Graphic on screen double the size. All future pages indicating 100%

Similar Questions

• How can I increase the size of a page IE: 100%, 150%, 200%

  the screen is too small, that I can't read.

  First, try pressing Ctrl-0 (zero). This puts the zoom to 100%. If you want more zoom, press Ctrl +.

• Scaling fonts does not work properly - 125% is to double the size of 100%

  Hello

  I just got a new monitor with a resolution of 2560 x 1440, and now I have problems with the font size. The setting of 100% is extremely low, but then when I put the setting to 125%, fonts are at least double the size. A value of 110% is also significantly higher than 100%. I also note that in the window where I put the scaling, the sample policy shown at 100% is longer so that I can see actually in the system.

  Here some screenshots:

  http://www.the-ninth.com/demo/fontscaling/100Prozent.PNG
  http://www.the-ninth.com/demo/fontscaling/100Prozent_2.PNG (comparison with the actual size settings dialog box)
  http://www.the-ninth.com/demo/fontscaling/110Prozent.PNG
  http://www.the-ninth.com/demo/fontscaling/125Prozent.PNG

  Y at - it an explanation of why the setting of 100% is so small?

  Cheers, Robert

  Hello

  I understand that you are facing problems with the police in your computer.

  I suggest you consult the following Microsoft articles and check if it helps you to set the size of the correct font on the computer.

  Method 1:

  You can read these articles Microsoft and check if it helps.

  Make the text on the screen larger or smaller

  http://Windows.Microsoft.com/en-us/Windows7/make-the-text-on-your-screen-larger-or-smaller

  If the problem persists, I suggest to change the resolution of the screen and check if it helps.

  Change your screen resolution

  
  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  Method 2:

  If the problem persists, I suggest you to update the video card drivers and check.

  To do:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  You can also see the following article for more information.

  Get the best display on your monitor

  http://Windows.Microsoft.com/en-us/Windows/getting-best-display-monitor#getting-best-display-monitor=Windows-7

  Hope this information is useful. Please let us know if you need further assistance.

• Logitech C920 sequences is more than double the size of the original file

  Hi all

  I'm very new to adobe Premier Pro and I am just a little overwhelmed by the software. Here is my configuration of curect.

  Webcam: Logitech C920

  MIC: Blue Yeti

  I record video using OBS and it generates a file in the MP4 format. About a 10-minute film is at most 200 MB. Now, when I go to edit the clip in Premier Pro I understand that I must first begin a new sequence. This is my first problem: there is no predefined sequence that matches the C920 Locitech. So for now I'm just drag and drop the file into the time line. Is this correct?

  I can do the basic changes for now and that's fine, the problem comes when I go to export the images. I used H.264/Custom upstairs (MP4 format), I leave everything as it was. only 2 things I edit are the maximum and minimum flow for 10/16. I also check the box use overview at the bottom (I think that's what it was called) now when I hit Caryl export my PC Suite for about 10/15 minutes and give me a file that is about 700 MB in size. This is more than double the size of the original file. Why is this?

  If there is more information you need, I'll do my best to advise.

  Thank you

  If the C920 clip is the first clip you fall into an empty timeline, first expected to ask if you want to change sequence settings to match the clip (unless it is already). To be sure, simply right click on the clip in the project bin and select new sequence of the Clip and they will match for sure.

  The size of the exported video file is dictated by one thingand it is not frame size or frame rate - sampling rate is what determines the size of the file. If you want to halve the size of output file, you will need to reduce the flow rate by half.

  Rather than using Custom, maybe find a predefined existing H.264 which you gives the combination of quality and size of the file that you like? Make sure that the size of the image and the frame rate matches the source. How do you want to display or distribute material - on computer, on a device, online?

  I do not use the option use the previews - that means you take a temp make file and redisplay (transcoding) there again, adding a new generation of compression loss. By not checking this box, first visit the direct export from the source element format, by cutting out the middle man. I do not have a clip that is so effects loaded it will not play in the timeline panel to check the results, I don't bother making anything green. Everything is done at time of export anyway.

  Red, yellow and green make bars and what they mean. First work Pro area

  Thank you

  Jeff Pulera

  Safe Harbor computers

• How to customize and difficulty permanently the size (zoom %) web pages in Firefox that Internet Explorer is: view - Zoom - Custom (percentage).

  How do I customize and fix permanently the size of web pages (zoom %) in Firefox than Internet Explorer is:
  View - Zoom - Custom (percentage).

  Thank you

  This can help you.

  https://support.Mozilla.com/en-us/questions/894000

• Size of Virtual Machine in the Finder is Double the size of virtual machine in Fusion

  I run a virtual disk of Windows 7 Home Premium to professional Fusion 5.0.2; the host operating system is 10.8.2. The sparse disk size is set to 40 GB. After the Windows defragmentation and cleanup of the virtual machine, Fusion 5 General preferences pane indicates the total size of the VM as 33.2 GB. I have not instant. The problem is that the size of the virtual machine, as shown in the Finder is 70,56 GB. My offsite backup drive is full and I'm trying to reduce the size of the backup set. How can I reduce the size of the virtual machine, as shown in the Finder to match the size of the virtual machine as shown in the merger? Thank you.

  According to the files in the folder and the newspapers, it seems that there is a problem with the (assumingly in October 2011) virtual machine and the virtual machine was back on the basic disk, making useless existing snapshot!

  What you can do - make sure that you have a full backup - is to properly close the virtual machine, and then move all files from snapshots (files hard with 00000 x in their file name) to another folder and power on the virtual machine again. If this works as expected you can delete obsolete files.

  André

• Why lines appear exactly double the size I specified?

  I want a rectangle with a thick pixel boarder.

  I draw a rectangle and adjust the boarder at 1px.

  The border is now 2 pixels wide.

  I have change to 4px, it's 8 pixels wide.

  I align the Center, inside, outside, the thickness does not change (but the functions work properly).

  I was fighting this problem all day. Any help?

  Sorry, I solved it myself, but I'll leave this here in case someone else does something stupid like me.

  Solution: Use zoomed implemented to determine the size of a pixel is. InDesign displays of things smaller than pixels that can be misleading.

• change the size of the swf according to the size of html page

  Hi experts
  I want to change my swf size according to the size of the html page in which she opens
  such as if the page size is 1024 x 768 then swf should scale to this size
  If its 700 per 500 also sw should change its size is possible
  I want this for my animation initially FRO m edge on the page
  
  Basically, I do not know how this has tried various options for last week no chance
  There are 100% option for swf that will scale the size of the swf to 100% of the page, but it does not toedge of page edge
  
  can anyone help

  Quote:
  Posted by: newsgroup user
  Thanks urami who worked

  Darr_darshan wrote:
  > Hi experts
  > I want to change my swf size according to the size of the html page in which it
  > open
  > such as if the page size is 1024 x 768 then swf should scale to this size
  > If its 700 per 500 also sw should change its size is possible
  > I want this for my animation initially FRO m edge on the page

  First of all, the size of the screen is never the same as the size of the browser to not use if
  you want to keep the proportions when scaling your files and do not distort the
  content. Keep in mind that the browser has its chrome all around, more grand, being on top
  of the screen (navigation), bar State and borders on the left and right sides.
  Second, always resize movie to the top, never down. While the scaling of movie you able to
  Keep your text, not the case when you descale movies especially with small text.
  who become illegible. Then you make movies in (example) 600 x 400 and intensify their
  instead.

  To fill the browser window, go to file - publish setting and on the HTML tab
  change the PIXEL size of PERCENT and set 100% x 100% - publish.
  Open the published html document recently opened in your favorite HTML editor, such as Notepad.
  Dreamweaver and Frontpage, adjust the margins up, down, left and
  right to zero pixel. This will make it fill the window entirely. Flash is
  not give this possibility.

  --
  Best regards

  Urami

  --

  !!!!!!! Merry Christmas!
  &
  Happy new year

  
  If you want to send me a message - DO NOT LAUGH at MY ADDRESS
  

• Printer Epson WF-7520 you see not the size of InDesign page

  New printer, Epson WF-7520 is not put on the scale of sizes. Scenario: 19 x 13 document; the picture fills the page. Send to printer and printing paper of good size, but the image is in the center of the paper half. Printing marks appear. I tried all the options using the InDesign print dialog box. I called Epson and they do not have a solution. Any ideas >

  found solution... Finally.

  Print > change the printer settings > select correct tray. That has fixed the size of the image.

• Can I change the size of my page file?

  If I change the size of the page file, I see an increase in the performance of the system?

  Leaving the page set to automatic file size is usually more effective.  Any improvements you might see by increasing the size of the file would be minimal, at best.

  A good explanation of how virtual memory and how the swap file can be found at:

  http://windowshelp.Microsoft.com/Windows/en-us/help/fd3e9104-1076-4600-9F9D-8739849387ec1033.mspx

• Script to display the size of InDesign pages instead of the size of the Document format

  Hello, I have been very kindly helped with the script (using a text variable), which displays the size of the current page within an InDesign document below.

  The result gives it is based on Document format, and I was wondering if it was possible to amend it to base the result on the size of the Page instead (as you can now change the size of the page regardless of the configuration Document in InDesign using the Page tool). I don't know anything about the scripts by the way!

  Thank you very much in advance for any help.

  var doc = app.activeDocument;

  doc.viewPreferences.horizontalMeasurementUnits = MeasurementUnits.millimeters;

  doc.viewPreferences.verticalMeasurementUnits = MeasurementUnits.millimeters;

  var l = doc.documentPreferences.pageWidth,

  h = doc.documentPreferences.pageHeight,

  PageSize = app.activeDocument.textVariables.itemByName ("PageSize");

  pagesize.variableOptions.contents = h + w + "X mm", "mm";

  Try this,

  var doc = app.activeDocument;
  doc.viewPreferences.horizontalMeasurementUnits = MeasurementUnits.millimeters;
  doc.viewPreferences.verticalMeasurementUnits = MeasurementUnits.millimeters;
  for(var i =0;i
  Kind regards
  Cognet
  		   

• Why my screen background image get doubled in size all of a sudden?

  My background image screen is all messed up.  I changed the image and now every photo, I try to set as background is too much and very grainy.  I have no idea of what happened, and I'm sure it's an easy fix... I don't know what it is.

  Change your resolution to a native of your screen:

  Start > Control Panel > appearance and personalization. Click personalization, click display settings. Under resolution, move the slider to the right size. If you have a laptop or a flat screen monitor, using its native resolution. Native resolution of your laptop in the documentation provided with your computer (which can be in a file on the hard drive) and will also be on the mftr computer tech support site. for your model. Native resolution of your screen will be in the documentation that came with the monitor and sometimes on the protective plastic sheet that was covering the screen.

  MS - MVP - Elephant Boy computers - don't panic!

• import of comps that reference the same project files without doubling the size of the ae file?

  Hello, I am currently working on a major project that has me constantly to reimport old comps that reference the same project files. The thing is that when I do this AE re-imports all project again files when it is attached to the computer that I imported. My question is is there a (fast) way to remove references of redundant project in the project tab file, or there at - it another way to import a model without creating this double entry in the project tab?

  Thank you guys!

  Sorry, Yes, you can do this by using the command consolidation (file > consolidate all sequences).

  This will remove all duplicates.

  See this Help on AE page for more information.

• Why is my hard disk so full, double the size of important things in the file Explorer?

  My 222 GB HDD is almost full (6.65 GB of free) but I can only represent 100 GB through to Explorer to count the volume of used, including hidden files - by looking at what is individual folders and their subfolders suggests that this lower position is correct. What takes all the space? Can we recover some of them? I am running Vista Home Premium SP2 on a Dell Studio 1535, equipped with a recovery of 10 GB drive (4.34 GB used). I did disk cleaning, including deleting past restore points, check the disk, Defrag, internet deleted files and searched malware. My maximum storage space is 33 GB and my pagefile is 3.97 GB. I started to compress the drive, but that seems to be dodging the real problem.

  Hello

  This option to delete is in Windows Disk Cleanup.

  And it will then remove those that are no longer seen work done on them for some reason any.

  Who has always been a scarecrow as recommended by Windows, or used, that you leave them there for a week and remove if they were still there even the work that Windows has been done on them, after a week, being finished.

  It has always been an unsatisfactory explanation for my reasoning.

  You can also get to them using the command: folder

  Here are some tips on this subject:

  http://pcsupport.about.com/od/maintenance/HT/manualtempvista.htm

  First of all, as they are now known, run clean disc again, making sure that the Temp files for detected option is checked.

  And many people like to use this cleaning program too;

  http://www.Piriform.com/CCleaner

  But do NOT use the Registry Cleaner to this part.

  See you soon.

• Why this DLL to double the size of array?

  Here's some code for a simple DLL that I use as a test case.  LabVIEW pré-alloue memory by initializing arrays of 19 and 21 items, but the output of the function is an array of 38 and an array of 42.  Why would he do that?

  _declspec (dllexport) int split_array (unsigned char * array_in, unsigned char * split1, unsigned char * split2);

  int split_array (unsigned char * array_in, unsigned char * split1, unsigned char * split2)

  {

  int i;
  for (i = 0; i< 19;="">

  {

  Split1 [i] = array_in [i];

  }

  for (i = 19; I)< 40;="">

  {

  Split2 [(i-19)] = array_in [i];

  }

  return 0;

  }