GSS108E: time to upgrade the firmware

Similar Questions

• HP DesignJet 5500uv 42 "Q1251V: System error HP DesignJet 5500uv to upgrade the FirmWare 0f0100 0001d 06

  Hello

  After replacing a failed hard drive and firmware updagrded, I want to download media, my plotter keeps coming up with code system error and warning: "0f0100 00001d 06 on/off switch, if the problem is, contact HP support. I did several times of the power switch, it still say I can't go any further. One thing I can say that current hard drive (80 GB capacity) is a little bit larger than the broken one(40gb) and not a new brand. The used firmware is S.56.07. Another problem is that "LM print head must be reinstall" several times as well (after many trials that slightly this issue). Someone has any idea I can solve this problem or solve the problem, I spent several days on this subject, really frustrated. Thanks a lot for any input.

  Binke

  Make sure you jet direct network card has the latest version of the firmware.  Use HP download manager to upgrade the firmware of the card if necessary.  I guess that works of tracer and the error only occurs when you send a job or media profiles to the plotter.

• WRT310N - upgrade the firmware fails...

  Hello.

  I am trying to upgrade the firmware on my WRT310N v1.00.4 - CA to the latest version available on the Web site, v1.0.07 build 14. But, every time I try and update the firmware, it gets 98% done and it remains fair to 98%. I left it sitting as this night, but it never ends. I tried several times, but always, it hangs at 98%.

  Someone has any idea how to get around this?

  Thank you

  k.

  Solved.

  I was using Safari on Mac. As soon as I used Firefox on Mac, he finished without a problem.

  k.

• How much time it take the firmware upgrade procedure?

  Hello

  I ReadyNas 204 and I'm away from the SIN it free and I wanted to install the 6.5.0 version of the firmware via the admin interface... I'm not sure how much time should I take, it is already underway for 40 minutes... is this normal?

  Sorry for the dummy question!

  Thank you

  Problem is solved. Sent someone back home to check and it seemed that the NAS could not obtain an IP address after you restart. Disconnect the RJ-45 and connected back solved the problem. NAS is back online, but would it be a bug in 6.5.0 or is it just with my camera? Nothing in the newspapers that I could see... just could not obtain an IP address...

  the NAS drive is configured with a static IPv4 address and IPv6 is disabled. If that helps.

• LaseJet 2200dtn: how to upgrade the firmware of lj2200dtn?

  the update of the firmware hp2200dtn?

  I found something interesting.  With the printer came in a CD and the CD was a program of the laserjet device configuration. Since the last version of Windows at the time this printer was presented was Millennium do not know if the package runs on the current operating systems.  According to the description below it would seem this is where you can change the language of the printer.

  HP LaserJet Device Configuration
  (Windows 9 x / NT 4.0/2000/Millennium only)
  Note the printer driver settings override settings in the HP LaserJet device
  Configuration for the settings that appear in both places.
  The HP LaserJet Device Configuration manages printer default
  Parameters. (Run a custom install to install the HP LaserJet device
  Configuration.) It allows you to access the many features of the printer,
  including:
  Reports printing configuration

• I upgraded the firmware Sansa Clip & now I don't see the files I had previously in

  Hi guys, this is my problem: I have a sansa clip v2, it worked fine until yesterday, when I updated the firmware with sansa updater; the upgrade went smoothly, but now my windows xp sp3 detects the drive because it was a normal penstick/external hd and I cannot see the files I already had in it: I can still listen to their - players works as usual - but, as I don't see them, I can't delete them! I tried the "hidden and system files" in folder options, but it did not help. I think that after the upgrade of the internal structure of the file has changed a bit, now it is: sound, music, audio books, podcasts, record, WMPinfo.xml, MTABLE. SYS, RES_INFO. SYS, SYS_CONF. SYS, version.sdk. I try to put a few new files in the folder "music" and it works perfectly, they appear in the player, so the problem is only with the 'old'; in fact, I would not delete them mind these files if it is not necessary, because I have them on my hard drive).

  I hope someone can help me, thank you very much! (and please excuse my bad spelling & grammar, I'm Italian!  :-))

  1. pick up your player Sansa Clip - the physical drive you bought.

  2. activate.

  3. press the small 'home' button, the small button on the front of the item located at the top right of the Ferris wheel - it's the small button with the little house printed on it.

  4. press on the lower part of the wheel (at 06:00 position) until the screen shows the settings.

  5. press once on the right side of the wheel (at 03:00 position) to access settings options.

  6. press on the lower part of the wheel (at 06:00 position) until the display shows USB mode.

  7. press the right side of the wheel (at 03:00 position) once to enter USB mode options.

  8. tap up or down the Ferris wheel (at 12 and 06:00 positions) and select the USB setting menu is currently not checked (I think that this will be the PSG; ignore the setting "Auto", for the reasons I stated above), then select it by pressing the right side of the wheel (at 03:00 position).

  9. you have now set your video mode MTP USB drive.  Press the small home button twice to return to the regular game mode.

  And that's all.  Now when you connect your player to Clip on your computer, your files should appear on your computer.  If they don't, repeat the above, but set the USB to the MSC mode.

  I hope this helps.

  PS As I said earlier, the USB modes, the MSC mode (compared to the MTP mode) is more universal and will work on multiple computers.  If you use a video player on other computers, you can set your video player in MSC mode, to ensure that it will connect to other computers.  If this is the case and if your video player has been set to MTP mode so far, before changing the setting of mode USB mode MSC, to be able to see all files in the reader of your video on your computer, first copy the files from the drive of your music back to your computer delete them out of your video player, set the Clip Player USB Service mode weather of the Canada (see above) and then copy the files to your video player.  This ensures that you can see all the files of your video player when it is connected to your computer.

• How to upgrade the firmware on my router e4200

  Hello world. Sorry for the noob question, but I have been everywhere for this search.

  I currently have the name of the model: Linksys E4200 Firmware version: 1.0.04)is build 11 software version: 1.4.12100.0

  I am trying to upgrade to the second version, and up to date. (Version: 2.0) firmware. Links or how to do it? I tried to do it through my router settings under administration-> firmware update, but it will not refresh automatically. I need to find the real update file and update the firmware there.

  Any help would be greatly appreciated. Thanks in advance.

  Hi you won't be able to upgrade your router to Version 2.0, since this version refers to the material. E4200 has 2 versions of material. The firmware version you have is for the V1 E4200 and you already have the most recent. No need to look for any other update, since you already have it.

• Big problem after recovery try upgrading the firmware, now I have "POWER OFF".

  Hello

  Today, I tried to upgrade the Palm PLUS my new Z2 firmware, unfortunately something wrong with the PC and USB disconnected, after this I tried to bowl of Z2 SUS recovery still once and I completed the restore and update, but now I have an error!

  

  How can I solve? Pls help me! Phone has 5 days!

  
  

  It's quite strange, but sorry to say this, but you have to stop by your local Sony Xperia care

  http://www.sonymobile.com/global-en/support/contact-us/

• Can be upgraded the firmware on my Satellite Pro A120 to accept SDHC cards

  I have a Satellite Pro A120 and use the slot for SD card frequently, however, the capacity of memory cards can sometimes be restrictive, is it possible to update the firmware for SDHC cards and if so, how.

  Hello

  Unfortunately not possible since it s card reader has NO firmware and it s a stand-alone device that has nothing to do with the BIOS (firmware) of the machine.

  So, if she can't simply do not support. :/

  See you soon

• How can satellite A210-15Y - I upgrade the firmware of the DVD drive?

  Hello

  I want to update the firmware of my DVD RW. It is TO01 and I updated TO03.
  Is TSSTcorp CDDVDW TS - L632H (TO01).

  I have download the .zip on the Toshiba site and extract. I run TSL632H_TO03.exe
  and it appeared an autorun.bin file in the same directory.

  What to do with this .bin file? When I doubleclick it, a dialog box appears to show the program
  for .bin files to run. Why is this? I don't have any program to .bin files. The content
  File PDF of firmware does not say something special to update the firmware, just for
  run the .exe.

  I am running the operating system Vista Home Premium 32 - bit that came with the notebook.

  Kind regards
  Nebojsa

  Hello!

  I think that there is a problem with the file that you downloaded.

  I checked the page of European Toshiba for Satellite A210 driver download and I can't find the TO03 firmware. I downloaded the zip file and zip in this file is a readme file and another zip file which contains an exe file that you need to start only.

  Maybe you need to download the file again. I can't find a .bat file in the archive. ?:|

  Good bye

• E2500 - upgrade the Firmware 2.0 killed 5 GHz Portal

  I have improved my E2500 wifi router and since then my 5 GHz portal does not transmit.  My cell phone not noted in the beach.   Is this a known issue?  Ed S.

  Hello edspyhill09. Did you reset and reconfigure the E2500 after the update of the firmware? Also, try to access the user interface of the router and check if the SSID of the 5.0 GHz network broadcast has been disabled. To access the interface, click on this link:

  http://KB.Linksys.com/Linksys/UKP.aspx?pid=80&VW=1&articleid=3676

• How to upgrade the firmware of the display driver card GeForce 9300 M GS of IQ506? It displays error

  Simple question! I can't update the firmware of the GeForce 9300 M GS my IQ506? It shows the error message "cannot detect the hardware" during the update

  M Odded pilots of worm NVIDIA 185.85.

  1. Download driver here, double click and select Extract.
  2. download modded INF here and replace the original INF in extracted folder.
  3. install & restart.

  9300M so you this driver should work for you without any problem.

• Photosmart 6520 does not print after upgrading the firmware on the router.

  I have problems with my router and a remote technician for Verizon FIOS updated firmware, solve my problem of the internet, but now my printer is not working.  When I try to print from my macbook pro (OSX Lion 10.7.5) it is said that the printer is idle.  When I try to print from my ipod and the iphone, it is said that it prints, but then nothing happens.

  I was able to set up direct wireless to print, but I don't want to go into the settings and change networks whenever I need to print.

  I tried to turn off the router unplug the printer and turn it back on.

  I checked to make sure that the WEP code and network name are correct.

  What can I do else?

  treeBear wrote:
  

  ricksmom wrote:
  

  I appreciate really all the efforts that you and other posters are on this issue, but I feel that I will not find a solution.  Maybe a new router?

  It is a long shot. But since we are short of ideas, please try to change the configuration of the router from WEP to WPA2 and try again to establish the connection. Because WEP is very old standard, some routers may have a few inherited defects that were never resolved.

  Well... This opens a huge can of worms, it leads eventually to a solution.  I changed the security settings and when I presented to them, 'wait while we apply the settings' screen appeared and never went away.  The timer kept spinning and this went on for over an hour.  Neither the old or new passwords worked and I completely lost my internet connection.  I called Verizon and ordered a new router and said the technician on the line of my being stuck in limbo. After a few basic tests (unplug and pluggng again) she transferred me to someone in the advanced group.  To make a long story short, he traced the fault not the router, but the optical network outside my home box.  It reset, reset the router (losing the new security settings and everything else) but my internet is back, and fortunately, so is my printer.  I'll live with that until the arrival of my new router state-of-the-art.

  Thanks for the suggestion, it was a frustrating experience, it finally lead me to a printer to work! I doubt that I would come to this point another way.

• HP Color Jet CP5525: problem with upgrading the firmware on cp 5525

  Hello!

  Just upgraded my HP Color Jet CP5525 firmware "cljCP5525_fw_2305090_000453".

  It seemed very well att first, but after a print I get error message 80.00.04 'problem with jetdirect '.

  Any suggestions?

  Fixed streaming t back to factory settings. Strange solution, but I stopped Esser with it now ha ha

• How can I upgrade the firmware for USB 3.0

  I have Windows 7 Ultimate 32 bit operating system installed

  You are quite welcome.

  Your laptop is not delivered with USB 3.0.  Since your laptop does not have a PCI-express port, the USB upgrade is not possible.

  The specifications of your computer laptop are here.