Grid settings and vDGA K2

Hello

We have a demo environment with view Horizon 6.0.1 2 ESxi hosts and one with K1 and K2 of the grid grid.

I got network cards to work, but I have a few questions, or configuration issues.

On the virtual machine that we want to use to vDGA I'm not sure what to have configured under video card, the only thing that works is like the image below.

But this is a strange problem. If I configure the VM as the image and then starts the virtual machine immediately, it works fine. If I wait 10 to 20 seconds before you start the VM or ig I stop the virtual machine and start it again, it fails with the following error

If I then check the settings of the virtual machine, I see that he has changed it follows automatically

So my question is what am I doing wrong? Also what about 512 memory, expected it be an another setting on it?

IM new to vDGA and vSGA so always learn.

Don't know what the problem was, but I created a new virtual machine, and then the configuration has been authorized. So I guess that where there is something corrupt with as a.

Tags: VMware

Similar Questions

  • GRID K2 vSGA and vDGA Stats

    Hi guys,.

    I have set up on my card GRID K2 vSGA and vDGA.

    I have a desktop dedicated with 1 GPU attached and with dxdiag appears Nvidia GRID K2.

    I have several offices shared using vSGA.

    Both work as expected.

    However when I go to the command line and run the command of nvidia-smi it shows only 1 on the GPU. Now I know what GPU covers desktop vSGA because if I run an application in one of these workstations GPU-Util increases. So why I don't see the use of the GPU vDGA / not even arises? Is this a normal behavior? If so, how can I see the performance of the dedicated GPU?

    Thank you very much

    LukeCapture.PNG

    This is normal/expected since the ESX do not see the GPU that you went through to the virtual machine with vDGA.

    To vDGA, you will need to get inside the virtual machine statistics.

    Linjo

  • 6 ESXi, nVidia GRID, vCSA and problems of Console mouse

    All,

    I'm running into a problem with the mouse on my VDI machines control deployed with GRID NVidia GPU in k-1.

    The machines I deployed with the GPU K1 can no longer be controlled by using the console.  Either thick client or web client.  The servers that are running on the same host are fine, but anything with map GRID on it, fails to display the mouse in Console.

    Rotates through the documents best practices for GRID map and all parameters seem to be good.   Also tried to re - install (uninstall, reinstall) VMtools.

    Any help is appreciated.

    Thank you!

    You will lose the console if you use vGPU or vDGA on a virtual machine.

    I suggest to use another way to on these remote administration, Remote Desktop for example.

    Linjo

  • Clear all settings and data Option

    Hello people of Apple,.

    I recently bought an iPad mini 4 and now want to sell my mini iPad 2 on eBay. I used the option on my phone to reset the phone to the factory settings and then checked on iCloud and Apple to make sure that the device no longer appears. Now, the mini iPad 2 says hello on a white screen and calls for wifi before and I want to ensure only once that I sell and someone he connects to the internet that is not all of a sudden turn off on my iCloud and counts Apple. How can I make sure that this iPad is completely erased, and the next person can set up with their identifier Apple and nothing to do with my accounts?

    Follow this:

    What to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

  • All of a sudden I lost all my emails and none are pass, even if they are still going to my computer. I checked in settings and the e-mail address is still there. Help!

    I suddenly lost all my emails on my Ipad and none are pass, even if they are still going to my computer. I checked in settings and the e-mail address is still there. Help!

    Have you tried to delete the account and adding it back?

  • voice on does NOT even when her off in settings and return to factory reset

    voice on isn't turned off, even when its off in settings and I did a btw the last Apple tv a factory reset update

    For the VoiceOver:

    Settings > general > accessibility > voiceover

    For a description of the Audio:

    There are two parameters that can affect the audio descriptions; the first is a universal framework and can be found at settings > general > accessibility > Audio Descriptions and the second is a parameter that affects the movie playing, it is sliding down while the movie is playing and change the language setting on the audio tab.

  • Just set up. Can send messages ok - but don't receive any - controlled settings and ok

    Just configure Thunderbird for the first time. Can send emails fine. Cannot receive emails. Confirmed with f2s/TalkTalk settings and they are correct.

    Where now?

    None of the settings I saw on their website related to the connection security. I would set the POP server to 110 port and password encryption "None."

    The password encryption setting is at first glance a logical and sensible option, but in my experience, this particular configuration option is not common. My lineone account is the only one I've ever had who used it.

  • Update of Firefox version make my settings and preferences reset themselves or they stay the same

    I wanted to know if when I update or the firefox browser is automatically updated to the latest version so my settings and browser preferences etc. that I made for the firefox browser change or reset themselves by default because I do not wish that they be as it is and would be a nuisance if I keep things from setting back again and again when the browser is updated to the version newer and newer so tell please me it doesn't, thank you.

    No, Firefox respect your preferences when you update. You should always have the value Firefox automatically updated, like this you keep most secure and the latest version. All your personal data and settings are safe.

  • How to transfer the settings and the new Apple TV 4 applications

    Dear friends,

    I bought a second Apple TV 4 and I need to know how can I transfer/copy settings and the current device to the new applications.  I wish to have two devices with the same settings and applications.

    Thanks in advanced for any help!

    There is no way to copy the settings and transfer one ATV to the other apps.

    You'll have to mimic the settings manually and re - download apps for the new ATV.

  • FireFox update erases the original settings and shoots IE settings instead

    I had considered moving away from Internet Explorer and Firefox will like our default browser to the company that I am administrator for. If I place a test configuration Firefox user like I wanted and then reconfigure IE to turn it off effectively. However, a disturbing event has consider me otherwise. My test user received an update for Firefox and updating pulled all the configuration information of IE rather than preserve the existing installation of Firefox. So essentially it disabled FireFox as well. I really don't want to disable updates, but I certainly don't want to go around and re - configure each of my 140 machines every time Firefox did an update. We also run web applications must have and relys on an older version of java. Even though I know that the latest version is preferred these apps simply do not work with them. Firefox in his infinite wisdom during an update disables my old version of java break my applications. I like FireFox, but I simply don't have time to micro - manage this piece of software. He must keep all settings for the installation of the original version. Is it possible to configure Firefox to do what I want to do it during an update instead of what he wants to do. I thought the software was supposed to make our lives more easy not bogg down day support run fixing fubars FireFox. If Firefox wants an alternative to IE, then it must be a step better. The reason why I want to move from IE, it's that I don't just have time to deal with daily issues due to updates. If Firefox is an alternative browser why it relies on IE to get its parameters.

    BOURNAC

    Hi rbowman there, I can understand how this topic is. Looks like you have configured Firefox on one or two computers. It also seems that you went with the normal version of Firefox. When you first configure Firefox it asks if you want to make settings, history, etcetera. In my opinion, what he does after an update too. Fear in the ordinary. If the employee a right to say yes I want that all my stuff from IE, and we know how that worked. Firefox made a version for the admin of TI. 'S called it Firefox extended support. This allows you to manage the settings and all that an admin would have to do without going to a computer. I recommend you try this. Hope that this time, he's better.

  • Feature request: backup settings and e-mail

    I need a feature to back up and restore settings and emails. There may come a time that I need to recharge my system, and if I can just get a backup so I can restore it later, that would be great.

    I have 4 email accounts in TB, of which 2 are a pain in the ass to set up. In my case, I only need the parameters being all my IMAP mail.

    Suggest questions to ask:
    Backup to email
    Save the settings
    Enigmail so full backup
    etc.

    Thanks for a great product otherwise.

    See https://support.mozilla.org/en-US/kb/profiles-tb?esab=a & s = profile + thunderbird & r = 1 & s = ACE #w_backing-up-a-profile

    I also discuss it here http://thunderbirdtweaks.blogspot.com.au/2012/02/backups.html

  • This will remove all your custom settings and the settings of many extensions.

    Hello

    I was reading this article of knowledge and he says:
    "This will delete all your custom settings and many extensions settings."
    What are the custom settings?

    for example one of these and what else
    bookmarks?
    Add - ons?
    Top toolbar - Customize the toolbar
    Add on the toolbar
    Firefox/preferences
    Authorization Manager settings
    the new page open

    Corrupted preference file
    File preferences may be corrupt, Firefox prevents writing to it. If you delete this file, Firefox will automatically create another when it comes to.

    Here's how to delete the prefs.js file.

    This will remove all your custom settings and the settings of many extensions.
    Open your profile folder:

    In the menu bar, click the Help menu and select troubleshooting information. The troubleshooting information tab will open.

    In the section the Application databases, click view in the Finder. It will open a window with the folder of your profile.
    Note: If you are unable to open or use Firefox, follow the instructions for finding your profile without having to open Firefox.

    In the menu bar, click Firefox and select Quit Firefox

    Locate the prefs.js file (and, if applicable, the prefs.js.moztmp file).
    Delete these files and files prefs - n.js where n is a number (e.g. prefs - 2.js).
    If there is, remove the Invalidprefs.js.
    Restart Firefox. You should now have reset all preferences.

    Based on information from preferences not saved (mozillaZine KB)

    See also http://kb.mozillazine.org/Profile_folder_-_Firefox

    #1: there are too many pref for all kinds of adjustment which will offer a recipe of what you lose and how to keep certain parameters.
    It is possible to copy specific lines of a prefs.js to this file in another profile or restore some settings after deleting this file in the current profile folder.

    All the prefs that show as a user defined and appear in bold on the topic: config page are stored in the prefs.js file.

    This includes the changes you make and data Firefox itself and extensions store as data/parameters in a pref.
    It's

    #2,3: the localstore.rdf file stores the toolbar configuration and other data.

    #4: the current versions of Firefox shows the menu entry "Tabs" at the top menu ' display > toolbars "and" Firefox > Options ' and in the menus toolbar pop-up if the tabs are not in the default position on the top.

    If the notches located on the top and the menu entry is not available and you want to move the tabs under the navigation toolbar, then you have to toggle the pref browser.tabs.onTop false on the subject: config page.

    A restart of Firefox is necessary for updating the menu entry to display or remove.

    Note that this pref will no longer effect when the code Australis lands on the output channel (code Australis will probably land in Firefox 29).

    #5: see https://support.mozilla.org/kb/Clear+Recent+History

    Compensation of the "Site Preferences" clears all exceptions for cookies, images, pop-ups, installing the software, stored passwords in permissions.sqlite and other site specific data stored in content - prefs.sqlite (including zoom on the page).

    Deletion of cookies will delete all specified (selected) cookies, including cookies with an exception allowing you want to keep.

    #6,7: history of search bar is the story of the search bar (Google) on the Navigation toolbar.

    All recorded data to a form on a web page is included in the data in the form, but you can not separate and distinguish the two.

    Browsing history is the history of the web pages you have visited.

    #8: session cookies are always kept in memory and never stored on the disc in cookies.sqlite

    You can only delete specific cookies manually in the Cookie Manager or leave cookies expire when you close Firefox to make them behave like session cookies.

    Cookies of other compensation will include all cookies and don't obey the exceptions that you have made.

    #9
    Data stored in storage DOM is not stored in cookies.sqlite, but it is generally stored in the webappsstore.sqlite file or possibly in the form of data in IndexedDB.

  • Error message on one of my two Windows 7 PC, 64-bit. "The Apple software update server could not be found.  "Check your internet settings and try again.  Can someone advise?

    These last messsage of error on one of my two Windows 7 PC, 64-bit. "The Apple software update server could not be found.  "Check your internet settings and try again.  My second Windows 7 PC Apple Software Update works normally.  The Apple software update version is 2.2.0.150.  Can anyone tell how to fix this?

    I have the same problem and I don't want to lose my content. App Apple Software Update doesn't work

  • Is it possible to restore without losing my passwords, settings and especially favorite?

    Recently, my computer has been infected with a malware that has removed some DLLs and damaged the Firefox, Opera and Google programs.

    The other two browsers I reinstalled without any problem. But Firefox is my main browser and I'm afraid of losing all my information.

    Is it possible to restore without losing my passwords, settings and especially favorite?

    You can check if the Firefox profile folder is always present.

    If that's the case then Firefox will automatically detect its presence and use.

    You should regularly make a backup of your personal data stored in the Firefox profile folder in order to avoid a potential loss in case of problems.

  • Site ads continue to use the proxy settings and I get the message "Authentication required" time and time again. I have stop advertisements to use my proxy settings?

    I have put my school proxy settings and use them very often. On some Web sites, ads continue to use these proxy settings (probably to show me ads based on my preferences or I don't know), and I get the message "Authentication required" time and time again before the end of the loading page. It's annoying because if I have several tabs open and am currently on another page while loading the website with the ads, I'm brought back to this page to authenticate. Can I get asked 3 times to authenticate while this page loads, and it takes forever to load because of this. I don't want to disable my proxy settings because I use it very often. I tried to uncheck the "Accept cookies from Web sites" and nothing happens, it's always the same. I want these ads to stop going through my proxy settings. How do I do that?

    Hello

    You can try the add-on Adblock Plus . In addition to subscriptions, you can manually add URL patterns or click on an ad to add a filter.

    Support

Maybe you are looking for

  • I just downloaded the latest Windows updates, now online videos don't work on Firefox but on other browsers, does anyone else have this problem?

    After that download the latest version of Windows Update, I found that I could not play videos on YouTube or other sites. Switching to other browsers I found that I could play these same videos now without any problems. So I did a system restore to d

  • Why the update did slow my MacBook pro down so

    Why the update did slow my MacBook pro down so much? What could be in the last update of El Capitan to slow my Mid 2010 GHz Intel Core 2 Duo Macbook Pro 2.66 down so much?   He has never run it slow before! Everything takes more time in all areas. Co

  • Re: Laptop-warranty maintenance

    Hey,. I have a Toshiba Satellite Pro laptop, it's about a 10 months now and I was wondering if offer you a service out of warranty for your products? There is nothing wrong with the laptop, just normal wear... Toshiba Australia has a service where yo

  • G1X mark II defining function rings

    I just upgraded to a s90 to a G1x Mark II. In manual mode, the lens ring is what distinguishes the APERATURE, ISO speed, shutter etc.. Is there a way to define the "circle of service" at the back of the camera to take some of these functions? On the

  • follow-up to the issue of data on a USB flash drive recovery

    HP instructions say that the 32 GB flash drive has NOT should be labeled as Windows 8 compatible.   I bought a Sandisk 32 GB yesterday for $20 on sale, but it says on the back that it is compatible. More / or less expensive flash drives did not addre