05F), all the results of my research resulted in a power different with smilar looks and namesake. Main differences are slight changes in the output rails, different output connectors. Also include a fan that mine didn't, perhaps a clue to the failure there.

    I was shocked to find that he was / is none replaceable fuse in the power supply and if there was a gauge commonent that he was unable to do the job because a cracket big mosfet to clean his radiator, think that's what it is, hard to see in here. Unable to find a replacement, I'll have to try to replace the component that is visibly damaged. Not easy because it's crowded in there and may fail because there are perhaps other failing components that didn't explode or evacuate. I really need ot get this unit backup and running.

    Help, please. Consider the purchase of an equivalent of second hand RND4000 for parts. See you soon.

    Hello EkDor,

    This replacement of power supply was free until supplies last and I heard they already ran out of it.

Maybe you are looking for

  • Podcasts don't download from 10.0.2 updat

    iPhone 6 s more, iOS 10.0.2 Subscribed podcasts will be updated but not download them since the last update. Download via WiFi, do not use sync to synchronize with iTunes. Suggestions?

  • I improved the new, lost my old and now cannot get back firefox - help!

    I replied to the facebook message that urged to upgrade my firefox - and after going through the movements and directions, downloaded the new firefox system. In my haste, I did not notice the almost transparent icon warning me not to do. Once again,

  • Satellite A200 - I can boot from PCI express card?

    I have a laptop A200. I recently bought a PCI expresscard HD. Many people have asked this question already on many sites and regarding several different brands and models of laptops. According to anadtech and other techys the only way to do an Expres

  • Need help with identification card WiFi Acer Aspire V Nitro VN7 - 792G - 79 LX

    I just got an Acer Aspire V Nitro VN7 - 792 G - 79 LX that I bought recently a few days ago. I'm not thrilled with Windows 10, so I installed Windows 7 x 64 on it, instead. I only had a chance, until I had to go to work (I drive a semitrailer tractor

  • WAP561 To Telnet and SSH

    Hello We have two WAP561 devices and they delivered with firmware 1.0.3.4. In this firmware release notes, there is open opposition with reference number CSCty22825, declaring that telnet and ssh is disabled in the interface chart and SNMP. In the no