Similar Questions

• access the Forms 10g for other systems on the network

  1. I have improved my form 6i to 10 g NETWORK_SITE. I am able to display the form successfully by using the following http://pc938.stc.corp:8889/forms90/f90servlet on my system. But when I try to connect to the same address using other systems use the same address I get ORACLE APPLICATION SERVER INSTALLED successfully and after I click OK I get a blank screen. How DO I solve this problem... ??
  
  2. I have improved my form more EMPLOYEES to 10 g but when I compile it must be connected to the database while such mistakes say PAYMAST, TBL, TBK...

  Hello!

  You specify which forms fmx to load.
  for example: http://pc938.stc.corp:8889/forms90/f90servlet&form=c:\your_path\your_form.fmx

  best is to create a configuration entry in formsweb.cfg with the path of work and the fmx to load.

  Concerning

• Try to install adobe reader & I continue to get this message... Error 1606. Could access the location %APPDATA%\ network what do I do?

  Try to install adobe reader & I continue to get this message... Error 1606. Could access the location %APPDATA%\ network what do I do?

  Check the registry values listed in the present statutes are suitable:

  http://support.Microsoft.com/kb/886549

  http://support.Microsoft.com/kb/2258121

  If this does not resolve the problem, create a new administrator account and use it to do the installation.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

• I'm trying to uninstall older versions of Java, I get error1606 cannot access the location %APPDATA%\ network I'm adminastrator how to uninstall?

  I'm trying to uninstall older versions of java, but keep Error 1606 could access the location %APPDATA%\ network I tried everything but not java support says go

  Hello

  I suggest that you run the Fixit in the following Microsoft article and check if it helps.

  You receive an "Error 1606" error message when you try to install or remove a program from Microsoft:

  http://support.Microsoft.com/kb/886549

  Note: If fixit is not enough, then try the steps outlined in Let me fxit muself.

  Hope the information is useful.

• error message 1606 could access the location %APPDATA%\ network

  Hello

  I tried to install office 2007 on my computer. I now have 2003 on my computer. When I try to install I get the error message

  error message 1606 could access the location %APPDATA%\ network

  I have window vista home basic edition. What should I do next. Thank you

  Please try this FixIt:

  http://support.Microsoft.com/kb/2258121

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• If I create a form using the free trial software, will I be able to use and access the form, after the trial period is over?

  If I create a form using the free trial software, will I be able to use and access the form, after the trial period is over?

  Yes, you can access the project that you created after the trial is over, but you need to back it up.

  Concerning

  Stéphane

• Anyone had problems, in the new BC Beta feature, add a web form to a page as a module?  I am able to access the form as normal, just can't seem to add to a page.

  Anyone had problems, in the new BC Beta feature, add a web form to a page as a module?  I am able to access the form as normal, just can't seem to add to a page.

  Is apparently is a problem of Google Chrome browser.  There is no problem in Firefox.  BC said they are working on a solution.

• Unable to access the Windows 7 network or via router or ad hoc homegroup

  I have a very annoying problem. I have 2 computers clean. They were formatted and Win 7 ultimate was installed on both computers. They have a PCI card (D - Link DWA-525) wireless. Their material is identical, the same motherboard, etc., next to "Server" is the pentium 4 and the 'customer' is celeron.

  We have 2 routers and modem 1. The first router, Airport Extreme, serve as a DHCP server and provides the wireless network. The second router (TimeCapsule), supposed to be the first router ethernet extends wireless (Act as a bridge). I can connect to the network and the internet works fine.

  The problem is with the local network.

  I can see the two computers on the network tab. I can ping by IP and name. I made a Homgroup on the computer 'server '. The 'customer' computer is joined I can see the libraries. Firewall computer both are disabled. All firewalls, routers and modem are disabled.

  A double click of the library on the homegroup does nothing. Attempts to access the shared by \SERVER folder or by the tab network gives a "path network not found" error.

  Basis, such as the file and sharing, settings etc, are on. Password sharing is disabled. Encryption is 40-50 (not 128, I don't remember the exact number). It's both for the work at home and Public networks.

  Because I could not access the network, I decided to make a special one. Same problems. Even with the static IP address (192.168.0.1 [Server] and 192.168.0.3 [customer], 255.255.255.0 subnet) and NetBios forced to activated.

  I just can't make it work. I have tried many info from here and other forums, but nothing is working. The worst part is that another PC will join the network, but I have not do it again just because I can't do these PC to work. A test, I put the other PC on the network (Win 7 Home), and the same problem applied.

  All computers can see them in the network, two ping tab ways with IP and name, but when trying to access the pc via network, it gives the network not found error path.

  Yes, I shared files.

  Homegroup troubleshooting and network that find anything wrong or just can not solve the problem.

  Help, please!

  Hello

  The question you posted would be better suited in the TechNet Forums. We have a separate team working on these issues. I would recommend posting your query in the TechNet Forums.

  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?filter=AllTypes&sort=lastpostdesc

  Hope this information is useful.

• The Form(10g) hung who have the ComboBox list item when it runs on JRE

  Hello

  I am facing a problem with the drop-down list box. It works fine on JInitiator, but it doesn't work on JRE (Java). I searched the OTN community that everyone says that the 3 patches must be applied. Is there an alternative solution.

  Developer version

  Forms [32 bit] Version 10.1.2.0.2

  OS: Windows xp Service Pack 3

  Application server:

  Version10.1.2.0.2

  OS: Linux Red Hat

  OS: Windows Server 2003

  Best regards

  Zafar Iqbal

  Zafar,

  There is a known bug with the ComboBox element in Oracle Forms 10g R2 (10.1.2.0.2).  This has been fixed with patches 3 Group (which requires a contract for Support of Oracle download the patch) is why Micheal recommends that you install this group of hotfixes.  If you do not have a support contract - your options are: 1) not to use the ComboBox element. (2) upgrade to the latest version of Oracle Forms on the Oracle Technology Network (OTN), which is Oracle Fusion Middleware 11 g R2 (11.1.2.2.0).  (3) Finally, continue to use the Oracle Jinitiator.

  Craig...

• To access the form field values

  Hi all
  
  I have a form with several fields. I need to change the value of a field as 'Y' and send the form in the java code.
  I used the following
  FacesContext fctx = FacesContext.getCurrentInstance ();
  RichInputText = (RichInputText) fctx.getViewRoot (.findComponent("pt1:r1:Active1")) active1;
  If (active1. GetValue(). ToString(). Equals("Y"))
  active1. SetValue ("N");
  on the other
  active1. SetValue("Y");
  This changes the value, but if I run "Commit" operation using
  bindings.getOperationBinding("Commit").execute ();
  its not saving in dB.
  
  My usecase:
  By clicking on the button, need to change the value of the indicator (field) and submit the form that has to go to DB.
  
  Please suggest me the right way.
  
  Concerning
  Suresh Camille

  can you explain your case to use a little?
  Your first message, I understand you want to access the value of Active1
  You can use this code:

  // get the binding container
  BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
  
  // get an ADF attributevalue from the ADF page definitions
  AttributeBinding attr = (AttributeBinding)bindings.getControlBinding("test");
  //set the val
  attr.setInputValue("newval");
  //get the val
  String val = (String)attr.getInputValue();
  

  your second post, I see that you are editing the text. So I'm a bit confused.

  Timo

• How to access the form during the treatment?

  Hello
  
  How you can access its form during the treatment of a certain task--like a query or run a report - in order to cancel or interrupt this process?...
  
  Thank you...

  To be able to interrupt a query, you can set the Mode 'Interaction' property at the level of the form.
  For any other interruption, you will need to program it one yourself.

• Run the form 10g from the command line

  Hello
  
  I want to execute form 10g from the command line. Can someone help me?

  First the srwAPIins.sql, then the srwAPIgrant.sql script.

  François

• To access the former 'recent calls '.

  I have an iPhone6, using ios9.3.1.

  Is it possible to access the calls before 05/05/2016? It is as far as I'm going right now. Thank you!

  The recent calls list stores about 100 calls. If the call is longer on this list, another option would be to access the call history on your cellular operator's Web site. Most carriers have Web sites where you can log in and see historical details of the calls and other billing details.

• How can I access the forms Wizard to split again if I made a mistake during installation?

  Specifically, I thought he solicited recipient of information but it was really ask what email I wanted the forms sent in so now it is configured to receive answers to one of my recipients. I use Windows 7 and Acrobat X.

  Okay, that's good. The e-mail address it uses may be changed here: Edit > preferences > identity > Email address

• from the how to do to disable the Save button in the form 10g

  Hello...
  
  I developed a custom form when the function save the form I want to disable the button "close in bulk.
  Save here is standard option, there is no button Save.
  
  Please give me a solution
  
  Concerning
  Mohan

  Hello

  To disable a button, use the Set_Item_Property (..., INFLUENTIAL, PROPERTY_FALSE) integrated.

  François