Repository of grid control

Similar Questions

• Find the status of the Agent of the grid from the grid control repository

  Hello
  
  I need help on the extraction of repository of grid control. My database of the Grid control is 10.2.0.5 on Solaris 64-bit.
  In grid control, there is a report in the reports (installation of Enterprise Manager-> Agent information) tab that displays the status of all agents configured. I have the similar requirment but I will be filtering based on certain criteria and other factors, so I need a query sqlplus to extract information from the repository grid agent base of databases.
  Can someone please help to get information from the OMS using SQL repository Agent * MORE
  
  Kind regards
  Ajay

  Hi Ajay,
  Do you mean something like:
  SELECT
  M.TARGET_NAME, M.START_TIMESTAMP, M.AVAILABILITY_STATUS
  OF SYSMAN. MGMT$ AVAILABILITY_CURRENT M
  WHERE Mr. TYPE_DISPLAY_NAME = "Agent".
  AND M.TARGET_NAME NOT in ('erereeer', 'Scott', 'qwdasdasd')

  Eric

• OEM grid control host migration

  We intend to pass OEM Grid Control Application and database repository of Solaris 8 box to box of Solaris 10.
  Host names will be different for a box of two.
  Please sujjest how can proceed us to this activity?
  How to reconfigure agents?

  I think that this document 'Grid Control Migration to new server with different hostname or Domainname [ID 1159544.1]' will give you all the answers you need.

  Eric

  Repository of grid control: steps for Cross Platform Migration of the Grid Control Repository/SGD [388090.1 ID] is also good reading.

• The grid control upgrade to release 5

  Hello
  
  We are planing to upgrade to release 5 GC. We have a repository GC data protection configuration. I want to know should I apply the patch to both primary and standby databases, or if we apply the primary (with cutting force) will replicate all changes in sleep mode.
  
  Quick response appreciated.
  
  Thank you

  It must all run through them.

  When you upgrade to version 5 updates/modifications in the repository of grid control will go to a database of physical standby

• Edition of database repository for Oracle Grid Control

  Can the repository database for Oracle Grid Control standard edition?  Company limited license and cannot use enterprise edition for Oracle Grid Control.  Please notify.  Thank you very much!!

  The requirement is due to the EM dependency on partitioning, which is an option of EE.

  EM 12: Enterprise Manager Cloud control 12 c requires a repository database Enterprise Edition (Doc ID 1438655.1)

  Overview of the prerequisites set EM

  To ensure that the existing, certified Oracle database has the Option of partitioning enabled (therefore, make sure that install you it in Oracle Database Enterprise Edition.) Installation and use of the option of partitioning in the Enterprise Manager repository don't add fees to customers when it is only used by Enterprise Manager.

• Upgrading repository database for the grid control 10205

  Hello
  
  I have the following problem: we took the grid control 10205. It was an upgrade of 10203. By default, it runs a repository 10104. Now I have to spend this repository to 10205 version too. I need to do because this grid control runs on ELinux 4 and we want to improve this ELinux 5 machine, but in the database of ELinix 5 10105 Certification Matrix only is not supported.
  
  Now my question:
  
  To perform this upgrade, I've read that I must first install Database 10205 Software in a separate House and then upgrade the database with the repository. CMS and the repository database are installed in separate houses. Are these references in OMS to host the repository? What should I do after I upgraded the database repository?
  
  Unfortunately I'm not able to find something about this in the Documentation. Everyone speaks of upgrade of WHO and almost nothing on the database repository.
  
  I'd appreciate a lot of the advice.

  Salvation;

  Have you checked the following note:

  How to level a 10.1.0.X or a repository database for Grid Control 10.2.0.4/5 10.2.0.X to a Version 11.1.0.X database [399520.1 ID]

  Respect of
  HELIOS

• Install the Grid control / Cloudcontrol

  Hello

  Im trying to set up a Grid control environment.

  If I understand Grid Control is now called "Cloudcontrol", right?

  If I study the Documentation of Oracle 11 I'll end up with references to the old Versions of Weblogic, Java, etc.

  This can not be downloaded more for example.

  Y at - it no Oracle Doc that the names of these press releases?

  Or it would be smarter to implement an environment of 12 c?

  Thank you

  Main difference (new features) between Oracle 11g and 12 c OEM

  Cloud control is the next version of Enterprise Manager and has the same features and functionality in the grid, as well as control of new things (such as the management of the clouds). For more details on new features,.

  See: http://www.oracle.com/technetwork/oem/cloud-mgmt-496758.html?ssSourceSiteId=ocomen

  To the Documentaion 12 c:

  You need to control software for cloud 12 c OEM, software database (for creating repository) and software agent (for tracking targets on other hosts)

  Java Development Kit (JDK) 1.6.0.43.0 and Oracle WebLogic Server 11 g Release 1 (10.3.6) are installed by default with the installation of SGD 12 c, even if you have a possibility to install it separately if you want, but Oracle strongly recommends using the installation process of 12 c to install the JDK and Oracle WebLogic Server for use with Enterprise Manager 12 c.

  Here is the link for Enterprise Manager Cloud control 12 c Architecture

  http://docs.Oracle.com/CD/E24628_01/doc.121/e25353/overview.htm#EMCON112

  For 12 c WHO installation steps refer to

  http://docs.Oracle.com/CD/E24628_01/install.121/e22624/TOC.htm

  EM 12 c R2: How to Install Enterprise Manager Cloud Control 12.1.0.2 using a Graphics Mode (Doc ID 1488154.1)

  For installing the agent, see

  Installation of the Management Agents to help add host Wizard or EM CLI targets

  http://docs.Oracle.com/CD/E24628_01/install.121/e22624/install_agent.htm#EMBSC181

  Installing agents using other methods

  http://docs.Oracle.com/CD/E24628_01/install.121/e24089/part_installing_agent.htm#sthref323

  Download 12 c

  http://www.Oracle.com/technetwork/OEM/Enterprise-Manager/downloads/index.html

  Concerning

  Krishnan

• Retention policy for the grid control

  Hello

  One of our clients wants to change the retention policy of the Grid control to 2 years in order to check the statistics of the application of these last 2 years,

  Default purge policy is as follows:

  Raw metrics - 7 days

  An hour aggregate metrics data - 31 days

  A day aggregate metrics data - 365 days

  Having someone of you will never change these default policies to a great values?

  I'm afraid of performance issues

  Depends on what policy they want change, but I n ' tthink this will help you at all.  If they are looking for AWR data, it is not stored in MS, unless you configure CWA warehouse.   EM will be measures such as SQL response time, but it does not store the SQL query and the stats you'd see in an AWR report.   Storing so for 2 years will not help.  If you want just generic performance history, then changing strategies of purge will be fine, but you don't want to store the raw data for 2 years. Keep in mind that you will increase the size of your repository database as well.

• How to use the OEM grid control to find databases, not in archivelog mode?

  Hello
  
  We have currently 130 databases, say, if I want to come off as any database currently NOT in archivelog mode, is there a quick way to find out?
  
  using the OEM grid control
  
  or
  
  a similar trick,
  
  but really do not need to manually check each database.
  
  Thank you very much!

  This query works in 12 c - please run as SYSMAN.
  It is based on undocumented assumptions well + (AND key_value = "NOARCHIVELOG") +.

    SELECT *
    FROM SYSMAN.MGMT$GROUP_DERIVED_MEMBERSHIPS O ,
      SYSMAN.MGMT$TARGET T ,
      sysman.MGMT$AVAILABILITY_CURRENT st
    WHERE
    o.member_target_type     IN ('oracle_database', 'rac_database')
    AND ( t.target_type           ='rac_database'
    OR (t.target_type             ='oracle_database'
    AND t.type_qualifier3        != 'RACINST'))
    AND o. member_target_guid     = t.target_guid
    AND t.target_guid             = st.target_guid
    AND st.availability_status    = 'Target Up'
    AND ( EXISTS
      (SELECT *
      FROM sysman.mgmt$metric_current i
      WHERE I.TARGET_GUID = O.MEMBER_TARGET_GUID
      AND metric_name     = 'archFull'
      AND Metric_Column   = 'archTotal'
      AND metric_label    = 'Archive Area'
      AND column_label    = 'Total Archive Area (KB)'
      AND key_value       = 'NOARCHIVELOG'
      ));
  

  Another way to achieve the goal is to push the extended parameters (SELECT LOG_MODE FROM V$ DATABASE) on each DB and monitor the values they return to the repository. This is an example for a (slightly) different problem - http://iiotzov.wordpress.com/2012/08/08/how-to-use-the-new-oem-12c-metric-extensions-to-enforce-enterprise-wide-custom-policies.

  OEM repository has many other uses grand-http://iiotzov.files.wordpress.com/2012/05/oem-repository-a-second-look.doc, http://iiotzov.files.wordpress.com/2011/08/iotzov_oem_repository.pdf

  Lordane Iotzov
  http://iiotzov.WordPress.com/

• Upgrading to 10g to 11g agent and switch to another grid control

  I have sent a NEW Grid Control 11 g on a new server, but all my targets are enrolled in an OLD 10 g grid control.
  
  Now, I would like to upgrade an agent 10 g saved with grid OLD command 10 g for an oracle target 10.2.0.5 dabase running 32-bit Windows),
  using the pull (agentDownload.vbs) method.
  
  It is supported to run agentDownload.vbs in upgrade mode by specifying the NEW grid control?
  
  My environment:
  OLD Grid Control 10.2.0.5 on Windows 2003 x 64
  NEW 11.1.0.1 on Linux x 64 Grid control
  Oracle 10.2.0.5 database TARGET. Standard running on Windows 2003 x 86
  
  Thank you
  Julian

  Hi Julian,.

  You cannot run this mentioned during the upgrade. But after upgrade, you can point a WHO to another agent using the following document:

  How to point an Agent to a different grid WHO control and a repository? (Doc ID 413228.1)

  NOTE: Please note that this procedure is valid only for the agents of 10 GB & 11g. This procedure is not valid in 12 c.

  Best regards
  Vincent

  Published by: Vincent thiruveedhi on April 19, 2012 02:57

• Change of control of the database grid control

  Client ask us to change the grid control to the control of the database.
  The database is located in the windows 2003 server system.
  1. stop the ORACLE agent service;
  2. order entry "emctl start dbconsole", it pops up the message "the service name is invalid.
  3. I try to recreate the dbconsole.
  EMCA - deconfig dbcontrol db-rest drop
  then we stock in the fall of the EM.
  
  Could help them about this?

  Yes, you can always go back to the old situation of:
  Drop the dbcontrol repository
  Start the agent, if it is not already running
  Add the (GC) database or use the agent: directory AGENT_HOME run agentca d

  Your not to go to dbcontrol would be:
  Remove the target GC
  Stop the agent on the server and remove the agent in GC, disable the agent service. Steps if you do not have ' t have any other DB on the server to be monitored by GC

  EMCA - config dbcontrol db-rest create if necessary deposit everything first: emca - deconfig dbcontrol db-rest drop

  emctl start dbconsole

  You may need a patch for dbcontrole according to the db version you are using:
  https://blogs.Oracle.com/DB/entry/enterprise_manager_database_control_configuration_-recoveringfrom_errors_due_to_ca_expiry_on_oracl

  Eric

• installation of Oracle 11 g grid control

  Can I install base data, weblogic and repository grid control in a single server, right? Based on the doc for oracle grid control, it seems good. Please notify.
  Thank you
  
  S.

  Hello

  Which option is the best?

  If you have a CMS and repository in different servers, you can have a more scalable configuration. More, you can also install several WHO (on multiple servers - 1 SGD per host) as shown in this overview:

  http://download.Oracle.com/docs/CD/E11857_01/install.111/e15838/overview.htm#CJAHHFEA

  Of course, this type of architecture is more powerful and allow you to give more resources (CPU, memory) to EM Grid control. If you have hundreds of targets to monitors and dozens of users who can connect and use EM grid control, it may be useful to use this feature ( load balancing, several WHO,...):

  http://download.Oracle.com/docs/CD/E11857_01/install.111/e16847/install_addln_oms_slnt.htm#BABBGGAH

  However, if you have just a few tens of targets and a few users who may connect occasionally to the EM grid control, you can also install all {repository + WHO} on the same server.

  Anyway, in all cases, you must take into account related Harware requirements:

  http://download.Oracle.com/docs/CD/E11857_01/install.111/e15838/appdx_hardware_reqs.htm#CACJBDGF

  And also, it is important to know the Port number used by any component to communicate with each other:

  http://download.Oracle.com/docs/CD/E11857_01/install.111/e16847/firewalls.htm#i1005951

  Hope this helps.
  Best regards
  Jean Valentine

• I can't install OEM Grid control on the client computer?

  Hello
  I have two instances of database (11g). I would like to install Oracle Enterprise Manager Grid Control they manage. Can I install OEM Grid Control on the client machine, or just on the server, where are instances of database?
  
  Thanks awfully for help.
  Concerning

  Hello

  You can install OEM Grid control on a separate server.

  But remember that for OEM grid control, you need a database in the repository. This repository can be on the server used for the OMS (Oracle Management Service) or on a separate server:

  http://download.Oracle.com/docs/CD/E11857_01/install.111/e15838/overview.htm#CJAHHFEA

  In any case, it must be aware that Oracle, Oracle Management Service and the repository Agent must be able to communicate with each other and to use specific Ports.

  So be sure that these Ports are open and free to use.

  http://download.Oracle.com/docs/CD/E11857_01/install.111/e16847/firewalls.htm#i1005951

  Hope this helps.
  Best regards
  Jean Valentine

• Where are set up files for the Grid control components?

  I installed Grid Control 11 g on Redhat 5.2, the repository 11.2.0.2 on the same Oracle database box. He worked after installation, but after a few weeks, I restart who and received the error

  [oracle@cchbi bin]$ ./emctl start oms
  Oracle Enterprise Manager 11g Release 1 Grid Control
  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.
  Starting WebTier...
  WebTier Successfully Started
  Starting Oracle Management Server...
  Oracle Management Server is not functioning because of the following reason:
  Connection to the repository failed. Verify that the repository connection information provided is correct.

  Tried on google and the search on the forum, the message is not very selective and got a few resut relevant.
  
  Hope your exterts can point me to the config file where I can check the connetion to the repository. Alos could someone share with me knowledge on the following subjects
  
  (1) what are the process/elements of Grid Control? I am aware of who, the opmn and a running process as/u01/app/midware/oms11g/ccr/bin/nmz - cron - silent. All others? What are their functions?
  (2) the location of the configuration files, log files and binary executables of this process/components.
  
  Thnaks a lot.

  Hello
  to check if the WHO is running correctly run the command "emctl status who" ($OMS_HOME/bin).
  The result should be 'Oracle Management Server is up'.

  To check what components are running, run "opmnctl" order status ($OMS_HOME/opmn/bin).
  The result should be something like:

  Process pending: EnterpriseManager0.<>
  -----------------------------------------------------------+---------
  IAS-component | process type. The NEST | status
  -----------------------------------------------------------+---------
  DSA | DSA | N/A | Down
  LogLoader | logloaderd | N/A | Down
  HTTP_Server | HTTP_Server | 26470 | Alive
  DCM-demon | DCM-demon | 26301 | Alive
  OC4J. Home | 1953 | Alive
  OC4J. OC4J_EMPROV | 1954 | Alive
  OC4J. OC4J_EM | 26523 | Alive
  WebCache. WebCache. 27085 | Alive
  WebCache. WebCacheAdmin | 27086 | Alive

  Running this command will answer your question whioch components need / should be in place when you use OEM/GC.

  You will find some of the CMS log files in $OMS_HOME/sysman/log (emoms.trc, emoms.log, etc.). Please check logfile OC4J ~ OC4J_EM ~ default_island ~ $1 OMS_HOME/opmn/logs as well...

  To start the SGD, you can try the command "opmnctl startall '...

  HTH

• 11g grid control agent configuration

  Hello guys,.
  
  I have the problem with the configuration of the control agent Grid 11 g. The root cause of the problem is that the target machine is in the DMZ area. So, it lacks the active ports. Other agents, I have installed is working properly.
  
  The I'm talking about is able to download the data, but in the case of your setup I get the error message: "error occurred while obtaining information for the specified target. Possible reasons include: the target doesn't exist. failed to connect to the target. »
  
  Here, you're out of emctl agent status
  
  Oracle Enterprise Manager 11 g Release 1 control Grid 11.1.0.1.0
  Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
  ---------------------------------------------------------------
  Agent version: 11.1.0.1.0
  Version of the WHO: 11.1.0.1.0
  Protocol version: 11.1.0.0.0
  Home Agent: / orahome/agent11g
  File binary agent: agent11g/orahome.
  Agent process ID: 3011
  Parent process ID: 2985
  Agent URL: https://demodb:1830/emd/main /.
  URL of repository: https://admin:4900/em/upload
  Started at the: 2011-02-11 10:23:43
  Started by user: oracle
  Last reload: 2011-02-11 10:39:40
  Last download successful: 2011-02-11 17:04:08
  Total megabytes of XML files uploaded so far: 20.98
  Number of XML, waiting for loading files: 0
  Size of the XML files in the upload wait (MB): 0.00
  Available disk space on the file upload system: 14.21%
  Last pulse in SGD: 2011-02-11 17:13:05
  ---------------------------------------------------------------
  Agent is running and ready
  
  emctl status who-details
  Oracle Enterprise Manager 11g Release 1 Grid Control
  Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
  Enter the password to Root of Enterprise Manager (SYSMAN):
  Console server host: admin
  Console HTTP port: 7788
  Console HTTPS port: 7799
  Download HTTP port: 4889
  Download HTTPS port: 4900
  SGC is not configured with the PES or virtual host name
  Download of the agent is locked.
  SGD console is locked.
  CA active ID: 1
  
  Active ports:
  Admin to demodb-1830
  of demodb to admin - 4900, 4889
  
  What other ports available to be activated? 1521?
  
  Thanks in advance!
  Good day

  Then I think it's time to start checking the logging firewall product to see what the port is blocked and why it is blocked. Ask your technical firewall guys/girls so he or she can do. Otherwise, it will become a never-ending story.

  Eric