graphical representation of the partial circles

Similar Questions

• Graphical representation of the different channels separately

  I'm a VI design that acquires data from 3 different channels (voltage). The data from each of these channels must be converted separately (user-defined) in other quantities (say, pressure, temp and force). Am I voltage data acquisition and using the formula with coefficients powered by user to convert the data.

  However, I would like to be able to store the data of the amd chart separately. In the above procedure, the signals of all channels are under conversion. I want each channel to undergo a conversion specific and graphic and store the data for each channel separately. How can I do this? Please suggest.

  Thank you

  Dheeraj salvation,

  The order of the signal depends on the order of the DAQ chain that you configure. I think that the signal of channel (ai0) 0th will be available in the branch above the page which is the tension in your case.

  You can mark it as a solution if your problem is resolved so that others can also get help on the wire later. Do not hesitate to ask if you have more doubts.

  Kind regards

  Amine31

  (Bravo to give good answers, mark it as a Solution If your problem is resolved)

• View a graphical representation of the Vista disk defragment process like XP only?

  I'm looking to watch my disk defragment visually as you can in windows XP, with the red and blue lines. is it possible to raise this view in windows vista? currently I can trigger a disk defragment on place or plan a regularly, but I have no way to monitor the progress made during the process.

  Vista doesn't have a graphic display just like XP.

  Vista disk defrag works quietly in the background.

  You need 3rd party Software for what you want:

  http://www.SnapFiles.com/reviews/Auslogics-Disk-Defrag/adiskdefrag.html

  Auslogics Disk Defrag is a disk defragmentation tool that supports FAT 16, FAT 32, and NTFS volumes. It defragments supply with demand automatic defrags when your system is idle and advanced options to customize the files that will be défragmentées.

  http://www.SnapFiles.com/reviews/IObit-SmartDefrag/iobitsmartdefrag.html

  Smart Defrag is a Disk Defragmenter automatically keeps your hard disk space does not become too defragemented, which may cause slower disk performance. It works continuously in the background while your computer is idle and requires no further user for basic maintenance intervention. The program also includes an option of manual defragmentation as well as support for the regular defrags and with optional file system optimization.

  http://www.SnapFiles.com/reviews/UltraDefrag/UltraDefrag.html

  UltraDefrag is an Open Source disk defragmentation tool that offers a quick Defrag, using a pilot based on the kernel. It offers a simple with a cluster map display graphical user interface, as well as command line interface and scheduling option. The program supports full defragmentation and defragmentation of space (compression) and you can include/exclude files or folders based on their name or their size. Other features include HTML reports and the boot time defragmentation. (Does not work on Vista x 64)

  http://www.SnapFiles.com/reviews/Diskeeper_Home/Diskeeper.html

  Diskeeper Home is a fully automatic defrgmentation engine that replaces the standard Windows Defragmenter. Built-in defragmenters are manual resource only, consuming and require full administrator privileges to operate. Execution of Diskeeper is like hiring an expert to monitor constantly and to maintain the maximum performance of your systems. Diskeeper is the fastest defrag engine ever built. National Software Testing Lab (NSTL) proven 300 to 500% faster and much more thorough than the built-in defragmenters. The program includes a unique feature set it and forget it with smart planning, which, once set, works invisibly and automatically in the background. In addition, the Frag Guard feature to avoid fragmentation in your most critical system files. Additional features include starting defrag, priority settings and the ability to defragment multiple disks simultaneously and automatically while the system is in use.

  See you soon. Mick Murphy - Microsoft partner

• Graphical representation of the difficulties

  I have a Kiethley2100 and a Kiethley199 I try to use tgether to draw two curves of different voltage, HOWEVER, I am unable to get the chart to display something other than the current tension. I know it's funny formulated, the graph has a point that is located on the 0 for the time mark and moves up and down like changes in voltage, but he refuses plot points ago. I understand how to draw a line between two distinct points on the chart (line interpolation). Is there a way to format the X axis to indicate the correct time for which points were taken?

  Hi strings,

  It sems you are very new to LabView. So, you should:

  -read the help and always light the contextual help

  -check the eamples that come with LabView

  -follow the (free) online courses in the University section

  You can create shift registers by clicking with the right button on the edge of loops (for/all)...

• Pneumatic schema / proportionally correct wheel of the dynamic circle

  Hi, I use actionScript to dynamically draw a diagram of a wheel with tire, but it made its appearance the right size. The diagram should be drawn using three pieces of incoming information (from JavaScript):

  num_wd_mm (diameter of the wheel) is the diameter of the metal wheel, which fits the tyre rubber.

  num_ph_mm (height) = the height of inside outside the tire rubber itself.

  num_ODmm (overall diameter) = the diameter of the whole thing (wheel diam + height profile)

  Sounds simple, isn't? But it is difficult to do the math necessary to draw the diagram with precision, because the diameter of the wheel is represented by a full circle and the circle race tire. The width of the line is the circumference of the circle filled with half and half inside the outer edge.

  The key is the correct outline width, while represents the tire rubber with precision, it compensates for the fact that it is only the display outside the circle of half of its width, and he rides inside the circle by half of its width also (fill circle should appear to be is the diameter of the wheel because it's what he represents in the diagram.)

  Here is how I had tried it, but I can see that the overall diameter is wrong:

  / / The scale for the graph is:

  var MMtoPX:Number = 3.5;

  //Set vars for dynamic circle

  var strokeWidth:Number = num_ph_mm/MMtoPX;

  var circleRadius:Number = ((num_ODmm+num_wd_mm)/2) / MMtoPX;

  / / Draw the dynamic circle

  circle.graphics.clear ();

  circle.graphics.lineStyle (strokeWidth, 0x000000);

  circle.graphics.beginFill (0x0000FF);

  circle.graphics.drawCircle (circleX, circleY, circleRadius);

  circle.graphics.endFill ();

  Initially, it seemed that it would be simple, but all combinations possible amounts that I try produces incorrect results.

  In addition to what AHernandezIP, traits are overlapping fills (half of the thickness of line) - it's one of the reasons why is not worth trying to find adequate compensation. If, say, a circle radius is 100 and accident stroke is 20 - combined radius of the circle that results will be 120 (100 + 10 on each side). So, it is much easier to draw two circles. One of the ways:

  var circle:Sprite = new Sprite();
  var gr:Graphics = circle.graphics;
  var outerRadius:Number = 100;
  var innerRadius:Number = 60;
  // draw two crcles in one swap
  gr.beginFill(0x6C0000);
  // draw bigger one
  gr.drawCircle(0, 0, outerRadius);
  gr.endFill();
  // change fill color
  gr.beginFill(0xC0C0C0);
  // draw smaller circle
  gr.drawCircle(0, 0, innerRadius);
  gr.endFill();
  addChild(circle);
  circle.x = circle.y = 100;
  

• Switchable graphics or in the power saving mode by default

  So, I'm having some not if funny issues with first pro. Today, while trying to edit a video, I noticed that, while trying to read anything in the timeline panel, audio would be read only, and the video in the window of reference would update only after I stopped the video. I use a Samsung series 7 times with AMD Radeon HD 8770 M graphics card and a GPU of 4000 Intell. The problem is when I go in Center of Catalyst to change settings, it is locked on the energy saving mode. I went and changed the name of the executable file for Adobe Premiere Pro CS6, which then allowed me to pass the program in high performance mode, but the same effect was still present. After a lot of research on the forums, I came across an adobe representative who suggested to try opening GPUSniffer in the directory Adobe\Adobe first Pro CS6\. and he ran. This is the screenshot I got when running it in command prompt, so my question is, does it perform a work around? Originally, when I bought this laptop 2 years ago, I have used the first pro without any problems like that. Yes, I would get occasional lag from time to time when there was a lot of effects and things to display in the timeline panel, but it was never as bad, until I had to change the hard drive due to a hard drive failure. The only thing different on this laptop is now than the hard drive itself, which has 1 TB more than the previous. It is still a samsung, and I can assure any and all other programs (which I use) that use graphics cards, use the AMD Radeon HD M 8770. First seems to be the only adobe with this problem product.

  Ridicule me. I found the solution. When I went to open a display window for which was planned on the timeline, I opened the resource monitor, instead of the program window: sequence. When I open program: sequence, the video would be read very well. Thanks for your time, will hide in the nearest corner.

• Is he closer to display the data in graphic format in the OPS?

  Hello Experts,

  I'm working on a feasibility OFA study and I have a question: is there in the OPS, any approach to represent data in graphic format, such as the schema of the Terminal?

  As far as I know, ADF supports this kind of representation and it can be incorporated into the OAF page as region. But it seems to separate server for the ADF, which is not supported in my project (assuming we have only EBS server). And the situation is similar for embedded Analytics OBIEE approach.

  Would like to share your experience or the reference of this kind of solution? Appreciate your help in advance!

  Thank you and best regards,

  Clark

  You can use graphics in the OPS.

  Visit this link: Java Based Technology Blog Sushant: 14. Graphic design in the OPS

  Sushant-

• Partial circle?

  I need to make a partial circle described. In other words, instead of the outline in a complete circle, I need for ony be about 3/4. How can I do this in Illustrator CS 5?

  kcrossly,

  You can:

  Rotate 0) if necessary.

  (1) cuts to two Anchor Points with the scissors tool,

  (2) remove the path between cuts,

  (3A) If you want to keep correctness among them, select the remaining part and Ctrl / Cmd + J to close the path, or select the pen tool and click on the two.

  3 (b) If you want the form to have a concave part with segments of straight lines to the Center, select the pen tool, click on one of the cut ends, then at the Center, then another break point.

• In the messages application, what is the blue circle on the right side of certain threads?

  
  

  After thinking about this topic, I discovered that the blue circle means that the recipient of a thread is a contact. Thanks anyway.

• Weird with the blue circle bar appeared above the tabs

  HI - last night, shortly after (not sure how long exactly) after installing Silverlight - direct on the preferred video amazon site, a strange white bar with a blue circle ringed appeared above my tabs in the browser. I do not think that it appeared directly after the installation of Silverlight, but some time later - during which I was on and off my computer - it 'appeared '...

  Here is a picture:
  http://imgur.com/WezuIoV

  And a mode of incognito, that shows something, but I do not know what...
  http://imgur.com/MlhJKbt

  I tried to disable the silverlight plug - nothing; I tried to play around with the Settings toolbar - nothing; then I restarted with modules disabled (in the Help menu) and it disappeared. But then when I restared in normal mode - it was always there... I need to reset (which probably do disappear, but I want to know what caused it)? Can I have some sort of bug? I'd be worried, virus (maybe it is excessive; I'm on a mac, but...)?

  Thanks for any help

  I fell on this particular issue so the other day. It turned out not to be any of my extensions the cause, but instead, it was a theme called "Default Mod" (which was updated to version 28 February 27). I've downgraded to version 27.1 and the blue circle went.

  EDIT: Looking at your screenshot, it seems that use you the default theme Mod as well, so it's most likely the problem.

• Starting at noon today, when I try to access my Yahoo mail, encrypted icon appears and then disappears showing that the "partially encrypted" so cannot connect.

  The "partially encrypted" icon is not orange (it is grayed out), however, it is as if the icon displayed as 'clear' and if clicked reflects the 'partially encrypted message. " I spent hours trying to determine what the problem is. The 'normal' padlock appears first (was always gray), then immediately disappears and the triangle-shaped icon is there. Any advice will be appreciated sincerely because I do not know if the site is secure or not (although it does not show the "https" in the address.

  I have used Firefox for more years that I can remember and never had a problem like this.

  And since we're on the subject of Yahoo! mail...

  Many users have had problems with the download of attachments or other issues/features to display in recent weeks. Yahoo! has moved accounts among its servers and sometimes when you use an old favorite, you are not redirected to a fully functional server.

  To work around this problem, log off from Yahoo and access your mail one of these two ways:

  • Yahoo home page: https://www.yahoo.com/
  • From the My Yahoo page: https://my.yahoo.com/
  • Generic mail forwarding: https://mail.yahoo.com/

  If you get to a working server, change your old bookmark for the new address.

• not all of the graphics appear on the screen. For example, on Google chip computer of today does not appear.

  Not all of the graphics appear on the screen. For example, on the homepage Google of today, the graphics chip does not appear. This site, http://www.conifer.jeffco.k12.co.us/conifer/html/index.html - current weather conditions should appear, but they don't.

  This problem was solved when I uninstalled and then installed the new version of JAVA. Thank you for the help you offered.

  WOW great work, I certainly would not have thought of JAVA animations used it but then I don't use "WeatherBug".

• Cannot install graphic driver on the Satellite A200-1FJ (PSAE3E)

  I wanted to update my graphic drivers. I have an intel GMA965 - x 3100 family card. When I download the drivers from the Toshiba Download Center and I try to install, I get a message that the computer meets the conditions to install this software.

  I updated the bios on my computer, but it didn't help. I am currently using the 7.14.10.1227 driver version dating back to 2007-03-06. I hope you can help me with this problem.

  Hello

  If your laptop comes with an Intel graphics chip, try to download and use the compatible graphics driver from the Intel page.

  Concerning

• Update graphics card on the P10 804

  Hello

  I want to update the graphics card on the portable Satellite P10 I think 64 MB do not suffice and be able to come it the evidence.

  How can I do this? I need to increase the dedication of the RAM to it? If so, how can I go to do that there is no option in the BIOS. I've updated the bios with the latest version (2.0 for PSP10E-XXXXXX model number) and the option is still not available.
  Is the graphics card integrated into the motherboard, or can it be toggled?

  Thank you very much in advance for any help provided.

  As far as I know the graphics card is a part of the motherboard and can not be changed separately.

• Is it possible to update the graphics card in the Satellite A200-195

  Is it posible to upgrade this card for me to play the game of MSTS?

  Usually it of not possible to update the graphics cards installed in notebooks!
  Laptop technology is simply different!
  The graphics card is attached to the motherboard and it of not possible to remove it in a simple way.

  I have always recommended to use the computer to play the game!
  If you need the computer for hardcore games you should buy a desktop computer.
  Why? Because the latest games need for most fastest graphics card and the desktop PC can be upgraded much easily as a laptop.

  But finally it of your choice what you use ;)

  Best regards