Google + (g +) transparent box problem

Similar Questions

• "Menu bar Spry" expanding box problem.

  Hello

  I wonder if anyone knows how to solve a 'expansion bar problem', associated with vertical menus bar spry.

  This problem occurs especially in Internet Explorer 10 and 11. All texts and images on the right of the menu spray are projected down to below the lower menu bar.

  The page is displayed in Firefox and Google Chrome 100%-125%, but the same thing would happen if I Zoom in more than 125%.

  The only potential incompatibility problem by Dreamweaver is the "expand the bar problem.

  Thanks in advance!

  Hello Ben,

  Thanks a lot for your suggestions.

  It seems that the problem had nothing to do with a "expanding box problem.

  I managed to solve the problem by introducing

  Michael

• [Combo Box problem in Google Chorme + ripple]

  How can I see the results in the ComboBox so to open it one can not

  Please check the picture below: HERE

  My case is executed.

  The problem is solved by replacing the line 58 to bbui - 0.9.4.js

  bb.device.isRipple = (navigator.userAgent.indexOf('Ripple') >= 0);
  

  with

  bb.device.isRipple = (navigator.userAgent.indexOf('Ripple') >= 0) || window.tinyHippos;
  

• How to fix the google homepage search box spread in ff38

  For some reason, the 'search box ' on the google home page is "biased" when I switch to ff38 (actually it started to happen for anything more than about 24 version). The page displays normally except the search box is shifted to the left about 3 inches. Also when I type in the text is also not display correctly (not centered in the box). It is not "deadly", but very annoying. Any ideas on how to solve this problem would be appreciated. Thank you

  You are welcome.

  It is perhaps possible to modify the script to better behavior or use the CSS code in userContent.css instead.

• ID CS5.5 Mac - transparency printing problems custom size 13 x 21

  I try to print a screen printing positive transparency. The document is 13 x 21. I have a roll of 13 extended transparency which I cut a 21 "piece. I print on an EPSON 1400.

  I can not get the output to this szie file. It cuts the image within 8.5 x 11 limit each time.

  I have:

  -set a custom size in the print dialog box

  -Click on Page Setup in the print dialog box and set the custom size here, ignoring the warning to the subject it is not not printing ID dialog box

  -l' Preview in the dialog box will look perfectly oriented to the right size in the small tile

  -J' have tried everything I can think of to try to get in sync and correct output formats

  -I went to the PDF to try, fail again

  Is there someone who can help with some step by step to a process that works?

  Adobe ID CS5.5, EPSON Stylus Photo 1400, Mac Lion 10.7.5

  Only, I can't understand how this could be so difficult and little intuitive. Any idea would be freaking wonderul.

  Wow! Sudden incidental finding on this incredibly frustrating issue.

  I had found information that the EPSON 1400 should be able to print 44 "long output by default. I was looking specifically for one to find people who had printed large and panoramic images and came across a photography website of the United Kingdom where a person mentioned that he had written a software that would allow this printer print beyond 44 ". That sounded a lot.

  BUT, the last post on the thread of a guy says how he was able to print up to 44 '' for an EPSON 1400 with ease. The solution, said, was that the WIDTH of the print in the page layout area must be LOWER at 13 ". Why? No explanation.

  So I reset my size custom at 12.5x21 inches and BAM! First attempt to InDesign printed successfully. I can work with the margin.

  Anyway, in the case that everyone runs into this problem, it works. Here is a link to the post of 2009 that mentions this as info about printing more than 44 ".

  This one is solved.

• .PNG / gray browser box problem

  I know IE6 is almost all the way out now, but if possible I would not run in this .png issue where there is a grey box behind the image on this logo: http://401ak47.com

  Is there a way around this problem without going through a .gif file?

  Looks like you're doing PNG from Photoshop. If so, look here for a repair.

  Fireworks and GIMP can produce a transparent PNG IE6 can handle. Save as PNG8, transparency alpha with these applications. The logo will look very well on modern browsers. In IE6, it will show up with transparency 1 bit (like a GIF file).

  There is no need to add to the HTML code.

  FWIW, IE6 is about 5% use now. I would just give up on making considerations of design for her.

• Text entry box problem

  I need a text input area appear to be solid on the screen. I changed the setting to transparency in the properties of the text box entry to 0% and the box appears strong in the hat 2, but when I saw the project, the box appears transparent. How can I get the box display solid when the user sees it?

  Whenever I have problems of transparency, there is inevitably a problem with transitions and timing.

  These problems in this way:

  (1) check for the problematic object synchronization settings:

  (a) how long he has the value to display in all?

  (b) how long it melted in to?

  (c) how long it has melted to?

  (2) check the timeline and find everything that makes a break from the slide (button, checkbox, the text box itself). On the timeline, these objects will have an icon pause in the Middle showing where they to pause the timeline.

  (3) if there is something to pause on the slide:

  (a) is there a pause the slide before the object which has a chance to fade in? By example, if the text box fades 0.5 seconds, but the blade is a break from 0.3 seconds, the slide will pause while the text box is always semi transparent. If so, make slide it once the object has finished it is melted in a break.

  (b) is it pause the slide after the object has already begun to falter? It's one that gets me usually. Captivate does not add the fade in time for the total display time, subtracting it. So, if the text box is set to display to 1.7 seconds, with a loss of 0.5 seconds, Captivate will begin to fade the text box to 1.2 seconds (1.7-0.5 = 1,2). If the blade stops at 1.5 seconds, the text box will be 0.3 seconds it's fade out, making it completely transparent. In this case, extend the total of the object display time so that it starts to mitigation AFTER the slide has suspended.

• transparent filter problem

  I regularly visit a Web site were members of the community can submit/attach photos with each submission blogfeed on their own profile page. When more then 2 photos are submitted/joint there are only 2 thumbnails shown and one line "and x" (x = quantity of photos).
  When I clicked on this line in the past, I could always see these photos in a new window, but now, I got the message "Clear filter" (very often) What should I do? The website (home page) is excluded from pop up block.
  Hope someone could help me.
  I use the Dutch language Firefox with Windows 7 Professional.
  Thanks in advance

  It is difficult to say what the issue could be without actually seeing. May I reproduce if you posted a link to the site? Also, do you think you could provide a screenshot?

  If you need help to create a screenshot, please see How to make a screenshot of my problem?

  Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . This will help us to visualize the problem.

  Thank you!

• Firefox or Google? Search box after accidentally hitting a few key shortcut/s

  Hello.
  I cleaned my keyboard of windows 7, the other day, but this time, while he was. I had firefox (26.0) open with google (normal no chrome version). I cleaned the bottom two lines ctrl keys, enter etc & all F main lines.
  When I looked at the back of the screen, I have had a few open boxes, I just closed the and everything was fine except I have a few boring box on the right-hand side on related searches where images and additional information or research if not excessive on search that results will appear as a white box just empty but always the writing is left justified.
  photo here:
  http://www13.zippyshare.com/v/94254689/file.html
  I looked upward on the last 2 days that I could press on the Firefox shortcut keys and google I tried solutions for these, but could not seemed to see everything I tried it worked. I don't know what I did or what we call this box. Anyone know how I can get rid of it to the related results of normal default search centered with no search box with images and information on the right side it there? I ran out of ways to watch after trying many things and not knowing who it is urgent even all the buttons f again slowly one at a time. I really don't want to reset firefox I've read you can make and lose all the Add-ons and email and settings of a shortcut if I can find out who the mystery is just is harder than I thought to find this one.
  Thank you for reading.
  (p, s, I also tried the mode firefox safe so that the add ons are disabled, but it's none of them among the things that I tried to fix it)

  Hello Nicqi, this is just a feature that google adds to its search results - it is not caused by or related to press you the keys: https://support.google.com/websearch/answer/2620861

  in the case where you use adblock more, you can add this custom element hiding filter to get rid of the knowledgegraph box:

  google.com##li.kno-result
  

  or you can use a userContent.css file with this content:

  @namespace url(http://www.w3.org/1999/xhtml);
  @-moz-document domain(google.com) { li.kno-result { display:none!important; } }
  

• Since the last update, there is a transparent box in the lower right corner of my screen. What should I do to get rid of him? It is only in Firefox, IE not.

  There is a clear, rectangular box that just appeared after the upgrade, but it won't go away. Can you please tell me what to do to fix this? I have known idea what to do. I have Windows 7 and Firefox, the most recent upgrade for laptop / desktop PC on PC.

  If that doesn't work in Firefox Safe mode then disable all extensions (Tools > Modules > Extensions) and then try to find out who is causing by allowing an extension at a time until the problem reappears.

  Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Firefox 5 does not work with the AVG and Google toolbar, among other problems

  I downloaded Firefox 5, invited by Filehippo. Among other things, my anti-virus sw were not compatible, the Google toolbar disappeared and could not be put back because I was using an old browser! I did a system restore with the result that Firefox did not work at all. I went back to version 4, only because a guardian program requires firefox, otherwise I'd returned to Windows Explorer. It cost me a lot of valuable time.
  I tried to make this complaint under the feedback, and the button send didn't work.

  Google must update the program toolbar for Firefox 5.0.

  The 7.1.20110512W version Google toolbar works in Firefox 5.0 using the add-on Compatibility Reporter, I tried it myself because of the large number of comments on the problems of the GTB.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/add-on-compatibility-reporter/

• Toshiba WL863 takes too long to start and its Set Top box problem

  Hello

  Aside from no YouTube on the TV - is not a real question

  I have 2 problems with WL863 TV:

  1. the TV takes long time to turn on (between 2.5 and 4 minutes).
  2. the sound of the TV from a Set Top box (HDMI) changes from time to time, as if a low-pass filter has been activated, living just a whistling noise, but returns to normal every few minutes.

  I use the latest firmware.

  This would have something to do with the settings, or do I have to send the TV for repair under warranty?

  Please give some suggestions.

  Thank you

  > 1. The TV takes time to market (between 2.5 and 4 minutes).
  Have you noticed that in the past, or the first day of purchase?

  If not, I recommend you load the default settings (reset) TVs and check it again.
  In the case where the reset won't help you, it might be that a question and device TV related material must be verified by the service agent.

  > 2. The sound of the television to a Set Top box (HDMI) changes from time to time, as if a low-pass filter has been activated, living just a whistling noise, but returns to normal every few minutes.

  This problem could be linked to the connected Set Top Box and not the TV device.

  TV receives the audio signal from the external, connected HDMI (in your Set Top Box case) device. Check if the same audio issues would be noticeable by using another external device like a DVD or BD player. In case the sound issue would be noticeable only with decoder, the question isn't related to the TV, but to the external device.

• Add Server 2012 R2 Server Manager servers dialog box problem

  I have a problem in 2012 R2 Server when you add a remote server to all server management interface.   Using the dialog box add servers to add a workgroup server (no configured DNS server), I added the problem of server using the IP address.  A dialog box appears that says "can't resolve host would you like to add it anyway?  For awhile do this, I clicked 'No', but finally clicked on Yes and the server by its server name has been added.

  However, I can not access this server remotely, make sure that it is in the list of approved first hosts.  I have the correct IP addresses and have firewall advances for troubleshooting I can connect on the server locally with an administrator account.

  Removing the server from the remote management console, and then add that it does not solve the problem as server name solves always in the dialog add a server with the credentials apparently wrong.  It is the only server of four that I made this mistake, the other three work great after choosing 'Yes' to add the server non - solve anyway.

  My question is, how do I clear the credentials of server 'broken' out of the 'Add Server' dialog box to the server properly.  The added server is another Server R2 2012.  I changed server names and addresses IP, but the dialog box always detects the server with the new information and still not will not properly add it to Manager remotely.

  And the idea of how to do to erase the old credentials?

  Thanks in advance.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• NI USB box problem when Labview ends abnormally

  Hi all

  recently, I had a problem with the NI USB box used in Labview.

  I wrote a very simple program and it runs in Labview 2011. Basically, it reads data from a NI USB box and also send data back. According to my knowledge (I don't know if it's good or bad), when the Labview is arrested shortly how it is completed, the USB box should also stop working. But the thing is, when the Labview program ends abnormally, let's say I directly terminate from the windows task manager when it is running, all the ports of the box USB will hold their final statements until I restart Labview and write new values to them.

  This could be very dangerous. For example, when I use the USB box to control the power of a power supply, the Labview program crashes (which happens often), the power supply box and USB power will continue to work until I restart the program again. I tried several different types of boxes NI USB on PC and the problem still occurred. So I was wondering if there is no mechanism that prevents such problems or if I can do something programmatically to avoid it.

  I thank very you much for your help and your time.

  Best regards

  Sun

  Sun,

  Another area where you can have a misconception: LabVIEW is not control USB DAQ device. The LabVIEW program called the DAQ driver program (typically DAQmx or DAQmx Base) and pilots say the OS to send messages via the USB port of the DAQ hardware. So stop the program LV, intentionally or accidentally, does not say the data acquisition driver and the OS USB driver to put the DAQ hardware in a State course.

  If you have a configuration where the LV program can be stopped before it can send orders "Safe state" DAQ hardware, you cannot ensure the DAQ hardware stops correctly.

  There are a few screws that have been written in LV "watchdog", but even those who depend on the operation of LV execution engine.

  You should carefully rethink the entire system, make security issue, one of the main objectives at the beginning.  Most likely, you will find that you need to a separate device, hardware clock or PLC, if the software fails to stop him.  You should also consider whether you need a real-time operating system to avoid some of the problems associated with the standard desktop operating systems.

  Lynn

• Google and applications synchronization problem Acer E700 liquid

  good people! See good will, I have a problem with the liquid acer E700 that recently as end up buying because it's a good motive, because there a lot of ideal characteristics, the problem will not sync well and clear just a LG optimus l5 and me iva well synchronized since I was good and timely notifications, but the problem with the acer liquid esque ivan me well until that I went back and clear to see messages incoming, I open the apps because if not, I hear no that join, apps are the google +, the gmail and meeting places and not, I despair many because he is no way for the two wifi and 3G was not good and I wonder if there is an update that corrects this problem I hope answers or at least tell me that there is this update for this problem, Hello and thank you

  Welcome to.