Gray instead of black in PDF

Similar Questions

• HP Officejet 6000 Print gray instead of black

  Hello

  My HP Officejet 6000 works well for about a year until today, where he began to print light gray instead of black.

  My officejet is attached via USB directly to my PC, I'm under Ubuntu 12.04 with gnome shell. Used to work out of the area to print. I just install HPLIP Toolbox to see if I can fix anything, but that was no help. I exchanged the inktank black for a new, but that did not help either one. The gray looks perfect gray and not a faded defective, black dryness. I tried to change the output of color mode in the settings of the printer to the only black than gray, and the printer does not print the necessary ink at all. Is this a software problem? Or printer hardware problem? I tried printing from my laptop and had the same problem.

  Any help would be appreciated.

  Problem solved. I got my printer to my friend who has a Windows PC and a test print looked fine. I thought it must be a Linux question then. I have connected my printer to my PC Ubuntu again, and for the hell of it, I tried to print a test page and go figure, it worked. Maybe unplug the printer helped solve the problem? BTW, when I meet my problem, the printer was not actually printing gray instead of black by mixing the inktanks color. I discovered that she did not use the black tank at all. I'm glad that everything works again without having to really fix anything. So if anyone else has this problem, try disconnecting the printer, and then try again. That could be the solution. Turn off the PC one on or the printer doesn't help.

• My Control Center won't let me not "remember passwords for Sites" option is gray in color instead of black and won't let me click on it?

  My Control Center won't let me not "remember passwords for Sites" option is gray in color instead of black and won't let me click on it?

  It also won't let me select "Exceptions" or "Change master password"

  Thank you

  You can check that you are not Firefox running in permanent private browsing mode (don't remember history).

  • https://support.Mozilla.org/KB/private+browsing
  • Firefox > Preferences > privacy > Firefox will be: "use the custom settings for history".
  • : Uncheck the [] "always use the private browsing mode.

• Printer prints blue instead of black

  I have a HP 6840, has worked well and suddenly started printing blue instead of black.  Prints all other colors, but not black.  On the test page, everything is blue, except two small squares at the top that are dark gray.

  Any thoughts?

  The test page actually uses a combination of color to print what appears as black text.  It seems that you will need a black cartridge.

  It is not uncommon for the third-party products to have poor quality, see the study here for more details.

• How to achieve the intense black in PDF export?

  InDesign CS5 on Snow Leopard. I have a black to display and output set accurately (not rich black). Color settings are in North America General Purpose 2. Evidence of configuration is set to Document CMYK U.S. Web Coated (SWOP) v2, so that I see on the screen as accurately as possible what it will look like when printed.

  An image of large, to most black covers my first page; This is an imported PSD. When I view the image in PhotoShop, it displays as "intense Black" - you know, Black 100% on-screen. But looking into InDesign, it appears a dull gray. It also appears a dull gray when you export to PDF or print.

  How to go to the PDF format and print in crisp, perfect, 100% black rich?

  If possible, I would like it to appear on my screen about as it will be in the PDF export and the printed page.

  Thank you!

  The preference for Rick Black, that's how it shows up only on RGB devices, monitor, or printers that support RGB.

  For an intense black for a CMYK profile, you will need to build a new black and which apply to selection in InDesign.

  The rich blacks are going to 50Cyan 100BlacK

  at 20 c, 20Y, 20 M, 100 K = 160 (20 + 20 + 20 + 100)

  40, 0, 40, 100 is 180

  where equals is the limit of the ink to the paper.

  Depending on what paper you're printing on, coated or not coated, and weight, you'd have different limits. 280 is generally good.

  For example, you might have an intense Black of C90 M90 Y0 K100 = 280

  Please contact your printer what ink should be built and what is your limit of ink.

  If you have a text hit out of the black then you probably want to keep C 50 and 100 K, because it would be easier to keep the registry text.

• My Bookmark this page does not. Gray and not black. Need of difficulty.

  I noticed that when I try to bookmark a web page on the Bookmarks tab, 'Bookmark this page' is now gray and not black. Foxfire does not allow me to bookmark a page.

  How can I get this feature restored?
  What's happened in the first place and how can I prevent this from happening again?

  Thank you

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• With the help of black ink instead of black ink cartridge Photo

  I have a HP Photosmart Premium 309 has and would like to know what are the settings that I need to change so that when you print a text document it uses black ink instead of the photo black ink.

  OR

  What settings should I change my 309 uses a black ink instead of black in photo is not serious what I print?

  See the solution here:

  http://h30434.www3.HP.com/T5/other-printing-questions/using-photo-black-instead-of-regular-black-for-general-printing/m-p/738137#M40287

• Prints blue instead of black

  I have a HP Photosmart B210, more.  My black text (and pictures) print light blue instead of black.  I replaced the cartridge twice and I always feel the same question.  I cleaned the print heads several times.

  just to repeat the solution.  Choose Printer Preferences and fast/economical printing.  Also in the grayscale option choose black ink only.

• Printer prints red instead of black

  original title: ink color

  Why is my print out RED instead of BLACK or BLUE?  I have an Epsom C88 printer and have

  never had this kind of problem before.   I changed my black cartridge and that made no difference.

  Why is my print out RED instead of BLACK or BLUE?  I have an Epsom C88 printer and have

  never had this kind of problem before.   I changed my black cartridge and that made no difference.

  You could ask the support of Epson for a definitive answer, but I saw a suggestion that this behavior can be caused by a blocked ink purge tube.  See the next page.  And this page for the cleaning solution.

• Green instead of black

  Hello, my printer (photosmart 7550), green instead of black, I tried with updated drivers and clean the cartridges but nothing is changed.

  This problem occurs with the color photo (full) and normal cartridges.

  What is the problem? Thank you

  Hi, it seems that the cartridge might be very close to empty... have you tried the following?

  Click on the printer icon in the taskbar.

• Photosmart C5380: My Photosmart C5380 printer Green instead of black

  Occationally my printer prints green instead of black.

  Sometimes it's at the beginning of a document, and sometimes it's in the middle of a document.

  I tried to change the cartridge, but have the same result.

  Best regards

  Torben Arp

  Hi @tobby37 ,

  I want to help you with this issue, black is sometimes printing in green. You have changed the cartridge and having the same results.

  I would like to do a hard reset to see if that will solve the problem.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  Try the following steps to see if it will solve the problem.

  Message "Ink cartridge problem" on the printer.

  Please do not take into account the title.

  You use genuine HP cartridges?
  What are the ink levels?

  Please let me know if you need additional assistance.

  Have a fantastic day!
  Thank you.

• Can I use photo-noir instead of black?

  Using my Photosmart Premium C410, can I adjust my settings to print on Matt paper strictly using photo black instead of black? I have almost no black/color, but have an abundance of black photo. I do not have an abundance of money, so purchase new black ink is not a good idea.

  Just so that you know, what you have to do to use your PHOTO BLACK instead of BLACK of INK to print (in reason to be perhaps more black ink) is go into the settings of your printer and set it to: impression of the main paper tray, on paper 8 x 11. Click on "print". In this way, your printer thinks it is photo printing - but really, you print on matte paper.

  So the assertion that "you need our product" is false. Another company asking for the purchase of a product not necessarily need

• How I changed the color of something? OK, so I use to be able to change the color of things, but now I have use color overlay, gradient overlay, or change the color when I first create the form, it turns into another shade of gray instead of chan

  How I changed the color of something? OK, so I use to be able to change the color of things, but now I have use color overlay, gradient overlay, or change the color when I first create the form, it turns into another shade of gray instead of change the color, I chose.

  Three things I can think of:

  Your document must be in RGB mode.

  Layer blending mode should be set to Normal

  Masks are grayscale. If you select the mask, you cannot apply a color.

  Always check your tab at the top to see if what you choose is RGB or grayscale.

  Gene

• I can't use the 'sharpness', the field is marked in gray instead of the stronger color when it is possible to use. If someone of you know why and how to fix it?

  I can't use the 'sharpness', the field is marked in gray instead of the stronger color when it is possible to use. If someone of you know why and how to fix it?

  Hi Eva,

  Could you please for the preferences of Photoshop, then tab Perfomance.

  In here please see, if the option "Use Graphics Processor" must be verified.

  These filters are largely dependent on the graphics card.

  Respect,

  Tanuj

• How to make the bottom of the video (canvas) white instead of black in PE11?

  I want to use a white background in the video world wide Web instead of black.  How I would go to this topic in PE11.

  
  Thank you

  
  Dave

  In Expert Mode, follow these steps:

  Presentation of the active panel of the project

  The project components panel allows you to preview the material source for your projects. Select the Expert mode, and then click active project.

  You can view the contents of a project using the list or grid view. Use the menu options of the control panel to switch between the views.

  The grid view displays a preview of the video that you have imported into the project. The project as

  Video of Black, or matte colors, follow these instructions:

  Create and add a black video clip

  You add black video clips to separate several films or to create breaks in a film. You can also use a black video clip for a title.

  1. click on the active project.

  2. in the project Panel, click new item from the options in the Panel and choose Black video.

  Create a color for a background matte

  You can create an item consisting of a cache full frame of solid color, which you can use as a solid base for titles or animated elements.

  Caches of bright colors can be used as temporary funding to help you see transparency more clearly while you adjust a key effect.

  1. click on the active project.

  2. in the project Panel, click new item from the options in the Panel and choose color matte.

  3. choose a color in the Adobe Color Picker dialog box, and then click OK.

  A color matte clip is placed in the components panel of project and the chronology of the expert opinion.

  Good luck and hope that helps.

  Hunt