Toshiba WL863 takes too long to start and its Set Top box problem
Hello
Aside from no YouTube on the TV - is not a real question
I have 2 problems with WL863 TV:
1. the TV takes long time to turn on (between 2.5 and 4 minutes).
2. the sound of the TV from a Set Top box (HDMI) changes from time to time, as if a low-pass filter has been activated, living just a whistling noise, but returns to normal every few minutes.
I use the latest firmware.
This would have something to do with the settings, or do I have to send the TV for repair under warranty?
Please give some suggestions.
Thank you
> 1. The TV takes time to market (between 2.5 and 4 minutes).
Have you noticed that in the past, or the first day of purchase?
If not, I recommend you load the default settings (reset) TVs and check it again.
In the case where the reset won't help you, it might be that a question and device TV related material must be verified by the service agent.
> 2. The sound of the television to a Set Top box (HDMI) changes from time to time, as if a low-pass filter has been activated, living just a whistling noise, but returns to normal every few minutes.
This problem could be linked to the connected Set Top Box and not the TV device.
TV receives the audio signal from the external, connected HDMI (in your Set Top Box case) device. Check if the same audio issues would be noticeable by using another external device like a DVD or BD player. In case the sound issue would be noticeable only with decoder, the question isn't related to the TV, but to the external device.
Tags: Toshiba
Similar Questions
-
After the upgrade of RAM it take too long to begin and start windows.
Original title: laptop
Hello
I have (HP compaq presario V6615EN)Core 2 duo 1.83 GHz2 GB OF RAMWindows vista Home premium 32-bitIt took 20 seconds to start and windows boot(Yes, only 20 seconds)When I upgraded my ram to 4 GB it takes too long to start and windows bootnearly 160 secondsHello
1 - is the operating frequency of the matches with the 'old' RAM newly installed?
2. how many RAM sticks are there?
Let's try the following steps:Also launch memory diagnostic tool. How will I know if my computer has a memory problem?
http://Windows.Microsoft.com/en-in/Windows-Vista/how-do-i-know-if-my-computer-has-a-memory-problem
If there are 2 RAM sticks, remove one RAM Strip and check the speed. You can also try to swap the RAM sticks and check.
For more help, I suggest that you post your question in the HP support forum.
-
HP ENVY 15-j110, takes too long to start
Hey guys I have HP ENVY 15-j110 I bought recently, but now, after a month it takes too long to open and sometimes only a black screen.
He
Product number is this #ACJ F6C58PA
answer as soon as possible.
This could be due to the application running in the back ground and starting applications. Try
Selective startup:
http://Windows.Microsoft.com/en-us/Windows/Run-Selective-startup-system-configuration#1TC=Windows-7
-
Hyperion EPM services take too long to start
Hyperion 11.1.2.3
Windows 2008 R2
32 GB of memory on each server
Java 1.6.35
Server environment four (Foundation/FDMEE, planning, Essbase and SQL server).
Some how it takes too long to start the services of Hyperion. Using the batch script to start all services. Can someone advise where to start looking. Here's the log of HyS9Planning_SERVER-sysout. If this can give an idea
< 12 February 2014 12:40:34 hours EST > < Info > < security > < BEA-090905 > < disabling CryptoJ JCE provider auto-intégrité for better startup performance. To allow this control, enter - Dweblogic.security.allowCryptoJDefaultJCEVerification = true >
< 12 February 2014 12:40:35 hours EST > < Info > < security > < BEA-090906 > < change the default Random Number Generator in RSA CryptoJ of ECDRBG to FIPS186PRNG. To disable this change, specify - Dweblogic.security.allowCryptoJDefaultPRNG = true >
< 12 February 2014 12:40:35 hours EST > < opinion > < WebLogicServer > < BEA-000395 > < according to the contents of the extensions added at the end of the classpath directory:
D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\audit-client.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\css.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\ctg_custom.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\ldapbp.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\opencsv-1.8.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\registry-api.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\wlpool.jar>
< 12 February 2014 12:40:35 hours EST > < Info > < WebLogicServer > < BEA-000377 > < start WebLogic Server with Oracle JRockit (R) Version R28.2.5-50-153520-1.6.0_37-20121220-0844-windows-x86_64 of Oracle Corporation >
< 12 February 2014 12:41:19 hours EST > < Info > < management > < BEA-141107 > < Version: WebLogic Server 10.3.6.0 Mar 15 08:52:36 PST Nov 2011 1441050 >
< 12 February 2014 12:41:43 hours EST > < emergency > < management > < BEA-141151 > < Management Server could not be reached at http://hydevf01.uts.mcmaster.ca:7001. >
< 12 February 2014 12:41:43 hours EST > < Info > < Configuration Management > < BEA-150018 > < this server will be started in mode of managed server independence in the absence of the admin server. >
< 12 February 2014 12:41:43 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >
< 12 February 2014 12:41:43 hours EST > < Info > < WorkManager > < BEA-002900 > < self-adjusting Initializing of thread pool >
< 12 February 2014 12:41:44 hours EST > < opinion > < LoggingService > < BEA-320400 > < D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >
< 12 February 2014 12:41:44 hours EST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log00014. Log messages will continue to be logged in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log. >
< 12 February 2014 12:41:44 hours EST > < opinion > < Log Management > < BEA-170019 > < D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log server log file is opened. All events in the log server-side will be written to this file. >
OracleFileSSOWalletImpl.getWalletData: enter...
OracleFileSSOWalletImpl.getWalletData: System.getProperty (user.name) = sp_hydevadm
OracleFileSSOWalletImpl.getWalletData: dummy sso (shared) file locking...
OracleFileSSOWalletImpl.getWalletData: locking (shared) file sso...
Oracle Wallet: Pocket size 12573
OracleWallet: getSecretStore
OracleSecretStore: load flow wallet
OracleSSOKeyStoreImpl: engineLoad
OracleKeyStoreSpi: Load flow wallet
OracleKeyStoreSpi: Safe opening 0
OracleKeyStoreSpi: Safe opening 0
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: Safe opening 0
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: Safe opening 0
OracleKeyStoreSpi: Safe opening 0
Treatment TP 0
Storage TP 0 as CN = Entrust .net Secure Server Certification Authority
TP-1 treatment
Storage TP 1 as CN = Entrust .net Secure Server Certification Authority 1
Treatment of TP 2
TP 2 storing as authority of Certification CN = Entrust .net (2048)
Treatment TP 3
Storage of TP 3 in CN = GTE CyberTrust Global Root
TP 4 of treatment
TP 4 storing as OU = Secure Server Certification Authority
Treatment TP 5
TP 5 storing as UO = class public primary Certification Authority 1
Treatment TP 6
TP 6 by storing like UO = class public primary Certification Authority 2
TP treatment 7
TP 7 by storing like UO = class public primary Certification Authority 3
OracleKeyStoreSpi: Storage Secret0
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Storage Secret1
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Storage Secret2
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Storage Secret3
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Storage of Secret4
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Storage Secret5
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Storage Secret6
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Storage Secret7
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Keystore loaded
OracleWallet: getSecretStore
OracleFileSSOWalletImpl.getWalletData: enter...
OracleFileSSOWalletImpl.getWalletData: System.getProperty (user.name) = sp_hydevadm
OracleFileSSOWalletImpl.getWalletData: dummy sso (shared) file locking...
OracleFileSSOWalletImpl.getWalletData: locking (shared) file sso...
Oracle Wallet: Pocket size 3941
OracleWallet: getSecretStore
OracleSecretStore: load flow wallet
OracleSSOKeyStoreImpl: engineLoad
OracleKeyStoreSpi: Load flow wallet
OracleKeyStoreSpi: Safe opening 0
OracleKeyStoreSpi: Safe opening 0
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: Safe opening 0
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: Safe opening 0
OracleKeyStoreSpi: Safe opening 0
Treatment TP 0
Storing TP 0 as UO = class public primary Certification Authority 1
TP-1 treatment
Storage of TP 1 in CN = GTE CyberTrust Global Root
Treatment of TP 2
TP 2 by storing like UO = class public primary Certification Authority 2
Treatment TP 3
TP 3 by storing like UO = class public primary Certification Authority 3
OracleKeyStoreSpi: Storage Secret0
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Storage Secret1
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Storage Secret2
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Storage Secret3
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Keystore loaded
OracleWallet: getSecretStore
< 12 February 2014 12:42:11 hours EST > < opinion > < security > < BEA-090082 > < security initialization using security realm myrealm. >
< 12 February 2014 12:42:55 hours EST > < WARNING > < JTA > < BEA-110503 > < migration tool (the AdminServer for JTA manual migration policy, or the captain Singleton for automatic migration JTA strategy) is not available. Jump JTA TRS restoration because isStrictOwnershipCheck is [false]. This may cause corruption of potential TLOG if TRS of Planning0 has been migrated to the backup server and the backup server accesses the TLOG of Planning0. More security can be achieved by setting isStrictOwnershipCheck [true]. >
< 12 February 2014 12:42:56 hours EST > < opinion > < LoggingService > < BEA-320400 > < D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\access.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >
< 12 February 2014 12:42:56 hours EST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\access.log00030. Log messages will continue to be logged in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\access.log. >
< 12 February 2014 12:43:01 hours EST > < WARNING > < oracle.dms.jrockit.jfr > < DMS-58041 > < The JRockit FlightRecorder class declares that it is not active and so the DMS cannot use it. >
< 12 February 2014 12:44:01 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server changed to STANDBY status >
< 12 February 2014 12:44:01 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >
Using the OraclePKI provider
taken javax.net.ssl.TrustManagerFactory supported
taken javax.net.ssl.KeyManagerFactory supported
Using the OracleJSSE103 provider
< 12 February 2014 12:47:37 hours EST > < WARNING > < security > < BEA-090668 > < ignored the role 'Admin' resource deployment ' type = < url >, application is DMS Application #11.1.1.1.0, contextPath = / dms, uri = / ">".
< 12 February 2014 12:51:03 hours EST > < WARNING > < oracle.adfinternal.view.faces.partition.FeatureUtils > < ADF_FACES-30130 > < without taking into account the dependence of the feature on the function "AdfDvtCommon". There is no such feature. >
ATTENTION: From post-deployment of ADF library jar on WebLogic Server. "Provider-lazy-inited" init-param missing LibraryFilter? Ignore this warning if the ADFJspResourceProvider is not used.
On the road: ADF library non-ADFJspResourceProvider after deployment
Finishing: ADF library non-ADFJspResourceProvider after deployment (millis): 16
null
< 12 February 2014 12:51:17 hours EST > < opinion > < Cluster > < BEA-000197 > < listening for cluster communications using unicast cluster messaging >
< 12 February 2014 12:51:17 hours EST > < opinion > < Cluster > < BEA-000133 > < waiting to synchronize with other members in the planning stages. >
< 12 February 2014 12:51:22 hours EST > < WARNING > < Log Management > < BEA-170011 > < The LogBroadcaster on this server has no messages to the server admin log. The server administrator can not run. Emissions of message to the administrator of the server will be disabled. >
< 12 February 2014 12:51:48 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to ADMIN >
< 12 February 2014 12:51:48 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed for RESUMING >
< 12 February 2014 12:52:24 hours EST > < opinion > < Cluster > < BEA-000162 > < "async" replication service to start with remote cluster address "null" >
< 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default" is now listening on 172.26.55.119:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >
< 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default [2]" is now listening on fe80:0:0:0:0:100:7f:fffe:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >
< 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < channel 'by default [5]' now listen on 0:0:0:0:0:0:0:1:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >
< 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default [4]" now listen on 127.0.0.1:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >
< 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "[1] by default ' is now listening on fe80:0:0:0:385e:468:a776:2aac:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >
< 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default [3]" is now listening on fe80:0:0:0:0:5efe:ac1a:3777:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >
< 12 February 2014 12:52:24 hours EST > < WARNING > < Server > < BEA-002611 > < Hostname "HYDEVP01.uts.mcmaster.ca", corresponds to multiple IP addresses: 172.26.55.119, fe80:0:0:0:385e:468:a776:2aac % 14 >
< 12 February 2014 12:52:24 hours EST > < opinion > < WebLogicServer > < BEA-000358 > < started WebLogic independent server managed by "Planning0" for the domain "EPMSystemHYDEV" running in Production Mode >
< 12 February 2014 12:52:24 hours EST > < WARNING > < JMX > < BEA-149510 > < could not establish connectivity JMX with the Administration Server AdminServer to < JMXServiceURL:null >. >
< 12 February 2014 12:52:39 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,430 for the configured timeout of 5 seconds >
< 12 February 2014 12:52:39 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,427 for the configured timeout of 5 seconds >
< 12 February 2014 12:52:39 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,429 for the configured timeout of 5 seconds >
< 12 February 2014 12:52:40 hours P.M. > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,428 for the configured timeout of 5 seconds >
< 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,441 for the configured timeout of 5 seconds >
< 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,442 for the configured timeout of 5 seconds >
< 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,443 for the configured timeout of 5 seconds >
< 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,439 for the configured timeout of 5 seconds >
Do you still have this problem after restarting the server?
See you soon
John
-
Hearing of 2015 CC takes too long to start
Hearing of 2015 CC takes too long to start. As more than a minute.
Using administrator rights does not make a difference.
Fresh install... even though I updated from Windows 8.1 to 10 Windows (Windows updater) and I had hearing in Win8.1 so... is there any cleaner Adobe application that I could use to solve this problem?
I found the solution!
Simply find the file dynamiclinkmanager.exe on any folder of Adobe products, that is having this same problem, and remove the extension (.exe) format to it.
Confirm the action and open the hearing as quickly as it should.
-
My laptop HP Pavilion G6 takes so long to start and other issues.
Hello! I have problems with my laptop, I have a HP Pavilion g6. This isn't an old computer I only got it for less then a year. My laptop takes so long to start. When I turn on the laptop it takes so long to come to the screen where u enter your password and when I type my password it takes so long to come to my home screen and now its freezes sometimes when I throw things like facebook or other things. I tried fixing it by having my laptop for a problem look. He found a problem that I've corrected, but it did not help. I tried google, and he says things like u might have a lot of cookies, junk files, virus or cache etc (I have an anti-virus installed in my computer as well). Very confusing! Its my 1st laptop after a very long period and this information is very confusing to me. If anyone can help!
Original title: problem with my windows 8.
Security Essentials scans files as they are downloaded from the Internet, Yes. In my opinion, no other additional internet security is necessary as long as you practice good habits like not downloading websites you really trust and take seriously the messages of warning and never just by clicking 'allow' unless really trust you him.
Also on startup programs, you have no need to again use the program. If you disable on this auto start, you can still open the program when you want normally (the only difference is that the program cannot start itself without you more).
-
Toshiba satellite with Windows8 takes too long to start (5 min)
I have a
Toshiba satellite i7 L845; 6 GB; 64 bit
I turn off a lot of start up programs with MSCONFIG.exe (except Windows); When I reinicieted it works correctly (restart in seconds), but if you turn off and on again, the slow restart reappear.
Your advice, I will apreciate.
Hello
Check with Toshiba Support, their drivers and documentation online and ask for their
Forums about known problems.Toshiba - Forums
http://laptopforums.Toshiba.com/Toshiba - Contacts
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contactToshiba - drivers - access your model
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=downloadToshiba - Support
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jspYou must also use a process of elimination methods to determine what startup programs
affect your boot. And it could be more than one and even a combination. Remove items
you need not start.========================================
These should help:
Ways to improve the performance of your PC
http://Windows.Microsoft.com/en-us/Windows-8/improve-PC-performanceMaintenance & performance
http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-8&V2H=win7tab1&V3H=winvistatab1Crashes Windows or freezes
http://support.Microsoft.com/kb/2681286How to speed up your PC
http://support.Microsoft.com/kb/2746761/en-us=======================================================
You use a 3rd party antivirus/antispyware/security program? If so many people
can cause slow start from the bottom.Check with the support of the system Maker (manufacturer of motherboard for customized systems), their
online resources and the drivers and ask questions in the forums about known problems.
Updating the BIOS , drivers of low level chipset and embedded and separate major
device drivers (anyone who can have an impact on the speed of startup and performance).Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
According to needs). Win + D key calls the office and using Win Key active / disable the office and
Splash screen.Check startup programs.
Right-click in the left lower corner - Manager of tasks
Or Windows key + X - Manager of tasks
Or right click on the taskbar - task managerCheck the Startup tab.
More troubleshooting:
How to perform a clean boot for a problem in Windows Vista, Windows 7,
or Windows 8
http://support.Microsoft.com/kb/929135Other programs to help:
Autoruns - free - see what programs are configured to start automatically
When your system boots and you connect. Autoruns also shows you the complete list
locations of registry and files where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Explorer - free - find out what files, registry keys, and other objects
processes have open, which DLLs they have loaded and more. This unique
powerful utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx=======================================================
If necessary:
Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
settings) or even a restore. Be prepared to re - install the programs, applications will remain.
And having redundant backups of your files on the disk main hard is always a
good idea.Windows 8 includes special discount methods (keep files and settings) or a reset
(new installation remove all).How to restore, refresh or reset your PC
http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PCHow to create a system image to refresh your PC in Windows 8
http://support.Microsoft.com/kb/2748351How to update Windows 8
http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.htmlHow to reset Windows 8
http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.htmlIf you need a repair disc:
Create a system repair disc
http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-discHow to create a "system repair disc" (CD/DVD) in Windows 8
http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.htmlHow to create a recovery USB in Windows 8
http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
OfficeJet 7500 a take too long to start to print.
Hello
I recently purchased the Officejet 7500 has, for its ability to large format. Very often, after clicking 'Print' in my app Apple Pages, a very long time (several minutes) will pass like the computer "looks" for the printer. Also, as often, once she found the printer it will take a lot of time to 'connect' to the printer. Last night at 23:00, I clicked on print. This morning at 07:00 it was always "sends data to the printer." The document is a simple pagle.
When I try to use the HP utility he also takes a lot of time to 'communicate' with the printer and just hanging there.
This problem is not always the case. Sometimes I can print several pages without interruption, but all too often, there is a long long long time. This NEVER occurred with my previous Epson printer.
The printer is directly connected to my Mac via the USB cable.
Someone has an idea what could be the problem and how can I fix?
Thank you
Brian
Thanks, I found this article, and it seemed to do the trick.
-
Satellite M30x-129 takes too long to start
After pressing power botton (blue), that it takes up to 15-30 min before the computer laptop start start, something crashes @ select the boot device...
I changed the RAM, I'm on my way to the processor,Please I need help with this...
Thank youHello Suji
What happen exactly when you press the power button / stop?
Toshiba welcome screen appear immediately?
You can enter BIOS settings immediately after your Satellite market? -
Computer laptop dv7 takes too long to start
About two weeks ago, I buy a laptop pavilion dv7-4165dx because I really like the features of the laptop. When I turn on the computer, it took about 10 minutes to start after the initial installation. I got at best buy because I thought it was a faulty hard drive, because any given work very well, at best buy told me that the laptop was fine and had no problems. But I still have the same problem because take laptop about 3 to 4 minutes at the start he crashes in the welcome message, after I typed my password. I have already updated all drivers and BIOS, can someone help me.
Hello
I would get Best Buy to replace the notebook that you really shouldn't have these kinds of issues with a whole new machine. It could be that the Windows image is bad, or some other hardware related issue. I would definetely get that he replaced however.
All the best,
DP - K
-
After changing the MagSafe adapter, macbook pro takes too long to start the video
After changing the map of 85 W MagSafe, time to start the computer has become excessive (2 minutes). The screen lights up immediately, but the video appears after 2 Min.
Once started, the performance of the computer are OK.
This anomaly occurs after the change of the adapter, it's never happened before.
Try a SMC reset:
https://support.Apple.com/en-us/HT201295
Ciao.
-
Data dictionary query takes too long.
Hello
I'm using ORACLE DATABASE 11 g.
The following query takes too long to run and not give the result. As I've tried a few tricks SQL Oracle but it forces developed.
Please guide me what to do? to run this query in a fast paced mode...SELECT distinct B.TABLE_NAME, 'Y' FROM USER_IND_PARTITIONS A, USER_INDEXES B, USER_IND_SUBPARTITIONS C WHERE A.INDEX_NAME = B.INDEX_NAME AND A.PARTITION_NAME = C.PARTITION_NAME AND C.STATUS = 'UNUSABLE' OR A.STATUS = 'UNUSABLE' OR B.STATUS = 'INVALID';
Thanks in advance...Your query is incorrect. It returns all tables if A.STATUS = "UNUSABLE" or B.STATUS = "INVALID". Most likely, you meant:
SELECT distinct B.TABLE_NAME, 'Y' FROM USER_IND_PARTITIONS A, USER_INDEXES B, USER_IND_SUBPARTITIONS C WHERE A.INDEX_NAME = B.INDEX_NAME AND A.PARTITION_NAME = C.PARTITION_NAME AND (C.STATUS = 'UNUSABLE' OR A.STATUS = 'UNUSABLE' OR B.STATUS = 'INVALID');
But the above will return sous-partitionnee tables not valid/no usable index. He ain't no non-sous-partitioned tables partitioned index/index not valid/not usable with same partitions in the form of tables not partitioned with valid/no unusable indexes. If you want to get any table with indexes not valid/not usable, you outer join that's going to hurt even more performance. I suggest you use the UNION:
SELECT DISTINCT TABLE_NAME, 'Y' FROM ( SELECT INDEX_NAME,'Y' FROM USER_INDEXES WHERE STATUS = 'INVALID' UNION ALL SELECT INDEX_NAME,'Y' FROM USER_IND_PARTITIONS WHERE STATUS = 'UNUSABLE' UNION ALL SELECT INDEX_NAME,'Y' FROM USER_IND_SUBPARTITIONS WHERE STATUS = 'UNUSABLE' ) A, USER_INDEXES B WHERE A.INDEX_NAME = B.INDEX_NAME /
SY.
-
My daughter Air2 IPad takes too long to save. It is plugged in, connected to wifi and the screen is locked. Any tips?
How long is too long? If it lasts for more than a few hours - and even that is too long in my humble OPINION - then something is wrong. Completely backup, because it will not terminate in any case if its been so long, forced to reboot the device and try again.
To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.
This may not work either. The backup may be damaged and you will need to remove and start over. However, its easy starting point and it will not hurt anything. If the backup will not end, he has nothing to lose.
-
Original title: slow down the computer
Hello world
I am running a Win7 on an hp w1858 pavilion. My computer became very slow (startup takes a huge time and even my internet browser takes too long to load. I use Google Chrome btw)
I also have Norton Security Suite via Comcast which shows that my system is clean, so I don't really know what the problem is. I would be grateful :) all tips thank you
Yes svchost.exe is eating all your cpu about
Cause the most common was that the windows update system stuck
Please go to start and Panel and Windows updates
On the top left click on change settings update.
Switch to never look for updates,
After the above, restart your machine.
After reboot see if these updates are installed if not install it.
KB3161664 main download page
https://TechNet.Microsoft.com/library/security/MS16-073
Win 7 32 bit
https://www.Microsoft.com/en-US/Download/details.aspx?ID=52823
Win 7 64 bit
https://www.Microsoft.com/en-US/Download/details.aspx?ID=52794
Same deal with it if it is not already installed
Main download page,
https://support.Microsoft.com/en-us/KB/3161608
Win-7 32-bit
https://www.Microsoft.com/en-US/Download/details.aspx?ID=52976
Win-7 64-bit
https://www.Microsoft.com/en-US/Download/details.aspx?ID=52974
Once the two of them are installed,
Change your settings to update them and manually check the updates, if this is not after the passage of the parameters and save the changes.
-
I am a new user of Iphone, I must he keep plugging my Iphone to the computer during the update download process? especially the download will take too long because it is more than 2 GB and my internet speed is not fast, I can unplug my Iphone until the full download?
Without doubt, but why not just make the day downloading overnight?
Maybe you are looking for
-
Photosmart HP 6520: HP Photosmart 6520 - error message when you try to use the apps
I can't access is more apps on my Photosmart HP 6520. I get the error message "error connection server - 1". I don't know if this problem just since I recently changed from a Windows PC on a Mac. I very rarely use the apps, so I don't know when it s
-
To replace a 3G21WB of the 790s
Hi after a bad storm my old 3G21WB with external antenna is dead. After a lot of frustrating calls to Telstra they sent me a replacement, a Netgear Aircard 790s. My old modem was connected to the PC via LAN, I do not have a free WiFi connection Jack.
-
I have a HP mini 110-3130 and locked the touchpad.
I have a HP mini 110-3130 and locked the touchpad. A small icon with a line through it. Once this icon fades the touchpad mouse stops working. Suggestions for addressing anomaly welcomed. There is no light or switch around the touchpad unlike some
-
Remove the icon grid Accuweather
Title: Accuweather original icon to remove accuweather screen icon
-
Size of the scaling and the type of icon/UI in Photoshop CC2015
There were several issues raised here in the past about the newish interface feature user scaling from 100% to 200%. I guess that the 200% was introduced to meet the new monitors high resolution (3840 x 2160), and I suppose if you set to 200% on a us