Lost partition

Similar Questions

• How to recover lost partition

  I had a configuration of RAID 5 array on LSI SAS 9260 card for data storage and a SATA drive for my operating system partition. I had a problem with WIndows 7 so I'm a new SATA drive and tried to run HP Restore Plus to install Windows 7 on the new SATA drive. Problem is that HP Restore more installed Windows 7 on my RAID 5 array, making me lose my data. I tried to retrieve lost partition (or at least the data on that partition) by using Active @ Partition Recovery and Minitool Partition Recovery, but I can't seem to find the partition. I am a novice when it comes to RAID, so I don't know if I'm missing something that would allow me to recover my data on my RAID Array. The table is installed on the LSI 9260 RAID card. Does anyone have experience with the recovery of data on a lost RAID partition?

  This widget could not be displayed.

• Bootloader unlocked, lost partition TA and DRM keys, Sony can fix?

  Hey,.

  Unlocked the bootloader and installed CM. As a result, I lost my DRM keys and the partition of TA. While CM works very well, I would like to get my phone to the State wherever he was when he came out of the factory. I know that it's out of warranty, but does anyone know if Sony can solve this, and what it would cost me?

  Thanks in advance!

  The question was from Sony can fix it and the answer is not however if you want in stock with DRM keys then this would require a new motherboard

• disk management errors and lost partitions

  I have reimagee a older laptop that has a 500 GB drive. In the process, I have partitioned the hard drive in three volumes: a drive T: and V: each with 100 GB and C: got balance. A day or two later, I noticed T: and V: mysteriously disappeared. Fortunately, I didn't put anything in them again, there was no loss of data. However, it seems that I have lost access to disk space. Disk management show up with this:

  

  All traces of T: and V: disappeared. The c: volume 226GB poster (including 148GB is free)... which is all what I think after I had partitioned the disk. But then underneath, the entry to disk 0 C: Watch is affected 465 GB... it is unclear where the balance of 35 GB went. If I try to reduce the volume, it presents me with the total available size 476938MB and shrink space 151834 MB. If I try to further reduce 1 MB, it fails with the error "Virtual Disk Manager: the parameter is incorrect."

  Now that I'm in this State, is it possible to recover without start from scratch?

  Use the free Partition Wizard boot CD to shrink C by as much as you like.

  Assistant Creation of partition resize Partition - video help.

  Create and format partitions of data desired logic.

  Create partition Wizard Partition - video help

• Lost partition recovery from Windows - Satellite L850-B757

  Hello

  I'm really grateful if you can provide me with the Windows license for my laptop from the windows recovery partition has been formatted by mistake

  Here are the specs of the laptop

  Satellite L850-B757
  Part number: PSKG8V-05M002AR

  Thank you for your support

  Anas Shamasneh

  Essential means of recovery can be ordered here:
  http://backupmedia.Toshiba.EU/

• Satellite L655-1DV - lost partition after the fresh install of Win 7

  Hello

  I have a Toshiba Satellite L 655 - 1DV and yesterday I installed windows 7-32 bit and all the drivers (clear).
  My problem is that after installing my partition (the one with the gbs much) was not recognized in windows.

  Management of the computer, it says I have 450 GB
  https://DL.dropboxusercontent.com/u/100247419/6655554.jpg

  but I have only 31 GB
  https://DL.dropboxusercontent.com/u/100247419/ttttt.jpg.

  How can I solve this problem?
  Thank you in advance.

  Hello

  How did you install Windows 7 on HARD drive?
  Format you the HARD disk during the installation process?

  Disk Management displays only a single partition. Which is really strange because even if the HARD disk should be formatted, you should get at least two partitions (a small partition for restore Win 7 files) and a larger system partition C

  I think you should try to change the size of partitions in disk management C.
  Right click on the partition and decrease the size of the partition. Then you could create a new partition and could mark it is active.

  It would be very interesting to know how the partition is displayed in Windows Explorer.

• Disk space and lost partition boot camp Windows 10 El Capitan

  Was trying to install windows 10 for the first time and I am unable to locate the Boot Camp partition for the installation of windows after restart alt + in windows installer.

  Disk utility also shows missing 50 GB partition.

  Here are the:

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  dLast login: Fri Mar 18 18:08:26 on console

  WiFi-131-179-43-25: ~ list of Austin$ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 251,0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 250.1 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650,1 MB HD

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD GB + 199.0 disk1

  Logical volume on disk0s2

  9B55AED4-119C-44D3-90CC-735356BFD6C5

  Unlocked encrypted

  / dev/disk3 (disk image):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_partition_scheme disk3 + 18,1 MB

  1: Apple_partition_map disk3s1 32.3 KB

  2: Apple_HFS Flash Player disk3s2 18.1 MB

  WiFi-131-179-43-25: ~ list of Austin cs $ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group 822D4439-B5F0-492F-927E-479F175CCDD8

  =========================================================

  Name: Macintosh HD

  Status: online

  Dimensions: 250140319744 B (250,1 GB)

  Free space: 50788065280 B (50.8 GB)

  |

  +-Physical volume BA074CDF-10E2-41F3-BCF1-1500780CE658

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 250140319744 B (250,1 GB)

  |

  +--> Logical volume family 94ABCFD9-91C2-4542-A81C-9954CA69F1CC

  ----------------------------------------------------------

  Type of encryption: AES - XTS

  Encryption status: unlocked

  The conversion status: complete

  High level queries: secure

  |                        Password required

  |                        Accepts new users

  |                        A visible users

  |                        At the Volume key

  |

  +--> Logical volume 9B55AED4-119C-44D3-90CC-735356BFD6C5

  ---------------------------------------------------

  Disc: disk1

  Status: online

  Size (Total): 198999932928 B (199,0 GB)

  Reversible: Yes (unlock and decryption required)

  Put the situation: Restart required

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  WiFi-131-179-43-25: ~ Austin$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 251000193024; SectorSize = 512; blocks = 490234752

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 490234751

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 488555312 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  488964952 1269760 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  490234712 7

  490234719 32 table dry GPT

  490234751 1 dry GPT header

  WiFi-131-179-43-25: ~ Austin$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 30515/255/63 [490234752 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-490234751] < unknown ID >

  02:00 0 0 0-0 0 0 [0-0] unused

  03:00 0 0 0-0 0 0 [0-0] unused

  04:00 0 0 0-0 0 0 [0-0] unused

  WiFi-131-179-43-25: ~ Austin$

  It is your free space.

  Free space: 50788065280 B (50.8 GB)

  You will have to perform first aid on the drive to get it back.

• Satellite A200-1VM: installed XP on Vista Boot Manager 2 but lost partition

  I own a 1VM A200 and I install Win XP SP2.
  After doing HARD drive into two partitions. XP is installed in different partision.

  I use nLite to add SATA drivers to start the cd. Now XP is fine, but whenever I start, I don't have the possibility to decide what system I want; Vista or XP.
  It starts only XP. Vista still exist on the first partition.

  What can I do to retrieve this option?

  Hello

  Check out this interesting page
  http://apcmag.com/how_to_dual_boot_vista_and_xp_with_vista_installed _first__the_stepbystep_guide.htm

  Good bye

• Bad generation of DDL for indexes primary key partitioned - lost partitions

  Hello
  
  In our design of the database, we want to divide some tables and their indexes. The partition type is hash indexes must be local, also divided No problem affecting storage of the table partitions. Also no aucun probleme problem with the index partitions, not included the primary key.
  
  Our problem appears in the generation of DDL: partitions of tables and indexes are generated fine except the primary partitions it shows key - phrase-'alter table' primary key as if it was not partitioned.
  
  Apparently indexes primary keys must be generated as the other indices, is it not?
  
  Thanks in advance,
  
  Bernat Fabregat
  
  Published by: Berni 11/29/2010 12:37

  Hello Bernat,

  for local partitioning, you need to create indexes separated on column PK (if you do not already). Set partitioning for this index, and then in the dialog box for the primary key in the physical model:
  (1) in the 'Général' tab, clause "with the help of the index' - select 'by the name of the index.
  (2) in tab 'using Index' - 'Existing Index' drop-down list box - select defined index.

  Global partitioning can be created directly on the primary key in the physical model.

  Philippe

• El Capitan Bootcamp disk partitioning suddenly restart and lost as Partition

  Hi all

  MacBook Air 11 '' mid 2012 SSD 128 Gb

  I try to install Win 10 x 64 Enterprise,

  Free space already more than 50 GB,.

  All Driver and Win10 already created using boot camp, USB key

  When the disk partitioning Bootcamp suddenly restart the OSX (I press power button / stop)

  After when the rear I check free space of > 50 Gb for only 23 GB,.

  diskutil list result:

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 120.5 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD GB + 88.1 disk1

  Logical volume on disk0s2

  D9DF129D-6E60-4479-BC67-C9A1336F982B

  Unlocked encrypted

  GPT Fdisk

  Command (? for help): p

  Disk/dev/rdisk0: 236978176 sectors, GiB 113.0

  Logical sector size: 512 bytes

  Identifier (GUID) of disc: 8B19BAA5-8CA4-4C9C-93D0-BE5F70791625

  Partition table contains up to 128 entries

  First usable sector is 34, last usable area is 236978142

  The partitions will be aligned with the boundaries of sector 8

  Total free space is 13 areas (6.5 KiB)

  Starting number (sector) end (sector), Code name of size

  409639 40 1 200.0 of MiB EF00 EFI system partition

  2 409640 235708599 112.2 giB AF05 Macintosh HD

  3 235708600 236978135 619.9 MiB AB00 Recovery HD

  Command (? for help):

  ---------------------------------------------------------

  I try to use GPT Fdisk only show the Partition 3

  already, try using Testdisk but cannot write lost sector said "write error for Protection.

  Is there a solution to recover lost Partition?

  Please after the release of

  Cs diskutil list

• HP recovery Partition lost "Hp Touchsmart 610-1100fr"

  I lost partition ecovery can I do to restore it?

  I tried to reinstall my computer with HP recovery to file factory, but an error is 1% and the recovery partition is lost so I want back what can I do now, I would if I could get it back with the help

  When I bought my HP touchsmart 610-1100fr so I did a back up of the recovery with 'Nero Backitup' partition

  but whenever I have to restore the partition, that seems not function all I get is a black screen, then he told me BOOTMNGR is missing and the F11 key no longer works

  * PS: I live in Tunisia and I can't order the recovery DVD

  Hello

  If you place your order of recovery disks is not possible, here's another solution, you can try.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( must be the same version originally supplied with your PC - IE probably Windows 7 Home Premium 64-bit ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• Lost to a data partition drive letter. Restored by using diskpart

  Original title: lost Partition... Help, please...!

  Initially, my hard drive space of 320 GB, with that one drive than C: and another drive is D: that is recovery drive. I have vista home premium 32 bit OS.

  I wanted to make a partition and so I shrunk C: drive by going right on my computer - manage - disk management - selected the C: drive and retractable... He gave me the new disc called F: with 66,93 GB of space... I moved some data in the F: drive. He has worked for two days, but now I can't see drive F: in my computer, but we see here in disk management with the allocated space of 66,93 GB... It does not drive letter show he... It's in the blue bar. and I was unable to open it, or view the properties.

  It prompted an error message: "operation failed to complete because the disk management console view is not updated...» »

  Is there anyway that I can open it? or other means to recover the files? My personal data are there I want to come back...

  Help, please.! I m desperate... I really need the files...

  Hi Roland Bhatt,.

  Thank you for visiting Microsoft Answers.

  Try to use diskpart to assign a drive letter to the drive.

  1. on the start Orb > type diskpart.

  2 - Click on diskpart in the above results > click Run as administrator.

  3. after diskpart loads type list volume, press on enter.

  You should notice that you can see your partition you use for your data, it should not not have a drive letter assigned to it.

  4. type select volume 6 (replace 6 with the number of the volume assigned to the partition in question).

  5. type assign letter Z (replace Z with the letter you want to assign).

  When you look in the computer, you should be able to see your score.

  Reference:

  Change, add, or remove a drive letter

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Bootcamp deleted missing partition, but can not recover the partition space

  Tried to install 10 Windows via Bootcamp on my Mac. First, I formatted the bootcamp partition. Then I got the following message: could not create a new partition or locate an existing one. For more information, see the Setup logs files.

  

  I tried five times with Bootcamp installed Windows 10. Then I advice to delete the partition and create a new. So I did. Still did not work. When I rebooted my mac, 50 GB missing as you can see here:

  

  I tried to restore the partition, but there is no possibility to do so, as you can see here:

  

  I read so many posts that I don't know what to do anymore. I don't mind factory reset my macbook, but it will restore my lost partition as I probably only erase the 450 GB instead of the 500 GB SSD?

  I read in several messages (this one in general: Bootcamp Partition missing during startup) that this information might be required, so I added from the outset:

  diskutil list:

  

  Cs diskutil list:

  

  sudo TPG - vv - r see the/dev/disk0:

  

  sudo fdisk/dev/disk0:

  

  
  

  I hope someone can help me restore my 50 GB, I lost. Even once, I do not fear factory reset my macbook if that's the best way to solve this problem!
  

  Can you use doesn't have windows via bootcamp 8.1 installation as reference to reclaim your disk space?

• error 0xC0000225, recovery partition does not start

  Hello

  I have a HP dv7 with Windows 7 Home premium 64-bit.

  A few months ago, I did a factory restore, the recovery partition start (I have no recovery disks). After that, I thought to divide my C: partition where Windows is installed, and I did it with Windows disk management.

  So my new scores were: C: D: with recovery, OS, E: HP_Tools and g.: the new partition.

  A few days ago the sistem ran very hard, so I thought I do another factory restore from the recovery partition. When I rebooted and you press F11, I got the "0xc0000225 error".

  I have a Windows 7 Home Premium 64-bit bootable drive and I tried Startup Repair tool and other repairs of sistem, checks HDD, but everything seems to be ok.

  I reinstalled the operating system, from the disk bootable on C: (OS starts and works well) and let the other partitions as they were... but it seems that the recovery partition still does not start if I can do a restore from the factory with all the drivers and utilities, as they were at the beginning.

  Any ideas on how I can do?

  Thank you!

  It seemed that it there was not much I could do about this problem. My disk is dynamic, there is no Recovery Manager from the Start Menu, there has not been any creation of HP with HP folder recovery support. I managed somehow to make a repair disk, I tried it but no results, the error kept popping out every time.

  I inserted the Windows 7 disc to try to delete all partitions, including the recovery and HP-tools and do a Windows Installer Cleanup, but the Format, New and Delete buttons are inactive.

  I did some scans disk and memory tests, everything was ok... I started with a disc of Hiren and accesed the HARD drive with a program based on linux and so I managed to delete the partitions.

  After I installed a new copy of Windows 7 to work with my SN and everything was ok. Unfortunately I lost partitions recovery and HP-tools, but at least it works well again.

  Thanks for your all your support.

• Partition Windows 10 disappeared after the installation of El Capitan

  @Loner T - seems you have helped others on this question and hope you can help me through it too.  I have a MBP early in 2013 with a 500 GB SSD.  I allowed the upgrade to El Capitan, and like others, this is the boot camp partition disappear.   Holding the option key pressed when starting displays only the ability to boot into OS X.  Here's what I've done so far:

  -SIP is disabled.  Confirmed after restarting normally by typing csrutil status

  -Tried to do the other bootable partition using your instructions on

  -fdisk/dev/disk0-e

  -Pei

  -setpid 4

  -07

  -Pavilion 4

  -Pei

  -w

  -y

  After resigning, I restarted and press option.  Windows now appears when I press and hold option, but when selecting it I get the error "Missing Operating System".

  Here is the result of all other orders:

  diskutil list gives:

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 300.0 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database 101,0 GB disk0s4

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD GB + 299,6 disk1

  Logical volume on disk0s2

  DAED883D-1E3E-48A7-A986-A2C2E5483BE7

  Unencrypted

  CS-diskutil list displays

  

  TPG - vv - r see the/dev/disk0 poster:

  

  sudo fdisk/dev/disk0 gives:

  
  

  
  

  I think all this means I have a lost partition as you described to others.  I downloaded Testdisk and gdisk.  Output of TestDisk:

  

  Run a quick scan on drive Test and see these unrecoverable partitions (stupid question this mean that they are lost for good or they are good and that they need not be recovered?) 。

  

  Prosecutor:

  

  Product selection P here:

  

  These are the values that I can use in steps 7 and 8 in this post?

  
  

  Step 7-587618304

  Step 8- + 388564992

  In the first series of markets Gdisk. The second set of rebuild MBR is the same for a standard installation of BC.