Display a pink and green 'tracks' everywhere. No matter what type of program is used. It starts at startup.

Similar Questions

• Pink and green lines when jpeg used in iMovie

  Hi all

  I have a strange problem that I can't find an answer to the internet. Whenever I used a file jpeg or png as a background or a picture in picture during a movie, to export the movie space where was the image file is replaced by a series of pink and green "buzzing" or flicking of horizontal lines. I just made that I have updated to the latest version of El Capitan and iMovie (10.1.1). An example of a jpeg file used as background and what looks like the export is attached. It looks good in the iMovie preview.

  Here I use the green screen feature, and it was a video test with just a microphone stand, move around.

  Thanks for any help!

  

  This type of problem has been tested with iMovie 11 running on El Capitan, but not with iMovie 10.1.1. You said that you went to 10.1.1 and are still seeing this problem. Try to create a new library and new project and see if you can reproduce the problem. Maybe your library 11 iMovie did not upgraded to 10.1.1 correctly.

• Re: Pink and green screen on the Satellite X 200

  A difficult for all a... my laptop screen is a nice pink and green but if I connect to my TV via HDMI, it works perfectly
  Thank you
  Trevor

  >... but if I connect it to my TV via HDMI works perfectly
  You did very good test. Graphics card is correct and troublemaker is LCD.

  On eBay you can find fairly cheap.
  Can share you one?

• Satellite A200 - please I need help, the screen goes pink and green

  Hello world

  I have a Satellite A200 and I have a problem with my screen. It appears suddenly pink and green and it resolves on its own or when I close the lid. It starts from the Toshiba logo before windows logon. Please help me, thanks in advance.

  Hello

  You can try to find what's wrong with your laptop if you would connect it to the external monitor.
  If the same question would be visible on the second, the external monitor then this screen problem could be related to the graphics chip.

  If the image on the external monitor would be nice laptop computer s internal monitor could be faulty.

  However, in both cases, you must contact the ASP in your country for replacement.

  Good luck

• Grand Wega kdf-50e2000 has pink and green bars in the upper part of the screen

  Does anyone know why my projection LCD KDF-50E2000 has pink and green horizontal bars at the top of the screen? I replaced the bulb and now I have pink and green bars. In fact before changing the bulb, there was just a pink bar at the top of the screen.

  Hello Dale,

  The same problem occurs while watching programs features different source connected?

  If the TV is connected to the wall socket via Strip/surge of power, plug it directly into a wall socket. This is to check if the problem is with the TV or the power strip/surge.

  Reset the TV to factory default from the link below:

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C89410

  If the problem persists, the TV will require repairs.

  You can locate the centers of the closest authorized repair the link below.

  https://eService.Sony.com

  If my post answered your question, please mark it as an "accepted Solution".

• Where is the setting to display a notification indicating that the "CAPS LOCK" is activated, any type of program is used?

  Where is the setting to display a notification indicating that the "CAPS LOCK" is activated, any type of program is used?

  Original title: CAPS LOCK.

  Where is the setting to display a notification indicating that the "CAPS LOCK" is activated, any type of program is used?

  There is no native parameter.  Is your keyboard led (if she has a) can be used, OR use a third party program if your keyboard does not have cpome with indicator software (probably it didn't it.)
   
  http://www.georgejopling.co.UK/CapsLock/CapsLock.html

  (Maybe that will do it for you...)

• Microsoft-new Xbox360-problem display of purple and green it is defective?

  I just bought a new xbox360 for Christmas and since the purchase, he showed color display only green and purple. Once when playing adventures with the kinect, all entered colors automatically, but it has not changed and when to use again another day it was back to the purple and green screen.  Not happy at all, the console was very expensive and should work fine.

  Woulds appreciate your advice or any information where I can get help for this problem thank you.

  Hello

  It seems that the cables may need to be plugged in all the way.  In addition, please make sure that the colors are adapting successfully.  Connect it to another TV.  If you still encounter problems with the console, I suggest to go back to the location that you bought.  I hope that this information is beneficial.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• 15 HP smart touch: pink and green line Horizontal on my touch screen 15 HP smart

  Hello

  I'm having this problem a few months ago August 2015 rose with a combination of a green horizontal line appear in the middle of my screen with in a few days later the line moved to the taskbar line I said to my self "Yes, I can work with that " so only a few days ago lines moved an inch higher in my screen and there are now 3 horizontal lines of suggestions and you can tell me how can this happen?... and oh... the screen below the line is like flikering? I don't know if that's the word line move fast doward... are pictures 2 on 2 August from Nov.

  This is my system:

  PC laptop Touchsmart HP 15

  OS: 8.1 with Bing 64-bit Windows

  Serial number: [personal information deleted]

  Product number: J8A22UA #ABA

  I just got this laptop on June

  

  Hi @Sldvrojie,

  Welcome to the HP Forums! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Thank you for posting. I read your post, and I understand that you have several horizontal lines on the screen of your laptop. I wanted to help with that.

  Here is a document that you can use for troubleshooting:

  HP Notebook PC - troubleshooting an issue of LCD for laptop

  Let me know if you need more assistance.

  To say thank you, click on the "thumbs-up". Accept the post as a solution, so problem solved, so that other people that you have the same problem can see.

  Kind regards

• I lost the red, amber and Green Shield logo shown against websites that indicates course to use, how can I implement this?

  Displaying web sites do a search, I used to get the small shield logo appears to the right of each web address.

  This shield was either: -.
  -Red - site at risk
  -Amber - WARNING
  -Green safe to open it.

  I don't know that I have created this via Firefox, but is no longer displays. If that was the case where can I find the etting to implement?

  That must have been added by an extension that check web pages.
  
  It could be WOT (Web Of Trust) or add something from security software.

  Have never reset Firefox because this will create a new profile and you lose installed extensions?

  In this case, you would have a 'old Firefox Data' folder on the desktop.

  • https://support.Mozilla.org/KB/reset-Firefox-easily-fix-most-problems

  It is possible to retrieve the data from the old profile, but be careful not to copy the files corrupted to avoid transporting on the problem.

  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile

• iPhone7 +: what type of glass is used in the display

  I tried to find in the description of apple for the new iPhone7 tech + but see no mention of the type of glass used in the display. Where can I find info on it?

  Type of glass

  Notation for the scratch resistance

  Rating for break resistance

  Hoping it's the sapphire glass, but if it is not mentioned, probably same glass as previous iphone6s +.

  Thank you

  Speculation is prohibited by the Apple Support communities terms of use.

  If it is not in the specifications, we have no way of answering this question.

• Features red and green Qosmio F30-117 - display problems-

  Hello

  I have a qosmio F30-117, and until recently, I was thrilled with everything about it.

  Then, mid session, graphics started to deteriorate, which fixed a reboot.

  Then a few days later, he did it again and this time when I rebooted it came with a display corrupted, a lot of aa in all directions then red and green lines everywhere.

  Managed to get by selecting safe mode with network and got a desktop computer but still with red and green lines everywhere.

  Now its got worse again, when I start the screen of the laptop itself is empty, becomes something because it is not completely black as if it was when its engine turned off, but his Blanck.

  To check I have connected to an external monitor and managed to get again in safe mode with network, but still very bad and always red and green lines everywhere.

  I started to take a ride on the old good www and there are many posters and articles with problems and many mentioning the lines red and green etc...
  so I'm not alone, but no one seems to know exactly what it is.

  Some have mentioned the grateful Toshiba this as a problem and make even if out of warranty repairs.
  Thus, ideas, advice and does anyone know if Tosh have agreed the problem and offer any help?

  Thanks in advance

  Hello

  In my opinion, this looks like a problem of graphics card GPU eventually started to malfunction, and in this case to replace the motherboard.

  > Some mentioned Toshiba grateful that as a problem and make even if out of warranty repairs.
  Thus, ideas, advice and does anyone know if Tosh have agreed the problem and offer any help?

  It doesn't have to be dull I ve also found this update from Toshiba product support page, but there is nothing listed on the problems of F30
  http://EU.computers.Toshiba-Europe.com/innovation/generic/PRODUCT_UPDATE_SUPPORT

  What to say. Seems only a technician ASP might solve your problem, but replacing motherboard is a costly affair so it s your own decision to want to do

  In any case... good luck...

• When I want to delete McAfee anti-virus and installing MSE, I could go to add / remove programs

  When I want to delete McAfee anti-virus and installing MSE could just go to add / remove programs

  Using Add and Remove is only a part of remove. Follow the instructions that McAfee published below:

  How to uninstall or reinstall supported McAfee products using the McAfee Consumer Products Removal (MCPR.exe)
   http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

  Kind regards

• Desperately need help with simple program crashing using Qt and stdlibc ++

  I have a really trivial example that I was unable to get it running no matter what I try. I use ndk2.0.1. The configuration to recreate the problem is simple; the project should link to qt (4.8.2) and stdlibc ++ (not libcpp, libstdc ++).

  (main.cpp)

  #include 
  #include 
  int main(int argc, char *argv[])
  {
      std::cout << "This doesn't work\n";
      return 0;
  }
  

  That's all. You can use any toolchain you want (ntoxg ++ or CQS), seems not to matter. If you use the string of tools qcc, you must explicitly include the paths libstdc ++ and link to him, because it uses default libcpp. Build the project: it should compile correctly. The handle bar I used is here (http://pastie.org/4018541).

  Create the folder bar and deploy. Once I have started the program at this point, it show me the splashscreen for a few seconds and quit (crash)... You will notice:

  * No log output (we expect something of the call cost)

  * a nice base file pending crash

  Browsing the ntox-gdb core file gives you:

  #0  0xb8b5e329 in __gnu_cxx::__exchange_and_add (__mem=0x0, __val=-1)
      at atomicity.cc:36
  36  atomicity.cc: No such file or directory.
      in atomicity.cc
  
  (gdb) backtrace
  
  #0  0xb8b5e329 in __gnu_cxx::__exchange_and_add (__mem=0x0, __val=-1)
      at atomicity.cc:36
  
  #1  0xb8b03471 in __exchange_and_add_dispatch (__val=,
      __mem=)
      at /home/builder/hudson/650-gcc-4.4/svn/linux-x86-o-ntox86/i486-pc-nto-qnx6.5.0/pic/libstdc++-v3/include/ext/atomicity.h:79
  
  #2  _M_remove_reference (this=)
      at /home/builder/hudson/650-gcc-4.4/svn/linux-x86-o-ntox86/i486-pc-nto-qnx6.5.0/pic/libstdc++-v3/include/bits/locale_classes.h:505
  
  #3  std::locale::~locale (this=0xb837d5fc, __in_chrg=)
      at ../../../../../libstdc++-v3/src/locale.cc:89
  
  #4  0xb8b0faa9 in ~basic_streambuf (this=,
      __in_chrg=)
      at /home/builder/hudson/650-gcc-4.4/svn/linux-x86-o-ntox86/i486-pc-nto-qnx6.5.0/pic/libstdc++-v3/include/streambuf:193
  
  #5  std::basic_filebuf >::~basic_filebuf (
      this=0xb837d5e0, __in_chrg=)
      at /home/builder/hudson/650-gcc-4.4/svn/linux-x86-o-ntox86/i486-pc-nto-qnx6.5.0/pic/libstdc++-v3/include/fstream:215
  
  #6  0xb0bbd205 in __cxa_finalize ()
     from /home/preet/bbndk-2.0.1/target/qnx6/x86/lib/libc.so.3
  
  #7  0xb832de67 in _btext ()
     from /home/preet/bbndk-2.0.1/target/qnx6/x86/lib/libcpp.so.4
  
  #8  0xb836a265 in _fini ()
     from /home/preet/bbndk-2.0.1/target/qnx6/x86/lib/libcpp.so.4
  
  #9  0xb0bd46d3 in ?? ()
     from /home/preet/bbndk-2.0.1/target/qnx6/x86/lib/libc.so.3
  
  #10 0xb0bd5d38 in ?? ()
     from /home/preet/bbndk-2.0.1/target/qnx6/x86/lib/libc.so.3
  
  #11 0xb0bbd052 in _cleanup ()
     from /home/preet/bbndk-2.0.1/target/qnx6/x86/lib/libc.so.3
  
  #12 0xb0bbd337 in exit ()
     from /home/preet/bbndk-2.0.1/target/qnx6/x86/lib/libc.so.3
  
  #13 0x080487b0 in _start ()
  

  I have no idea what to do with this stack trace and I was not able to debug the problem more far.

  This question is particularly messed because I did not add any code to Qt on demand; just link to bookstores. Do not link to the Qt libraries will make this piece of code will work perfectly. A link to the Qt code with libcpp instead of libstdc ++ will also code to run as expected.

  This problem has been driving me crazy for the last days coueple and I would really really appreciate help or advice.

  KDAB guys told me it's a bug and they're looking into it.

• MacBook Pro with the Retina Display 2015 screen goes green? Green tint and mist?

  Hello world

  I had this problem for quite a while now. My new Macbook Pro has worked great for a year. Now, after several updates which have me Safari freezes and crashes, and saw that the supported, there is a new problem.

  Whenever I open my Macbook to sleep or completely turn it on, it has a green tint / haze to it. The above is green, the sides of the screen are green. However, it disappears after 10 minutes. At the moment it is perfectly fine. The screen is the perfect color, it should be.

  Why does this happen?

  I have not dropped, spilled coffee or something like that. Sometimes I slide it clean with a cloth Microfiber, but very gently.

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• Trackpad of MacBook Pro gets stuck and the screen freezes with pink and yellow lines

  So I'm really frustrated. I got my Macbook pro less than a year ago and Ive already had to get a bunch of replaced parts. I got my computer fixed as 3-4 weeks ago and they had to replace a lot of things (can't remember not what it was, but they had to remove all of the computer and replace some things that have been associated with the battery power /). Recently my computer did this weird thing where the screen freezes and pixelated pink and yellow lines will take right on the screen. In addition, the trackpad will be just stuck and I have to turn off my computer and turn it back on so that everything works. Someone at - he heard about something like that? I thought that maybe when I had my computer repaired they didn't replace not all properly? I did a check of the hardware on my computer (self-control an Apple recommended prior to an appointment at the Genius Bar) and he said that everything was going well. This poll looks like a hardware problem? Could this be a virus? Someone hack into my computer? I don't know, I'm just worried and frustrated :/

  Thank you!

  Photographing display abnormalities and make an appointment at an Apple store genius bar.  You are still in the warranty period and you have the properly repaired MBP.

  Ciao