GROUP - "failure of the ack TLB invalid" or a host freezes when voltage VM with PCI passthrough

Hello

in recent weeks, I have the problem that my ESXi host freezes sometimes when the power of a Windows VM to 10 with a NVidia Quadro 2200 PCI passthrough and today I received a GROUP.

psod-04.04.2016.JPG

In my view, what happens first after installation of the patch released on 23/02/2016.

Is it possible that an update is responsible for my problem? I think a new clean install with 6.0U1b to test whether an update is causing my problem.

In the vmkernel.log, this line should be the following line when you start the virtual machine is:

PCI: 717: 0000:84:00.0 device: TV/VC (0 x 1) card restore offset 114

The line before this line is the last line of the vmkernel.log:

NET: 2441: on the network of the VM, 0x200000b portID eth0 wks10

When the virtual machine is running I have no problem...

Kind regards

Stefan

Okay I replaced my server hardware and re-use all (NVidia Quadro, card QLogic FC and Teradici Apex) expansion cards.

The problem disappeared, so something on the motherboard or cpu was broken...

Tags: VMware

Similar Questions

  • "Rowset cannot be loaded because the stream is invalid" when you use vb6 Windows XP

    So try to run the application in VB6 with SP5 runtim in Window XP, I get the error "rowset cannot be loaded because the stream is invalid. In fact, our requirement is VB6 with SP5. I can't fine the SP5 in Microsoft sites that's why I'm running in SP5 runtime. But I get the above error. Please give the solution for this problem

    Hi Vincent SubbarayuduMamilla Alaiah,.

    The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums.

     

    MSDN forums

    http://social.msdn.Microsoft.com/forums/en/category/VisualBasic

  • Dell XPS 8700 - failure of the keyboard when the bios boot (but not when Windows is loaded)

    My Dell XPS 8700 has 10 Windows and a Logitech Keyboard wireless, connected by USB. The keyboard works absolutely fine when Windows has loaded. I have the latest version of the bios, A11.

    However, when the computer is turned on and starts the bios start, it displays 'Keyboard Failure' on the screen for about half a second. When I try to go into the bios setup by pressing "F2" at the counter (I keep typing "F2" from the moment when I press the power button on the computer), there is no answer. The "keyboard failure" and inability to enter the bios setup seems to happen if I do a cold immediately after a stop start, a cold start after the computer is turned off for an extended period or a reboot.

    I tried to connect the wired keyboard original Dell one of the USB ports on the front of the unit (without disconnecting the wireless keyboard) with the same problem at the start of the bios.

    I encountered this problem on versions of bios A11 both A03. I know that in the past, although I don't remember when - I was able to enter the bios setup by pressing "F2".

    Any thoughts on how to solve this problem?

    You can try and reset the CMOS. It will return your settings to factory settings, but not the version. Usually, this erases these problems because CMOS stores data editable such as your wireless keyboard settings. BIOS stores the information about the basic material that is unchangable as your keyboard usb, mouse and other essential equipment. If you notice, when you just plugin any keyboard and mouse, its recognized at startup. Your needs software to run wireless device and that is stored in the CMOS.

    So once reset you the CMOS, you may need to then install the wireless software.

    Good luck.

  • video clips freezing when played in the table of Storyboard

    I use windows 2.6 Director. I converted my files .mov in avi files and imported into movie maker. They play very well until I drag them onto the table of Storyboard and while they freeze when they should play (audio seems to continue even though). I tried to download the windows codecs. What should I do to make a film to work?

    I use windows 2.6 Director. I converted my files .mov in avi files and imported into movie maker. They play very well until I drag them onto the table of Storyboard and while they freeze when they should play (audio seems to continue even though). I tried to download the windows codecs. What should I do to make a film to work?

    ==========================================
    First, there is a version of Vista Movie Maker 6 which
    runs on Windows 7... It's a better program for 2.6.

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Vista Windows Movie Maker Installer for Windows 7
    http://noeld.com/programs.asp?cat=video#wmminst

    Regarding the. MOV files, convert the. WMV format
    should produce a better result in Movie Maker.

    There are many converters to retail and freeware
    available on the net... some are better than others.

    The following freeware converter is an example.

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Freemake Free Video Converter (freeware)
    http://www.Freemake.com/free_video_converter/
    (Windows XP / Vista / 7)
    (* Read * all * the installation screens... it)
    may be a few items you want to unmark *)

  • Change the host for a virtual machine on a cluster and the host is not in accordance with the attached profile

    Hi all

    I have 02 questions.

    1. we have a cluster which has 02 physical hosts (Host1 and Host2). We have 02 virtual machines on the Cluster. Active DRS on the cluster.

    But the problem is that my 02 VMS are always stays on a Host2. A few weeks ago, each virtual machine carried out on each host. How can I place each virtual machine on each host to perform better.

    How to do this?

    2. I connect to the cluster using vSphere client 5.1, under summer host, I get the following message

    "Configuration problems: host is not in accordance with the attached profile.

    I suspect that this is the case for my question 1?

    Thank you very much

    Hello

    I think I found the answer for the problem of home profile. I changed the following values to 1 for each host to > settings > under software > advanced settings >

    Under Data Mover

    HardwareAcceleratedInit

    HardwareAcceleratedMove


    Under VMFS3

    HardwareAcceleratedLocking

    Compliance status is returned to the green.

    Thanks for the advice guys!

    Thank you

  • The code of failure of the authentication protocol Kerberos was "the user account has been automatically locked because too many attempts to invalid login or password change attempts have been requested.

    Hello

    I use Windows 7 (32-bit) with SP1.

    Quite often (at least three times a day) I am to be locked of my PC and cannot connect to 30 mts each time. I've analyzed carefully and there is absolutely nothing wrong with my ID on the front of Windows AD or group etc. policy.

    I am getting event ID 40690 in my observer of events and here are the details...

    WARNING on 09/06/2011 09:07:54 lsasrv 40960 any

    Log name: System

    Source: lsasrv with

    Date: 09/06/2011 09:07:54

    Event ID: 40960

    Task category: no

    Level: WARNING

    Keywords:

    User: SYSTEM

    Computer: workstation.companyname.com

    Description:

    The security system detected an authentication for the HTTP/http-proxy server error - nom_societe.com. The code of failure of the authentication protocol Kerberos was "the user account has been automatically locked because too many attempts to invalid login or password change attempts have been requested.

    (0xc0000234).

    I searched all possible sites and cannot find an appropriate solution.

    As it is causing a lot of inconvenience would appreciate a miracle solution as soon as POSSIBLE.

    See you soon,.

    bcshekar

    Hi bcshekar,

    The question you have posted is related to the area and would be better suited to the net Tech community. Please visit the link below to find a community that will provide the support you want.
    http://social.technet.Microsoft.com/forums/en-us/w7itprosecurity/threads

  • PCPU locked up 0. Ack TLB cannot invalidate (total 1 locked up, PCPU (s))

    I need assistance with GROUP I receive, I'm under ESXi 5.5.0 - 20140902001-standard on a SuperMicro A1SAi-2550F. It will randomly be CMTF on me... and I can't understand why.  Here are a few additional lines of the coredump.  Let me know if additional information is required.

    (2014 12-31 T 01: 26:26.598Z cpu3:33184) ESC [45mESC [33; 1mVMware ESXi 5.5.0 [Releasebuild-2143827 x86_64] ESC [0 m]

    PCPU locked up 0. Ack TLB cannot invalidate (locked 1, PCPU (s): 0 total).

    (2014 12-31 T 01: 26:26.598Z cpu3:33184) cr0 = 0 x 80010031 cr2 cr3 cr4 = 0 x 2768 0x111f80000 = 0xffd42e40 =

    (2014 12-31 T 01: 26:26.598Z cpu3:33184) pcpu:0 world: 392421 name: "vmm0:crow" (V)

    (2014 12-31 T 01: 26:26.598Z cpu3:33184) pcpu:1 World: 33349 name: 'Tcpip4 wtask' (S)

    (2014 12-31 T 01: 26:26.598Z cpu3:33184) pcpu:2 world: 32779 name: "coalesceWorld-0" (S)

    (2014 12-31 T 01: 26:26.598Z cpu3:33184) pcpu:3 world: 33184 name: 'vmsyslogd' (U)

    (2014 12-31 T 01: 26:26.598Z cpu3:33184) @BlueScreen: JEPP locked up 0. Ack TLB cannot invalidate (locked 1, PCPU (s): 0 total).

    (2014 12-31 T 01: 26:26.598Z cpu3:33184) beginning of Code: VMK 0x41801ee00000 uptime: 3:21:18:52.361

    (2014 12-31 T 01: 26:26.599Z cpu3:33184) 0x41238681da30: stack of PanicvPanicInt@vmkernel#nover+0x575 [0x41801ee8d149]: 0 x 412300000008

    (2014 12-31 T 01: 26:26.599Z cpu3:33184) 0x41238681da90: stack of Panic_NoSave@vmkernel#nover+0x49 [0x41801ee8d38d]: 0x41238681db60

    (2014 12-31 T 01: 26:26.599Z cpu3:33184) 0x41238681dc20: stack of TLBDoInvalidate@vmkernel#nover+0x697 [0x41801eea98e3]: 0 x 100000000000000

    (2014 12-31 T 01: 26:26.600Z cpu3:33184) 0x41238681dea0: [0x41801f396b93] UserMem_HandleMapFault @ < None > # < None > + battery 0x92f: 0x41238681df00

    (2014 12-31 T 01: 26:26.600Z cpu3:33184) 0x41238681def0: [0x41801f3802fd] User_Exception @ < None > # < None > + battery 0 x 175: 0xffc734f4

    (2014 12-31 T 01: 26:26.600Z cpu3:33184) 0x41238681df10: stack of Int14_PF@vmkernel#nover+0x122 [0x41801ee6544a]: 0x218248d8

    (2014 12-31 T 01: 26:26.601Z cpu3:33184) 0x41238681df20: stack of gate_entry@vmkernel#nover+0x64 [0x41801eef1064]: 0x0

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) based fs = 0 x 0 = 0x418040c00000 Kgs = 0 x 0 gs

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) .data .bss 0x0 vmkernel 0 x 0 0 x 0

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) chardevs 0x41801f375000 0x417fc0000000 0x417fc0000400 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) .data .bss 0x417fc040e180 0x417fc0400000 0x41801f37c000 user

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) vprobe 0x41801f430000 0x417fc0800000 0x417fc080b7c0 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) 0x41801f46e000 0x417fc0c00000 0x417fc0c00240 .bss .data procfs

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) procMisc 0x41801f471000 0x417fc1000000 0x417fc1000000 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) vmkapi_mgmt 0x41801f472000 0x417fc1400000 0x417fc1400140 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) iodm .data .bss 0x417fc1800138 0x417fc1800000 0x41801f478000

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) vmkapei 0x41801f47c000 0x417fc1c00000 0x417fc1c00ae0 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) 0x41801f484000 0x417fc2000000 0x417fc2002600 .bss .data vfat

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) vmci .data .bss 0x417fc24057c0 0x417fc2400000 0x41801f48e000

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) vmkapi_socket 0x41801f4b1000 0x417fc2800000 0x417fc28005c0 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) vmkapi_v2_1_0_0_vmkernel_shim 0x41801f4b6000 0x417fc2c00000 0x417fc2c08840 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) vmkapi_v2_0_0_0_vmkernel_shim 0x41801f4bb000 0x417fc3000000 0x417fc30080c0 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) vmkplexer 0x41801f4c0000 0x417fc3400000 0x417fc3400260 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) vmklinux_9 0x41801f4c4000 0x417fc3800000 0x417fc3808e80 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) vmklinux_9_2_0_0 0x41801f54b000 0x417fc3c00000 0x417fc3c07e84 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) vmklinux_9_2_1_0 0x41801f54e000 0x417fc4000000 0x417fc4007f98 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) vmklinux_9_2_2_0 0x41801f551000 0x417fc4400000 0x417fc4408838 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) iscsi_trans 0x41801f554000 0x417fc4800000 0x417fc4801800 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) iscsi_trans_compat_shim 0x41801f55f000 0x417fc4c00000 0x417fc4c0096c .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) iscsi_trans_incompat_shim 0x41801f560000 0x417fc5000000 0x417fc50007e4 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) .data .bss 0x417fc5413a40 0x417fc5400000 0x41801f561000 etherswitch

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) netsched 0x41801f596000 0x417fc5800000 0x417fc5804800 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) cnic_register 0x41801f5a8000 0x417fc5c00000 0x417fc5c001e0 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) 0x41801f5aa000 0x417fc6000000 0x417fc6001f00 .bss .data igb

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) random 0x41801f5d0000 .data .bss 0x417fc6400600 0x417fc6400000

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) usb 0x41801f5d4000 .data .bss 0x417fc6801660 0x417fc6800000

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) ehci-hcd 0x41801f5f6000 .data .bss 0x417fc6c002a0 0x417fc6c00000

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) hid 0x41801f601000 .data .bss 0x417fc70004e0 0x417fc7000000

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) .data .bss 0x417fc7400000 0x417fc7400000 0x41801f606000 dm

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) .data .bss 0x417fc7803e50 0x417fc7800000 0x41801f608000 nmp

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) vmw_satp_local 0x41801f62b000 0x417fc7c00000 0x417fc7c00028 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) vmw_satp_default_aa .data .bss 0x417fc8000000 0x417fc8000000 0x41801f62d000

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) vmw_psp_lib 0x41801f62e000 0x417fc8400000 0x417fc8400290 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) vmw_psp_fixed .data .bss 0x417fc8800000 0x417fc8800000 0x41801f630000

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) vmw_psp_rr .data .bss 0x417fc8c00068 0x417fc8c00000 0x41801f632000

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) vmw_psp_mru .data .bss 0x417fc9000000 0x417fc9000000 0x41801f635000

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) libata_92 0x41801f637000 0x417fc9400000 0x417fc9402660 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) libata_9_2_0_0 0x41801f659000 0x417fc9800000 0x417fc9801750 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) libata_9_2_1_0 0x41801f65a000 0x417fc9c00000 0x417fc9c01750 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) usb-storage 0x41801f65b000 .data .bss 0x417fca004780 0x417fca000000

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) vmkapi_v2_0_0_0_nmp_shim 0x41801f667000 0x417fca400000 0x417fca400ca8 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) vmkapi_v2_1_0_0_nmp_shim 0x41801f668000 0x417fca800000 0x417fca800ca8 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) healthchk 0x41801f669000 0x417fcac00000 0x417fcac11e40 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) check 0x41801f680000 .data .bss 0x417fcb0122c0 0x417fcb000000

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) vlanmtucheck 0x41801f693000 0x417fcb400000 0x417fcb412040 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) heart rate 0x41801f6a8000 .data .bss 0x417fcb811f40 0x417fcb800000

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) shaper 0x41801f6b9000 .data .bss 0x417fcbc13ec0 0x417fcbc00000

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) 0x41801f6cc000 0x417fcc000000 0x417fcc000040 .bss .data lldp

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) .data .bss 0x417fcc413480 0x417fcc400000 0x41801f6d1000 cdp

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) 0x41801f6ed000 0x417fcc800000 0x417fcc8125c0 .bss .data ipfix

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) tcpip4 0x41801f701000 0x417fccc00000 0x417fccc18180 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) dvsdev 0x41801f807000 0x417fcd000000 0x417fcd000030 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) dvfilter 0x41801f80a000 0x417fcd400000 0x417fcd400b00 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) 0x41801f82c000 0x417fcd800000 0x417fcd800160 .bss .data lacp

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) vmkstatelogger 0x41801f836000 0x417fcdc00000 0x417fcdc03a00 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) svmmirror 0x41801f85a000 0x417fce000000 0x417fce0000c0 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) 0x41801f867000 0x417fce400000 0x417fce400080 .bss .data cbt

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) migrate 0x41801f86b000 .data .bss 0x417fce804d40 0x417fce800000

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) hbr_filter 0x41801f8ca000 0x417fcec00000 0x417fcec00300 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) vmkapi_v2_1_0_0_dvfilter_shim 0x41801f8f6000 0x417fcf000000 0x417fcf0009b0 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) vmkapi_v2_0_0_0_dvfilter_shim 0x41801f8f7000 0x417fcf400000 0x417fcf400930 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) dvfilter-credits-fastpath 0x41801f8f8000 .data .bss 0x417fcf812380 0x417fcf800000

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) esxfw 0x41801f912000 0x417fcfc00000 0x417fcfc12d40 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) libfc_92 0x41801f927000 0x417fd0000000 0x417fd0000b80 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) libfcoe_92 0x41801f940000 0x417fd0400000 0x417fd04001c0 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) libfc_9_2_0_0 0x41801f946000 0x417fd0800000 0x417fd0800868 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) libfcoe_9_2_0_0 0x41801f947000 0x417fd0c00000 0x417fd0c001f4 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) libfc_9_2_1_0 0x41801f948000 0x417fd1000000 0x417fd1000868 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) libfcoe_9_2_1_0 0x41801f949000 0x417fd1400000 0x417fd14001f4 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) ahci .data .bss 0x417fd1800420 0x417fd1800000 0x41801f94a000

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) sunrpc .data .bss 0x417fd1c02b80 0x417fd1c00000 0x41801f951000

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) 0x41801f960000 0x417fd2000000 0x417fd20039c0 .bss .data nfsclient

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) vmkibft 0x41801f979000 0x417fd2400000 0x417fd24037c0 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) iscsi_vmk 0x41801f97c000 0x417fd2800000 0x417fd28056c0 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) lvmdriver .data .bss 0x417fd2c03380 0x417fd2c00000 0x41801f9a8000

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) deltadisk 0x41801f9bc000 0x417fd3000000 0x417fd3005c00 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) .data .bss tracing 0x417fd3405b40 0x417fd3400000 0x41801f9e7000

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) rdt 0x41801f9ee000 .data .bss 0x417fd3804e00 0x417fd3800000

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) vsanutil 0x41801fa14000 0x417fd3c00000 0x417fd3c069c0 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) lsomcommon 0x41801fa33000 0x417fd4000000 0x417fd4001680 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) 0x41801fa67000 0x417fd4400000 0x417fd4405680 .bss .data plog

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) .data 0x41801faaa000 0x417fd4800000 0x417fd4803840 .bss vmfs3

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) 0x41801fb15000 0x417fd4c00000 0x417fd4c03540 .bss .data vflash

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) .data .bss 0x417fd5002ac0 0x417fd5000000 0x41801fb20000 vfc

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) dvfg-igmp 0x41801fb3f000 .data .bss 0x417fd5400208 0x417fd5400000

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) cmmds_net 0x41801fb45000 0x417fd5800000 0x417fd5802f40 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) cmmds 0x41801fb52000 0x417fd5c00000 0x417fd5c04d80 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) cmmds_resolver 0x41801fb87000 0x417fd6000000 0x417fd6000140 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) 0x41801fb93000 0x417fd6400000 0x417fd641c6c0 .bss .data vsan

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) vmklink_mpi 0x41801fcb0000 0x417fd6800000 0x417fd6802400 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) swapobj 0x41801fcb5000 0x417fd6c00000 0x417fd6c03010 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) vmkapi_v2_1_0_0_iscsi_shim 0x41801fcbd000 0x417fd7000000 0x417fd7000970 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) vmkapi_v2_0_0_0_iscsi_shim 0x41801fcbe000 0x417fd7400000 0x417fd7400970 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) ipmi_msghandler 0x41801fcbf000 0x417fd7800000 0x417fd7800600 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) ipmi_si_drv 0x41801fcc8000 0x417fd7c00000 0x417fd7c00680 .bss .data

    (2014 12-31 T 01: 26:26.605Z cpu3:33184) ipmi_devintf 0x41801fcd3000 0x417fd8000000 0x417fd8000180 .bss .data

    Coredump on the disk.

    (2014 12-31 T 01: 26:26.759Z cpu3:33184) Slot 1 1.

    (2014 12-31 T 01: 26:26.759Z cpu3:33184) Dump: 2215: size using dump slot 2684354560.

    7003

    Very surprisingly, no host did me a GROUP since I updated the BIOS to 1.0 c.  The issue was occurring about all the 1-2 days and it's now 6 with no GROUP day.  I just wanted to point so that people don't think that I abandoned the thread.  Based on what I've observed, it seems that the upgrade of BIOS fixed the question... If something changes, I'll update.

  • Some updates could not be installed: failure on the following security updates - KB974811 KB974556

    Please help me solve this problem.  I have automatic updates set to say "updates are ready for your computer.  Click here to see these updates'; Here is the little yellow icon in the system tray low to the right of my screen.  What happens when I click on this icon is usually I then click 'express install' (and non-personalized) and then press "install".

    My computer sometimes slows down a bit that it downloads / installs these updates and which can be quite a pain in the thigh because it effects everything that I'm working at the moment, and of course because you have to restart the computer.  I have external hard drives 4 or 5 so I to sequentially turn them off one at a time by ejecting them, turn off the computer and then start it back up and restart the hard drives.

    In any case - I can never remember to "SOME UPDATES COULD NOT BE INSTALLED the SCREEN" so I'm at a loss to know what to do.  My computer is perpetually slow because the small yellow Update icon sits in the systray continually trying to draw attention to me and when I do the same thing continues to be time and again - failure!   I tried closing down my antivirus and windows firewall, but nothing helped.

    your help would be much appreciated, either tell me how these updates to get the update of my systray icon, or to get updates of pit.

    According to belarc Advisor - I am running:

    Windows XP Media Center Edition Service Pack 2 (build 2600)
    3.00 gigahertz Intel Pentium 4
    cache of 16 kilobytes main memory
    secondary memory 2048 k-cached

    9 of Avira antivirus
    SUPERAntiSpyware (although it is installation not not at the auto of the msconfig, so its off to the update)

    Thank you!!

    Hello

    Try this 1st to see if it helps, and it should:

    Description of the Patch registration cleanup tool
    http://support.Microsoft.com/kb/976220/

    ------------------------------------------------------

    If necessary :

    Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
    or the update itself - double click a view more information (or click top then discovers on the right)

    Those who will take you to a page where you can download the update.

    Or go here and the KBxxxxxx number to download it.

    Download Center - mount the KBxxxxxx.

    Microsoft Download Center
    http://www.Microsoft.com/downloads/en/default.aspx

    Download - SAVE - go to where you put them - click on - RUN AS ADMIN

    Then you can right click on the update in the updates Windows and HIDE.

    If you get an error Installer install this version:

    Windows install 4.5 Redistributable
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

    ----------------------------------------------------

    Then run this:

    How to reset the Windows Update components? -a Mr Fixit
    http://support.Microsoft.com/kb/971058

    Description of the system for Windows Vista, Windows Server 2008, update tool and
    for Windows 7
    http://support.Microsoft.com/kb/947821

    ------------------------------------------------------------
    Because these are all Office updates you might get more information if necessary in the Agency of those groups that
    may have experienced the same problem.

    Office newsgroups
    http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

    Microsoft.public.office.misc discussions
    http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

    ------------------------------------------------------------

    If necessary you can incident free get reports however the above should take care of it for you.

    Windows updates - free Incident report

    Go here and click on-> Windows Update fails while searching, downloading or installation of updates
    http://support.Microsoft.com/GP/wusupport#tab3

    The security updates, you can get free support Incident report
    http://www.Microsoft.com/protect/resources/support.aspx

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Is windows update causes the failure of the system?

    I have windows XPsp2 and I've updated with XPsp3 and it takes place in a few errors and the failure of the system to my PC. Unlike my aunts PC she XPsp1 with a slow internet connection so she was not able to update, but it works for more than a year. then the causes updated a few problems in the future?

    No, do not keep your computer fully patched all the time causes more problems.

    4 steps to protect your computer
    http://www.Microsoft.com/security/pypc.aspx

    NB: If WinXP SP3 is not installed by April 12, 2010, your computer WinXP SP2 will not be offered as all other reviews of security updates and the Windows Update Web site will not be available.er

    The above has applied to WinXP SP1 computer your aunt since October 2006.

    For you and your aunt...

    HOW to get a computer WinXP SP1 or SP2 fully patched
    http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

    ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

  • FRM-92101: there was a failure in the Forms Server during startup

    Dear all,

    I cloned Oracle APPS R12 on RHEL6 and cloning is complete, but all by opening the form, we receive some error like below.

    «FRM-92101: there was a failure in the Forms Server when booting.» This could happen because of invalid Configuration

    Please look in the log file of the web server for more details. "


    I cut the RPM using

    Oracle E-Business Suite installation and upgrade version Notes 12 (12.1.1) for Linux x 86-64 [ID

    761566.1] metalink document and especially

    OpenMotif *.

    xorg-x 11-libs-compat * RPM


    All the rpm is installed and applied the os library patch 6078836 also. But no luck got still the same error.

    Concerning

    Kumar V

    Dear team,

    Problem solved.

    Solution:

    Applied libxcb - 1.8.1 - 1.el6.i686 rpm and restarted the application services.

    We now able to open the form without problem.

    Thank you

    Kumar

  • Failure of the initial installation of INS-30131 required for execution of the controls of the installer cannot access the temporary location

    When I install Oracle Grid Infrastructure 12 c Release 1 (12.1.0.1.0), I have the following error:

    Failure of the initial installation of INS-30131 required for execution of the controls of the installer cannot access the temporary location

    Cause:-unable to access the temporary location

    Action - make sure that the current user has required permissions to the temporary location

    Details of the addition

    -GLWB-1560: "/tmp/" temporary directory path is shared on the nodes '... »

    The oracle user I use is to have access in / tmp, I did a test by creating a file here.

    Any idea?

    Thank you

    This is the description of the error, I saw, but he was trying to find an idea how to solve this problem.

    Anyway, I solved it by renaming the Group of volumes and accordingly update the fstab and the grub.conf.

    Thank you

    Eugen

  • Departure form on the failure of the Journal with FRM-92101 entry

    Hi guys,.

    When we try to create the Journal on GL we get FRM-92101: there was a failure in the Forms Server during startup. This could happen because of invalid configuration. Please look in the web server for details.

    Details...
    Java exception:
    Abandoned Oracle.forms.net.ConnectionException:Forms < 1 142 > session: unable to communicate with the execution process.

    at oracle.forms.net.ConnectionException.createConnectionException (unknown Source)
    at oracle.forms.net.HTTPNStream.getResponse (unknown source)
    at oracle.forms.net.HTTPNStream.doFlust (unknown source)
    at oracle.forms.net.HTTPNStream.flush (unknown source)
    at java.io.DataOutputStream.flush (unknown source)
    at oracle.forms.net.StreamMessageWriter.run (unknown source)

    And checkin ' the corresponding journal, I found:

    File does not exist: /oracle/PROD01/apps/apps_st/comn/java/classes/oracle/forms/engine/RunformBundle_es_US.properties
    File does not exist: /oracle/PROD01/apps/apps_st/comn/java/classes/oracle/ewt/alert/resource/AlertBundle_es_US.class


    Looking this way, we get only to/oracle/PROD01/apps/apps_st/comn/java/classes/oracle /.

    We operate on eBusiness 12.0.4 with 10 G database 10.2.0.4, all this in the CARS

    Published by: IvanBalVe on August 3, 2012 12:11

    The main problem is that there is no patch for 64-bit RHEL.

    How can proceed us in this case, can we simply apply the Spanish or linux x 86?

    Thank you very much.

    Yes, if the 64-bit version is not available, you can apply the 32-bit version.

    If you have any languages installed, you can also apply NLS patches.

    Thank you
    Hussein

  • Failure to the final control of Oracle CRS stack. 10 on the first node.

    Hello world

    I tried to install a RAC Oracle 10 g on Oracle Enterprise Linux AS release 4 2 (October 7 update), but I'm having this problem

    root@fporn01 crs #./root.sh
    Check to see if Oracle CRS stack is already configured

    Set the permissions on OCR backup directory
    Setting up NS directories
    Configuration of the Oracle Cluster registry upgraded successfully
    clscfg: version Setup detected EXISTING 3.
    clscfg: version 3 is 10 G Release 2.
    Award of fporn01 default hostname for node 1.
    Award of fporn02 default hostname for node 2.
    Successfully accumulated necessary OCR keys.
    Using the ports: CSS = 49895 49896 EVMC = SRC = 49898 and EVMR = 49897.
    < nodenumber > node: nodename > < private interconnection name > < hostname >
    node 1: fporn01 fporn01-priv fporn01
    node 2: fporn02 fporn02-priv fporn02
    clscfg: Arguments help you get success.

    NO KEYS WERE WRITTEN. Power - setting force to override.
    -force is destructive and will destroy any previous cluster
    Configuration.
    Oracle Cluster registry cluster has already been initialized
    Startup will be queued to init within 90 seconds.
    Adding to inittab demons
    Expected CRS demons to be in place within 600 seconds.
    Failure to the final control of Oracle CRS stack.
    + 10 +.

    Forget the names!

    but on the second node everything went well, so I don't know that this is not a connectivity problem.
    the iptables service is stopped and disabled
    check the results after you run the root.sh script

    root@fporn02 ~ # /u01/app/crs/root.sh
    Check to see if Oracle CRS stack is already configured
    + / etc/oracle does not exist. Create now. +

    Set the permissions on OCR backup directory
    Setting up NS directories
    Configuration of the Oracle Cluster registry upgraded successfully
    clscfg: version Setup detected EXISTING 3.
    clscfg: version 3 is 10 G Release 2.
    Award of fporn01 default hostname for node 1.
    Award of fporn02 default hostname for node 2.
    Successfully accumulated necessary OCR keys.
    Using the ports: CSS = 49895 49896 EVMC = SRC = 49898 and EVMR = 49897.
    < nodenumber > node: nodename > < private interconnection name > < hostname >
    node 1: fporn01 fporn01-priv fporn01
    node 2: fporn02 fporn02-priv fporn02
    clscfg: Arguments help you get success.

    NO KEYS WERE WRITTEN. Power - setting force to override.
    -force is destructive and will destroy any previous cluster
    Configuration.
    Oracle Cluster registry cluster has already been initialized
    Startup will be queued to init within 90 seconds.
    Adding to inittab demons
    Expected CRS demons to be in place within 600 seconds.
    CSS is active on these nodes.
    fporn02
    CSS is not active on these nodes.
    fporn01
    Node local verification.
    Run the root.sh on the remaining nodes script to start the demons of the CRS.

    It is the newspaper of crs on the first node

    root@fporn01 bin # cat /u01/app/crs/log/fporn01/alertfporn01.log
    + 17:27:37.695 + 2009-06-24
    customer (9045) CRS-1006: / u02/oradata/orcl/OCRFile_mirror location of the OCR is inaccessible. Details in u01/app/crs/log/fporn01/client/ocrconfig_9045.log.
    + 17:27:37.741 + 2009-06-24
    customer (9045) CRS-1001: OCR has been formatted using version 2.
    + 17:28:24.544 + 2009-06-24
    customer (9092) CRS - APB - rac configured with nodes fporn01 fporn02 1801:Cluster.

    It is the newspaper of crs on the second node

    root@fporn02 ~ # cat /u01/app/crs/log/fporn02/alertfporn02.log
    + 18:09:09.307 + 2009-06-24
    CSSD (16991) CRS - 1605:CSSD file to vote is online: / u02/oradata/orcl/CSSFile. Details in u01/app/crs/log/fporn02/cssd/ocssd.log.
    + 18:09:09.307 + 2009-06-24
    CSSD (16991) CRS - 1605:CSSD file to vote is online: / u02/oradata/orcl/CSSFile_mirror1. Details in u01/app/crs/log/fporn02/cssd/ocssd.log.
    + 18:09:09.310 + 2009-06-24
    CSSD (16991) CRS - 1605:CSSD file to vote is online: / u02/oradata/orcl/CSSFile_mirror2. Details in u01/app/crs/log/fporn02/cssd/ocssd.log.
    + 18:09:12.441 + 2009-06-24
    CSSD (16991) CRS - 1601:CSSD complete Reconfiguration. Active nodes are fporn02.

    I rechecked the remote access / user equivalence

    After execution of the command here OCRCHECK have this information

    root@fporn01 bin #. / ocrcheck
    Status of the Oracle Cluster registry is:
    Version: 2
    Total space (in kilobytes): 262144
    Used space (in kilobytes): 312
    Amount of available space (KB): 261832
    ID: 255880615
    Device/file name: / u02/oradata/orcl/OCRFile
    Verifying the integrity of file/device succeeded
    Device/file name: / u02/oradata/orcl/OCRFile_mirror
    Verifying the integrity of file/device succeeded

    Checking cluster registry integrity succeeded

    on the second node, I get the same result

    root@fporn02 bin #. / ocrcheck
    Status of the Oracle Cluster registry is:
    Version: 2
    Total space (in kilobytes): 262144
    Used space (in kilobytes): 312
    Amount of available space (KB): 261832
    ID: 255880615
    Device/file name: / u02/oradata/orcl/OCRFile
    Verifying the integrity of file/device succeeded
    Device/file name: / u02/oradata/orcl/OCRFile_mirror
    Verifying the integrity of file/device succeeded

    Checking cluster registry integrity succeeded

    I have reviewed the following metalink notes, but none of them seem to solve my problem

    * 344994.1*
    * 240001.1*
    * 725878.1*
    * 329450.1*
    * 734221.1*

    I made a low of research from many forums, but failure is always on the second node, but my failure is on the first node.
    I hope someone could help me.

    It's the output of cluvfy

    Conducting due diligence to install cluster services

    Audit accessibility of node...

    Check: Accessibility of node of the node 'fporn01 '.
    Accessible destination node?
    ------------------------------------ ------------------------
    fporn01 Yes
    fporn02 Yes
    Result: Check accessibility node from node 'fporn01 '.

    Verify the equivalence of the user...

    Check: Equivalence of the user for the user 'oracle '.
    Comment by node name
    ------------------------------------ ------------------------
    fporn02 spent
    fporn01 spent
    Result: Use equivalence CONTROL passed to user 'oracle '.

    Checking administrative privileges...

    Check: Existence of user 'oracle '.
    User name of node are comments
    ------------ ------------------------
    fporn02 Yes
    fporn01 Yes
    Result: Use CONTROL existence increased for 'oracle '.

    Check: Existence of group 'oinstall '.
    Name of node status group ID
    ------------ ------------------------
    fporn02 is 501
    fporn01 is 501
    Result: Check existence for "oinstall" group

    Check: The user 'oracle' in group 'oinstall' primary members
    Name of node user is group is user in the main group comment
    ---------------- ------------
    fporn02 Yes Yes Yes Yes past
    fporn01 Yes Yes Yes Yes past
    Result: Membership check for user 'oracle' in group 'oinstall' as primary past.

    Past check administrator privileges.

    Verify node connectivity...

    Interface of the node information to "fporn02".
    IP address subnet of the interface name
    ------------------------------ ----------------
    eth0 10.218.108.245 10.218.108.0
    eth1 192.168.1.2 192.168.1.0

    Interface of the node information to "fporn01".
    IP address subnet of the interface name
    ------------------------------ ----------------
    eth0 10.218.108.244 10.218.108.0
    eth1 192.168.1.1 192.168.1.0
    eth2 172.16.9.210 172.16.9.0

    Check: Subnet node connectivity "10.218.108.0."
    Source Destination connected?
    ------------------------------ ----------------
    fporn02:eth0 fporn01:eth0 Yes
    Result: Verification of node connectivity for subnet "10.218.108.0" with one or more nodes fporn02, fporn01.

    Check: Subnet node connectivity "192.168.1.0.
    Source Destination connected?
    ------------------------------ ----------------
    fporn02:eth1 fporn01:eth1 Yes
    Result: Verification of node connectivity for subnet "192.168.1.0" with one or more nodes fporn02, fporn01.

    Check: Subnet node connectivity "172.16.9.0."
    Result: Verification of node connectivity for subnet "172.16.9.0" with one or more nodes fporn01.

    Interfaces adapted for private interconnection on the subnet "10.218.108.0":
    fporn02 eth0:10.218.108.245
    fporn01 eth0:10.218.108.244

    Interfaces adapted for private interconnection on the subnet "192.168.1.0":
    fporn02 eth1:192.168.1.2
    fporn01 eth1:192.168.1.1

    ERROR:
    Could not find an appropriate interface for the VIP range.

    Result: The node connectivity test failed.

    Check the system requirements for 'Sir '...

    Check: Total memory
    Name of node available comment required
    ------------ ----------
    fporn02 7,93 GB (8310276 KB) 512 MB (524288 k) transmitted
    fporn01 7,93 GB (8310276 KB) 512 MB (524288 k) transmitted
    Result: The total past memory check.

    Check: Disk space in "/ tmp" dir
    Name of node available comment required
    ------------ ----------
    fporn02 9.57 GB (10037300 KB) 400 MB (409600 KB) transmitted
    transmitted fporn01 GB 9.55 (10012168 KB) 400 MB (409600 KB)
    Result: Check the free space on the disc passed.

    Check: Swap space
    Name of node available comment required
    ------------ ----------
    fporn02 from 1 GB (1048576KB) of 8,81 GB (9240568KB)
    fporn01 from 1 GB (1048576KB) of 8,81 GB (9240568KB)
    Result: Checking space last Swap.

    Control: System Architecture
    Name of node available comment required
    ------------ ----------
    fporn02 i686 i686 spent
    fporn01 i686 i686 spent
    Result: Audit had system architecture.

    Control: Kernel Version
    Name of node available comment required
    ------------ ----------
    2.6.9 - 2.4.21 - 15EL spent 78.0.0.0.1.ELhugemem fporn02
    2.6.9 - 2.4.21 - 15EL spent 78.0.0.0.1.ELhugemem fporn01
    Result: Last kernel version control.

    Check: Existence of package for 'do-3, 79 '.
    Name of State comment node
    ------------------------------ ----------------
    fporn02 make-3, 80 - 7.EL4 spent
    fporn01 make-3, 80 - 7.EL4 spent
    Result: Package checking for 'do-3, 79 '.

    Check: Existence of package for ' binutils - 2.14.
    Name of State comment node
    ------------------------------ ----------------
    binutils - 2.15.92.0.2 - 25 fporn02 spent
    binutils - 2.15.92.0.2 - 25 fporn01 spent
    Result: Package checking for ' binutils - 2.14.

    Check: Existence of package for "gcc - 3.2.
    Name of State comment node
    ------------------------------ ----------------
    fporn02 gcc - 3.4.6 - 10.0.1 spent
    fporn01 gcc - 3.4.6 - 10.0.1 spent
    Result: Package checking for "gcc - 3.2.

    Check: Existence of package for ' glibc - 2.3.2 - 95.27.
    Name of State comment node
    ------------------------------ ----------------
    fporn02 glibc - 2.3.4 - 2.41 spent
    fporn01 glibc - 2.3.4 - 2.41 spent
    Result: Package checking for ' glibc - 2.3.2 - 95.27.

    Check: Existence of package for "compat-db - 4.0.14 - 5.
    Name of State comment node
    ------------------------------ ----------------
    past fporn02 compat - 4.1.25 - DB9
    past fporn01 compat - 4.1.25 - DB9
    Result: Package checking for "compat-db - 4.0.14 - 5.

    Check: Existence of package for "compat-gcc-7, 3 - 2.96.128.
    Name of State comment node
    ------------------------------ ----------------
    lack of fporn02 failed
    lack of fporn01 failed
    Result: Failure of the existence Package control for "compat-gcc-7, 3 - 2.96.128.

    ++ Check: package of existence "compat-gcc-c++ - 7.3 - 2.96.128" ++
    Name of State comment node
    ------------------------------ ----------------
    lack of fporn02 failed
    lack of fporn01 failed
    ++ Result: failure of packet existence check for "compat-gcc-c++-7, 3 - 2.96.128. ++

    ++ Check: package of existence "compat-libstdc ++ - 7, 3 - 2.96.128" ++
    Name of State comment node
    ------------------------------ ----------------
    lack of fporn02 failed
    lack of fporn01 failed
    ++ Result: failure of packet existence check for "compat-libstdc ++ - 7, 3 - 2.96.128. ++

    ++ Check: package of existence "compat-libstdc ++ - devel-7, 3 - 2.96.128" ++
    Name of State comment node
    ------------------------------ ----------------
    lack of fporn02 failed
    lack of fporn01 failed
    ++ Result: failure of packet existence check for "compat-libstdc ++ - devel-7, 3 - 2.96.128. ++

    Check: Existence of package for "openmotif - 2.2.3.
    Name of State comment node
    ------------------------------ ----------------
    openmotif - 2.2.3 - 10.2.el4 spent fporn02
    openmotif - 2.2.3 - 10.2.el4 spent fporn01
    Result: Package checking for "openmotif - 2.2.3.

    Check: Existence of package for "setarch - 1.3 - 1.
    Name of State comment node
    ------------------------------ ----------------
    fporn02 setarch-1, 6-1 adopted
    fporn01 setarch-1, 6-1 adopted
    Result: Package checking for "setarch - 1.3 - 1.

    Check: Existence of group for "dba".
    Name of State comment node
    ------------ ------------------------
    fporn02 are past
    fporn01 are past
    Result: Check group existence for "dba".

    Check: Existence of group 'oinstall '.
    Name of State comment node
    ------------ ------------------------
    fporn02 are past
    fporn01 are past
    Result: Check existence for "oinstall" group

    Check: Existence of user "nobody".
    Name of State comment node
    ------------ ------------------------
    fporn02 are past
    fporn01 are past
    Result: Use existence CONTROL passed to "nobody".

    Failure of the system requirements for 'Sir '.

    Check prior to the installation of cluster service failed on all nodes.

    We thank you for your comments ;)

    If you advise/etc/inittab file... don't ' forget to uncomment (that's run when the system starts)

    #h1:35:respawn:/etc/init.d/init.evmd run > / dev/null 2 > & 1
    fatal #h2:35:respawn:/etc/init.d/init.cssd > / dev/null 2 > & 1
    #h3:35:respawn:/etc/init.d/init.crsd run > / dev/null 2 > & 1

    TO

    H1:35:respawn:/etc/init.d/init.evmd run > / dev/null 2 > & 1
    H2:35:respawn:/etc/init.d/init. Fatal CSSD > / dev/null 2 > & 1
    H3:35:respawn:/etc/init.d/init.crsd run > / dev/null 2 > & 1

    By the way... Have fun and take advantage of Oracle RAC ;)

  • I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

    I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

    I tried the holding of 'command-r' and 'option' to see if the problem can be resolved or try any boot from a boot disk, my old backup, USB function start - but after a slow long process it all just stops.

    There is software on my HD that I don't want to lose by simply reformatting the computer, because I am now in a different country, far from my house, which is another problem of the Apple Store, to reinstall my OS from Yosemite on the www.

    Hey AmnonMikeCohen,

    Thank you for being a part of the communities of Apple Support.

    I understand that your Mac is not start properly after the power went out.  Let's start with resetting the SMC and NVRAM on your Mac and see if he can start from there:

    Reset the management system (SCM) controller on your Mac.

    How to reset the NVRAM on your Mac.

    See you soon.

  • Make a right-click on a group in the sidebar of contacts don't offer not the option "group load in the sidebar."

    I use this option to deselect some addresses in the group. Updated Thunderbird, this option disappeared. I tried to uninstall and reinstall the different versions of Thunderbird without result. 24.6 24.7, 31.3 I think version 38.2 is the one that he put to update it when the opportunity went. No no not this option makes me do a lot of extra work. Any help will be appreciated. Thanks for your time.

    You probably have one of these modules that allows you to remove contacts from a mailing list:

    ADDEXPANDEDLIST

    https://freeshell.de//~kaosmos/index-en.html#explist

    PopMailListRecipients

    https://addons.Mozilla.org/en-us/Thunderbird/addon/popmaillistrecipients/

    If none of them does not work with your version of TB, there is another method to achieve the same effect.

Maybe you are looking for

  • 10.7.5 upgrade 10.9 (or higher)

    Hi, I'm running on an OS X 10.7.5 and upgrade to a 10.9 or above an application I want to download. How is the best way to do it? I have 12 GB of memory.

  • the app icon disappeared

    one of the applications I installed (and can run from the market or research) on the zte open c (ebay) no longer has an icon on one of the home screens. This happened I tried to move the icon and somehow, it did not work. I don't know about the time

  • Distribution of LVOOP/FPGA-based application on several possible projects?

    SITUATION: I develop a large enough project that relies heavily on LVOOP: I encapsulated material-interaction and functionality in the classes of LV that are loaded at run time. I have different types of plug-ins that are interacting with each other

  • Lynksys E1200 head at 20 Mbit/s down - default settings

    Hello I learned that my router will never reach the 100 Mbps, but it is currently filling 20 Mbit/s. I have not changed a lot in the settings. Can anyone advise me on what parameters to set to get closer to this 100 Mbps? Is there a good link or yout

  • Why my iTunes cannot be updated? I have Windows 7, Internet 10, 64-bit Home Premium

    I have Windows 7, Internet 10, 64-bit Home Premium edition and my iTunes was working fine, but now it tells me to install the update and still, the installation fails.