From JDeveloper fails with an error "cannot find a J2SE SDK installed to the path... »

Similar Questions

• Impossible to find a J2SE SDK installed to the path: < ECLIPSE_INSTALL_PATH > \jre6

  I try to run SQL developer for the first time, but get the error message similar to the following:
  
  Impossible to find a J2SE SDK installed to the path: < ECLIPSE_INSTALL_PATH > \jre6
  
  * < ECLIPSE_INSTALL_PATH > - advanced to the Eclipse installation path (includes JDK 6_U16)
  
  I tried setting the JAVA_HOME to < ECLIPSE_INSTALL_PATH > \jre6 environment variable that does not work.
  
  Can anyone help? Thanks in advance.

  Developer SQL requires a JDK to run (you are actually showing a JRE).

  To set the location of the JDK to use for SQL Developer, you can add the next line with the path to a valid JDK installation:

  C:\Program Files\Java\jdk1.6.0_18 SetJavaHome

  sqldeveloper.conf, usually located in /sqldeveloper/bin

• Oracle 11 GR 1 material on Windows Xp error cannot find J2SE SDK installed to the path

  When I type in the path to java.exe in SQL dev., I got error ' cannot find J2SE SDK installed to the path: C:\Program Files\Java\jre6. "when I entered the path C:\Program Files\Java\jre6\bin\java. What is the reason for this error? How can I fix it? Installation of the database say it was successful

  Developer SQL must the JDK Java JRE not to operate successfully. Your path looks like a path for the JRE. There is a download of windows that comes with the Java developer kit.

  concerning

  Niall

• SQLdeveloper said when at the beginning of navigation in C:\Program Files\Java\jre8\bin: "cannot find a Java SDK SE to the path C:\Program Files\Java\jre8\bin.

  SQLdeveloper said when at the beginning of navigation in C:\Program Files\Java\jre8\bin: "cannot find a Java SDK SE to the path C:\Program Files\Java\jre8\bin.

  Runs as an administrator.

  I'm administrator of my PC with Windows 7 64 bit.

  Installed the Java jdk-8u11-windows - x 64 .exe.

  You're VERY close - just remove the part "\bin".

• Cannot find a J2SE SDK installed

  Hello

  I installed SQL Dev 3.2.2 and when to run. I am asked to show java.exe.

  Then I go to C:\Program Files (x86)\Java\jre7\bin\java.exe

  I get the error message:

  Could not find an installed J2SE SDK.

  Any solution?

  Thank you.

  You can read in the 3.2.2 release notes:

  • JDK support
    • Oracle SQL Developer 3.2 version comes with JDK 1.6.0_35. You can use the JDK download embedded or to connect to an installed JDK. Developer SQL supports a java version minimum of to a maximum java version 1.6.0_04 less than 1.7.

  If you use the JDK 1.6 or

  install the SQL Developer 4.0 version, it works with 1.7

• Flash the disk errors "cannot find this point, located more in the computer.

  OK, I'm trying to copy a file to a flash drive.  It crashes when you try to copy and then gives me the error message "cannot find this point, located more in the computer.

  I tried to drag and drop several different files and file types, and I get the same error message.

  I tried several different flash drives and I get the same message. All flash drives that I tried on this computer work on other computers and I can drag and drop files on the flash drive.

  I've tried several different USB ports on my computer and I still get this message.

  Thus, the issue is not with my flash drive or the files I'm trying to copy because I tried several types of files and several different flash drives. I deleted the USB driver and reinstalled with no resolution.

  I use Windows 7 premium x 64

  Hello

  Thank you for the update from us.

  Since the issue is conflict pilot due to printer driver, the problem you are experiencing is specific to the printer driver. I suggest that you please contact the manufacturer of the printer support team for assistance.

  Hope this information helps, post us a problem with Windows, we will be happy to help you.

  Thank you.

• Connection with ODI error - cannot find the JDE. INI

  Hi all

  I'm ODI configuration to connect to JDE E1.

  I'm consultant JDE but not configured the DEMO for JDE environment. In this environment, JDE. INI is located in C:\Windows.

  I copied the jas.ini, jdbj.ini and jdelog.properties on the server of the ODI.

  What library path I should add the path for jde.ini?

  If it's in ODI, then, would I need to copy JDE.ini on the server of the ODI as well?

  Thanks for any input.

  May 27, 2014 06:22:31, 210 [DEBUG] - [JDBJ] connection represented by poolKey E1Local_JDE archived in pool - com.jdedwards.database.impl.physical.JDBPooledConnection@737398f

  May 27, 2014 06:22:31, 211 [DEBUG] - [JDBJ] JDBj service [main source database table] found [object librarian Local] key in the database, returned 1 entries.

  May 27, 2014 06:22:31, 215 [SERIOUS] - [JDBJ] could not find JDE. INI. java.lang.IllegalStateException: failed to locate the jde.ini file.  Must be able to locate this file in a Mobile configuration.  The path of the jde.ini must in the java.lang.System property "java.library.path".

  May 27, 2014 06:22:31, 215 [SERIOUS] - [JDBJ] Impossible to generate the password of local database WIN32 client.

  May 27, 2014 06:22:31, 224 [SERIOUS] - [BASE] com.jdedwards.database.base.JDBException: [INVALID_CONNECTION_PARAMETERS] no valid database user or password sent in.

  May 27, 2014 06:22:31, 224 [SERIOUS] - [BASE] com.jdedwards.database.base.JDBException: [INVALID_CONNECTION_PARAMETERS] no valid database user or transmitted in. com.jdedwards.database.base.JDBException password: [INVALID_CONNECTION_PARAMETERS] no valid database user or password sent in.

  May 27, 2014 06:22:31, 228 [SERIOUS] - [JDBJ] JDBConnectorImpl.connect (): search retry with the "bootstrap" F0010 record company.

  JD Edwards EnterpriseOne forum is more archived and will be read-only in date 06/06/14. You can re - ask your question in the forum of JD Edwards EnterpriseOne (MOSC) in My Oracle Support community to get a response from the support team. Please note that there is a community of premium clients only. If you want to learn more about access to MOSC, go here. Otherwise, please browse or search our community of Oracle product spaces to find another forum to post your question. Thank you!

• Problem with drivers - error: "Cannot find EBLib.dll" - Satellite A110

  Hello
  Since last summer, I have a Satellite A110. I formatted it in order to install Windows XP Pro. I found and downloaded the drivers and the HotKey Utility software, boot, I have a nice error message that says "cannot find the EBLib.dll."
  I searched the web, and I've not found anywhere to download this DLL. On the site Web of Toshiba, the same thing...: s

  Where can I find this dll?

  NB: Please excuse my language, but I'm not English: P

  Thank you very much

  Hello

  These problems may occur if you do not install the drivers and tools in the correct order.
  You will find this order on the pilot, called installation instructions download page.

  Good bye

• RegisterMetadataDBRepository running from WLST fails with an error

  In order to deploy my application WebCenter Portal to a stand-alone Weblogic Server I "must first register the new MDS schema with the field applications that run on the management server can access.

  According to the literature (Deployment of Applications WebCenter) there are two ways: through the EM and via the registerMetadataDBRepository command. As I have not yet installed the em, then I prefer the latter. Unfortunately, when using WLST and connect to the server, the command ends with an error:

  WLS: / domaine_par_defaut/serverConfig > registerMetadataDBRepository (name = 'mds1', dbVendor = "ORACLE", host = "localhost" ', port = '1521', dbName is 'webcenter', user = 'DEV_MDS', password = ' welcome1 ", targetServers = 'AdminServer')

  Traceback (innermost last):

  Folder "system <>", line 1, in?

  NameError: registerMetadataDBRepository

  (the 11.2 database is in place, the user DEV_MDS/eu1 has created the system via the remote control and can connect to the database via sqlplus)

  In addition, the command help ('registerMetadataDBReposity') returns: no help for registerMetadataDBReposity found. Is it everything that I did to be able to run the command? Please, advise.

  Hey jiri.

  Try without the attribute names: registerMetadataDBRepository ('mds1', 'ORACLE', 'localhost', '1521', 'webcenter', 'DEV_MDS', 'welcome1', 'AdminServer')

  Kind regards.

• Hypothesis: Try to recover from a failed installation of XP Service Pack 3? - and - install correctly the e-mail client!

  Windows XP Home - I dropped a SP3 installation failure - and continued to my business.  Started to get the error message with IE features failed: "mail client is not properly installed.»  Advice seemed simple - "set access and default program ' but I couldn't find the options described by 'start' or 'control panel' research brought me to information which"set the default settings of the program"was a feature in SP1.
  So, here I am making assumptions.  1. How can I "correctly install customer e-mail (I use aol).»  2. I NEED TO revisit the attempt to install SP3?  Did the failure of the installation of the SP3 clear features in SP1?  Start a new installation of SP3?  Thanks for all the advice (but please enter slowly to more old-but-eager man who yet does not speak "geek" very well).  Thanks in advance. -Bill

  Is IE7 or IE8 installed?

  Which application should be the default email Client?

  To reaffirm the default value: start | Settings | Control Panel | Add/Remove programs. Set Program Access and Defaults. Click on the arrows pointing towards the bottom right of the configuration that is already checked. E-mail: Select Client Mail appropriate here (not "use my current... »).

  Illustration: http://www.winsupersite.com/images/reviews/xp_sp1_beta_03.gif

  Assuming that you are running WinXP SP1 or SP2, see...

  HOW to get a computer that is running Windows XP SP1 (a) or SP2 fully patched
  [You can probably skip step 4]
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  NB: Computers running under that WinXP SP2 will NOT be offered additional updates of security reviews, automatic updates will stop working, and Windows Update Web site will be unavailable after April 12, 2010, until that SP3 is installed.

  PS: Free unlimited installation and compatibility for WinXP SP3 support was available from April 14, 2008 to end of May 2009.  This support will cost you 59 US$ per incident now.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Stand-alone application with LabView 7.0 get error cannot find DAQmx clear task.vi

  I tried to create a stand alone vi with the Build Application or shared Library (dll) in LabVeiw 7.0

  When I put it on another PC to test it I get the error "cannot find DAQmx clear task.vi.

  the other PC also has 7.0 and 8.1 DAQmx Labview.

  I think my problem is in the source tab, where you are supposed to add dynamic vi and support, I have search the forums and database of nor and have not found a solution.

  Hi LabTech09,

  When you run the executable file on the other computer, that's when you get this error?  You have the same exact versions of DAQmx and LabVIEW on both computers?  Is the dialog box allow you to navigate to the clear task.vi DAQmx?  If so, you can find these screws in C:\Program NIUninstaller Instruments\LabVIEW 7.0\vi.lib\DAQmx\configure\task.llb.  The executable runs on the development computer (the machine, it was compiled on)?

• Problem with the library: need error cannot find /usr/lib/webplatform/plugins/jnext/libpushjnext.so

  Hello

  I have the application developed by WebWorks 2.0. After a year, I need to get the new version of my app, but when I install and run my application on the device, the application displays an error message:

  Need error cannot find /usr/lib/webplatform/plugins/jnext/libpushjnext.so

  I don't understand why I have this error, because the original version of my application works very well.

  I read a lot of posts on the forum but none of the posts helped me.

  The post office

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/require-error-can-t-find-usr-lib...

  and the post

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/deploy-WebWorks-app-into-device/... says I have to add the library. But I use only the push notification and push notification does need that com.blackberry.push and com.blackberry.invoked.

  Does anyone have any experience with the problem? Or does anyone have any ideas how to fix?

  onesto

  Hello chadtatro,

  Thanks for your tip.

  My problem was that I did not define cordova directory in the environment variable windows. When I added the cordova directory to the path in environment variables, my problem has been resolved.

  It is necessary to have a set of cordova in the command line in the case that your application uses a library of cordova.

  There are link setting cordova:

  https://Cordova.Apache.org/docs/en/5.0.0/guide/CLI/index.html#Add-plugin-features

• TestStand Java - 1500 error cannot find the class

  Hello world

  I use Java 1.7 and TestStand 2010.

  I try to add a java class in the computer example folder and call the method.

  The java class is just as below, because I'm just trying to call my own java class.

  I put the class path to start the JAVA virtual machine in the directory where the example of the computer (which is also the directory where I put my java class).

  TestStand can call methods of the computer, but not mine (received the error 1500 error cannot find class). I put my my java method call among calls for default computer example.

  Also I read similar topics, but again I can not resolve the error.

  Where is the part that I'm bored, in fact? Please share some ideas.

  Note: I even try to leave the empty class path, but TestStand can always call the methods of the computer. Why?

  ----------------------

  public class TestJava {}

  Public Shared Sub main (String [] args) {}

  }

  public String returnString(boolean a) {}
  Return "success";
  }

  }

  To load a class which is within a package, you can use the package rating (or change the example in order to to use). The path to the class is passed directly to the JAVA virtual machine to load the class, but really what is necessary is the package from the class path, including the full path to the class.

  This means you need to do the following:

  1 set the class path in the base directory where you created all your classes, if you have the following structure:

  • MyFile.java
  • builds
  • • MyPackage
    • • MyFile.class

  You must set the classpath in the builds directory

  2 when you set up your steps, you must set the path to the class in your steps from Java to MyPackage/MyFile.class (note the separator is a forward slash, not used Windows backslash, then the Browse button is not quite help with that).

  Another important thing is that when you set the classpath variable you remove the normal Java class path, if you are using Java classes from the library by default, you may have to add \lib\rt.jar

• BlackBerry Smartphones Runtime error "Cannot find system in the file table.

  I need help!

  I have a Blackberry Curve 8310 and have recently installed Version 4.5

  I'm trying to set my synchronization.  I followed the steps to set up my Outlook 2007 calendar.  He told me congratulations! You have configured the product. However, when I press Finish, I get a runtime error "cannot find system in the file table.

  I uninstalled the program and reinstalled - the same error.

  Any help would be appreciated!

  FIGURED IT OUT!

  The following steps, which are displayed on the RIM support will work; However, I had to do it another way.  In step 1, it says that ilxolkCompanion.fil is located in the path C:\Program Research In Motion\BlackBerry\Connectors\MS Outlook Connector... However, when I searched this file, it was actually located in C:\Program Files\Blackberry\Connectors\MS Outlook Connector.  (Maybe it's because I upgraded from 4.2.2 to 4.5 w/o filling a clean uninstall... not too sure why)

  Once I located the file via the command prompt, I have not recorded in accordance with the instructions of step 1.  I then followed step 2 exactly Word for Word... and VOILA!  I have now Version 4.5, working with MS Outlook 2007

  Resolution

  If the connectors folder is always present in C\Program Research In Motion\BlackBerry\Connectors\MS Outlook Connector, follow these steps:

  1. Unregister the old of the Microsoft Outlook ilxolkCompanion.filconnector.
     1. Open the command prompt.
     2. Navigate to C:\Program research in Motion\BlackBerry\Connectors\MS Outlook Connector.
     3. Type command regsvr32 u ilxolkCompanion.fil.
     4. In Desktop Manager, Microsoft Outlook is no longer appears as an available desktop application.
  2. Save the latest Microsoft Outlook Connector.
     1. Navigate to C:\Program research in Motion\BlackBerry\IS71 Connectors\MS Outlook Connector.
     2. Type the command regsvr32 msoutlookconnector.fil.
     3. Office Manager, Microsoft Outlook will be now stored as an available desktop application.

  Once these steps have been completed, configure synchronization again.

• The database recovery/restore failed with unexpected error 509

  Hello

  The database recovery/restore failed with unexpected error 509

  In the Event Viewer, I had this error SEVERAL times every second.  He goes absolutely crazy.

  I don't know what to do with it.

  I'm with Windows 8 Pro running on a very stable computer with 8gig of ram, plenty of hard drive space.  Each single drivers updated Windows Update.  Everything is really clean except this error in Event Viewer

  Svchost SRUJet (1624): database recovery/restore failed with unexpected-509 error.

  Task category: registration/recovery

  Esentutl /p /r tried / everything but nothing wrong was found with those

  Thanks for any help.

  Exactly the same problem, nothing Microsoft recommended was the cause, scannow and DISM commands are returned without error.

  So I went to the event viewer and scrolled down to find, when these errors began to occur. So I found a few entries initially saying things like: an attempt to move the file 'C:\Users\xxxxx\AppData\Local\TileDataLayer\Database\EDB.log' to 'C:\Users\xxxxxxxx\AppData\Local\TileDataLayer\Database\EDB00008.log' failed indicating system 183 (0x000000b7) error: "cannot create a file when that file already exists.

  Then, I went to C:\Users\xxxxx\AppData\Local\TileDataLayer\Database\ and removed the files listed (e.g., EDB00008.log).

  Bingo, the errors will stop immediately.