Group hunting hides

Similar Questions

• Column group to hide

  Hello
  
  In the application, we used an array (of type "Advanced Table") and under that I need a column to get hidden in the table. When I navigate to see the columns via the link 'Customize' for the table, I got to know the column I need to be to hide is represented in the form of column group. And under this column group, it has a subcategory of may columns found under him.
  
  It will be ok if I hide only the required column under column group by setting the property to 'false' or do I have to hide the Group column full of itself?
  
  Advice needed...
  
  
  With our thanks,
  Trehout

  Please go by setting the property of the column to false (according to your features). To avoid any problems.

  If you see something suspicious, please let us know.

  Concerning
  Sumit

• Visibility of private groups

  HI -.

  Is it possible to allow private groups to appear on the page "explores"? It seems strange and problematic for me that a private group leads to make them disappear for everyone except members. I do not understand that you would not see the contents of a group, but hide its existence? This is problematic. Part of what we want to have with Socialcast to have people know what is happening in society and seek to participate in the things they can contribute to. This does not mean all the world should see everything, but they should at least know there are and the power of the application.

  By coincidence, there is an option on private groups that says "allow non-members, at the request of membership." As far as I know, there is no way to do it even if it is checked. If I am a non member, I can not see the group or even knowing that there is. How I apply for membership?

  It seems that the choice here is for all public and open, or have people to the community which is basically the flow of the business more things they are already member. In the latter case, how people explore what is happening in the community?

  Maybe I'm missing something.

  Geoff

  Thank you - for some reason, I couldn't get this working before but now I see that it is. Which solves the problem.

• Hide and see the variable

  There are two button radio, named A and B under the terms of the group_1.

  Also, there are two named C and D under group_2 radio button.

  4 subform of type form named S_1, S_2, S_3 S_4.

  If click on C with A, only showed S_1, S_2 subform.

  If click on C with B, only showed S_2, S_3 subform

  Once again

  If click on D with A, only showed S_1, S_3 subform.

  If click on D with B, only showed S_2, S_4 subform.

  In these circumstances, what is the code?

  Help, please...

  Hello

  In the click event of the radio button exclusion group.

  group_1 click the event in the exclusion group:

  // hide all subforms
  s_1.presence = "invisible";
  s_2.presence = "invisible";
  s_3.presence = "invisible";
  s_4.presence = "invisible";
  
  if (this.rawValue == "A" && group_2.rawValue == "C")
  {
       s_1.presence = "visible";
       s_2.presence = "visible";
  }
  else if (this.rawValue == "B" && group_2.rawValue == "C"){
       s_2.presence = "visible";
       s_3.presence = "visible";
  
  }
  else if (this.rawValue == "A" && group_2.rawValue == "D")
  {
       s_1.presence = "visible";
       s_3.presence = "visible";
  }
  else if (this.rawValue == "B" && group_2.rawValue == "D")
  {
       s_2.presence = "visible";
       s_4.presence = "visible";
  }
  

  group_2 Select the event in the exclusion group :

  // hide all subforms
  s_1.presence = "invisible";
  s_2.presence = "invisible";
  s_3.presence = "invisible";
  s_4.presence = "invisible";
  
  if (group_1.rawValue == "A" && this.rawValue == "C")
  {
       s_1.presence = "visible";
       s_2.presence = "visible";
  }
  else if (group_1.rawValue == "B" && this.rawValue == "C")
  {
       s_2.presence = "visible";
       s_3.presence = "visible";
  
  }
  else if (group_1.rawValue == "A" && this.rawValue == "D")
  {
       s_1.presence = "visible";
       s_3.presence = "visible";
  }
  else if (group_1.rawValue == "B" && this.rawValue == "D")
  {
       s_2.presence = "visible";
       s_4.presence = "visible";
  }
  

  Now in the test, I have "A", "B", "C" and "D", but you should replace the latter with the values specified for the option buttons (see object > Binding).

  Hope that helps,

  Niall

• Voicemail configuration base with CUCM and connections of the unit

  Hello again,

  I'm still very new to CUCM.  I am configuring a CUCMB 6.01 test deployment.  He has connections in the integrated unit.  I have 2 DNs assigned to users and Cisco IP phones.  I use MGCP (Cisco 3745 with 2FXO as gateway).  Now, I'm trying to extensions of voicemail installation for the users.  I read a lot of documentation on CUCM and unity, but I know that Unity Express is not what I need, and that you have not found information on the basics of implementing voicemail for users of CUCM.

  Users are DN 1001 and 1002 respectively.  They are part of a list of hunting (broadcast) so that the arrival of incoming calls, both phones will ring simultaneously.  Not sure if this has any bearing or not.  I would like to be able to put in place so that each DN rings on the IP phone say 6 times, then go to a Unity voicemail box configuration for that user.  I have already imported users 2 in the unit.  I ran the voice messaging port configuration wizard.  Everything looks as if it runs correctly, but I'm stuck really share say CUCM to route the call to the mailbox of the unit.  Probably the simplest part.  Ideas or help on this would be much appreciated.  Thank you in advance.

  Impetuous salvation,

  CUCM works this way

  So the fact that 1001 and 1002 receive calls via a group has a significant impact on this config.

  You must keep in mind that a call that is routed through the fighter pilot will always ignore the CFWD settings on phones of hunting member of the group. The normal way to control it then is through disconnection of the Group Hunt members phones combined with the front fighter pilot level settings.

  The following section describes how the parameters to call it forward on the phones of individual members Hunt are ignored when presented a call via the hunting feature. Here's a clip;

  Hunting and call forwarding

  The concept of hunting differs from call forwarding. Hunting allows Cisco Unified Communications Manager to extend a call to one or more lists of numbers, where each such list can specify an order of hunting which is selected from a fixed set of algorithms. When a call extends over a part of hunting of these lists and the party does not answer or is busy, hunting resumes from the next part of hunting. (The next party of hunting varies according to the current hunting algorithm). Hunting has so ignore settings call forward No Answer (CFNA), call forward busy (CFB) or call before all (CFA) for the party to attempt (group member line phones).

  Cisco Unified Communications Manager offers the possibility to redirect a call when hunting fails (that is, when the hunt ends without a part of hunting to the respondent, due either to exhaust the list of numbers of hunting is to expire). If used, this final redirection includes an automatic call forwarding action. Therefore, the fighter pilot Configuration window includes call forwarding configuration concepts which are similar to those found on the directory number Configuration window.

  Example of a call hunt

  Although hunting is different from the transfer, Hunt often develops as a call that gets forwarded to a certain number of fighter-pilot. The protective cover of appeal extends from hunting to allow the final drive after two exhausts of hunting or expires.

  A typical call calling hunting can include the following phases:

  The appeal of hunting through groupings of posts set up according to the algorithms implemented for each group. Hunting is successful (if it meets a hunting party), exhausts (if all parts of hunting are tempted, but no response), or expires (if the deadline set by the Maximum hunting timer runs out before that all parties are tempted, and none of the parties who have tried to answer).

  For the purpose of this example, we assume that hunting does not succeed.

  If a form any of the final drive is configured, the call forward for a next destination; otherwise, the call is released.

  Maximum hunting timer

  The Maximum Hunt Timer field on fighter pilot Configuration window allows the administrator to enter a value (in seconds) to limit the hunting through a list of hunting season. After gaps in the time specified, if hunting was not successful, the call is transferred to a voicemail system, a specific compound number, or some personal treatment (if configured) or the call is released.

  The good doc.

  http://www.Cisco.com/en/us/docs/voice_ip_comm/CUCM/Admin/6_0_1/ccmsys/a03rp.html#wp1078922

  If the call goes unanswered or all Member phones are disconnected, then an attacker needs to be applied at the level of the "fighter pilot".

  Hunt the settings forward

  Before hunting without an answer - when did not answered the call which is distributed through the list of hunting at a specific time, this field specifies how to transfer the call.

  Destination this parameter contains the number of the directory to which calls are forwarded.

  Before busy hunt - when the call which is distributed through the list of hunting is busy at a precise moment, this field specifies how to transfer the call.

  Destination this parameter contains the number of the directory to which calls are forwarded.

  Maximum Timer Hunt - enter a value (in seconds) that specifies the maximum duration for hunting. (Used in conjunction with Forward busy hunting)

  In your case, it is best to configure the DN of a fighter pilot in the extension of alternatives under the 1001 and 1002

  mailbox.

  I hope this helps!

  Rob

• SIP Dialer with voice gateway using the FXO Ports

  Hello

  We have a laboratory UCCE consisting of an outgoing SIP dialer and a h323 2811 voice modem router with 2 FXO ports. The Dialer reserve an agent and sending the call to the bridge, but the call fails immediately with the bridge return a "404 not found" error to the Dialer. Call directly from a CUCM extension attempts to connect successfully through the FXO. Any thoughts?

  IOS Ver - T4 15.1 (3)

  UCCE worm - 8.5.4

  The gateway configuration:

  version 15.1
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  sequence numbers service
  !
  hostname LAB-RS-ING_VXML-GW
  !
  boot-start-marker
  boot-end-marker
  !
  !
  logging buffered 50000000
  no logging monitor

  !
  No aaa new-model
  no location network-clock-participate 1
  !
  voice-card 0
  !
  voice-card 1
  dspfarm
  !
  dot11 syslog
  IP source-route
  !
  !
  IP cef
  !
  !
  !
  IP host mediaserver 10.15.80.83
  No ipv6 cef
  Authenticated MultiLink bundle-name Panel
  !
  !
  !
  !
  !
  !
  Circuits-port FXO group
  hunting-sequential diagram
  !
  !
  !
  voip phone service
  No IP trust to authenticate
  h323 connections allow h323
  allow connections h323 to SIP
  allow connections sip h323
  allow sip to sip connections
  no service additional sip refer
  service additional media - renegotiate
  signs before any
  H323
  Modem passthrough codec g711ulaw nse
  SIP
  interface FastEthernet0/0 source control binding
  bind media source interface FastEthernet0/0
  header-passage
  !
  voice class codec 1
  g711ulaw codec preference 1
  preferably 5 codec g729r8
  !
  vocal h323 class 1
  H225 timeout tcp establish 3
  !
  !
  !
  !
  translation-article 99 of the voice
  rule 1 / ^ 4 / /334/
  !
  !
  voice translation-profile PROFILE_TO_CVP
  translate called 99
  !
  !
  Crypto pki token removal timeout default 0
  !
  !
  !
  !
  Archives
  The config log
  hidekeys
  !
  !
  !
  !
  !
  !
  !
  interface Loopback0
  255.255.255.255 IP address 172.20.1.1
  !
  interface FastEthernet0/0
  IP 255.255.255.0
  automatic duplex
  automatic speed
  !
  interface FastEthernet0/1
  IP 255.255.255.0
  Shutdown
  automatic duplex
  automatic speed
  !
  !
  Router eigrp 15
  10.0.0.0 network
  Auto-resume
  !
  IP forward-Protocol ND
  !
  no ip address of the http server
  no ip http secure server
  !
  IP route 0.0.0.0 0.0.0.0 10.x.x.x
  !
  !
  !
  !
  control plan
  !
  !
  voice-port 0/0/0
  Ports FXO 1 trunk group
  surveillance cut dualtone Mid-communication
  output attenuation - 3
  no echo - cancel enable
  No non-linear
  No vad
  broadcast-maximum: 250
  broadcast / nominal 200
  minimum of playout / high-delay
  broadcast-delay mode fixed
  call waiting times - disconnect 5
  timeouts wait-version 5
  connection ÉRA 4930
  4930 description
  !
  voice-port 1/0/0
  2 ports FXO trunk-group
  surveillance cut dualtone Mid-communication
  output attenuation - 3
  no echo - cancel enable
  No non-linear
  No vad
  broadcast-maximum: 250
  broadcast / nominal 200
  minimum of playout / high-delay
  broadcast-delay mode fixed
  call waiting times - disconnect 5
  timeouts wait-version 5
  connection ÉRA 4198
  4198 description
  !
  voice-port 0/0/2
  !
  voice-port 0/0/3
  !
  !
  !
  profile MGCP default
  !
  !
  voice POTS dial-peer 1
  incoming called-number.
  direct line to inside
  !
  Dial-peer voice 2 voip
  session protocol sipv2
  incoming called-number.
  codec voice-class 1
  no class voice sip reset timer expires 183
  DTMF-relay h245 alphanumeric
  No vad
  !
  Dial-peer voice voip 4198
  destination-model 4198
  session target ipv4:10.15.80.81
  codec voice-class 1
  h323 voice-class 1
  voice-class sip rel1xx taken in charge "100rel.
  no class voice sip reset timer expires 183
  DTMF-relay h245 alphanumeric
  No vad
  !
  voice pots Dial-peer 301
  trunkgroup FXO Ports
  Description * MIA local calls *.
  destination-model 305 [2-9]...
  alert progress_ind activate 8
  progress_ind enable progress 8
  direct line to inside
  prefix 305
  !
  Dial-peer voice voip 4930
  destination-model 4930
  session target ipv4:10.15.80.81
  codec voice-class 1
  h323 voice-class 1
  voice-class sip rel1xx taken in charge "100rel.
  no class voice sip reset timer expires 183
  DTMF-relay h245 alphanumeric
  No vad
  !
  Dial-peer voice voip 7000
  Description of Agents
  destination-model 7...
  session protocol sipv2
  session target ipv4:10.15.80.81
  codec voice-class 1
  voice-class sip rel1xx taken in charge "100rel.
  no class voice sip reset timer expires 183
  !
  Dial-peer voice voip 9999
  Phone agent test description
  destination-model 9999
  session protocol sipv2
  session target ipv4:10.15.80.81
  codec voice-class 1
  voice-class sip rel1xx taken in charge "100rel.
  !
  Dial-peer voice voip 1444
  Phone agent test description
  destination-model 1444
  session protocol sipv2
  session target ipv4:10.15.80.81
  codec voice-class 1
  voice-class sip rel1xx taken in charge "100rel.
  !
  voice pots Dial-peer 303
  trunkgroup FXO Ports
  Description * LD calls *.
  destination-pattern 1 [2-9]...
  alert progress_ind activate 8
  progress_ind enable progress 8
  direct line to inside
  Forward-digit 11
  1 prefix
  !
  voice pots Dial-peer 302
  trunkgroup FXO Ports
  Description * MIA local calls *.
  destination-model 786 [2-9]...
  alert progress_ind activate 8
  progress_ind enable progress 8
  direct line to inside
  prefix 786
  !
  voice pots Dial-peer 9
  destination-model 91 [2-9]...
  alert progress_ind activate 8
  progress_ind enable progress 8
  direct line to inside
  port 0/0/0
  Forward-digit 11
  !
  !
  Dial-peer voice 1400 voip
  Description of Agents
  destination-model 14...
  session protocol sipv2
  session target ipv4:10.15.80.81
  codec voice-class 1
  voice-class sip rel1xx taken in charge "100rel.
  !
  !
  !
  !
  !
  Line con 0
  line to 0
  line vty 0 4
  opening of session
  transport of entry all
  !
  No Scheduler allocate
  end

  Do you have installation trunks in call to the dialer Manager?

• By selecting the buttons "through" other objects

  This makes me crazy... especially because I'm sure it'll turn out to be something incredibly simple...

  I created a few 'pop ups' using a smartshape, legend text, an image and a button and them grouped.  The groups are hidden when the entrance to the slide, they are displayed by selecting the corresponding button on the page, and are hidden by the button in the group.

  The problem is that when I have these groups 'show' on the page that I have them set up so that they cover the buttons on the page... so the learner needs re - hide the group before showing another.  But it seems that when I try to select the button within the group to hide this group, instead it is by selecting the button in the same place, but 'below' of the group.  I checked all my orders, three times, and all the button functions are correctly configured.  In addition, groups are placed above the buttons of the page on the timeline.

  I've only tested using the option "Preview"... I have not published to see if the same thing happens in the final product.

  Any ideas on what I'm missing?

  Thank you.

  Jay

  Never have two interactive objects in the same place at the same time is

  my bike. At least, you must disable the buttons under those that are

  active.

  On February 25, 2016 12:55, "[email protected]" [email protected]>

• Darken the sky

  I just upgraded to 12 items for photoshop cc - 12 that I could select an area of the sky and then using select quick editing under the nature or darken; Thinning or add color to a sky for example - how can I do that in CC?

  Thank you

  Rob

  Photoshop is not the "Quick Edit" making elements.  It's the kind of difference.

  Change the appearance of something like a sky can be made almost an infinite number of ways in PS.  As JJ mentions above, adjustment layers would be a good start.  I would recommend levels or curves to darken it.  Curves is more complicated, but gives you more control.  And then a layer of color hue/saturation.  You will notice that it will affect the entire image.  Then go to the layer mask (it will be a white rectangle to start) and black paint over the areas that you don't want changed.  There are better ways to hide areas, but it is a lesson in itself.

  Edit: Once you get the mask if you wish you can drag this mask on the other adjustment layers so that they have the same mask.  I always forget the shortcut, but it's ctrl or ALT.  Or, you can group all the settings, and then put a mask over the Group and hide all together.

• Book and conditional text Tags file do not match

  With Framemaker 10 (CT 3, Windows 7 64-bit), when I click on a document in a book (& view > show/hide conditional text), there is no such thing as an additional conditional text tag that appears in the text document show/hide conditional.

  For example:

  1. In the book, My Book.book, I select Chapter1.fm (but do not open).
  2. Then I opened the group Show/Hide conditional text (view > show/hide conditional text)
  3. I see these two tags, text to hide and HideTextcondition. I use text hide but not HideText.
     • Apparently, at some point, I changed the name of the condition tag.
  4. I have to open Chapter1.fm.
  5. When I open the Panel of text show/hide conditional , HideText is not there.

  What I want to do is to remove HideText (that I don't use), but I can't find how to court. any ideas out there?

  A little more information that might help to understand what is happening:

  1. I select Chapter1.fm in the book.
  2. Then I select view according to the condition in the group Show/Hide conditional text .
  3. Select the hide field HideText .
  4. Click the left arrow (<-) to move the field to display HideText .
  5. Click apply.
  6. I get this error message in the book error log:
  • Cannot display the following tags because they do not exist in the present document

  So, can someone tell me how to get rid of HideText from files of the book?

  Thank you!

  John N.

  John,

  With only the open book file, even if one of its documents is selected, the show/hide box lists all the conditions in the book. The error message says you that the selected document does not have this tag. Thus, some other documents in the book has the label or that you think that you have changed the name in the past and he is still in the book file to.

  So first, I'd follow the suggestiong of Sheila #4. Save the BOOK as mif. Open the mif with a text editor. Search for the following sequence of lines:

  <>

  .

  .

  .

  > end # ConditionCatalog

  Remove these lines and save the file. Now open the mif file in FrameMaker and save it as a FrameMaker book (in the record dialog, don't forget to remove the string ".mif" at the end of the file name or image will complain). The book was updated. FrameMaker will then create a new catalog of condition in the book based on conditions in the files of the book.

  If the condition is still there, then you need to find the document that contains still. You can use the Find function to search for conditional text with just this condition.

  Van

• Mask problem

  Hello!

  I'm hiding a picture with a rectangle in a group container.

  This is the code:

  < s:Group id = "hide" >

  < s:Rect id = "rectCard" radiusX = "10" radiusY = "10" width = "247" height = "156" >

  < s:fill >

  < s:SolidColor color = "#AEDFE4" / >

  < / s:fill >

  < s:stroke >

  < color = weight of the '#ACBFC1' s:SolidColorStroke = '1' caps = "round" joints = "round" / >

  < / s:stroke >

  < / s:Rect >

  < / s:Group >

  < mx:Image id = "imgUserPic" width = "247" height = '156' maintainAspectRatio = "true" = "true" smoothBitmapContent = "true" scaleContent mask = "{mask}" / >

  The mask works, but I get a warning about data binding will not be able to detect assignments to hide.

  How can I fix this please?

  Hello

  Just change the id to something that is not a keyword, for example myMask or _mask

  David.

• Masks in catalyst?

  Hello

  
  is it possible to create masks in the latest version of Catalyst? For example, to create a simmiliar UI to the 'Adobe Max Desktop Widget.

  Welcome, Nico

  Hi Nico,

  Glad to hear that you were at MAX. You cannot create a mask directly in the current version of the catalyst, but you can import works of PS or AI that has a mask. If you have existing objects (components, for example) that you want to hide, follow these steps:

  1. create a mask to the PS or the ACE. If you use PS, then a vector mask.

  2 import. it. If you use PS, you should choose "shape layers > keep editable" in the import dialog box.

  3. in the layers panel, you will see a group with your content hidden inside. Will what's inside this group be hidden.

  4. you can drag objects created in the catalyst in the group to hide.

  How is that intuitive! = p. obviously, it's something we're looking to improve in future versions.

  -Adam

• Illustrator has a feather, degraded as InDesign tool?

  CS4... I know it must be here somewhere, I know the tool broken down in InDesign but does in Illustrator.  I see the normal pen, but it seems just to soften the edges.  I need to start full-on one end and fade out at the other end

  Illustrator can do everything as well as InDesign transparency pen. Better, in fact. But the interface for doing so is complicated and has long been one of the most asked questions about the forum. Search the opacity mask in the help files. Basically, you first create a gradient, gradient mesh or a number of different shades of gray, which are then grouped objects with fills. This object or group is placed above the object, picture, or group to hide and make you the opacity mask in the transparency Panel.

  

• How can I hide the addresses in my list of contacts in specific group when I send an e-mail to this group?

  How can I hide the addresses in my list of contacts in specific group when I send an e-mail to this group?  I don't want to have all email addresses

  made available to everyone in the group.

  Thank you!

  You use Windows Mail? The bold at the bottom is the party concerned.
   
  You can also create groups if you send e-mail to the same people often.
   
  You can create a single group name (or alias) to use when sending a message to several contacts at the same time. Just create a group name and add individual contacts to the group. Then just type the name of the group in the box for when you send mail.
   
  1. in the address book, select the folder in which you want to create a group. Click New in the toolbar, and then click New Group.
  2. the Properties dialog box opens. In the group name box, type the name of the group.
  3. There are several ways to add people to the Group:
  a. to add a person from your address book list, click Select members, and then click a name in the address book list.
  (b) to add a person directly to the group without adding the name to your address book, type the person's name and e-mail address at the bottom of the Properties dialog box and then click Add.
  to add a person to both the Group and your address book, click New Contact and enter the appropriate information.
  (d) to use a directory service, click Select members, and then click search. Select a directory service in the drop-down list at the end of the text box. After finding and selecting an address, it is automatically added to your address book.
  4. Repeat for each addition until your group is defined.
   
  Note
   
  a. to view a list of your groups separately from the list of address book in the address book on the view menu, make sure that folders and groups is selected.
   
  b. you can create multiple groups, and contacts can belong to several groups.
   
  If you want to send to a group without addresses are displayed for each recipient, open the address book and make a new entry. Enter the name of the group in the area of the display, but use your address. (Some Internet service providers require a legitimate address in the line to and recipients will know it's from the Group).
   
  Click on the button to. Enter the name of the group using your address. Enter the group in the BCC field.
  

• Contact group list emails - need to hide the names of the recipient

  I have Vista Home Premium and use Windows Mail for consignments of the outgoing group.  I can't find a way to hide the names of the recipients and addresses on an outgoing group e-mail, using the contact list.  Is it possible to do, or is this just an intrinsic short entry when you use Windows Mail to group email contacts?  I have friends who use gmail, hotmail, etc., which seem to be able to do it for reasons of confidentiality.  My own e-mail address ends with "@bellsouth.net" thanks, Mark K.

  You ask the subject to create a group using a randomly message you want to send to multiple recipients using BCC or BCC?

  If the latter, either enable the BCC field in a new message window (view |) All headers), or click the To select the contacts in the list of contacts currently visible and add them to the BCC field.

  Bruce Hagen ~ MS - MVP [Mail]

• How can I hide some folders from start menu to certain groups of users on Windows 7?

  Our company has a record in our record system which Start Menu contains all the administrative and user management tools. Recently, we noticed that our other members of the staff (Standard users) can access this folder. It concerns us because the 'Administrators' folder contains Applications such as the command prompt and a shortcut to the center of disk management. Is there a way we can hide this folder in the Start Menu? Our employees are organized in groups that correspond to their service, in order to hide the folder from several groups of users would be helpful.

  Thank you

  Chris

  Do not put in the folder all USERS with access to... (C:\ProgramData\Microsoft\Windows\Start menu) and put only in the user profiles you want (C:\Users\\AppData\Roaming\Microsoft\Windows\Start Menu)

  Without other warranty in place, your users can simply press the LOGO WINDOWS + R and type CMD or diskmgmt.msc to do the same thing for the security of the solution of darkness here will help prevent tripping over.  Google is his friend for such things.  ;-)