GRID K2 vSGA and vDGA Stats

Similar Questions

• question General vSGA and vDGA

  Hello

  Need to clear somethings

  If I have a server with 1 x grid K2 card and to use graphics hardware acceleration that I need to either install the driver ESXi Nvidia vSGA or vDGA right?

  If I choose to install the driver nvidia for vDGA I can only configure 2 vms for this dedicated right GUs?

  If I choose to install the driver nvidia for vSGA I set up as mush as the memory on the NIC and host memory are able to right? (half mem GPU, mem half host)

  What is the main difference between K1 and K2 of the grill rack, is just that the K2 2 GPU?

  No matter what expirience with the help of CAD applications on vSGA, im thinking performance etc... problems a user of CAD often must be vDGA (I know it depends on the application, but what's your expirience)?

  > If I have a server with 1 x grid K2 card and I have to use graphics hardware acceleration either to install ESXi Nvidia driver for vSGA or vDGA right?

  VSGA to install a VIB (pilot) from Nvidia, for vDGA that you don't need to install any driver on the ESX, but in the virtual machine.
  

  
  

  > If I choose to install the driver nvidia for vDGA I can only configure 2 vms for this dedicated right GUs?

  Correct, but you could also have a configured with vDGA and one with the vSGA

  
  

  > If I choose to install the driver nvidia for vSGA I can configure as mush as the memory on the NIC and host memory are able to right? (half mem GPU, mem half host)

  You can assign max 512 MB to each virtual machine, half will come from the GPU, the other half of the memory of guests as overhead.

  
  

  > What is the main difference between K1 and K2 of the grill rack, is that only the K2 has 2 GPU?

  K2 have 2 GPU:s and 8 GB of memory, K1 4 GPU:s and 16 GB of memory. The GPU:s are very different, but, the K2 have 2 Quadro K5000 and K1 have 4 Quadro K600.

  > Any expirience with the help of CAD applications on vSGA, im thinking performance etc... problems a user of CAD often must vDGA (I know it depends on the application, but what's your expirience)?

  I have some experience and to be honest its very difficult to say at the outset that the technology that will be more suitable. I recommend to install a few test machines and let real users to evaluate.

  For one of my clients, they found the solution not to appropriate to their main designers but are several other usecases, teleworkers, construction sites, scenarios of training partner, access, etc. that makes the very successful solution.

  
  

  You could also have a look at the newly announced Nvidia vGPU technology that will be available with vSphere 6.

  Linjo
  

• vsga and vdga change

  Is it possible to change the type of jobs of work virtual view of 3D graphics acceleration?

  I mean if I have a VM configured for VSGA and only for a period of time they need a VDGA and at the end of the graphic intensive work they need to return to VSGA is possible?

  Yes but it takes some downtime and manual configuration of the parameters of the virtual machine.

  (Unless you do a few scripts around it and automate it somehow.)

  Linjo

• vsga and vdga on the same host

  Hello

  Is it possible to have different pool created on the same host and have some VM (pools) that use VSGA and other virtual machines (pool) that are using VDGA on the same host?

  Yes it works very well! (Assuming you have at least 2 GPU:s or Board with more then a GPU as a K1 or K2)

  Linjo

• Availability of Web Cache and critical States

  Hello
  
  We have recently set up the Grid control. The notification is enabled. I was more EM alert on my mail but unable to interpret it. Can someone help me in this.
  

  Target Name = EnterpriseManager0.mumsoldsoproj01.ad.crisil.com_Web Cache
  Target = Cache Web Type
  Host = mumsoldsoproj01.ad.CRISIL.com
  Metric = Hits (% of applications)
  Metric value = 16.67
  Timestamp = 15 April 2009 16:38:29
  Severity = critical
  Message=16.67% queries have been cache hits
  Notification rule name = availability Cache Web and critical States
  Notification rule owner = SYSMAN
  Notification Count = 1

  thanks

  Looks quite obvious.
  Grid control is delivered with Oracle Application Server and Oracle Application server consists among other things of Oracle Http Server and Oracle Webcache.
  Caches frequently accessed WEBCACHE URL in memory to avoid everything that the reading of the disc.
  And, Yes, Grid Control is constructed using generic components, so all traffic between Oracle Management Server and the repository database is the HTTP traffic (although WHO and the database are on the same server) so goes via Webcache.
  Grid control comes with several metrics, components different thresholds should not meet. In this cache hit of the webcache ratio is only 16.67%, which is below threshold.
  You can change the Oracle Webcache configuration using your browser and this process is obviously

  documented

  (And documents are the only thing that anyone here ever reads)

  ------
  Sybrand Bakkker
  Senior Oracle DBA

• What is the Dell's Vision and Mission statements

  Hello

  I searched our intranet trying to find the Dell's Mission and Vision statements and cannot locate.  My colleagues not can find them as well.  Where can we find this information?

  It is worded a little differently, but it's the same thing.

  http://www.Dell.com/learn/us/en/uscorp1/purpose-and-values

• OME does not receive details of the inventory and the State for some devices

  OME does not receive the details of the inventory and the State for some servers.

  For example when looking at one of our PowerEdge R620s is all that presents itself:

  

  iDRAC firmware and LCC is updated (version 2.21.21.21 is installed.)

  I reset the iDRAC, and that did not help.  I have no problem with most of the other R620s in the same range of discovery.

  I deleted the object to OME and re-discovered twice over the past week it but did not help.

  Things seem ok when I use the troubleshooting tool:

  

  Anyone has any info on what may be going on here or how to fix this?

  Thank you

  Hello

  Thanks for the details in the post.

  Wanted to check what version of OME use you - OME 2.1?

  If so, this behavior with ws - man discovery could potentially due to expiry of certificate on this device. You can launch the iDRAC user interface and confirm the certificate information.

  2.1 the OME, the WS - Man communication component is updated. The most recent component does not communicate with the device if that device has been exceeded in the certificate.

  Sslresetcfg running via racadm will reset the certificate. For details and solution, see same threadhttp://en.community.dell.com/techcenter/systems-management/f/4494/t/19653767 .

  Let us know if that helps.

  Thank you
  Vijay

• see URLEncodedPostData.getBytes () and illegal state Exception

  Hi, expert,

  recently when I tried to understand the device encryption, I discovered my starts http grave failed when the device is locked and the encryption is enabled. After the addition of debugging information more, I finally discovered that the exception is thrown to the URLEncodedPostData.getBytes () with IllegalStateException, here is a part of the stack trace:

    IllegalStateException
      No detail message
      net_rim_cldc-11(4DE8751A)
       PersistentContent
       decode
       0x8E80
      net_rim_cldc-11(4DE8751A)
       PersistentContent
       decode
       0xB1FC
      net_rim_cldc-11(4DE8751A)
       PersistentContent
       decode
       0xB18A
      net_rim_bb_browser_lib(4DE8802C)
       URLEncodedFormData
       toString
       0xB6C9
      net_rim_bb_browser_lib(4DE8802C)
       URLEncodedFormData
       getBytes
       0xB6B2
      net_rim_bbapi_browser(4DE88041)
       URLEncodedPostData
       getBytes
       0x411
  

  Then I did some search on the forum, I found this link, and that is exactly the same as what I saw: http://supportforums.blackberry.com/t5/Java-Development/URLEncodedPostData-getBytes-and-Illegal-Stat... As I saw no explanation on this thread, I just open this post to see if there is any explanation about it.  I guess that fi that we can't work around this problem, we would have to write code ourselves url code.

  This proximity. Work of my own URL encoding code which is pretty easy to code.

• I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center.

  Connection to the local network - properties dialog box

  Hi, I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center. But I can't access the Internet. My OS is Windows 7

  Hello Rajaneer,

  Is the computer that you are using a personal computer or a work computer?
  You will need to re - install your network card drivers like something was damaged and it prevents you to access the property:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Problem in BBM blackBerry Smartphones - I do not have a display picture bbm Board and the State. I cannot access it and cannot access my photo or status of the contacts Panel

  I don't have a display picture bbm Board and the State. I cannot access it and cannot access my photo or status of the contacts Panel. Help, please!

  Thank you!

  Then you can try upgrading the BBM to the latest version available for your device?

  Make that first make a local backup of your BBM contacts, after backup, delete or uninstall any existing version of your BlackBerry. On your home screen, go to Options > Advance Options > application > BlackBerry Messenger > delete BlackBerry Messenger of this list (highlight BBM press on the menu key and select delete)

  KB10040 : How to view or delete the application installed on a blackberry smartphone 

  Once it is perform a battery pull reboot by removing the battery while your unit is powered, wait a min, then reinsert back.

  Finally, after the reboot, use your BlackBerry browser and go to www.blackberry.com/bbmdownload and download the latest available for your device.

  _______________________________________________

  Please note :

  If you encounter BBM7 or higher then your BBM Contacts are integrated into your BlackBerry ID after installation when you log in with your BlackBerry ID Contacts is restored back, but if you experience any previous Kathy then first make a backup local, you can save on your press card, see this KB for additional assistance

  KB20554 : How to back up and restore the BlackBerry Messenger contacts list

• I get BSOD on windows 8 and the STATE DRIVER FAILURE error. What should I do?

  I get BSOD on windows 8 and the STATE DRIVER FAILURE error. Never, it happens every time I got close the lid of my portable computer or attempt to put it to sleep. If it helps I have an ASUS S56C ultrabook. I have read other forums and noticed that this problem is related to my minidump file. The link is https://skydrive.live.com/redir?resid=B33EC443BFC08CAF! 239 & authkey =! APosKb0gDrCL_7M. Thanks to all those who can help you

  Hello

  Since there is a new check laptop with the seller and ASUStek support for warranty
  repair. As OEM ASUStek is responsible for the good operation of the equipment both
  and Windows. Keep in mind do you more they tell you it's something
  you did it. Added that even if you are somehow able to solve the problem you
  would that he documented in the case of other problems on the road.

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  =======================================================

  If you really want to solve the problem (which I do not recommend on a new computer
  under warranty):

  Results verified BlueScreenView WinDBG / DumpCHK.

  The Bug_Check has been iaStorA.sys 9F CAUSE i.e. technology Intel Rapid Storage Technology driver.

  9F error checking, {3, fffffa80121cf7f0, fffff800af4687e0, fffffa8013b01c60}

  Probably caused by: iaStorA.sys
  FAILURE_BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_iaStorA.sys

  BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_iaStorA.sys

  iaStorA.sys as of the 09/07/2012 which is Intel Rapid Storage Technology driver.

  fffff880 ' 01638000 fffff880' 01902000 iaStorA T (no symbol)
  Loaded symbol image file: iaStorA.sys
  Image path: \SystemRoot\System32\drivers\iaStorA.sys
  Image name: iaStorA.sys
  Timestamp: Wed Jul 09 13:42:33 2012 (4FFB4239)

  Collate ASUStek support, their drivers and documentation online and ask for their
  Forums about known problems.

  BiosVersion = K56CA.206
  BiosReleaseDate = 21/08/2012<- bios="" is="" fairly="" current="" however="" there="" may="" be="" an="">
  most recent version. Also check updates the chipset drivers and other key embedded
  and separate device drivers.
  SystemManufacturer = ASUSTeK COMPUTER INC..
  SystemProductName = K56CA
  Family = K
  SystemVersion = 1.0
  SystemSKU = ASUS-NotebookSKU
  BaseBoardManufacturer = ASUSTeK COMPUTER INC..
  BaseBoardProduct = K56CA
  BaseBoardVersion = 1.0

  ASUStek links above.

  After checking with ASUStek and if necessary to check updates with Intel.

  For the Intel driver update utility<-- run="" this="" after="" checking="" with="">
  http://www.Intel.com/p/en_US/support/detect?redirector_count=1&

  Intel - <- also="" search="" here="" -="">Quick storage drivers Download Center.
  http://Downloadcenter.Intel.com/

  Forums and Intel - Support - community
  http://intelopenport.hosted.Jivesoftware.com/Community/Tech

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Lead and lead state details status

  It is a two part question on the State of conduct and lead the details of situation.  We are about to revise our current model in SFDC.

  First of all, if you are tracking MQL, SAL, SQL, SQO, do you rely on your CRM drive State and details of the state drive to differentiate the prospects who agreed sales or sales qualified by result status such as Open, work, committed?  If 'no', how are you going to do it?

  Then, here is the revised lead the statutes (in blue) and details of situation lead before us.  Are there statutes obvious lack?

  Working		Committed		Enrich (culture)		Partners
  1st attempt to contact		BANT appeal at the request		Future calendar (contacted but not a SAL)		Application of accepted partner
  2nd attempt to contact		In the Conversation

  Future needs (contacted but not a SAL)

  Partner request denied

  3rd attempt to contact

  Planning meeting

  Future Budget (contacted but not SAL)

  No attempt to contact

  Awaiting response from the customer

  Lack of Contact Info

  The Contact Search

  Awaiting response from the customer

  No answer

  Work of PH

  Disqualified

  Purge

  Convert

  Prospecting

  Competitor

  Bad Contact Information

  Convert to partner

  Account name

  Best practices survey

  Invalid company information

  Converted to Contact (existing possibility)

  Enriched Ph

  No Contact Center

  Duplicate record

  Converted to opportunity

  REP selected

  No decision maker / influencer

  No longer works

  Outside Service area

  Out of business

  These recent ACD / IVR purchase

  Name of the vendor

  Too small

  WFO only

  Hi, Kim.  Thank you for your thoughtful response.  Looks like you've been down this road before and your insight is appreciated.  Follow a few answers/clarification:

  • Open the report - I don't understand the above, but there isn't.  Open (without details) is the default value. Our plan is to implement something similar to what you did; after XX days intact, "resume" and return to a flow of feed.
  • Work situation - this status allows officials to hold the wires in their queue, without worrying about "recovery" we have SLAS in place that limit the duration of that recording can sit in the work, but these SLA is not forced, rather through reports of aging Rep systemattically.  If some representatives sit on the job too long, then they will get a call from their boss. No automatted 'come back' in the case of 'work '.
  • Excellent point on the dependecy necessary to lead State detail for lead status = Enrich.  I make sure to drive retail for committed State.
  • Status of committed - it seems actually a SAL and teams were.  In our version of a report for the pipeline reach and waterfall, anything before Engaged is considered a MQL, suspicious or investigation.  Change in lead to 'Committed' to 'Open' or 'Work' status indicates that it is accepted sales.

  I am happy to know that you (and probably others) rely on status of lead and lead State detail to differentiate what is accepted by sales, and what is simply the collection of dust.  I wasn't sure if there was a better way.  Now, I am more confident in what we do.

  Thank you and have a great Friday.

  J

• DataCopy in Fix and if statement

  Hi Expert,
  
  I'd like to check if it is possible to use "Datacopy" within a solution and if statement
  
  What we try to do, is that:
  
  If the "total account" scenario 2 scenario 1 equals 1 "total account" version, version 2 (summary level of other dimensions).
  then we want to copy the data from the accounts of level 0 (and 0 member of other dimensions level) of scénarion 2 version 2, version of scenario 2 1.
  
  So I want to use an 'If' condition, to define whether the data copy operation can be performed. Is this feasible?
  
  Fear that the copy of data may not work in an If statement, and also when we set the data range, we have the if condition apply to senior level members, while the function of copying data, should copy more members of level 0, so in the face of something like the below:
  
  DIFFICULTY (member of level 0 on side A, B, c... etc)
  
  < dense Member >
  IF
  (toplevel for Member A-> toplevel member B-> Scenario 1-> 1-> Member z version is toplevel for Member A-> toplevel member B-> 2->-> Member z version2 Scenario)
  
  Datacopy scenario 2-> version 2-scenario 2-> version 1
  
  ENDIF;
  
  What would be the best way to handle this?
  
  We are in version 11.1.2.1, BSO planning request. Thank you!

  The solution proposed above should work (can be slow because the blocks need to be created if necessary). You can always struggling on the edge of level 0 members and always compare higher level using cross Sun block IF conditions.

  Fix (Level0)

  IF (PARENT1, PARENT2))
  dim1, dim2 =
  ENDIF
  ENDFIX

  When the condition is true, this would copy the data of dim2 to dim1 for combinations of members of level 0.

• Get information about the VM name, owner, State of the Machine and tools State

  Hello

  I want to write a script to get information about the name of VM, owner, status of the Machine and tools State, because I'm a beginner in powershell I couldn't find any solution yet.

  I know how to get the name of the virtual machine and the owner

  Get-VM | Get-Annotation -CustomAttribute Owner | select AnnotatedEntity, Value
  

  and how to find the tools and the State of the machine

  Get-VM | Select-Object -Property Name,@{N="State";E={$_.Guest.State}},@{N="ToolsStatus";E={$_.Guest.ExtensionData.ToolsStatus}}
  

  Unfortunately I don't find a way to merge the two applications.

  Can someone help me please?

  Kind regards.

  SaPu

  Try it like this

  Get - VM | Select-Object - property Name,@{N="State; E={$_. Guest.State}},
  @{N = "ToolsStatus"; E={$_. Guest.ExtensionData.ToolsStatus}},
  @{N = "AnnotatedEntity"; E = {$attr. AnnotatedEntity}},
  @{N = "Owner"; E = {(Get-Annotation-entité $_-CustomAttribute «Propriétaire»).} Value}}

• Text in turnover and assets States jump down

  I'm sure there's a setting somewhere that I just can not find.

  You can see what I mean at http://www.richtigsingen.de/ uber-erwin - stephan.html where I did the upper tabs for the problem

  or here: http://www.richtigsingen.de/siegbrunn-musiktheater.html where I left as they were.

  When I scroll the "States" in the side - window if whole tab or only the selected - text there is no movement. Only when I go to preview in Muse or publish, then the "roll" and "Active" States - I have chosen to make another color - jump down - on the second page, they disappear in fact behind the Panel. Can someone tell me the setting that I forgot?

  I'm in Vista HP with all the updates and update Muse.

  Thanks in advance for any help with this.

  Karen

  PS - I use Firefox, but I just checked in Internet Explorer and the result was the same.

  Hoohah! Wasn't it exactly, but you put me on the right path!

  I made narrower BG jpg for the tabs that you suggest (60 high pix) and tried. The same problem. Important to note that I had been the creation of the mosaic image on the 'tile '. Then I tried to think another parameter, 'Original size', maybe that would do something. YES! It worked! I discovered, that the size of the original has no importance! As long as I did not "Tile" setting, the text and tabs behave normally. I'm ecstatic.

  Other tiling settings everything works as it should, it's just "tile" that messes up. I wonder if this is a bug.

  In any case, thanks for sending in the window on the right, so to speak.   Now, I can get on the site.