Why this DLL to double the size of array?

Similar Questions

• Why lines appear exactly double the size I specified?

  I want a rectangle with a thick pixel boarder.

  I draw a rectangle and adjust the boarder at 1px.

  The border is now 2 pixels wide.

  I have change to 4px, it's 8 pixels wide.

  I align the Center, inside, outside, the thickness does not change (but the functions work properly).

  I was fighting this problem all day. Any help?

  Sorry, I solved it myself, but I'll leave this here in case someone else does something stupid like me.

  Solution: Use zoomed implemented to determine the size of a pixel is. InDesign displays of things smaller than pixels that can be misleading.

• Scaling fonts does not work properly - 125% is to double the size of 100%

  Hello

  I just got a new monitor with a resolution of 2560 x 1440, and now I have problems with the font size. The setting of 100% is extremely low, but then when I put the setting to 125%, fonts are at least double the size. A value of 110% is also significantly higher than 100%. I also note that in the window where I put the scaling, the sample policy shown at 100% is longer so that I can see actually in the system.

  Here some screenshots:

  http://www.the-ninth.com/demo/fontscaling/100Prozent.PNG
  http://www.the-ninth.com/demo/fontscaling/100Prozent_2.PNG (comparison with the actual size settings dialog box)
  http://www.the-ninth.com/demo/fontscaling/110Prozent.PNG
  http://www.the-ninth.com/demo/fontscaling/125Prozent.PNG

  Y at - it an explanation of why the setting of 100% is so small?

  Cheers, Robert

  Hello

  I understand that you are facing problems with the police in your computer.

  I suggest you consult the following Microsoft articles and check if it helps you to set the size of the correct font on the computer.

  Method 1:

  You can read these articles Microsoft and check if it helps.

  Make the text on the screen larger or smaller

  http://Windows.Microsoft.com/en-us/Windows7/make-the-text-on-your-screen-larger-or-smaller

  If the problem persists, I suggest to change the resolution of the screen and check if it helps.

  Change your screen resolution

  
  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  Method 2:

  If the problem persists, I suggest you to update the video card drivers and check.

  To do:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  You can also see the following article for more information.

  Get the best display on your monitor

  http://Windows.Microsoft.com/en-us/Windows/getting-best-display-monitor#getting-best-display-monitor=Windows-7

  Hope this information is useful. Please let us know if you need further assistance.

• Logitech C920 sequences is more than double the size of the original file

  Hi all

  I'm very new to adobe Premier Pro and I am just a little overwhelmed by the software. Here is my configuration of curect.

  Webcam: Logitech C920

  MIC: Blue Yeti

  I record video using OBS and it generates a file in the MP4 format. About a 10-minute film is at most 200 MB. Now, when I go to edit the clip in Premier Pro I understand that I must first begin a new sequence. This is my first problem: there is no predefined sequence that matches the C920 Locitech. So for now I'm just drag and drop the file into the time line. Is this correct?

  I can do the basic changes for now and that's fine, the problem comes when I go to export the images. I used H.264/Custom upstairs (MP4 format), I leave everything as it was. only 2 things I edit are the maximum and minimum flow for 10/16. I also check the box use overview at the bottom (I think that's what it was called) now when I hit Caryl export my PC Suite for about 10/15 minutes and give me a file that is about 700 MB in size. This is more than double the size of the original file. Why is this?

  If there is more information you need, I'll do my best to advise.

  Thank you

  If the C920 clip is the first clip you fall into an empty timeline, first expected to ask if you want to change sequence settings to match the clip (unless it is already). To be sure, simply right click on the clip in the project bin and select new sequence of the Clip and they will match for sure.

  The size of the exported video file is dictated by one thingand it is not frame size or frame rate - sampling rate is what determines the size of the file. If you want to halve the size of output file, you will need to reduce the flow rate by half.

  Rather than using Custom, maybe find a predefined existing H.264 which you gives the combination of quality and size of the file that you like? Make sure that the size of the image and the frame rate matches the source. How do you want to display or distribute material - on computer, on a device, online?

  I do not use the option use the previews - that means you take a temp make file and redisplay (transcoding) there again, adding a new generation of compression loss. By not checking this box, first visit the direct export from the source element format, by cutting out the middle man. I do not have a clip that is so effects loaded it will not play in the timeline panel to check the results, I don't bother making anything green. Everything is done at time of export anyway.

  Red, yellow and green make bars and what they mean. First work Pro area

  Thank you

  Jeff Pulera

  Safe Harbor computers

• Open/save windows - why they don't remember the size?

  In my numerous amounts of frustrating things I have found in CC, here's another.

  In CS when I resized the window open in Photoshop, it always opened for same size window each time I used the command open. Same deal with registration order. Now in CC whenever I use, either of the two it goes back to a default open size. I wish I had bigger windows, so I see all of my folders sidebar.

  Why Adobe? CS worked so smoothly and smooth and each program CC I used (Illustrator, Photoshop, Dreamweaver, InDesign) ALL have me frustrated. I like is no longer using your programs and it's a shame that I've always been a "fanboy." Why do you want to remove features that were useful and worked! Do not be to distracting on this subject, but another little frustrating thing in Photoshop is used to be able to right-click on the name of the file at the top of the window and see the hierarchy of folders, now I can't, and instead of it, I have to choose "reveal in finder" instead so now I have an open finder window?

  So here is the question of size of menu to stay on topic:

  Everytime I open a window, it's always this size even when I change it as below:

  

  It's the size that I want, and Photoshop CS to remember because he was smart:

  

  And when I save it is even MORE annoying because the window always good slap up against my dock, by hitting doc possible points, not to mention annoying to have to mouse so far down on the screen. I like to work fast and these little resize whenever questions slow me down.

  

  It's a known on MaCOS 10.11 bug that affects many applications.

  Apple has been informed of the bug OS and said they are trying to solve.

• don't get open email addresses do not message, then possibly the email opens; Why this took place over the 2 or 3 days?

  During 2-3 days when I try to open an e-mail or delete an email I get "not responding" after 30 seconds or so him "unresponsive" goes then and I can open the e-mail or delete it. Why this is happening now and how can I fix it? It is very annoying to have to wait to read or delete an e-mail. I compact the file whenever the message appears on my screen.

  https://wiki.Mozilla.org/Thunderbird: test: Antivirus_Related_Performance_Issues #McAfee

• Why this disable structure encapsulating the loop for that I'm falling?

  In the middle of coding and debugging I noticed something weird... now I'm just curious.

  Here is what happened (audio WARNING may be a bit much, fans of pumping in a warehouse im in...):

  https://www.YouTube.com/watch?v=vC9BKJ0CwmY

  I'm really just curious to know why this is happening - it seems that there is the note of "make sure wire you the error" fault behind the loop that the disable struc overlapped a bit...

  Why the struc disable that first, I dropped in this video did seize all of the loop?

  -pat

  You have this decoration of the label on your block diagram behind your loop For. When you put the new business structure, he captured this label which is outside the loop For. This forces the case structure to take the loop too, since it is the only way to recover the property node and label.

• Size of Virtual Machine in the Finder is Double the size of virtual machine in Fusion

  I run a virtual disk of Windows 7 Home Premium to professional Fusion 5.0.2; the host operating system is 10.8.2. The sparse disk size is set to 40 GB. After the Windows defragmentation and cleanup of the virtual machine, Fusion 5 General preferences pane indicates the total size of the VM as 33.2 GB. I have not instant. The problem is that the size of the virtual machine, as shown in the Finder is 70,56 GB. My offsite backup drive is full and I'm trying to reduce the size of the backup set. How can I reduce the size of the virtual machine, as shown in the Finder to match the size of the virtual machine as shown in the merger? Thank you.

  According to the files in the folder and the newspapers, it seems that there is a problem with the (assumingly in October 2011) virtual machine and the virtual machine was back on the basic disk, making useless existing snapshot!

  What you can do - make sure that you have a full backup - is to properly close the virtual machine, and then move all files from snapshots (files hard with 00000 x in their file name) to another folder and power on the virtual machine again. If this works as expected you can delete obsolete files.

  André

• Why my cursor is now the size of the leg of the Ant?

  Why has my cursor become so small?  It's about the size of leg of tiny ants lately.

  It is very difficult to place images in the area centered in any cell... and it's almost impossible to even see Flash.

  I looked through preferences... but found no clue.

  Also... How would approach a setting of the area of a Web site down to midway between the top edge of the browser's screen?

  Earlier my external site with CSS has the site well supported on the top of the screen.

  But I like it a little...

  Thank you!

  Jn

  How would approach a setting of the area of a Web site down to midway between the top edge of the browser's screen?

  Vertical centering is a print design concept that does not have much value on the web because everyone uses different views and viewport sizes.  What looks good on your screen is going to be very different on a smaller device web (think Tablet & SmartPhone users).

  I think that the best you can do is add a bit of top margin to your page with CSS.

  {body

  Width: 900px;

  top of the margin: 45px; * adjust as needed * /.

  }

  Nancy O.

  ALT-Web Design & Publishing

  Web | Graphics | Print | Media specialists

  http://ALT-Web.com/

  http://Twitter.com/ALTWEB

  http://ALT-Web.blogspot.com/

• Why is my hard disk so full, double the size of important things in the file Explorer?

  My 222 GB HDD is almost full (6.65 GB of free) but I can only represent 100 GB through to Explorer to count the volume of used, including hidden files - by looking at what is individual folders and their subfolders suggests that this lower position is correct. What takes all the space? Can we recover some of them? I am running Vista Home Premium SP2 on a Dell Studio 1535, equipped with a recovery of 10 GB drive (4.34 GB used). I did disk cleaning, including deleting past restore points, check the disk, Defrag, internet deleted files and searched malware. My maximum storage space is 33 GB and my pagefile is 3.97 GB. I started to compress the drive, but that seems to be dodging the real problem.

  Hello

  This option to delete is in Windows Disk Cleanup.

  And it will then remove those that are no longer seen work done on them for some reason any.

  Who has always been a scarecrow as recommended by Windows, or used, that you leave them there for a week and remove if they were still there even the work that Windows has been done on them, after a week, being finished.

  It has always been an unsatisfactory explanation for my reasoning.

  You can also get to them using the command: folder

  Here are some tips on this subject:

  http://pcsupport.about.com/od/maintenance/HT/manualtempvista.htm

  First of all, as they are now known, run clean disc again, making sure that the Temp files for detected option is checked.

  And many people like to use this cleaning program too;

  http://www.Piriform.com/CCleaner

  But do NOT use the Registry Cleaner to this part.

  See you soon.

• Why this I suddenly get the wheel buffering during playback of videos in the site watchserie

  only in the last days I get the intermintint buffering of wheel during video playback, I updated the plug Adobe need a update, but did not help yet. I have activated my volume control upward a few days ago but do not think that this would have caused a problem. Seems to be only this site watchserie.ch where it is, but it's a great site for old TV shows

  I was playing vids without problem for months, and all of a sudden, it starts why hardware acceleration all at once would be a problem? I try it, but I'm also thinking about alternative o/s microsoft XP is a total stupidity and microsoft is a garbage company.

• Why Windows Vista automatically changes the size of the window when I load a program?

  I want a full screen.  Vista will load the program with 1/4 window size or 1/2, etc. instead of full page size.  How can I tell to stop doing that?  This happens with programs and Internet Explorer.

  Hello

  Try this method for the opening of size problems

  http://www.theeldergeek.com/maximize_internet_explorer.htm

• Newbee question: why a RTF model increases the size of the cells on the output

  We are new to BI publisher and work to the conversion of our custom reports to BI Publisher crystal. We currently use PeopleSoft 9.1 with 8.51.12 tools and are about to upgrade to 9.2 next year. Our office of BI Publisher comes bundled with peopleSoft and that our version of BI Publisher Core is 10.1.3.4.1. Then we use Office 2013. I started to look into these reports and found something that I do not understand:

  When you add a simple table to the model, the filling of a field and running an overview pdf size are increased and spacing is added above and below the text. I looked through all the spacing options I know, but can't seem to find where I can change this.

  

  Any suggestion will be appreciated...

  Thanks for the files.

  Data from the xml structure is to have a new line of character as below

  Instead of

  and if the additional lines were added in the output.

  To avoid this, you need to cut the space beginning and end.

  So, to add the syntax like

  and the result will be like this

  

• import of comps that reference the same project files without doubling the size of the ae file?

  Hello, I am currently working on a major project that has me constantly to reimport old comps that reference the same project files. The thing is that when I do this AE re-imports all project again files when it is attached to the computer that I imported. My question is is there a (fast) way to remove references of redundant project in the project tab file, or there at - it another way to import a model without creating this double entry in the project tab?

  Thank you guys!

  Sorry, Yes, you can do this by using the command consolidation (file > consolidate all sequences).

  This will remove all duplicates.

  See this Help on AE page for more information.

• Graphic on screen double the size. All future pages indicating 100%

  turned on my computer today and all the icons displayed extra-large and all internet pages show 100% but fall to 60%, to adapt to screen.help which makes it blurry

  turned on my computer today and all the icons displayed extra-large and all internet pages show 100% but fall to 60%, to adapt to screen.help which makes it blurry

  Suggestions...

  1. you said "turned my computer today...". »

  Does this mean it was ok yesterday?

  If so, do a system restore. Select yesterday or the day before yesterday as your restore point.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  2 reset DPI

  http://www.Vistax64.com/tutorials/84233-DPI-scaling.html

  3 set the resolution of the screen

  http://www.Vistax64.com/tutorials/84291-screen-resolution.html

  4. you can go to the website of your computer manufacturer and see if your graphics card driver needs to be updated.