WAP561 To Telnet and SSH

Similar Questions

• Telnet and SSH

  Is it possible to have a different public IP (i.e. 66.102.7.000) address to telnet and SSH for the ASA 5510 remotely?  If it is possible, how you would install the telnet and SSH?  The config is attached.  Thank you.

  Laura

  laurabolda wrote:
  Thanks for your prompt response, Jon.
  For clarification, if my computer IP address is 66.102.7.10, can I SSH to the ASA (outside interface 109.66.25.80)? If I can, how would you set it up on the ASA?  Is it the same command as your previous response?
  Thanks.
  Laura
  

  Yes Laura he would be-

  SSH outside 66.102.7.10 255.255.255.255

  Jon

• Information about TelNet and SSH

  Hi all... IM new here

  Its my first qstion

  Q: I would like to know more about TelNet and SSH... How... can its work you explain this...?

  Hi Muhammed,

  Welcome to the Microsoft forums.

  I understand that you need to know about TelNet and SSH. I'll help you with the information.

  The Telnet utility to connect to other computers over a local network or on the Internet. Unlike a modern Web browser, Telnet uses only the controls text to interact through the network. While this method is a little outdated, it is still used by advanced users to test a network or perform maintenance on the system. Telnet is included with Windows 8, but is disabled by default. You can use the control panel to activate Telnet and then perform the network with application basic commands.

  a. open Control Panel. This can be done through charms, Windows + X, or by conducting a search on the start screen.

  b. Select programs from the main menu.

  c. click on or turn off Windows features turn on and approve the application administrative.

  d. check the Telnet Client and Telnet Server (depending on what you need).

  e. click OK.

  You can see the following TechNet article to learn more about TelNet.

  http://TechNet.Microsoft.com/en-us/library/cc732339 (v = ws.10) .aspx

  SSH (Secure Shell) allows you securely transfer files between computers on a network. All the data involved in the SSH session is encrypted in order to protect against hackers. Once SSH is installed on your computers and servers, you can create passwords for individual users, using programs included in the installation of SSH. If you need to SSH to a remote computer, you need to download a third-party program to connect via SSH.

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.

• Telnet and SSH on PIX515E does not

  I have two PIX515E (primary and Fail-over) and I can't access it via telnet or SSH.

  I can access only once they have restarted and then they react to me and close the connection.

  the version of the show from the primary is as below:

  Cisco PIX Security Appliance Software Version 8.0 (3)

  Version 6.1 Device Manager (1)

  Updated Wednesday 6 November 07 19:50 by manufacturers

  System image file is "flash: / pix803.bin.

  The configuration file to the startup was "startup-config '.

  Primary up to 3 days 19 hours

  up to 13 hours and 18 minutes failover cluster

  Material: PIX-515E, 128 MB RAM, Pentium II 433 MHz processor

  Flash E28F128J3 @ 0xfff00000, 16 MB

  BIOS Flash AM29F400B @ 0xfffd8000, 32 KB

  Hardware encryption device: VAC + (Crypto5823 revision 0 x 1)

  0: Ext: Ethernet0: the address is 0019.e762.f577, irq 10

  1: Ext: Ethernet1: the address is 0019.e762.f578, irq 11

  The devices allowed for this platform:

  The maximum physical Interfaces: 6

  VLAN maximum: 25

  Internal hosts: unlimited

  Failover: Active/active

  VPN - A: enabled

  VPN-3DES-AES: enabled

  Cut - through Proxy: enabled

  Guardians: enabled

  URL filtering: enabled

  Security contexts: 2

  GTP/GPRS: disabled

  VPN peers: unlimited

  This platform includes an unrestricted license (UR).

  Serial number: 810417710

  Activation key running: 0x7785a916 0x349cafef 0x49afea88 0x8bbd3f92

  Modified configuration of enable_15 to 12:49:25.499 EEDT Sunday, July 26, 2009

  can someone help me solve this problem please.

  I would upgrade to 8.2. I don't have the bug number, but you should be able to find it in the Bug Toolkit.

• Issue of Telnet and SSH on Cisco 3750.

  I turn on Cisco 3750 and everything so I wasn't able to connect in the area. I even changed the source interface and update transport under the VTY lines input method, no luck.

  Can I choose to disable SSH by removing the corresponding lines of configs and RSA keys. And I changed the entry to transport back to Telnet. After the reboot of the switch, I'm still not able to connect despite the fact that the box is accessible.

  Any help?

  Thank you

  Jean-Marie

  Hello

  This should help to confirm the configuration and troubleshooting SSH on your device: -.

  http://www.Cisco.com/c/en/us/support/docs/security-VPN/Secure-Shell-SSH/4145-SSH.html

  I hope this helps.
  Kind regards
  Dinesh Moudgil

  PS Please rate helpful messages.

• Removal of Telnet and FTP (keep the SSH/SCP)

  I don't want the sensors to run Telnet and FTP, services because I want to force anyone to connect to them to use SSH/SCP.

  I edited the /etc/initd.conf and put in comment lines that start these services. However, this may not be the 'best method' because after that I tried that all of a sudden the sensor stopped listening on port 22 and I couldn't connect with SSH (of course). When I Uncomment the lines telnet and ftp in the inetd.conf, SSH/SCP/port 22 is open again. Weird. What should I do to remove these services?

  BTW: on an unrelated note, the/dev/iprb0 (command and control) interface is the card that is assigned an IP address and is used for the connection of the sensor. / Dev/spwr0 is the interface which doesn't listen for traffic in promiscious mode and does not have an IP address assigned, right?

  Thank you

  Erik

  Run sysconfig-sensor, there should be an option in the secure communications box to disable telnet and ftp. Sysconfig-sensor will then take care to make the changes for you.

  4220 and 4230 sensor devices, your statements are correct for the interfaces.

  NOTE: 4210, 4235 and 4250 sensors have names of different interfaces.

  Marco

• Telnet or SSH to AP 1142

  Hello

  I am trying to connect to an access point to distance within our network... is it possible to activate telnet or ssh access point by WCS or https. Please let me know

  Knockaert

  WCS, you could push a model AP.  On the 'the AP settings' tab, you can enable ssh and telnet access and then apply it to the AP.

  http://www.Cisco.com/en/us/partner/docs/wireless/WCS/6.0/Configuration/Guide/6_0temp.html#wp1064409

• enable the telnet and password

  Or remove them. Hello. My goal is to one or two internal connections on each Cisco device and then allow Radius Authentication for telnet or SSH?

  Is there a simple way to do this on a Cisco device?

  Thank you

  Dwane

  Oh, I see what you mean, use local authentication failure RADIUS! You're almost right.

  AAA authentication login LINE1 group local RADIUS

  line vty 0 4 'or '.

  line vty 0 15

  authentication of connection LINE1

• Firewall XP slows telnet and pop requests to other servers

  with xp firewall WE telnet takes about 10 seconds to connect to my linux server. workstation on the same POP form xp server takes about 10 seconds
  with xp firewall OFF it connects instantly
  I've tried doing the fomr even another machine winxp and this problem does NOT occur. So it seems that I have a machine that has a firewall problem
  all windows updates and patches have been installed
  This dbeen has now lasted about a year. time to find out how to fix :)

  Well, for all those interested, ive worked the definitive answer to this problem underway long myself for "xp firewall slows down applications to other telnet servers and pop.

  After doing a few capture and analysis of communication between my workstation and server, I noticed the server sending some 113 applications port to my work in response to the pop stations and requests for telnet access and I think than ftp also.

  Port 113 refers to "ident" username for authentication on the servers running of authentication such as "identd". If the workstation does not respond, then it may delay the connection. The solution is to put an exception on the firewall of my computer such as windows xp firewall to allow port 113 through.

  To do, it is very easy for all of us here are the steps for your Windows XP workstation:

  Start | Control Panel | Windows Firewall | Exceptions | Add Port. 113 TCP Port number. Comment: The authentication of the user name to the server with the ident Protocol

  So there you have it. Finally... INSTANTLY connect and response of the connection for pop, telnet and ftp :)

  Edward Jozis

• PIX and SSH - access to PIX via SSH

  Need help with PIX and SSH

  Objective: Connect to PIX via SSH from the 10.1.1.50 IP address behind inside the interface on the PIX using local aaa on PIX.

  Current settings:

  hostname pix1

  example.com domain name

  CA generates the key rsa 1024

  example username password abc123 privileges 15

  include authentication AAA ssh inside 10.1.1.50 255.255.255.255 local

  SSH 10.1.1.50 255.255.255.255 inside

  Thanks for any help!

  Try this:

  AAA-server local LOCAL Protocol

  the ssh LOCAL console AAA authentication

• Disable telnet, enable SSH

  What is the best way to disable telnet on the public (T1) interfaces of my router and enable SSH? Can I do this without setting up access lists?

  Thank you

  Diego

  You can. Type

  'transport input ssh.

  on the line vty 0 4 and it will only accept ssh connections.

  If you add access lists using access-class, it will add another level of security.

  You should also generate a RSA key for the router global configuration using the command mode,

  generate encryption rsa key

  Before you type this command, make sure that the domain name is configured on the router.

  IP - domain name

  HS key mypubkey rsa cryptographic will show you the RSA key that is generated.

  HTH

• Virtual Telnet and HTTP virtual

  Anyone know if he is expected to make a "Virtual SSH' or a 'virtual HTTPS protocol' in the firewall Code any time soon?

  6.3.1 pix code and more authentic https ip address virtual http. I'm not aware of a ssh vitrual characteristic.

  Here's a quote from the doc 6.3 pix link http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/config/mngacl.htm#wp1017011

  PIX Firewall Version 6.3 introduces a secure method of exchanging names of users and passwords between a web client and a PIX firewall by using HTTP with SSL (HTTPS). HTTPS encrypts the user name and password and secures the transmission.

  Previous versions of firewall PIX, then authentication of a web browser using an AAA server, obtained the user name and password for the HTTP client in plaintext.

  Add the keyword following the aaa command to enable this feature:

  AAA authentication secure-http-client

• Access Cisco profile 42 "Console, syslog and SSH

  Hello

  I profile 42 "with the version of the TCNC 4.2.1265253 software

  I have query on Cisco profile 42 "and 52"

  (1) profile 42 ", I activated the Serial Port Mode 'on '.

  but I am not able to connect to profile 42 "(à l'intérieur de codec peut être c20) the console with onCOM1 rate 38400 baud rate"

  Is it disabled in the profile 42 "code?

  (2) I have configured security-> Audit-> IP server of syslog and logging-> external

  But any change in configuration, I do it on profile 42 "is not loggin to syslog server.

  But other devices such as the VCS and MCU send syslog server syslog message.

  I have attached the profile 42 "screen shot, is there anything else required for syslog?

  (3) profile 42 "with TCNC 4.2.1265253 - SSH software version is not supported?

  even if I enable SSH mode 'on' I'm not able to ssh to the machine.

  (4) we have another point of termination profile 52 "with active encryption version TC4.2.1.265253 software.

  I am able to connect through SSH, but the problem is, it accepts the connection without asking for user name and password...!

  I have attached the profile 42 "GUI config screenshot

  Pls. suggest, if you have the solution to all these questions.

  Thank you

  Rajesh

  Hello

  I tried on my SX20 and I see the messages are sent to the port TCP 514:

  [dderidde-sx20: / var/log/eventlog] $ tcp port 514 - vv x tcpdump

  10:27:03.870003 IP (tos 0x0, ttl 64, id 2654, offset 0, flags [DF], proto TCP (6), length 145)

  DHCP-dgm2-vl300-144-254-13-42.Cisco.com.53345 > drop.cisco.com.514: flags [P.], cksum 0xe629 (correct), seq, ack, 1:94 1, winning 137, the options [nop, nop, Rec. TS 45532890 3096889259 val], length 93

  0x0000: 4500 4000-4006 e792 90fe 0d2a E...^@.@...* 0a5e 0091

  0 0010 x: 0 to 30 a01e d061 0202 dd1b cc8c d 014 3b 09. 0... a... M;.

  0 x 0020: 8018 0089 e629 0000 0101 080 a 02 b 6 c6da...) ..........

  0 x 0030: c7ab 3 38 c b896 363rd 4a 61 3233 2031 6e20... <86>Jan.23.1

  0 x 0040: 303 3 a 31 3236 286th 3720 6529 2073 6f6e a 0:26:17. (none) .s

  0 x 0050: 645 b 7368 3233 3039 345 d 3 has 20 7061 6d5f shd [23094]: .pam_

  0 x 0060: 756 6978 2873 7368 643 a 7365 7373 696f unix (sshd:sessio

  0 x 0070: 3 a 20 7365 and 7373 696f 6e20 636 6e29 c 6f73 n):. session.clos

  0 x 0080: 6564 2066 2075 7365 7220 726f 6f74 ed.for.user.root 6f72

  0x0 0090: a

  I found this DDT which tells me to use the TCP protocol as a "Workaround".

  CSCts98937 - EX60/EX90 and impossible to get work of Syslog C90/C60

  Symptom:

  Not seeing the SNMP or Syslog traffic on port 514 UDP.

  Conditions:

  Normal operation.

  Workaround solution:

  Use port TCP 514...

  Note:

  Make sure you restart the codec after you enable the Syslog.

  Contact the engineering/documentation if TCP is the only mode of transport.

• VPN and SSH key phenomena

  Hi all

  I was in possession of a rather strange problem.

  Description of the problem

  I can't SSH in my ASA box within my network private and the Internet when it is not connected to the VPN without problem

  If I SSH to my ASA box of in a remote access VPN session, I get the error "ssh_exchange_identification: Connection closed by remote host".

  REMOTE_VPN_POOL = 192.168.250.1 - 192.168.250.5/24

  LOCAL_LAN = 192.168.2.0/24

  The strange thing here is that I can't SSH to my device without wire (192.168.2.2), then to my ASA (192.168.2.1) - see the text in bold below.

  The below and paste the job gives a good example of what is happening. Apart from this, the ASA works very well in terms of RA VPN. Any help on how to solve this problem would be greatly appreciated.

  See you soon,.

  Conor

  VPNC: A Linux Cisco VPN Client. Works like a charm most of the time.

  [[email protected] / * / ~] # vpnc - port-local 501 /etc/vpnc/home.conf
  VPNC launched in the background (pid: 15830)...

  [[email protected] / * / ~] # ping 192.168.2.1 (private IP of my firewall)
  PING 192.168.2.1 (192.168.2.1) 56 (84) bytes of data.
  64 bytes from 192.168.2.1: icmp_seq = 1 ttl = 255 time = 8.33 ms
  64 bytes from 192.168.2.1: icmp_seq = 2 ttl = 255 time = 8.09 ms
  ^ C
  -ping 192.168.2.1 - statistics
  2 packets transmitted, 2 received, 0% packet loss, time 1310ms
  RTT min/avg/max/leg = 8.091/8.211/8.331/0.120 ms

  [[email protected] / * / ~] # ping 192.168.2.2 (my IP's private wireless device)
  PING 192.168.2.2 (192.168.2.2) 56 (84) bytes of data.
  64 bytes of 192.168.2.2: icmp_seq = 1 ttl = 255 time = 9,34 ms
  64 bytes of 192.168.2.2: icmp_seq = 2 ttl = 255 time = 8.90 ms
  ^ C

  -ping 192.168.2.2 - statistics
  2 packets transmitted, 2 received, 0% packet loss, time 1248ms
  RTT min/avg/max/leg = 8.902/9.122/9.343/0.240 ms
  [[email protected] / * / ~] # ^ C
  [[email protected] / * / ~] # ssh [email protected]/ * /.
  ssh_exchange_identification: Connection closed by remote host
  [[email protected] / * / ~] # ssh [email protected]/ * /.
  Password:

  Wireless #.
  Wireless #ssh-l conor 192.168.2.1

  Password:
  ************************************************
  * Private system. No unauthorized entry or use *.
  ************************************************
  Type help or '?' for a list of available commands.
  Firewall >
  

  Hey Conor,

  Could you please paste the output of ' run HS | SSH"below.

  Kind regards

  Anisha

• VPN client and ssh to the external interface of the ASA

  Hello world

  I was testing clientless ssl in my lab at home.

  When you're connected via vpn without customer, I am able to ssh ASA outside interface, but when I use ssl vpn only I can't ssh to the external interface of the ASA.

  Need to figure out how I can ssh to the external interface of the ASA using clientless ssl vpn?

  Concerning

  MAhesh

  Mahesh,

  When you are on clientless SSL VPN to your customer is not limited routes of the Internet, isn't being NATted etc. If ASA is set to allow ssh from outside, then the VPN SSL without client user is no different from any other.

  A the user SSL VPN full tunnel can have any or all of these factors at play. One of them can cause the impossibility to access the ASA outside interface via ssh. I see the configuration to tell you which one (or more) is to blame.