transparent filter problem

Similar Questions

• Google + (g +) transparent box problem

  Whenever you browse Google + (G +), a transparent box appears on the left. Someone knows how to fix this?

  Screenshot: http://uppix.net/ePIQX1.png

  All comments are welcome!

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• Brightness & yelow filter problems

  Hello!

  My problem is that I can not increase the brightness in the games.
  I use the nwidia Control Panel to increase the brightness, my office is almost white, but nothing happens in the games...
  Everything was OK under XP (so I change the brightness of the Panel, it also changes in the games)

  I also had a problem with the Windows Photo Viewer, all the photos as under yelow filter... and some gatget are yelow too... and menu of Rockstar Games Social Club is ander yelow filter too...

  Quite different is OK.

  Thank you

  Hi raf73,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to the material and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.microsoft.com/Forums/en/category/w7itpro?ITPID=sprblog.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Keys/keyboard filter problem?

  turned on the filter then it off key keyboard still does not work. also, has a restored system and KB has not yet responded. i a hp wireless kb and never had a problem w / until I have turned on accidntally filtr keys. have 2 use the keyboard to the screen w/mouse

  http://welcome.HP.com/country/us/en/support_task.html

  Try the uninstall/reinstall keyboard Drivers/software.

  You can find the HP drivers/software at the link above

  See you soon.

  Mick Murphy - Microsoft partner

• Filter problem of keyboard dv7-1170US trying to upgrade to Windows 7

  

  I have a laptop DV7-1170us with Windows Vista Edition Home Premium and try to upgrade to Windows7 but I have a problem with the update of the keyboard filter. Where can I download an updated driver?

  Thanks in advance

  Ric

  You can download the filter of keyboard also called quick launch in the following hyperlink:

  FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45058.exe

• Adobe Photoshop Camera Raw Filter problem

  I get the same weird problem whenever I try to take a .jpg image and apply the Camera Raw filter on it. This is what it looks like:

  

  I uninstalled and reinstalled in a first time, and then I gave my laptop image and nothing, still the same error. I also have a desktop computer with Adobe Photoshop and I tried it and it worked. But, why is it not this work on my laptop? Its the same exact version of Photoshop with all the updates.

  That's what it should look like:

  

  Try

  Win: Edit > Preferences > Performance

  Mac: Photoshop > Preferences > performance

  Deselect use Graphics Processor.

  Quit and restart Photoshop application.

  More information: Photoshop troubleshoot graphics hardware (GPU) and video card problems

• FILTER PROBLEMA "EFFETTI LUCE.

  Ciao a tutti ragazzi
  Spero qualcuno come to mi in aiuto pole really non so più che inventarmi possa. da some giorno ormai ho no problema con filter it "effetti luce", ossia quando che lo provo ad attempt non mi fa requested the classica where by change i parametri della luce del mouse my it cursore semplice. quindi non posso in nessun modo change grandezza o posizione della luce.
  qualcuno mi aiuti a favore

  I hope someone can help me because I don't really know any more than the inventor. Since a few days I have a problem with the filter "lighting effects", which means that when I try to apply do me not see the ellipse classic to change the settings of the light, but the mouse cursor. so I can in no way change size or position of the light.

  someone help me please

  What happens if you check view > Show > all.

• Transparent object problem

  Hi all

  I use illustrator CC

  Try to put a vector model on top a PSD (it's just a model)

  If I fill the vector with white model, it does not appear on the front at all (first image)

  If I fill it with a color, it turns a darker value when trying to arrange on top. (second image)

  

  

  I checked:

  The opacity is 100%

  the appearance is normal

  Compound path or not, same problem

  It is not applied clipping mask

  all other vectors that I use work very well and I checked everything I know ;(

  Is this enough information to get help?

  Thank you!!

  Try also to separate it and recording all the transparency settings that you ungroup multiple times if necessary to return to a collection of distinct objects.

• Security filter problem

  Hello

  I am facing a problem with the security filter for a single user. We are on the edition of Fusion Hyperion Version 11.1.2.1.

  We had a user created in the SSP with ID: TESTUSER and added in the group. Initially for this user was working fine. Subsequently, we have removed this user of shared services like us is needed more than that.

  According to the new requirements that we are supposed to create a user with the same username, so we created new new user "TESTUSER" and added in the same group of users, then we refreshed the Planning Application security by "Administration-> Application-> Refresh Database-> security filters '." " Refreshing security created filters to filter for above the user and we checked this consol EAS.

  However, when connect us to the Application via Smart View we get the error below.

  *****************

  Could not open the cube View.Essbase error (1054060): Essbase failed to select

  Application APP1, because the TESTUSER@Native directory is not\

  completely updated in service planning.

  *****************

  Could you please advice how we can solve this problem.

  Try to remove user security file EAS using MAXL and try again to create security filters.

• ID CS5.5 Mac - transparency printing problems custom size 13 x 21

  I try to print a screen printing positive transparency. The document is 13 x 21. I have a roll of 13 extended transparency which I cut a 21 "piece. I print on an EPSON 1400.

  I can not get the output to this szie file. It cuts the image within 8.5 x 11 limit each time.

  I have:

  -set a custom size in the print dialog box

  -Click on Page Setup in the print dialog box and set the custom size here, ignoring the warning to the subject it is not not printing ID dialog box

  -l' Preview in the dialog box will look perfectly oriented to the right size in the small tile

  -J' have tried everything I can think of to try to get in sync and correct output formats

  -I went to the PDF to try, fail again

  Is there someone who can help with some step by step to a process that works?

  Adobe ID CS5.5, EPSON Stylus Photo 1400, Mac Lion 10.7.5

  Only, I can't understand how this could be so difficult and little intuitive. Any idea would be freaking wonderul.

  Wow! Sudden incidental finding on this incredibly frustrating issue.

  I had found information that the EPSON 1400 should be able to print 44 "long output by default. I was looking specifically for one to find people who had printed large and panoramic images and came across a photography website of the United Kingdom where a person mentioned that he had written a software that would allow this printer print beyond 44 ". That sounded a lot.

  BUT, the last post on the thread of a guy says how he was able to print up to 44 '' for an EPSON 1400 with ease. The solution, said, was that the WIDTH of the print in the page layout area must be LOWER at 13 ". Why? No explanation.

  So I reset my size custom at 12.5x21 inches and BAM! First attempt to InDesign printed successfully. I can work with the margin.

  Anyway, in the case that everyone runs into this problem, it works. Here is a link to the post of 2009 that mentions this as info about printing more than 44 ".

  This one is solved.

• Transparent gradient problem - Illustrator/InDesign

  Hello

  I have a file of eps Illustrator who has a shadow using a black to transparent gradient on it, but when I bring it in InDesign the shadow has a white background. I need to place it over an image partially, otherwise it would not be a problem. Is there some sort of option of transparency I'm supposed to have selected?

  Thank you very much if anyone can help

  You can try to show import options when you place the file and check the background Transparent, but if this is not successful, you must resave the graphic as PDF or .ai.

• Library filter problem

  In the past, I used the text and attribute filters at the same time to perform a search on a keyword and starry images. But tonight, I open the text filter, but when I click on the attribute, it replaces the filter text instead of opening beside him. I guess I've hit inadvertently a shortcut key change this function. I searched the forum and looked through the view menu, but can't find how to solve this problem. Any thoughts?

  Try to hold down the Ctrl (probably the key command on Mac) key when you click on the second.

  HAL

• Interactive report filter problem

  Hello
  
  Today I met a problem with an interactive report. When the report first, load no problem. If a filter is added, an error is returned. The error is actually produced by a routine of affirmation that triggers and exception if a NULL value is passed. Here is a modified and simplified the application version:
  

  SELECT id,
     name,
     dept,
     emp.year_of_emp(hire_date) AS years_of_employment
  FROM emp_table
  WHERE id IN (
     SELECT c001
     FROM apex_collections
     WHERE collection_name = 'EMPS_UNDER_MANAGER'
  );

  Once again, when the report first no loading, no problem. When the Manager applies, say a filter on dept, an error is raised by the emp.year_of_emp function because a NULL value was passed.
  
  I know that all the EMOS with an id of PGE in the collection have a hire_date so I don't think that I should add another condition in where clause to filter those (even if it's the work at this stage). Anyone has any ideas as to what could be the cause?
  
  Kind regards
  Dan
  
  http://danielmcghan.us
  http://sourceforge.NET/projects/tapigen
  http://sourceforge.NET/projects/plrecur

  Hello Dan,.

  Most points on the road ;-)

  Select / * + SORTED * / seems to do the trick... (I've updated your sample app and it works)

  Greetings,
  Roel
  http://roelhartman.blogspot.com/
  You can reward this response in marking it as useful or Correct ;-)

• Butterworth on Labview 8.6 FPGA filter problem

  Hello

  I was testing the filters of reconfigurable low-pass butterworth on FPGA found from the Finder of example (using Reconfigurable Butterworth filter - R - series.lvproj). This VI generates a sinusoidal signal and passes through a filter of Butterworth. When I put the filter low pass frequency to a low value (~ 2 Hz) and generate a sinusoidal signal of 0.5 Hz filttered out is not so much more (see figure). The filter is 2nd order, so this is a characteristic of the filter? And what do I do if I want a taste of high-frequency and use a low cutoff value?

  v: * {behavior:url(#default#VML) ;}
  O'Bryan: * {behavior:url(#default#VML) ;}
  w\: * {behavior:url(#default#VML) ;}
  . Shape {behavior:url(#default#VML) ;}

  Normal
  0

  fake
  fake
  fake

  MicrosoftInternetExplorer4

  / * Style definitions * /.
  p.MsoNormal, li. MsoNormal, div. MsoNormal
  {"mso-style-parent:" ";"}
  margin: 0 cm;
  margin-bottom: .0001pt;
  MSO-pagination: widow-orphan;
  font-size: 12.0pt;
  do-family: "Times New Roman";
  mso-fareast-font-family: 'Times New Roman' ;}
  @page Section1
  {size: 612.0pt 792.0pt;}
  margin: 72.0pt 89.85pt 72.0pt 89.85pt.
  MSO-header-margin: 35.45pt.
  MSO-footer-margin: 35.45pt.
  MSO-paper-source: 0 ;}
  div. 1
  {page: Section1 ;}}
  --> I'm using Labview FPGA Module version 8.6 and PCI-7833R-map. LabVIEW 8.5, I remember that Butterworth filters, for above and below 2 kHz cutoff frequencies are actually different screws but on LV 8.6 they seem the same.

  / * Style definitions * /.
  table. MsoNormalTable
  {mso-style-name: "Table Normal";}
  MSO-knew-rowband-size: 0;
  MSO-knew-colband-size: 0;
  MSO-style - noshow:yes;
  "mso-style-parent:" ";" "
  MSO-padding-alt: 0 cm 0 cm 5.4pt 5.4pt;
  MSO-para-margin: 0 cm;
  MSO-para-margin-bottom: .0001pt;
  MSO-pagination: widow-orphan;
  do-size: 10.0pt;
  do-family: "Times New Roman";
  MSO-ansi-language: #0400;
  mso-fareast-language: #0400;
  mso-bidi-language: #0400 ;}

  -Heikki

  Hi Heikki,

  The reconfigurable version (IE, with 'See the terminal configuration' checked) does not support the implementation of low-frequency modified. This is because we cannot change the filter architectures running. The nonreconfigurable version, however, must use the same implementation updated him you saw in LabVIEW 8.5 for the low cutoff frequencies, defined here as the frequencies less de.01 * sampling frequency.

  Your example of 100 kech sampling rate. / s and 2 Hz cut-off is pretty extreme, even for the implementation changed. The usual technique for situations like this must be a smoothing downsampling at a rate that is better suited to the break you need. Rational resampling of the FPGA Math palette & analysis is designed for this purpose.

  Kind regards

  Jim

• Filter problem Smartphones blackBerry MemoPad

  I recently bought a Verizon 8830 WE.  I have to many memos entered MemoPad I synchronize with Microsoft Outlook Notes.  When I view the memos in Outlook, I am able to categorize, however when I try to classify them on the 8830 by typing something on find it: line or or by selecting a category under the filter, I get * no. memos *, even if there is in fact notes of service assigned to the selected category.  Since I have many notes from service, he's difficult to scroll through each one to find what I'm looking for.  How can I get filtering to work on the device?

  Thank you

  A

  It has never worked, or it never worked?

  Have you tried to reset the device by removing the battery for a minute?