GPS on Stream 8 5801WT?

Similar Questions

• Wrong time current GPS receiver while generating signal GPS with GNSS Toolkit

  Hi all!

  I have a problem with the generation of GPS signal. As he has shown in the current schedule to the receiver time differs from time current GPS week on niGPS Live Streaming Generation.vi

  Time initial GPS set to 0, so I expect the current, while production should start at 0:00 December 6, 2015. But the receiver poster 23:59:40 12.06.2015 start

  Could someone explain to me what can be wrong?

  That's what I was talking about yesterday.

  Time of receiver watch hour UTC

  Is time on GPS Live Streaming VI GPS.

  GPS Time - time UTC = 16 seconds (Leap).

• HP Jet 7 - GPS Bluetooth device?

  I have an old Holux M-1000 I try pair-to-use with my 7 stream.

  Pairs of unit very well, but then disconnects.  If I understand correctly, this is a 'new' of Windows 8 x / 10 x.  And until some programs wakes location services, you cannot connect.  Anyway, there is a blog entry to this on the subject:

  http://www.nicknoltewx.com/blog/2013/03/15/GPS-devices-in-Windows-8-apps/

  and a 'pilot' of sorts found (linked by above blog):

  http://www.turboirc.com/gps7/

  Allegedly, he makes the GPS device available through some internal changes.  And it is supposed to work with Win 8.1.

  The blog is one notes, however, that this may not work with devices Atom - whose stream 7A.

  Someone has any ideas here what to do - or other success?  It would be nice to resurrect this older with steam 7 GPS device, as the S7 has no internal GPS.

  Well - I guess that 57th time was the charm.  I played with him for at least 3 hours yesterday trying to get it to connect.

  Tried this morning - no luck.

  Now, sit down, AFTER this announcement (don't you know), and now he pairs and connects and works just peachy.  Use it with 2 card programs and it made me 'identified '.

• Windows 7 USB GPS acknowledged as a mouse series in Windows 7

  * original title - Windows 7 + GPS USB becomes new serial bad = mouse *.

  I know this has been asked several times here and a solution must appear, but he's been a while since the last time it was published, I thought I'd see if progress has been made.

  Problem: Plug a USB GPS or a GPS serial number connected through a serial number-> USB adapter causes Windows 7 bad recognize the device as a mouse series, and given that the data stream is rapid, mounse pointer starts jumping all over the screen.  In XP, disconnect the GPS temporarily left behind the mouse series in Device Manager, and turn it off it would then the system be reused.

  Unfortunately, in Windows 7 when GPS is off the system immediately removes the device from the Device Manager.

  In addition, he had released Microsoft tools to combat this problem on the front end server have not been released for Windows 7.

  So we have the choice, continue to organize the deployment of the laptop, or return to the deployment of them with XP.  None of these options is ideal.

  Anyone have any ideas?

  Salvation of the Zeta project,

  I suggest you try the steps and check them off below if it helps:

  Important: The instructions below contain steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. To display the information most article in Microsoft Windows Help article: back up the registry:http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  i. Click Start

  II. in the search box, type regedit

  Opens the register III Editor Windows.

  IV. navigate to the location: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\sermouse

  v. on the side right you will findStart

  VI. change the value in the key: 00000004

  If you do not find the Start button and then follow the steps below:

  i. right click on empty space

  II. Select the new option

  III. click on the dword 32-bit value

  IV. Renommez_ to start

  v. a right click on the key and select and change

  VI. the power of the value: 00000004

  VII. restart the computer

  Now connect the GPS via USB and USB adapter series and check the results.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• is more able to stream video from some sites after the upgrade to Safari 10

  

  After the upgrade to 10 Safari, I can no longer stream from a certain website. Instead of playing the video stream, I'm prompted to save "player.swf" as shown above.  This problem occurs on el Capitan, and it happens on the Sierra, and it all started when I updated Safari 9.x to 10.0

  Open Safari preferences / Security tab and check the box allow Plug-ins.

  Very soon of Flash player and the plugin will be obsolete and this web page needs to change its code to HTML5.

• Suddenly sync with my iphone, my ipad mini photo stream stop 6

  Please I need help!

  My cry of my mini ipad picture suddenly stopped syncing with my iphone 6. It started already before the 10 updated both ios.

  I tried all the tips I found here and at google and it still does not work.

  Thank you very much.

  vively wrote:

  Please I need help!

  My cry of my mini ipad picture suddenly stopped syncing with my iphone 6. It started already before the 10 updated both ios.

  I tried all the tips I found here and at google and it still does not work.

  Thank you very much.

  Since you don't specify what you tried actually, here, you can:

  Get help using my photo stream - Apple Support

  My photo FAQ - Apple Support stream

• Open photo of Photos in the Preview app? Need info GPS and maps!

  Hello!

  I write trip review and to see where my photo was taken (in the maps application), and what is digital gps coordinates for each image.

  Search on google - go, I got that via this pic of opening in 'Preview' app.

  But - I have all my pic in Photos app (automatically imported from my iphone to macbook pro Mac OS sierra).

  so, I can export all the photos, I need, in a specific folder and then, from there, open it in the finder and get my info, of course - but looks silly, I think.

  as I already have this pich in Photos - photo can I somehow open directly from Photos Preview app?

  or obtain the gps position open, where this picture is taken in cards programm (not this small window, which is in the Photos, but wide, Maps application) / and obtain the coordinates of the gps directly via the Photos app?

  Thanks in advance.

  Use the media browser in preview - in the open window on the left down - media = == > photos == > Photos

  or even more appropriate is to buy external editors for extension of Photos in the App store ($0.99) and you can view the pictures in preview when using the hotos

  Photo editing Photos for Mac Extensions

  LN

• Solution to stop and bufferin game of Air streaming on Apple TV 3rd gen. ?

  Even when im in the same room of 12 feet out. It's really frustrating.

  Streaming tube you 3rd generation is very frustrating on Air play on Apple TV. I have a Mac Book Pro with Mac OS El Capitan.

  any help will be appreciated.  Im trying using Roku, it might work better.

  Hi wilmernyc,

  I see your post that your antenna streaming is lagging and becomes interrupted when trying to stream content from your MacBook Pro to your Apple TV. I want to help you get a solution for this!

  Please follow the steps listed here to solve this problem:
  

  If your content is interrupted or your network is lagging

  If you have a weak Wi - Fi signal or interference from a device nearby, like a microwave or baby monitor, follow these steps:

  1. Make sure that you use the recommended settings of your Wi-Fi router.
  2. Move or disable other devices that may cause interference.
  3. If possible, connect your Apple TV directly to your router with an Ethernet cable instead of using Wi - Fi.

  Your AirPlay connection may if interrupt prematurely when you lock your device, put it to sleep, or switch to a different application.

  Get help with AirPlay and AirPlay Mirroring on your iPhone, iPad or iPod touch - Apple Support

  Although the article does not directly apply to OS X, I think that these steps will be useful for you.

  Take care!

• My 7 GPS iPhone does not work in any GPS application

  I got my new iPhone 7 last week. Yeaterday was the first day I tried to use Waze to give me directions to an address, but he was constantly telling me that she is looking for the GPS signal.

  I first thought that it is a problem with Waze so I reinstalled, displayed/hidden it's approval of location on and outside Services, but nothing helped. I restarted the phone, even restored (Yes. I have about 2 hours waiting to do).

  But that has not worked so I thought that perhaps Waze is, after all the blame. So I tried also maps from Apple and Google Maps. NONE of them could get my location. And while my position was 'fixed' at Waze, showing me home - Yes, Waze is still showing me the House status even if I am in another city - maps of Apple and Google Maps shows my post to jump around randomly on the map.

  I tried to reset my edge settings, my privacy settings, each of them. Nothing helps.

  Is there perhaps someone who has a solution, or should I go through the pain and try to replace a week later I got it?

  Hi zeusent,

  Congratulations on your new iPhone 7! I understand that you have some problems with it to find your location to several applications. I know it's important to be able to find your way when in a new area, so I'm happy to help you.

  Before you begin, make sure that you have a current backup of your data:

  The backup of your iPhone, iPad and iPod touch - Apple Support

  You've already got a good start with the troubleshooting you have been through. Since you still have questions, it can help to determine whether it is material or not by restoring the iPhone as new. This article has the steps to do:

  How to clear your iOS device and then set up as a new device or restore from backups - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• GPS number race Nike Run Club with the Apple Watch 2 series

  I have my Apple Watch 2 configuration with the Nike Run Club app.  Repeatedly, I tried to run without my iPhone (6 current execution 10.0.2) and for some reason that GPS doesn't seem to work. While I open a session is running, pace/time is completely off and it isn't GPS data capture because cards do not appear in the app once I connect and send the run. Also, I assume that the GPS does not work because the pace is so far off the coast. It seems to me that it is logging tracks using the accelerometer, which has not yet been resolved as I want to be able to connect the tracks using GPS.  I need help. Has anyone else had the same help as he attempted to use this app? I bought the watch to replace an old Strip, Nike +, in the hope that I could run without the phone, but it has been an uphill battle implemented.  The Nike Run Club app not yet been updated in order to make full use of GPS data from the Apple Watch?

  Hello

  You may find it useful to consult the support resources of Nike and/or contact Nike for assistance with the help of their application:

  • Contact Nike (support is available by phone and via social media):
    • https://support-en-us.nikeplus.com/app/contact/l/4/t/4462/
  • Nike + running Club to support:
    • http://nikeplus.com/support/

  More information:

  https://iTunes.Apple.com/us/app/Nike+-run-Club/id387771637?Mt=8

• My iPhone GPS to track a car trip

  My iPhone GPS to track a car trip? What app (s) do I need?

  Do you mean you want to keep a record of the trip? As on a map? Or you just want to follow something like mileage?

  I use a unit called 'Automatic' that plugs into the ODB port on my car. Depending on what you want to do, it may be an interesting option.

  https://www.automatic.com/

  The TRIPS agreement is indicated on a map. Some travel details can be exported to a worksheet.

• GPS apps in the background

  I have an iPhone 6 s upgraded to iOS 10 the day it came out last week and I noticed that applications using GPS are failing in the background when several applications are in use. I ran to the Waze to check the traffic and Google Maps at the same time to check something on Friday and has noticed that if she was in the background would tend to turn off after a few moments. When I turn back, she will have to acquire the road again. I also have a Fitbit load HR, which uses the GPS on the phone via bluetooth to create a map of my route. I have it worked out with my usual Runkeeper app (which normally works perfectly) and noticed that Runkeeper would be closed after a mile or more. When I went to him to my podcast app after my race, Runkeeper would start up and missed the last two miles of my race. In addition, the road saved by Fitbit seemed jumped all over the place. I know that it is not unusual for GPS from blip, especially when moving through areas with weak signal or cell mutation or all through the streets of the city with tall buildings, but it seems that the problems have become more coherent. I have not tried to run with a single application to see if I have the same problem, but will try tomorrow. I used only a single app for navigation (Waze) yesterday evening and he seemed also to close after it is placed in the background for a while. Has anyone else seen anything like this?

  Hello alexhoward,

  Thank you for using communities of Apple Support. It is my understanding GPS apps do not work in the background, after the update to iOS 10. I use GPS every time I travel. I know that it can be crucial for applications GPS running in the background. I'm happy to help you

  I recommend first restart your iPhone. This can solve many unexpected behaviours. Follow the steps below.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Restart your iPhone, iPad or iPod touch

  If the problem persists, reset your location service. This resets all settings at default location. Apps will be stop using your location until you grant them permission again. Go to settings > general > reset > reset the card and privacy. Here is some additional information on location Services.
  On privacy and location in iOS Services 8 and later versions

  See you soon!

• Error of GPS in the iphone 6 more after upgrading to ios 10

  After updating my iphone 6 more iOS 10, the gps signal was missing, when I try to disable and enable the iphone you location is bloked, before the update that the gps is working properly. Can correct this feature in relese next IOS? Thank you very much

  Hi Chicojander,

  I understand that you have difficulties using your GPS on your iPhone. I know it's important to be able to easily know where you are located, so I'm happy to help you.

  Looks like you've already got a good start on your troubleshooting of switching location Services. On top of that, look at the troubleshooting we offer here:

  Get help with maps - Apple Support
  

  If you do not find your current location on your iPhone, iPad or iPod touch

  1. Go to settings > privacy > location Services and to make, of course, this location Services and maps is set while it helps.
  2. Make sure that you set the date, time and timezone correctly on your device. Go to settings > general > Date & time. If possible, use the value automatically.
  3. Restart your device.
  4. Make sure that the cellular data or Wi - Fi turned on and that you have a connection active.
  5. Try another location or switch to another Wi - Fi network.

  Location-based services using GPS, Bluetooth, crowd-sourced hotspot Wi - Fi and the cell towers to determine your position. Learn more about The location Services on your iOS device.

  Thank you for using communities Support from Apple. See you soon!

• Series 2 GPS mapping works is not without an iPhone?

  I tried run/walk with the following applications without my iPhone, but they don't display any map of my route in activity CA. seems like it should always be attached to the phone to follow?

  • RunKeeper
  • Apple training app (run/walk in the open air)
  • Runtastic

  Y at - it a setting that I need to install or configure on the watch or the phone?

  I sometimes test by putting my phone in airplane so my watch mode is on its own, but it still doesn't seem to work.

  At this stage there is no 3rd party apps that have access to the mapping feature. Only the application of the workout gives you a map.

  That said, when you did the run/walk outdoors with your phone in airplane mode did you your watch out of airplane mode? When you put the phone in airplane mode, it should automatically put the watch in airplane mode as well. I ask because that how to turn off the GPS as well in airplane mode. And of course if the GPS is off you would not get the plan...

• Film vs my photo stream

  I tried to move photos from my iPhone to my iMac.  I connected my iPhone to my iMac.  613 photos to import.  Photos of 613 were in my camera.  I have 974 photos in my iPhone photo stream.  What is the difference between the film and my photo stream.  We should I import to save the photos from my iPhone to my iMac and then transfer them to an external hard drive.  Thanks for your comments and help.

  Camera Roll is home to these photos taken on your iPhone.  Those are the ones that must be imported.

  Photo stream is similar to iCloud photo library and is home to the photos that are already able to share.  They are not necessarily taken on the device that houses.