Grid control 11.1 archivelog mode database repository

Similar Questions

• Grid Control 11g of the problems with the basic policy of RAC database

  We have a group of three nodes 11 GR 2 (rac1, rac2, rac3) and a policy based RAC database 11 GR 2 (ORCL) with cardinality 2 (ORCL_1 and ORCL_2) on this group. Used to monitor the Control 11g Grid infrastructure. Founded political RAC databases are linked to the pools of the server and not to the cluster nodes, therefore, restart the cluster database instances can run on both on 3 nodes in the cluster. For example, if ORCL_1 is running ORCL_2 and rac1 rac2 Sir after a full reboot ORCL_1 and ORCL_2 can be run on rac2 and rac3 respectively. Binding of the pool with two special nodes will be as if we use database RAC database administrator and not the policy based.
  
  Now the problem is that Grid Control registers the services in database with the node that is running the instance due to which, once the instances are started on a different node, she complained authorities are declining. We don't have to then reconfigure database instances and say Grid Control that they are now on another node. However, this removes the history of AWR for these instances.
  
  Is there a solution to this problem?
  
  Kind regards
  
  Kashif.

  Hi koko,.

  to work around this problem (I think that there is no "automatic" support in the current version of EM for switching hosts databases), you can create an ACTION_SCRIPT for your database cluster resource that is running the relocate_targets command emcli (so an emcli should be placed on all nodes of your and recorded with Super Administrator privileges). So every time you start your database resource, this script command / move the target to the current host without losing any historical information.

  Best regards
  Robert

  Edit: You can find an example of the command emcli in this document written by Rob Zoeteweij: http://oemgc.files.wordpress.com/2011/02/manage-node-failover-in-an-active-passive-setup-using-oracle-enterprise-manager-grid-control1.pdf
  In this scenario is an active/passive environment, but the command itself appies to your situation, too.

  Published by: Robert Hanuschke on August 1, 2011 13:11

• Data Guard - Grid Control - Standby database

  Heys,
  
  now I have to Clusters RAC. The next step will be to set up a database on hold to prepare a graceful failover.
  
  But what are the next steps?
  I currently install GridControl on a separate host with the option: company Manager10g grid control by using an existing database
  The installation still work...
  
  What are the steps? All documentation? Tutorials?
  I need to install agents on each client in the cluster?
  As for name resolution?
  Any configuration of the necessary listener?
  The configuration is made via command line for the Data Guard?
  
  
  
  Christian

  Hello Christian,.

  Maybe you should have Data Guard documentation. Here's the URL:

  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14239/TOC.htm

  There is also a section RAC.

  Greetings from Switzerland,
  David

  OCP 9i / 10g / 11g
  http://www.oratoolkit.ch/knowledge/HOWTO/installation/OTN.php

• The grid control upgrade to release 5

  Hello
  
  We are planing to upgrade to release 5 GC. We have a repository GC data protection configuration. I want to know should I apply the patch to both primary and standby databases, or if we apply the primary (with cutting force) will replicate all changes in sleep mode.
  
  Quick response appreciated.
  
  Thank you

  It must all run through them.

  When you upgrade to version 5 updates/modifications in the repository of grid control will go to a database of physical standby

• installation of Oracle 11 g grid control

  Can I install base data, weblogic and repository grid control in a single server, right? Based on the doc for oracle grid control, it seems good. Please notify.
  Thank you
  
  S.

  Hello

  Which option is the best?

  If you have a CMS and repository in different servers, you can have a more scalable configuration. More, you can also install several WHO (on multiple servers - 1 SGD per host) as shown in this overview:

  http://download.Oracle.com/docs/CD/E11857_01/install.111/e15838/overview.htm#CJAHHFEA

  Of course, this type of architecture is more powerful and allow you to give more resources (CPU, memory) to EM Grid control. If you have hundreds of targets to monitors and dozens of users who can connect and use EM grid control, it may be useful to use this feature ( load balancing, several WHO,...):

  http://download.Oracle.com/docs/CD/E11857_01/install.111/e16847/install_addln_oms_slnt.htm#BABBGGAH

  However, if you have just a few tens of targets and a few users who may connect occasionally to the EM grid control, you can also install all {repository + WHO} on the same server.

  Anyway, in all cases, you must take into account related Harware requirements:

  http://download.Oracle.com/docs/CD/E11857_01/install.111/e15838/appdx_hardware_reqs.htm#CACJBDGF

  And also, it is important to know the Port number used by any component to communicate with each other:

  http://download.Oracle.com/docs/CD/E11857_01/install.111/e16847/firewalls.htm#i1005951

  Hope this helps.
  Best regards
  Jean Valentine

• Using the Grid control with the ALLOWED_LOGON_VERSION parameter

  Hello
  
  We use a 10.2.0.4 database and a 10.1.2.3.0 grid control (with its own 10.2.0.4 database) and WHO and the database are patched up to April 2010 CPU. We tried setting the SQLNET. ALLOWED_LOGON_VERSION = 10 in the SQLNET.ora of the database, but it seems as if the control grid or the agent cannot connect to the database. This is the error that we received from the grid if the parameter is active.
  ORA-28040: no authentication protocol matching (DBD ERROR: OCISessionBegin).
  
  I found no information on activate or not the ALLOWED_LOGON_VERSION if a grid control is followed by a database.
  
  Someone had this problem before?
  
  Thank you
  Francis

  Francis,
  I googled on "SQLNET. ALLOWED_LOGON_VERSION = 10 ". This leads me to SQLNET. ALLOWED_LOGON_VERSION here is a description of the bug 6051243. Seaching on My Oracle support for this bug led me to the notes 466939. Looks like you're running in this bug.
  Note 755605.1 gives you some solutions.

  Eric

• How to use the OEM grid control to find databases, not in archivelog mode?

  Hello
  
  We have currently 130 databases, say, if I want to come off as any database currently NOT in archivelog mode, is there a quick way to find out?
  
  using the OEM grid control
  
  or
  
  a similar trick,
  
  but really do not need to manually check each database.
  
  Thank you very much!

  This query works in 12 c - please run as SYSMAN.
  It is based on undocumented assumptions well + (AND key_value = "NOARCHIVELOG") +.

    SELECT *
    FROM SYSMAN.MGMT$GROUP_DERIVED_MEMBERSHIPS O ,
      SYSMAN.MGMT$TARGET T ,
      sysman.MGMT$AVAILABILITY_CURRENT st
    WHERE
    o.member_target_type     IN ('oracle_database', 'rac_database')
    AND ( t.target_type           ='rac_database'
    OR (t.target_type             ='oracle_database'
    AND t.type_qualifier3        != 'RACINST'))
    AND o. member_target_guid     = t.target_guid
    AND t.target_guid             = st.target_guid
    AND st.availability_status    = 'Target Up'
    AND ( EXISTS
      (SELECT *
      FROM sysman.mgmt$metric_current i
      WHERE I.TARGET_GUID = O.MEMBER_TARGET_GUID
      AND metric_name     = 'archFull'
      AND Metric_Column   = 'archTotal'
      AND metric_label    = 'Archive Area'
      AND column_label    = 'Total Archive Area (KB)'
      AND key_value       = 'NOARCHIVELOG'
      ));
  

  Another way to achieve the goal is to push the extended parameters (SELECT LOG_MODE FROM V$ DATABASE) on each DB and monitor the values they return to the repository. This is an example for a (slightly) different problem - http://iiotzov.wordpress.com/2012/08/08/how-to-use-the-new-oem-12c-metric-extensions-to-enforce-enterprise-wide-custom-policies.

  OEM repository has many other uses grand-http://iiotzov.files.wordpress.com/2012/05/oem-repository-a-second-look.doc, http://iiotzov.files.wordpress.com/2011/08/iotzov_oem_repository.pdf

  Lordane Iotzov
  http://iiotzov.WordPress.com/

• Edition of database repository for Oracle Grid Control

  Can the repository database for Oracle Grid Control standard edition?  Company limited license and cannot use enterprise edition for Oracle Grid Control.  Please notify.  Thank you very much!!

  The requirement is due to the EM dependency on partitioning, which is an option of EE.

  EM 12: Enterprise Manager Cloud control 12 c requires a repository database Enterprise Edition (Doc ID 1438655.1)

  Overview of the prerequisites set EM

  To ensure that the existing, certified Oracle database has the Option of partitioning enabled (therefore, make sure that install you it in Oracle Database Enterprise Edition.) Installation and use of the option of partitioning in the Enterprise Manager repository don't add fees to customers when it is only used by Enterprise Manager.

• Upgrading repository database for the grid control 10205

  Hello
  
  I have the following problem: we took the grid control 10205. It was an upgrade of 10203. By default, it runs a repository 10104. Now I have to spend this repository to 10205 version too. I need to do because this grid control runs on ELinux 4 and we want to improve this ELinux 5 machine, but in the database of ELinix 5 10105 Certification Matrix only is not supported.
  
  Now my question:
  
  To perform this upgrade, I've read that I must first install Database 10205 Software in a separate House and then upgrade the database with the repository. CMS and the repository database are installed in separate houses. Are these references in OMS to host the repository? What should I do after I upgraded the database repository?
  
  Unfortunately I'm not able to find something about this in the Documentation. Everyone speaks of upgrade of WHO and almost nothing on the database repository.
  
  I'd appreciate a lot of the advice.

  Salvation;

  Have you checked the following note:

  How to level a 10.1.0.X or a repository database for Grid Control 10.2.0.4/5 10.2.0.X to a Version 11.1.0.X database [399520.1 ID]

  Respect of
  HELIOS

• RMAN and repositories on the same database grid control

  What are the disadvantages of having the RMAN Repository and repository on the same database grid control?
  
  What effect does this have
  
  1. daily maintenance
  
  2. after disaster or high availability... or the recovery scenarios.
  
  3 is server performance with respect to the use of the CPU and memory - not desirable to have two repositories on the same database?
  
  Currently we have not a RMAN or a repository of GC. We intend to implement both. Angle of savings, it would be good if we can just build another data base for two repositories on an existing database server with 2 production databases. The server has enough CPU and RAM face for 1 new database, but that would mean an exaggeration to have 2 new databases.
  
  If it is not advisable to have two repositories on the same database, then we would need strictly two separate databases, in this case, we will need to go to a new database server host two databases, which the org seeks to avoid, as this would mean that to buy a new license.
  
  I tried searching a few books, but don't have no clear guidance on the same. Any opionion would really help. Thank you.
  
  Concerning
  
  S diallo

  Where this instance fails, all rman needs to restore is in the database control file. How to restore a database with rman from the command line, without a catalog. (The backup and Recovery Guide has details of how do.) This will get data back so that you can use the grid again control.

  In order to insure against a default of the machine hosting the instance, verify that the database is in log mode archive and protected with scheduled backups of hot and copy the backup files to another server.

  Other options for high availability, you have a license (Data Guard, RAC) could also be deployed for this instance, if you need more recovery options.

• Is 10g Grid Control compatible with Database 11g R2?

  Hi all
  
  I tried the certificaction for grid control matrix in Metalink and it shows the latest compatible version of the database to create the repository is 11.1 also I do not know if he could watch a 11.2 database...
  
  If I try to install the usual way, I get an error of invalid version and if I use the silent mode, I'm stuck on an error, so I guess that, for now, it is still impossible.
  
  Any of you have had experiences like mine? I had planned to use it to administer Data Guard...

  If he could watch a 11.2 database...

  It can monitor, at least the basic functions, I added a database of 11 GR 2 targets being watched (more exactly the agent discovered it correctly). New features (and some for dataguard, too) are not yet covered. And it is not supported. 10g is not very accurate, is not the latest version 10.2.0.5 running on Windows Server 2003, don't know about the lower versions.

  The lack of official support, I would not included another 11 GR 2 databases in production environments.

  Werner

• Change of control of the database grid control

  Client ask us to change the grid control to the control of the database.
  The database is located in the windows 2003 server system.
  1. stop the ORACLE agent service;
  2. order entry "emctl start dbconsole", it pops up the message "the service name is invalid.
  3. I try to recreate the dbconsole.
  EMCA - deconfig dbcontrol db-rest drop
  then we stock in the fall of the EM.
  
  Could help them about this?

  Yes, you can always go back to the old situation of:
  Drop the dbcontrol repository
  Start the agent, if it is not already running
  Add the (GC) database or use the agent: directory AGENT_HOME run agentca d

  Your not to go to dbcontrol would be:
  Remove the target GC
  Stop the agent on the server and remove the agent in GC, disable the agent service. Steps if you do not have ' t have any other DB on the server to be monitored by GC

  EMCA - config dbcontrol db-rest create if necessary deposit everything first: emca - deconfig dbcontrol db-rest drop

  emctl start dbconsole

  You may need a patch for dbcontrole according to the db version you are using:
  https://blogs.Oracle.com/DB/entry/enterprise_manager_database_control_configuration_-recoveringfrom_errors_due_to_ca_expiry_on_oracl

  Eric

• Find the status of the Agent of the grid from the grid control repository

  Hello
  
  I need help on the extraction of repository of grid control. My database of the Grid control is 10.2.0.5 on Solaris 64-bit.
  In grid control, there is a report in the reports (installation of Enterprise Manager-> Agent information) tab that displays the status of all agents configured. I have the similar requirment but I will be filtering based on certain criteria and other factors, so I need a query sqlplus to extract information from the repository grid agent base of databases.
  Can someone please help to get information from the OMS using SQL repository Agent * MORE
  
  Kind regards
  Ajay

  Hi Ajay,
  Do you mean something like:
  SELECT
  M.TARGET_NAME, M.START_TIMESTAMP, M.AVAILABILITY_STATUS
  OF SYSMAN. MGMT$ AVAILABILITY_CURRENT M
  WHERE Mr. TYPE_DISPLAY_NAME = "Agent".
  AND M.TARGET_NAME NOT in ('erereeer', 'Scott', 'qwdasdasd')

  Eric

• Repository of grid control

  How to find what database is to have the repository of the grid control?
  I have a SAFLO1 server on which there are about 20 cases of database running.
  I know the Home Agent, but not able to find the repository database.

  Look for the file:
  $OMS_HOME\sysman\config\emoms.properties

  Where you can find this line:

  oracle.sysman.eml.mntr.emdRepConnectDescriptor=(DESCRIPTION\=(ADDRESS_LIST\=(ADDRESS\=(PROTOCOL\=TCP)(HOST\=hostconnect)(PORT\=1521)))(CONNECT_DATA\=(SID\=SID)))
  

  SID = name of your database from the Rep.

  Im sure it is a better way to do it, maybe not. :)

• Growth of database for 6 months in the grid control

  Hello
  
  We have need of my team needs growth of the database for the last 6 months or every month for 6 months.
  
  I have not used before grid control. Can you please guide me how to set up to collect the necessary information.
  
  Thanks in advance.

  Target database size is indicated on the database Instance 'home' Page in the section "summary of the space. If you click on Size (GB) of data, you get a graph called the use of space based on historical data. In the upper area, you can set the 'time set' to be your 6 months.

  You can get this information from the sysman schema repository database´s as well.

  Best regards
  Martin Decker
  www.ora-solutions.NET