Grand Wega kdf-50e2000 has pink and green bars in the upper part of the screen

Does anyone know why my projection LCD KDF-50E2000 has pink and green horizontal bars at the top of the screen? I replaced the bulb and now I have pink and green bars. In fact before changing the bulb, there was just a pink bar at the top of the screen.

Hello Dale,

The same problem occurs while watching programs features different source connected?

If the TV is connected to the wall socket via Strip/surge of power, plug it directly into a wall socket. This is to check if the problem is with the TV or the power strip/surge.

Reset the TV to factory default from the link below:

http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C89410

If the problem persists, the TV will require repairs.

You can locate the centers of the closest authorized repair the link below.

https://eService.Sony.com

If my post answered your question, please mark it as an "accepted Solution".

Tags: Sony TV

Similar Questions

  • The HP Omni100 5155 PC: HP omni100 5155 red and green lines on the screen

    I used a music cd in my pc one day and the next day I had thin green and red, vertical lines throughout the screen. I did a number of bugs, but the problem persists. I was wondering what I need to do or it sounds like a graphics card? Although I checked it and the message says: "the device is functioning properly."

    I tried the things:

    • updated drivers
    • scanned for viruses
    • cleaned the ram
    • memory diagnostic tool
    • update graphics card

    Sorry, for obvious reasons, I'm not here to sell you a computer.  Most of the all-in-one computer today have the specifications you are looking for, except perhaps the webcam integrated according to the model.  You can see the HP, Amazon or Tiger Direct store as examples.

    If you are looking to buy the same more or less the same model as you have now, they are abandoned or not available unless used or refurbished which I would not recommend it.

    Before doing something drastic, discover the repair costs to the one you have now.

  • Pink and blue stripes then the screen freezes

    The screen will get pink and blue on stripes and then it freezes and must be turned off manually or a battery pull.

    Hello

    You are facing problems with pink and blue stripes and the freezing of the screen.

    -When exactly are you facing this problem?

    -Do you have the question started recently?

    -What is the brand and model of the computer?

    -What operating system is installed on your computer?

    -Did you do changes on the computer before this problem?

    Method 1: I suggest you follow the steps to run the troubleshooter of material from the link and if it helps.

    Open the hardware and devices Troubleshooter

    http://Windows.Microsoft.com/en-za/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2: I also you suggest trying to update display drivers and video card drivers, then check if the problem persists.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    HOEP that helps.

  • HP Jet 7 - has crashed and now stuck on the screen "the HP BIOS update.

    "bought this tablet for my MOM as a birthday present on Sunday, February 28, 15 and now not even a week later the * beep * thing is stuck on the update of the HP BIOS" screen... what the f is this

    The solution is here, you need to run your battery all down until it resets the CMOS.

  • a screen of balck for abt 4 to 4 minutes before the green bar of the screen on startup

    Hello

    I just installed vista Ultimate edition. Whenever I start a black screen appears for 3 to 4 minutes before the grean bar screen

    I installed vista on 2 different machines both gives the same problem

    any help would be appreciated

    Contact the manufacturer of your computer and get the most recent update of the BIOS (for your version of Vista) and install it and see if that makes a difference.  Also check the BIOS settings to confirm that they are all correct and appropriate for the new operating system.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Display a pink and green 'tracks' everywhere. No matter what type of program is used. It starts at startup.

    Display has pink and green runs.

    Then sounds like your monitor has failed / default
    You can borrow another monitor to check?
    Is the same thing happens if you start in safe mode? If it is then a graphics card problem

  • Grand Wega KDF-46E2000 cycling continuous power

    My Grand Wega KDF 46E2000 purchased in 2006, through the next cycle after the power has sat for 5 minutes:

    -Screen goes dark and green on the front of the TV power light of flashes for about 40 seconds. There is no sound during this period.

    -Screen and audio return and are normal for a minute.

    -L' screen darkens again and the cycle repeats continuously.

    I tried to reset to factory settings, but before the start-up of the plant process can end the cycle of the screen / audio started.

    I unplugged the game the next day, I saw in the other posts, but it seems to have no impact on the problem.

    My first thought was a bad projection lamp, but it was not all of the messages on the screen about the lamp, and the light from the lamp on the front of the unit was not activated, as I expect if the lamp was bad. The only indication that I realized maybe that is the problem has been reset in the factory, when the screen was solid gray, and I noticed a slight flicker in the screen around the edges. OTH

    All advice is appreciated - I would avoid buying a new set.

    Thank you!

    I have a KDF-46E3000 that just started doing the same thing. More leave us it on, black screens appear more frequently and I count 76 power LED flashes every time. I turned on the fan to high altitude to try and cool, it's better, even if our home has AC and it still happens. Have you had any luck with the problem?

  • Pink and green lines when jpeg used in iMovie

    Hi all

    I have a strange problem that I can't find an answer to the internet. Whenever I used a file jpeg or png as a background or a picture in picture during a movie, to export the movie space where was the image file is replaced by a series of pink and green "buzzing" or flicking of horizontal lines. I just made that I have updated to the latest version of El Capitan and iMovie (10.1.1). An example of a jpeg file used as background and what looks like the export is attached. It looks good in the iMovie preview.

    Here I use the green screen feature, and it was a video test with just a microphone stand, move around.

    Thanks for any help!

    This type of problem has been tested with iMovie 11 running on El Capitan, but not with iMovie 10.1.1. You said that you went to 10.1.1 and are still seeing this problem. Try to create a new library and new project and see if you can reproduce the problem. Maybe your library 11 iMovie did not upgraded to 10.1.1 correctly.

  • Re: Pink and green screen on the Satellite X 200

    A difficult for all a... my laptop screen is a nice pink and green but if I connect to my TV via HDMI, it works perfectly
    Thank you
    Trevor

    >... but if I connect it to my TV via HDMI works perfectly
    You did very good test. Graphics card is correct and troublemaker is LCD.

    On eBay you can find fairly cheap.
    Can share you one?

  • Satellite A200 - please I need help, the screen goes pink and green

    Hello world

    I have a Satellite A200 and I have a problem with my screen. It appears suddenly pink and green and it resolves on its own or when I close the lid. It starts from the Toshiba logo before windows logon. Please help me, thanks in advance.

    Hello

    You can try to find what's wrong with your laptop if you would connect it to the external monitor.
    If the same question would be visible on the second, the external monitor then this screen problem could be related to the graphics chip.

    If the image on the external monitor would be nice laptop computer s internal monitor could be faulty.

    However, in both cases, you must contact the ASP in your country for replacement.

    Good luck

  • Grand Wega KDF-50WE655 with blue dot/haze

    I have a Sony Wega KDF50WE655, who has developed a bluish mist at the corner of right/bottom edge of the screen. And now, there's a blue dot appears. Can someone give me a clue as to what's going on with this thing?

    From your description, the Wega KDF50WE655 TV needs repair. For more information of Technical Support and repair, please visit our eSupport site: http://esupport.sony.com/US/perl/contac... KDF50WE655

  • 15 HP smart touch: pink and green line Horizontal on my touch screen 15 HP smart

    Hello

    I'm having this problem a few months ago August 2015 rose with a combination of a green horizontal line appear in the middle of my screen with in a few days later the line moved to the taskbar line I said to my self "Yes, I can work with that " so only a few days ago lines moved an inch higher in my screen and there are now 3 horizontal lines of suggestions and you can tell me how can this happen?... and oh... the screen below the line is like flikering? I don't know if that's the word line move fast doward... are pictures 2 on 2 August from Nov.

    This is my system:

    PC laptop Touchsmart HP 15

    OS: 8.1 with Bing 64-bit Windows

    Serial number: [personal information deleted]

    Product number: J8A22UA #ABA

    I just got this laptop on June

    Hi @Sldvrojie,

    Welcome to the HP Forums! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    Thank you for posting. I read your post, and I understand that you have several horizontal lines on the screen of your laptop. I wanted to help with that.

    Here is a document that you can use for troubleshooting:

    HP Notebook PC - troubleshooting an issue of LCD for laptop

    Let me know if you need more assistance.

    To say thank you, click on the "thumbs-up". Accept the post as a solution, so problem solved, so that other people that you have the same problem can see.

    Kind regards

  • My monitor has shadows after every letter I type and my icons of the screen.

    My monitor has shadows after every letter I type and my icons of the screen - how can I make them disappear?

    Hello

    1. All changes made to the computer before the show?
    2. What brand / model of the computer?
    Method 1:
    This problem may occur the display drivers have not been updated. Check out the link and follow the steps to update the drivers.
    You can also visit the link and follow the steps.
     
    Method 2:
    Check out the link and follow the steps to check if a non-Microsoft service is causing a conflict for the problem to occur.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: once the diagnosis is made, follow step 7 of section to configure the computer to start the Normal start.

  • I noticed that my user name in the C drive has disappeared and is displayed under the desk

    original title: save files on the net / backup of the files in the C drive

    These 20 to 30 days, I noticed that my user name in the C drive has disappeared and is displayed under the desk. In addition, whenever I try to save a file on the net on my laptop, this allows me to record only at this location:

    C:\Users\vijai\AppData\Local\Microsoft\Windows\Temporary Internet Files\Virtualized\C\Users\vijai\Documents

    Also in the Solution Explorer, while all other folders category, like documents, pictures, music etc appear in the left panel, these do not appear in the right panel. I also note that a "Application Data" folder appeared under my user name and all files stored in this folder only.

    Can someone help me solve this problem

    Hi, VIJAIRAGHAVANP V,.

    You can try the following steps and check.

    Method 1:

    You can try a system restore to a prior restore point before you have been affected by the issue.

    Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

    To run the system restore, you can consult the following link:

    System restore

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

    System Restore: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

    Method 2:

    If you are still facing problems then try creating a new user account and check if the problem occurs:

    Create a user account

    http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

    If you are not faced with any issue, then check out the following link to correct a damaged account.

    Fix a corrupted user profile:

    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

    Hope this information helps.

  • My mac has crashed and need to transfer the app to another computer.

    My mac has crashed and need to transfer the app to another computer. How do I do that?

    You do not transfer, you are doing a new installation

    You install exactly in the same way you did the 1st time... Put your disc in the drive, and enter your serial number when asked

    .

    Download & install instructions https://forums.adobe.com/thread/2003339 can help

    -includes a way to go to a page to download the Adobe programs if you do not have a disk or drive

    -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

    -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

    -you will need to enter your original serial number during the installation for non-Cloud programs

    - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

    Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

    Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

    -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

    -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

    -Windows or Mac has no importance... 2 on the same operating system or 1 on each

    -Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)

    Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 clouds can help

    -read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

    -or https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

Maybe you are looking for

  • Configuration of update 3 of 3, 0% completed the installation of Vista SP2.

    Original title: [Vista] configuration updated 3 of 3, 0% complete. Hard drive failed on Dell Inspiron 1525 with Vista.  HD replaced and reloaded Vista and everything else.  Couple of days later, came across this problem.  Followed instructions of kb9

  • DVD drive not recognized on laptop with Vista

    on inserting a dvd into the laptop, it does not start automatically, click on my computer, no sign of drive D.

  • IntelliPoint and zoomfunction / Magnifier

    Hello, I use the zoomfunction/magnifying glass. I put it to my mouse scroll button and I can add/remove the magnifying glass with a single click. Very useful.  Everything works fine Windows XP but now I have windows Vista for a few months and there i

  • Impression of the long panoramas with Photosmart Pro B9180

    Is anyway to get a Photosmart Pro B9180 to print panoramas long photo (up to 42 ")? I've read elsewhere that this is possible, but the maximum I was able to print is 13 "x 19". I use the printer with an iMac 27 ", OS Lion and PS Elements 10. I tried

  • Anchor/handle size

    Hi guys,.I'm new to Illustrator and I fight with the line Segment tool. When I draw a line and then try to add another line to its end, the cursor turns into an arrow what I can do is drag the existing line and change its angle and not add another li