GR 11, 2 dump schema in the schema 10g

Similar Questions

• Re: What is the different between the NB550D-109 and the NB550D - 10G?

  Hello guys. I need help on the NB550D. What is the different between the NB550D-109 and the NB550D - 10G? Is just the color?

  I checked the specifications and I find no difference. Both models have the same part number, so both belong to portable computers with the same hardware configuration. Thus, the difference can be color only.

  What I see is the 109 NB550D offered in more countries than NB550D - 10G.

• How to get the MAC address of the additional 10G NIC with command-line ILO

  How to get the MAC address of the additional 10G NIC with ILO command line?

  Thank you.

  Hi Bruce,.

  Out of what I can find on this network card is not available for the Mac without an operating system. I recommend get/burning a live CD/DVD of Ubuntu/Linux and run an Ifconfig in there.

  Hope this helps you.

• Is Guide to the forms/4GL developers of the developer 10g obsolete?

  Hello
  
  Is Guide to the forms/4GL developers of the developer 10g obsolete?
  Because there are examples such as
  To the custom help ADF Page Lifecycle to call a Backing Bean onPageLoad
  Method
  
  I can't find in the 11g docs
  
  Thank you.
  
  Published by: juancarlosreyesp on October 8, 2012 10:41

  Hello
  many things Yes.
  http://docs.Oracle.com/CD/E23943_01/Web.1111/b31973/TOC.htm
  http://docs.Oracle.com/CD/E23943_01/Web.1111/b31974/TOC.htm

• To access the Forms 10g network public ip static via ACE

  Hello
  
  Greetings,
  
  I have not asked this question in the forum server application, but so far no response. Maybe someone here can help me or give a hint how to configure the application 10g R2 on static ip public server.
  
  We have 3 network card in the new server. OS windows 2003R2.
  
  1 LAN network for a local connection
  2 STATIC IP for access to the public
  3 loop back adapter current.
  
  I searched for any document on this subject but without success. I followed the oracle application server installation guide 10g Release 2 (10.1.2) successfully, but it's only in intranet, because I installed in network adapter 2 but now different situation that the new server that is has 3 network adapter.
  
  I don't know how to set up in the public static ip address...
  
  Now, I want to install AS for the Internet. But I do not know what exactly the steps and I don't want to install without proper procedure.
  
  Have I used the static ip address instead of the local dchp? I have to join to the domain? What I'll put in the/windows/system32/drivers/others/host?
  
  Please can someone help me?
  
  Thank you
  
  Charles.

  Charles wrote:
  I'm very sorry, I don't know many networking as im only low level form developer.

  Do not be sorry, we all once started as a low level developers with little knowledge ;)

  And we do not have network admin who can help me now

  Is it not the one who is responsible for the IT infrastructure? Don't get me wrong, there is really no offence meant everything leaving the correct configuration of a server exposed to the internet up to a developer? I mean we are trained to write correct code, not for servers or the tires of the company car, right? Do facilities to test for the OK intranet systems, but correctly configure a host exposed to the internet? As it's windows you barricade better it as well as possible, because it is most certainly a main entrance for attacks. Once your host is compromised, there is nothing that can stop intruders possible enter in the LAN, and data across the enterprise are at stake. I do not want to forget the situation of insecurity, but if something happens and it gets out that you had an attack via the server you set up I don't want to be you...

  In any case, just a few tips as how and why would exceed this thread:
  For the Server Application (software, not the entire configuration), there is no difference if the host on which it will run is connected to a network with 5, 5000 or 50000000 hosts; If you want to see it as simple as possible, he says just the http requests. The application server software does not care how this request happened to her. So for the installation of IAS itself, it does not matter, just install it as an application server for the intranet.

  First get rid of the loopback adapter ruined; It is only used if your machine does not have network access at all. So, you have 2 NICs on the left, and I'm assuming that one is the local network, and the other is the internet connection?
  If anything is "between" your server and the great cloud of the internet, you can easily try if you are public available once the internet connection is established: just type

  ipconfig
  

  and take a look at the IP address of your internet adapter. Now launch your browser, type

  http:///forms/frmservlet
  

  You should see the test request forms. If you already have a domain name registered to your public IP address, you can even use this domain instead of the IP address. If you don't have a domain name, you can register a domain free http://www.dyndns.com/, put in place the customer on your host and you are available under this IP address. This would also work if you have a dynamic IP like dyndns client sends the IP to the service periodically so that the domain name is updated if IP address changes (I use dyndns to my private Web server connected to the internet via a connection to the internet dial-up for years, works like a charm). But I wouldn't use it as a production environment.

  The config set well enough depends on your infrastructure; If you have a router or a firewall, you must configure these things too (port forewarding etc.), surely there's therefore no step by step guide that applies to everyone. Just my personal opinion, but it will be a pretty cold day in hell before I expose a windows server to the internet as a "first line of attack", and I hope that you're not supposed to do. As your LAN certainly is connected through a router to the internet your server can be also accessible through this router. If this is the case, you need to configure your router for queries foreword to the port that your IAS is running on your host (just look for portforewarding ). But if you ask me there's another damn cold day in hell before I let the developers about this router if it were my company (didn't access the router config in my company also and rightly so).

  see you soon

• Install the discoverer 10g with EBS R12

  Hello
  
  I want to install the discoverer 10g with EBS R12,
  Please send me any document and the steps required to install and configure?
  
  Thank you
  Kouadio

  PL, perform in MOS Doc 373634.1 (using discoverer 10.1.2 with Oracle E-Business Suite Release 12)

  HTH
  Srini

• How to repeat the same line more than once in the report 10g

  How to repeat the same line more than once in the report 10g
  
  If I print the barcode more than once
  in the report;
  
  Published by: user11106555 on May 9, 2009 05:50

  OK, thought it was just a recording, then try:

  SELECT COL
    FROM TABLE,
         (SELECT 1
            FROM DUAL
           CONNECT BY ROWNUM
  

• Cannot open the dbca 10g on RHEL5

  Hi guys,.
  
  I use the oracle 10g on RHEL5platform database. I'm unable to open 10g dbca.
  
  I don't know exactly the problem, I put some settings such as
  
  DISPLAY = < computer name >: 0.0; Export DISPLAY AS ROOT
  
  and xhost + < computer name > as root and user oracle. According to the docs of oracle.
  
  When I try to start dbca in $oracle_home/bin it gives eror "Exception in thread"main"
  
  What else should I set?
  
  Thanks and greetings
  VD
  
  Published by: vikrant dixit on December 16, 2008 22:45
  
  Published by: vikrant dixit on December 16, 2008 22:58

  Log in as ROOT
  Set xhost +.
  Log in as user oRacle
  Export DISPLAY
  then try

• update the primary database with the old system dump export received the YVERT error

  Here is the error message:
  ORA-31684: SYNONYM object type: 'SYSTEM '. "" SYSFILES "already exists
  ORA-31684: SYNONYM object type: 'SYSTEM '. "" TAB "already exists
  ORA-31684: SYNONYM object type: 'SYSTEM '. "' TABQUOTAS ' already exists
  ORA-31684: SYNONYM object type: 'SYSTEM '. "" PRODUCT_USER_PROFILE ' already exists
  DATABASE_EXPORT/SCHEMA/TYPE/TYPE_SPEC processing object type
  ORA-31684: type of the object TYPE: "SYSTEM". "" REPCAT$ _OBJECT_NULL_VECTOR ' already exists
  Treatment of type of object DATABASE_EXPORT, SYSTEM_PROCOBJACT, PRE_SYSTEM_ACTIONS, PROCACT_SYSTEM
  Cannot set a bigger than the current SNA SNA. If a configuration Capture stream was then imported the application that processes the captured messages must be deleted and re-created. See My Oracle Support 1380295.1.
  Treatment of type of object DATABASE_EXPORT/SYSTEM_PROCOBJACT/PROCOBJ
  ORA-39083: Type THAT PROCOBJ cannot be created with the object error:
  ORA-29357: SYSTEM_PLAN object already exists
  Because sql is:
  BEGIN
  dbms_resource_manager.create_plan ('SYSTEM_PLAN', 'Plan focus on system sessions', 'FOCUS', 'ACTIVE_SESS_POOL_ABSOLUTE', 'PARALLEL_DEGREE_LIMIT_ABSOLUTE', 'FIFO_TIMEOUT'); COMMIT; END;
  
  
  NEW RAC system is redhat linux 5, db version 1120301.
  old system is a database on aix, version is 11.2.01
  
  by export file:
  Full = directory = data_pump_dir dumpfile=exp_full_%U.dmp logfile = exp_full.log filesize = 11000 m FLASHBACK_TIME = systimestamp
  
  import file is:
  
  Full directory = y = data_pump_dir dumpfile=exp_full_%U.dmp logfile = parallel imp_full.log = 8
  ~

  This seems to be what I tried to say a few hours back.

  I probably give up at this point and take a step back and rethink this.

  Anything worth doing worth do right.

  Really. Stop, think and plan.

  Stop waiting for someone to tell you what you want to hear.

  Best regards

  mseberg

• How to analyze a crash dump to determine the root cause of the dump?

  Hello, I have a desktop computer that breaks down frequently.  EventViewer showed that blue screens keep on occurring.  We suspect it is a new software that has been installed and have a few dumps, but would appreciate any advice on playing the dumps to make sense.  Thank you
  \|/

  Hello

  BlueScreenView execution and it displays the information in a very readable format.
  is simple and fast. BlueScreenView is not as accurate for the specific CAUSE
  WinDBG however it brings a wealth of information - and it's still very
  simple to use,

  BlueScreenView - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  When you click on each top of the article Bug_Check the lower part displays the
  Names of files containing more information. Sometimes, the CAUSE is the real cause
  but more likely, it's what has been assigned (or pushed to the fault) by something
  on the other. Check commands/options menus, and right-click
  While in BlueScreenView.

  How read partial memory dump files that Windows creates for debugging
  http://support.Microsoft.com/kb/315263/en-us?p=1

  Check this thread for more information using BlueScreenView, MyEventViewer and
  other methods of troubleshooting BlueScreens - answers top 3 (+ 1 more). This
  Convenience store is for Windows 7, however, she also works for XP and Visa.
  the main differences are using RUN instead of start - search (for XP).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  ------------------------------------------------------------

  WinDBG is a more complete debugging tool.

  How to read the memory dump file that is created by Windows if an incident occurs
  http://support.Microsoft.com/kb/315263/en-us

  Using the Microsoft Windows Debugger (WinDbg)
  http://kipirvine.com/ASM/4th/debug/WinDbg/index.htm

  WinDbg
  http://en.Wikipedia.org/wiki/WinDbg

  Download and install the debugging tools for Windows (use the SDK)
  http://www.Microsoft.com/whdc/devtools/debugging/default.mspx

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• 0x000000F4 beginning physical memory dump, this is the error message I got when I perform the adaptation of data operation or run heavy programs, and when I play the music of his tempo becomes slower.

  Original title: 0x000000f4 beginning physical memory dump

  STOP: 0x000000f4 (0 x 00000003, 0x89cb3a18, 0x89cb3b8c, 0x805d29b4) beginning physical memory dump

  This is the error message I got when I perform the adaptation of data operation or run heavy programs, and when I play the music of his tempo becomes slower... What do I do? Help, please...

  Hello

  You did changes to the computer before this problem?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Delete or not; "System error Memory Dump Files" & "Debug dump files" in the Windows 7 disk cleanup program

  I am new to Windows 7, 64-bit OS and making the disk cleanup program. There are 2 unfamiliar topics with boxes to check what are the "Debug Dump Files" and "system error memory dump files.  I'm naïve as to what are these files and whether they contain all files that possibly should not be deleted.  Can anyone say and find out about what are the debug files and system error Memory Dump and if; Should I or not the check their boxes to get rid of all these files in particular type box?  Or could there be some Debug files & system error Memory Dump that might be of some importance and should not be deleted?

  Thank you for your time and any comments on this would be greatly appreciated.  Have a nice weekend.

  Tom R

  One good thing about Windows Disk Clean up is, only offer files delete them it is safe and will not harm your PC. Files of system errors and debugging dump files are created when there is an error in your system, and it creates a dump file that could be used for analyses. That say if you encounter blue screen error, dump file will create and if you find analysis you of cause of this problem. Whether or not you want to remove, you, some people will delete it only while others will keep the Explorer themselves later. But more importantly, it is wise to report them to Microsoft before deleting.

  To do this, open Control Panel and click under Maintenance contract and Action Center, click Check for solutions then it will collect all the information related to the errors and dump files and he could ask permission to send them and if you great permission, they will be sent. Once it was successful you can delete them.

  Sending the Microsoft dump files is a good idea, because there are teams who revisit and they try to find the cause and resolve it through Windows Update, or inform you about the possible solution in the center of the Action.

• How to analyse the core dump generated by the user application

  My user application developed for ESXi 5.5 occasionally generates signal SIGSEGV, causing in turn core dump generated.

  I used this command to enable the generation of core dump in the directory/var/core.

  / sbin/vsish EI configuration/userworld/global/coreDumpEnabled 1

  After dump generated, I tried using esxcfg-dumppart to extract the logs of information, according to this link http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1006796

  But it seems that this tool is intended only to analyze the kernel image.

  / var/core # esxcfg - dumppart - L appdump - zdump.000

  Error running command. Failed to retrieve the log. Cannot find a valid dump VMKernel file. Partition of discharge can be uninitialized.

  Is it possible to analyse the core dump generated by application "userland" in ESXi 5.

  Thank you

  Arun

  Hi arunkrish,

  OK, this tool (esxcfg-dumppart) is exclusively for the extraction of a file readable to vmkerneltext - zdumps.  The recommended method for the guest operating system dumps review is vmss2core which gives you the news crashdump desired in a format readable by the debugger for the OS in question asked.  As I understand it, the * zdump.000, * zdump.001, etc., are questions of trapping in the VM (i.e. rather than the GS) level.

  I think that only VMware support can read these basic gos/vmx dumps that you are trying to review (I hope I'm wrong).  However, you can try your luck opening them in a debugger pro such as IDA Pro (speculation).  They have a free trial version.

• Estimate of the size of the dump file with the export query parameter

  Hi all
  
  I would like to ask questions about EXPORT utiliy. Can I estimate the size of the dump for export with the parameter file "application"? You can find my syntax exp on below?
  
  exp scwq/sCwq201 parfile = scw.par
  
  contents of the scw.par file.
  
  FILE ='/ u01/EXPDUMP/SCW. DMP ".
  TABLES IS MIMO. WFTRA
  JOURNAL ='/ u01/EXPDUMP/SCW. JOURNAL"
  CONSTRAINTS = NO.
  STATISTICS = NONE
  QUERY = "WHERE (Eurie > 8132560 AND IN (SELECT FROM mimo.objectcfg WHERE oname sobject = 'TICKET')) OR (Eurie > 188872 AND IN (SELECT FROM mimo.objectcfg WHERE objectname sobject = 'WORDER')) '"
  
  In fact, I know that without query to export file parameter. But I could not find a solution to my question...
  
  
  B.R

  Hello
  From what I've seen when you do 'query =' is not taken into account at all when estimating the size of the dumpfile no matter if you use blocks or statistics methods. All I can suggest you do is get the estimated size and then work manually on what percentage of lines you will be back and then just do a simple calculation.

  Kind regards
  Harry

  http://dbaharrison.blogspot.com

• Export the dump file using the Scheduler

  HelloW everyone.
  
  It's Tic Tac Toe, I'm looking for help, I created a script to export dump files, but I had a problem
  When exports began because of the existing name his exporting is not the file I want is anyway
  to change the export name daily?
  
  Tic Tac Toe

  Check this box
  Add timestamp to filename exp
  http://www.idevelopment.info/data/Oracle/DBA_scripts/WINDOWS_Shell_Scripts/dpump_backup_online_full.bat

  -André