Green instead of black

Similar Questions

• Photosmart C5380: My Photosmart C5380 printer Green instead of black

  Occationally my printer prints green instead of black.

  Sometimes it's at the beginning of a document, and sometimes it's in the middle of a document.

  I tried to change the cartridge, but have the same result.

  Best regards

  Torben Arp

  Hi @tobby37 ,

  I want to help you with this issue, black is sometimes printing in green. You have changed the cartridge and having the same results.

  I would like to do a hard reset to see if that will solve the problem.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  Try the following steps to see if it will solve the problem.

  Message "Ink cartridge problem" on the printer.

  Please do not take into account the title.

  You use genuine HP cartridges?
  What are the ink levels?

  Please let me know if you need additional assistance.

  Have a fantastic day!
  Thank you.

• Printer HP printing green instead of black text, it only happens in the computer printer.

  Original title: printing problems.

  I use Vista Home Premium on a Dell Inspiron 351 and I have problems with my printer, black print green fate how do I change. I use a HP Deskjet 3050 a J611 series.  The scanner and copier work in the dark, but not my computer.

  Hello

  Have you made changes on the computer before this problem?

  This type of problem usually occurs due to a change in the settings in the printer.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the fixit from Microsoft Fixit article and if that helps.

  Problems printing and printing errors:

  http://support.Microsoft.com/mats/printing_problems/

  Method 2:

  Try the steps in the following Microsoft article and check if it helps.

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  If the steps above mentioned methods, then it would be best to contact HP for assistance.

  HP support: http://www8.hp.com/us/en/support-drivers.html

  Hope the information is useful.

• My Control Center won't let me not "remember passwords for Sites" option is gray in color instead of black and won't let me click on it?

  My Control Center won't let me not "remember passwords for Sites" option is gray in color instead of black and won't let me click on it?

  It also won't let me select "Exceptions" or "Change master password"

  Thank you

  You can check that you are not Firefox running in permanent private browsing mode (don't remember history).

  • https://support.Mozilla.org/KB/private+browsing
  • Firefox > Preferences > privacy > Firefox will be: "use the custom settings for history".
  • : Uncheck the [] "always use the private browsing mode.

• With the help of black ink instead of black ink cartridge Photo

  I have a HP Photosmart Premium 309 has and would like to know what are the settings that I need to change so that when you print a text document it uses black ink instead of the photo black ink.

  OR

  What settings should I change my 309 uses a black ink instead of black in photo is not serious what I print?

  See the solution here:

  http://h30434.www3.HP.com/T5/other-printing-questions/using-photo-black-instead-of-regular-black-for-general-printing/m-p/738137#M40287

• HP Omni 120-1050xt: screen goes to red, green, blue, white, black after upgrade to Windows 10

  When the PC is idle, the screen turns red, green, blue, white, black, and every time I need to turn off the machine. He said "best driver for your device is already installed" - Intel HD Graphics. I tried to uninstall, install.

  Greetings,

  HP not support your PC when you run Win 10.

  I suggest that use the "Go Back " process win 10 ASAP.

  If this is not possible because of your graphics problems you'll have to do a restore to factory HP.

  I can help you more with this if you wish.

  If the upgrade was forced on you there are ways to stop the involuntary update.

  Let me know if you need further assistance.

  Jay

• Prints blue instead of black

  I have a HP Photosmart B210, more.  My black text (and pictures) print light blue instead of black.  I replaced the cartridge twice and I always feel the same question.  I cleaned the print heads several times.

  just to repeat the solution.  Choose Printer Preferences and fast/economical printing.  Also in the grayscale option choose black ink only.

• My iPhone 6 s suddenly sends messages text green instead of blue

  I got my iPhone 6 s two days ago and he was sending text messages normally. I recently received a strange call on my phone number (602) 734-1007, and right after that my SMS all turned to the green instead of blue. I am people texting with iPhones and I have an iPhone, then it should just be blue and gray.

  Try

  Force reboot

  http://support.Apple.com/en-us/HT201559

• Printer prints red instead of black

  original title: ink color

  Why is my print out RED instead of BLACK or BLUE?  I have an Epsom C88 printer and have

  never had this kind of problem before.   I changed my black cartridge and that made no difference.

  Why is my print out RED instead of BLACK or BLUE?  I have an Epsom C88 printer and have

  never had this kind of problem before.   I changed my black cartridge and that made no difference.

  You could ask the support of Epson for a definitive answer, but I saw a suggestion that this behavior can be caused by a blocked ink purge tube.  See the next page.  And this page for the cleaning solution.

• HP Officejet 6000 Print gray instead of black

  Hello

  My HP Officejet 6000 works well for about a year until today, where he began to print light gray instead of black.

  My officejet is attached via USB directly to my PC, I'm under Ubuntu 12.04 with gnome shell. Used to work out of the area to print. I just install HPLIP Toolbox to see if I can fix anything, but that was no help. I exchanged the inktank black for a new, but that did not help either one. The gray looks perfect gray and not a faded defective, black dryness. I tried to change the output of color mode in the settings of the printer to the only black than gray, and the printer does not print the necessary ink at all. Is this a software problem? Or printer hardware problem? I tried printing from my laptop and had the same problem.

  Any help would be appreciated.

  Problem solved. I got my printer to my friend who has a Windows PC and a test print looked fine. I thought it must be a Linux question then. I have connected my printer to my PC Ubuntu again, and for the hell of it, I tried to print a test page and go figure, it worked. Maybe unplug the printer helped solve the problem? BTW, when I meet my problem, the printer was not actually printing gray instead of black by mixing the inktanks color. I discovered that she did not use the black tank at all. I'm glad that everything works again without having to really fix anything. So if anyone else has this problem, try disconnecting the printer, and then try again. That could be the solution. Turn off the PC one on or the printer doesn't help.

• Printer prints blue instead of black

  I have a HP 6840, has worked well and suddenly started printing blue instead of black.  Prints all other colors, but not black.  On the test page, everything is blue, except two small squares at the top that are dark gray.

  Any thoughts?

  The test page actually uses a combination of color to print what appears as black text.  It seems that you will need a black cartridge.

  It is not uncommon for the third-party products to have poor quality, see the study here for more details.

• Can I use photo-noir instead of black?

  Using my Photosmart Premium C410, can I adjust my settings to print on Matt paper strictly using photo black instead of black? I have almost no black/color, but have an abundance of black photo. I do not have an abundance of money, so purchase new black ink is not a good idea.

  Just so that you know, what you have to do to use your PHOTO BLACK instead of BLACK of INK to print (in reason to be perhaps more black ink) is go into the settings of your printer and set it to: impression of the main paper tray, on paper 8 x 11. Click on "print". In this way, your printer thinks it is photo printing - but really, you print on matte paper.

  So the assertion that "you need our product" is false. Another company asking for the purchase of a product not necessarily need

• How to make the bottom of the video (canvas) white instead of black in PE11?

  I want to use a white background in the video world wide Web instead of black.  How I would go to this topic in PE11.

  
  Thank you

  
  Dave

  In Expert Mode, follow these steps:

  Presentation of the active panel of the project

  The project components panel allows you to preview the material source for your projects. Select the Expert mode, and then click active project.

  You can view the contents of a project using the list or grid view. Use the menu options of the control panel to switch between the views.

  The grid view displays a preview of the video that you have imported into the project. The project as

  Video of Black, or matte colors, follow these instructions:

  Create and add a black video clip

  You add black video clips to separate several films or to create breaks in a film. You can also use a black video clip for a title.

  1. click on the active project.

  2. in the project Panel, click new item from the options in the Panel and choose Black video.

  Create a color for a background matte

  You can create an item consisting of a cache full frame of solid color, which you can use as a solid base for titles or animated elements.

  Caches of bright colors can be used as temporary funding to help you see transparency more clearly while you adjust a key effect.

  1. click on the active project.

  2. in the project Panel, click new item from the options in the Panel and choose color matte.

  3. choose a color in the Adobe Color Picker dialog box, and then click OK.

  A color matte clip is placed in the components panel of project and the chronology of the expert opinion.

  Good luck and hope that helps.

  Hunt

• Edges of poster in white instead of black?

  I'm a newb, so please bear with me. I need to define areas of an image just as the effect of edge displays, but I need the edges to be white instead of black? OR is there a similar effect that will do in illustrator or photoshop CS4 version?

  

  You must add:

  effect > distort & transform > transform

  effect > distort & transform > butcher

  Use the appearance of the palette to make. In your case, you can have 2 fillings rather than 2 shots.

• Why is a comp. new pink instead of black?

  I made a model as regular and all seemed well until the comp. loaded up it was pink instead of black here is a picture.

  I use windows 7 ultimate 32 bit with 3 GB of ram

  Maybe this will help:

  "Set the background color of composition."

  I found this by using this search for "color of composition".