Graphics endangered

Similar Questions

• Text and missing graphics

  Hey all,.
  
  I hope you can help me, because my client has a big meeting next week and I am still having problems tracking down what the problem is here. I tested my site flash in Firefox and IE, and also look at a-okay. I also had several people I know view the site from their computers and everything goes well for them, too. However, both my client AND the people they introduce you to trouble to view the site. He lack the graphics and text on two different pages and I'm pulling out my hair as to why.
  
  I had my client to upgrade their flash player to the latest version and make sure that they also have the latest version of the web browser they use (they tried both IE 6 and Firefox 1.5). Still no improvement.
  
  To give you an idea of what they see, I made a web page with photos of what I see vs what they see. You can see here:
  
  http://www.FatCow.reallivesports.com/problems.html
  
  I don't know what to do, or if someone can tell me whatever it is by looking at these images.
  
  I am using Flash 8 Professional and release of Flash 8 files, I use the FLVPlayback component in the site.
  
  If you would like more information to help, please let me know what you need and I'll try and give it. I'm really against the wall here.
  
  Ed

  Hey all,.

  I finally had some success and the client can now visit the Web site, as I see it. Seems like it was a problem of version of Flash Player. They swore to me upwards and downwards that they got the latest version of what I told them to enter... they do not have. I got on the phone with the customer and walked through uninstall completely their Flash Player and then install the latest version... voila... everything works now. Apparently, they were viewing the site with a player version 7. The site requires version 8, I use some of the features that is supported only by 8. Just to be sure that someone else can't or never, I revamped my flash player/internet browser detection code and now everything is fine. If they do not have at least version 8.0.0.0, they are redirected to download the latest player.

  The thing I don't understand, however, is why were the GRAPHICS endangered? It's pages where I was not even using the components in Flash 8 only, but the graphics have been problems. Weird.

  Problem solved. Thanks to everyone who gave a helping hand. I greatly appreciate it.

  Ed

• Several interfaces (multiple windows, do not know how this word)

  I am trying to program a VI where it'll be able to switch the interface based on what the user selects from a drop down list (for example, it'll be all loan measure blood pressure, everything says the tension, then I pull the drop-down list and select current and any change to the news and graphics endangered and which appears to be necessary for the different interface).

  I know it's simple, no doubt, but I'm new.

  Thank you.

  bobholmgren wrote:

  It seems odd to me that labview does not support a simplified method of it.

  Seems pretty simple to me.  Open reference, Insert into secondary, VI execution.  You can select any vi, insert or remove secondary.  The only thing that could be more simple would be the Sub - VI runs automatically when it is introduced in secondary schools.  You will save a step.  But this step allows you to set wait until fact and Auto have reference.  I like it like that.

• AS3, PrintJob, graphic/logo in the process of disappearance on multipage print

  I print a report of several pages in a single Movieclip (MC). The MC parent has a minimum of 6 dyanmically created pages.

  What I do, it is looping through a table of data and create multiple pages of a MC model that I have in my library and I get through it is LIKE link. I loop through the data on each page is added to the parent MC. They are stacked vertically. Each page is 720px high so page 1 starts at 0, pages 2 begins to 720, etc..

  Once the report is created I used Printjob to print the MC.

  This is the loop to print the report.  I use a rectangle area defined to create each page of the MC report. I loop through the pages that is the location of the Rectangle move accordingly.

  function doPrintJob(tmpMC:MovieClip):void {}

  var yStart:Number = new Number (0);

  var printerror:Boolean = false;

  var my_pj:PrintJob = new PrintJob();

  If {(my_pj.start ())}

  for (var k: int = 0; k < pageCnt; k ++) {}

  yStart = (k * 720);

  try {my_pj.addPage (tmpMC, new Rectangle (0, yStart, 540, 720)) ;} catch(e:Error) {}}

  printerror = true;

  trace ("# ERROR SPOOLING DOCUMENT...");

  }

  }

  If (! printerror) {my_pj.send () ;}

  }

  }

  The print loop works ok, but what is happening, it is a graphic logo which is in the upper right of the MC model gets dropped after the 1st page. I have a logo on page 1, but not of logos on the rest of the pages.

  I've been tweaking the placement there of each page in the report and it seems to me that if a page is created, but the location there is off by a pixel or 2 that the chart will be truncated by a pixel or 2 but not rather is removed purely and simply to the page.

  It's really frustrating me because I tweaked my code several times to make sure that each page is correctly and that the printjob rectangle lies correctly but I still end up losing the logo.

  Anyone had a similar experience of graphics of a PrintJob movieclip endangered?

  Thanks in advance for your answers.

  Zak

  I finally found the solution. Ensuring that the movieclip with the print data has been added to the fixed step graphics disappearing printing Movieclip. Because I use the movieclip for something else that printing does not have to add it to the stage, he lived just in memory.

  Until I called the print function which is in my 1st post I did this and moved the behind the scenes clip:

  this.addChild (pdf_mc);

  pdf_mc.x = 2000;

  pdf_mc.y = 0

• Asynchronous graphics update still haven't works with v4.0.1?

  Hello
  
  my admin deployed the 4.0.1 patch last week, but my graphic asynchronous update did not always works (missing table)...
  
  Here's how I implemented it:
  
  In the source region of the map, after #CHART_REFRESH #:
  

  <script type="text/javascript">
  function maj_diagramme(){
  var chartName = '#CHART_NAME#';
  chartName = chartName.substring(1);
  apex_RefreshChart(&APP_PAGE_ID., chartName, 'en-us');
  }
  </script>

  In my Javascript/AJAX (onclick on a link) function:
  

  function details_operation(id_op) { 
       var get = new htmldb_Get(null,$x('pFlowId').value,'APPLICATION_PROCESS=Afficher_details_operation',0);
       get.add('OPERATION_DETAILS_TEMP',id_op);
       gReturn = get.get('XML');
       if(gReturn) {
            [...]
               else
            html_GetElement('P0_SQL_ERROR').value = 'Erreur';
       get = null; 
       maj_diagramme();
  }

  I forgot something?
  
  Thank you.
  
  Yann.

  Hi Yann,

  Your chart is always endangered is because you reference the graphic Flash 3 asynchronous function "apex_RefreshChart" in the source of your region. For the graphics of Flash 5, the function 'apex_RefreshFlashChart' is used for the asynchronous update of charts and works with the APEX of the 4.0.1 patch version. The other funtion "apex_RefreshChart" applies to the previous version of Flash graphics. Once you reference the new function, you'll be back in business.

  Kind regards
  Hilary

• More high graphics card Possible for early 2009 Mac Pro

  As the title suggests, I have an early 2009 Mac Pro with 12 GB of RAM.

  I want to update my graphics card to something better and I have no idea of what I put in the card. Ideally, I would like to put the last possible graphics card that is compatible for this.

  I don't know what I would look for PCI or PCI - e and what diet I would look for that would support such a computer "arcane".

  Any advice would be greatly appreciated!

  Best wishes

  Sergio

  the 2009 mac 4.1 pro can be upgraded to a number of current spare cards from Nvidia and AMD, but in many cases the cards require custom flashing of the Distributor and custom drivers. You need to buy a card with a distributor of mac because versions "Windows" of these cards will not work out of the box and OS X will not support without 3rd party drivers. This procedure is not recommended by apple that would rather you buy a new mac pro and again I want to say something for $5K, which offers the latest GPU is already 3 years old.

  research on the Web "Mac Pro 4.1 GPU" for more details.

• Intel graphics drivers

  Then I looked around my graphic driver updates and I don't really know where to go.

  The Intel Web site has NONE of the Mac (proof https://downloadcenter.intel.com/product/80939/Graphics-Drivers) compatible graphics drivers, and is the Intel Windows drivers update utility only.

  First question; If the Mac comes with so many Intel drivers, why does it seem like Intel does not give a shit about us?
  Second question; How to upgrade my drivers?

  Are equipped with all the necessary drivers for the graphics units Intel Mac Minis running OSX / integral with the OSX provided by Apple. No additional drivers/updates are available except an OSX update or update OSX

• Graphics problems in macOS Sierra on Macbook Pro

  I have a 13 "mid-2016 Macbook Pro (model MacbookPro 7.1 - 2.66 GHz/8 GB RAM) I've recently upgraded to Sierra. However, I noticed a slight increase in glitches since the upgrade - serious glitches. For example, the animation for arise Applications appears as two images, the majority of applications (including integrated) sparkle and on top of that, applications like Microsoft Remote Desktop and Parallels Pro 12 do not work right due to graphic problems (MS RD comes constantly creates an empty black window while in the analogies I was forced to power off the virtual machine dirty because all the options of the application itself that uses OS x) interface were flickering at which makes them unselectable).

  In fact, the graphics flickering and stuttering throughout what using Mac OS are quite widespread. Open a new window in Chrome, same thing. Same thing with Safari. Or iTunes.

  He got better with each subsequent reboot, but it is still pretty bad.

  Anyone else having this problem or have a resolution for this?

  He got better with each subsequent reboot, but it is still pretty bad.

  Keep rebooting until the problem is gone.

• Graphics card for Mac Pro 3.1 update

  Hello

  I recently bought a Mac Pro 3.1 running El Capitan and desperately need a graphics card update.

  Looked at a Nvidea GE Force GTX 980 and found one on ebay. Spec as follows:

  NVIDIA GeForce GTX980 graphics controller

  Tech stuff:

  Plug motor GTX 980:

  2048CUDA carrots

  1126Base clock (MHz)

  1216Boost clock (MHz)

  144Texture fill rate (GigaTexels per second)

  Memory card GTX 980:

  7.0 clock GbpsMemory

  GBStandard 4 memory Config

  Interface GDDR5Memory

  256 - bitMemory Interface width

  224

  Display support:

  5120x3200Maximum digital resolution *.

  Resolution VGA 2048x1536Maximum

  Dual Link DVI - I, HDMI, 3 Standard display connectors x DisplayPort 1.2

  4 displaysMulti Monitor

  YesHDCP

  InternalAudio input HDMI

  Dimensions 980 GTX graphics card:

  4.376 inchesHeight

  inchesLength 10.5

  Double-widthWidth

  Couple of questions...

  1. I asked the seller if is compatible with Mac (he did not know the answer). They are compatible for both mac/pc or is there a version for each? It will work in a mac pro 3.1?

  2. do I need to provide a source of additional power for this or already installed cables will suffice?

  Thank you very much

  Yes it will work in a 3.1 based on:

  http://www.macvidcards.com/store/P42/Nvidia_GTX_980_4_GB.html

  You must 10.10.5 or later version.

  You don't need additional power but yoo must Nvidia drivers

  http://www.macvidcards.com/drivers.html

  If you do not have a card that has the firmware flashed for a Mac you will not see a splash screen, you can't use special startups like recovery, startup key Option since nothing appears on the display

  This place with flash a card PC for a Mac for $180

  http://www.macvidcards.com/store/P81/Nvidia_Flashing_Services.html

  You need to install the disks required before exchanging cards. If the existing card does not require the use of one of the connectors on the logic voard yo can likl; EU uhave two installed maps

• View seeks to create graphic animations in the videos, the FCPX is capable?

  Hello useful community! A two-part question.

  I'm just getting started on the video production and have some needs in mind. I hope you can let me know if FCPX can do that hopefully, if there is an obvious solution, I am missing, or some of you approach use.

  I'll be doing a few videos of interview style and will have several camera angles, with that I need to work. So if I understand correctly to work with iMovie, I'll have a main video timeline and then 'cut' in and out secondary structures for the other angles. But I must have a logo sitting in the corner as well. Is there still enough chronologies to cut in different camera angles while having a timeline showing the stationary chart? iMovie does not you have only your primary and another calendar cut in and out, but I hope that FCPX has the ability to overlay 2 more than at a time? Or maybe I'm going about this the wrong way need?

  The second part is linked, I want to be the logo/text animation because it is (as a brief introduction). Not throughout the entire video or something extremely complex, but to animate shapes and text sliding in such that the name of the speaker, the name of show graphics, etc... And I'm hoping to create my own custom animations, not the familiar "motions of text" located in iMovie. I feel like the examples I found online that all look like they have animations the same model and I hope for much more creative in this area occasionally, if that makes sense. In its most simple example I guess, the design and animation capabilities/techniques you can do in Keynote for graphics/text that can be market timed, fades, slides, etc.

  Is FCPX the right program to incorporate more complex forms of text animations as well? Or is it the work of another software?

  I hope that makes sense. Any help is appreciated, thanks!

  Mark

  TYou can have an unlimited number of video layers.

  Yes, you can make custom animations. For more complex animations, you use Motion.

• Graphic of alias created for the folder is not transferred in the doc.  Everything in batteries.

  Graphic of alias created for the folder is not transferred in the doc.  Everything in batteries.  Done in PS and saved as a JPEG.  I did a lot.  not sure why it does not work now.  These are records that have elements in them and it only shows the stacks of items in the folder in the doc.

  ideas?

  control, click the icon in the Dock and have her take > folder

• iMac 27 2010 graphics card / ram problem

  Hello - read through the form and try to isolate the problem.  A week ago my end 2010 iMac 27 I7, 12 GB of Crucial Ram, OSX Yosemite went screwy - icons went fuzzy, and the system has just stopped responding. I tried not just pull the plug, but the computer was out of order, so I had to pull the plug. Please keep in mind it was a day hot here in New York and I've come for a quick moment to remove some files and did not close the windows a turn on the AC, so they probably overheated system or so I guess

  Anyway, after a few hours and I came back home and turned back on the iMac. Immediately, I noticed some pale red bans on the screen. The system has been restarted slowly and then it stop at halfway however and just go to the gray screen. I did a reboot, re-installed the operating system made the system check, but the failure of operating system to kick when I do a normal restart, and I am only able to operate the computer in Mode safe.

  Is there a way I can understand if the RAM is the question, the graphics card, or if it's the OS? A faulty graphics card will prevent the system from starting normally? I have the same question when I open it on safe mode?

  I'm trying to see if there is a way to save the iMac and get more use out of it, but at the same time a few years if it's gong to fix an expensive that I can't do on my own, so maybe its not worth what's now 5-6yrld of fixing iMac little matter how the computer cost me back in 2010.

  Thanks for your help and sorry if this question has been answered countless times before.

  JB

  Most likely graphics card problem...

  Note:

  One way to test is to boot from the HD, (now shift key at startup), run utility disk in Applications > utilities, then highlight your reader, click on repair permissions, test for problem in Mode safe...

  PS. secure boot can remain on the gray radian for a long time, let go, he's trying to repair the hard drive & trash/rebuild the cache files

  Reboot, try again.

  If it does so only in ordinary chest, there could be a problem material such as Video card, (the Quartz is disabled in Safe Mode), or airport, some USB or Firewire devices, or the module in part 3, Check System Preferences > accounts (users and groups in later versions of OS x) > login items window to see if she or something relevant is listed. Or a stray process eating RAM.

• Please bring back the view of the graphical dashboard in ios10 health app!

  in iOS 9, very useful functionality of the application of health was the graphical view in the dashboard. It is now gone, or the less hidden to be not not visible with a little wink. Apple, bring it back please!

  Click today at the bottom.

• Graphic problem of mission control

  Hi, I have an early 2013 MacBook Pro retina runs El Capitan 10.11.6

  Launch of Mission Control, there is a graphic problem: miniature Office are all gray, as you can see in the screenshot.

  I already tried to quit smoking Dock in activity monitor and running "killall Dock" in the Terminal. Restart the system, the problem persists.

  Any ideas?

  

  Hello GalaxyWorker,

  Thank you for using communities of Apple Support. It is my understanding that when you use the Mission control the thumbnails are gray. I often use in Mission control, so I know not being able to see the thumbnail of the available screens can be useful. I'm happy to help you to get this resolved with you.

  You did a great job trying to fix this problem yourself. First, I recommend that you test the problem in safe mode. Boot in safe mode allows your Mac perform certain controls, delete the cache and prevent the opening and start-up items to open automatically. Follow the steps below to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any key during startup

  Try safe mode if your Mac does not end commissioning

  If the problem does not occur in safe mode, but returns when you restart normally, try to disable the login items using the link below.
  OS X El Capitan: If you think you have incompatible connection points

  If the problem occurred then in safe mode, it is possible the user settings or files are the cause. In this case, please try the issue in a new user by following the instructions in the following link.
  How to test a question in another account on your Mac.

  Have a fantastic day!

• Help on graphics card memory and upgrade for iMac

  Hello!

  I need advice on a good new graphics card for iMac 27 inch end 2012. My work is mainly in animation, Visual effects and game development soon, so I need an additional card to increase my speed.

  Currently, I have a NVIDIA GeForce GTX 680MX 2048 MB card. Do you think I should stick to a similar card? Is there something new that will offer me better performance at an affordable cost?

  I don't have much money to spend, but I can certainly use additional graphics now.

  I have also 2 remaining memory locations that accepts DDR3 1600 MHz memory module, but it seems that this module is no longer available. If I had to choose between a graphics card and RAM, which should I go with?

  Finally, can I install these myself? I don't have any Apple Store around me and I do not trust the computer guys in my area.

  First of all, the iMacs are notoriously difficult to make something with except add RAM. Here is a good site where you can get some info on the dismantling, etc.:

  https://www.iFixit.com/

  Usually, graphics cards should be replaced with the same model/type of work (if any) - see above site for this kind of info. I'm quite sure that you cannot add just one - iMac is not designed for it.

  Regarding the RAM, just check out OWC for necessary RAM:

  https://eShop.MacSales.com/shop/memory/iMac/2012_27/DDR3L

  Check that your model is listed. I don't know where you would have been told that the RAM is no longer available (FWIW, Apple does not sell RAM and uses of third party RAM in the new Macs).

  I'd go with the RAM - how many do you have now? Adding RAM is easy.