Group missing in 834 EDI outgoing segments

Similar Questions

• Validation of EDI error: Segment GS (functional group header) to orientation

  Hello
  
  I'm working on the 272 EDI transaction (inbound).
  
  I created the ECS for the 272 EDI file and posted 272 EDI data with file ECS in the B2B document editor. Validation has been successful in B2B document editor
  
  When I download the same file of ECS and even tested in B2B. I use EDI version 4020.
  
  I get the following error,
  
  The position of guideline 0200 GS (functional group header) segment is missing. Standard option of this segment is mandatory. {br} {br} This segment was expected after: {br} {tab} Segment count: 1 {br} {tab} character: 105

  Hey riri,.

  You must change the data type of the particular element in the SCE itself.

  Kind regards
  Anuj

• EDI outgoing file name

  Hi Alain,
  
  When I test EDI X 12 834 outgoing, the generated file is in the format % From_party%_%unique_id%.dat. I'm not sure that the unique_id is the number ID or transaction message control, anyway it is a unique timestamp.
  
  My question is can I specify the name format for outgoing file? File name Convention is proposed recently. It is not compatible with the outgoing file name by default.
  
  Thank you
  NAFTA
  CGI

  Hi Alena,.

  I'm not sure that the unique_id is the number ID or transaction message control, anyway it is a unique timestamp.

  Yes, it's a unique id to the timestamp.

  My question is can I specify the name format for outgoing file?

  In your FILES/FTP/SFTP channel, you can specify the format of file name personalized (with some restrictions) in setting "filename Format". Please look for "Filename Format" here.

  http://docs.Oracle.com/CD/E23943_01/user.1111/e10229/b2b_tps.htm#BABBCDHI

  You can also consult the section "Files and Formats of directory name to override the default" in French.

  http://www.Oracle.com/technetwork/middleware/B2B-integrations/learnmore/tnb2b11g002-326857.PDF

  Kind regards
  Anuj

• How to replace the members of the Group missing redo log after the failure of a support

  Hello

  I'm testing a disk failure scenario.  I had recovery multiplexes on three sites (Windows drive letters) logs; one of the three locations also contained the data files.  I deleted the Windows player that contained data files and saw a restoring with RMAN.   All is well except that redo log members who are found on the occult Windows disk are of course still missing; the database opens, etc., but puts messages like this in the ALERT.log:

  ORA-00321: log thread 2 1, cannot update log file header
  ORA-00312: wire 2 1 online journal: ' F:\APP\NGORA12CR2SRV\ORADATA\ORATEST5\ONLINELOG\O1_MF_2_BW4B5MY0_. JOURNAL"

  
  

  What is the 'right' way to replace missing limbs?  Just get all the new groups of newspapers with new members on all three discs?  Carefully copy the LOG files representing missing members of one of the other sites?  I add new members at this location and remove existing members (missing)?

  
  

  Is how important it?

  
  

  Thank you!

  
  

  Martin
  

  See 'Recover after losing a member of a group of Redo Logs online multiplexed'

  at http://docs.oracle.com/cd/E11882_01/backup.112/e10642/osadvsce.htm#sthref2205

  Hemant K Collette

• Group missing user profile manager

  Server 4.0 on OSX 10.11.1 using.

  I have installation manager profile and work for our students by having the mac server running as the OD server with the profile as well as related to the AD Manager to allow users.  In the Profile Manager, I have a group called student that contains all the users of the student.  He works well with the Manager to set up profile settings to customize the user experience however I noticed today that 1 student shows is no longer as in the Group of students in the Profile Manager.  In two RFAS and editor of search on the mac Server directory the user shows as a member of the student group.

  I can't understand why this appears a user is no longer in the Group Manager profile when everything clearly shows them as a member.

  Problem has to do with LDAP on our Active Directory settings.  The MaxPageSize was too weak, as mentioned in Mac OS x: first 1000 results when querying Active Directory - Apple Support

• Group missing in Hangouts app messaging option

  I activated Hangouts as the default SMS App MMS works very well in the messaging application, but not in the meeting places. I picked him for the group option in the e-mail settings, but he's not here. (Tried to upload an image, but do not think that it works for me so a link to the image on my disk of google here)

  When I receive a MMS group in meeting places, the message appears under the individual sender so a convo between me and 3 other people eventually appear in three different threads between me and each of these persons. And my replies are sent by SMS for only the individual sender.

  It seems that the behavior that I would wait to not have this option checked e-mail group. The solution is simple - check this box. Enforcement is more difficult... for some reason that the option is not displayed.

  Any ideas?

  
  

• Customer VPN - client configuration isakmp crypto group missing

  Hello

  I have a 12.2 (7r) version running Cisco 2611XM

  I am trying to get the vpn clients to connect to the router following this link:

  http://www.Cisco.com/en/us/products/sw/secursw/ps2308/products_configuration_example09186a00801c4246.shtml

  My problem is that when I try to add the group I do not get the group option.

  That's what I get:

  My_Router (config) #crypto isakmp client configuration?

  network address Set for the client address pool

  What I need to change the version of IOS, if yes what IOS should I use?

  Any help is greatly appreciated. This is the show of the current router version

  Cisco Internetwork Operating System software

  (Tm) C2600 software IOS (C2600-IK9S-M), Version 12.2(17a), RELEASE SOFTWARE (fc1)

  Copyright (c) 1986-2003 by cisco Systems, Inc.

  Updated Friday 19 June 03 16:35 by pwade

  Image text-base: 0x8000808C database: 0x81280FF0

  ROM: System Bootstrap, Version 12.2 (7r) [next 7r], RELEASE SOFTWARE (fc1)

  My_Router uptime is 1 minute

  System to regain the power ROM

  System image file is "flash: c2600-ik9s - mz.122 - 17A .bin.

  This product contains cryptographic features and is under the United States

  States and local laws governing the import, export, transfer and

  use. Delivery of Cisco cryptographic products does not imply

  third party approval to import, export, distribute or use encryption.

  Importers, exporters, distributors and users are responsible for

  compliance with U.S. laws and local countries. By using this product you

  agree to comply with the regulations and laws in force. If you are unable

  to satisfy the United States and local laws, return the product.

  A summary of U.S. laws governing Cisco cryptographic products to:

  http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html

  If you need assistance please contact us by mail at

  [email protected] / * /.

  Cisco 2611XM (MPC860P) processor (revision 0 x 100) with 60416K / 5120K bytes of memory.

  Card processor ID JAE072602F2 (1616341861)

  M860 processor: Ref. 5, mask 2

  Connection software.

  X.25 software Version 3.0.0.

  2 FastEthernet/IEEE 802.3 interfaces

  2 network interfaces Serial (sync/async)

  32 KB of non-volatile configuration memory.

  32768 K bytes of processor onboard flash system (read/write)

  Configuration register is 0 x 2102

  Thank you

  Randall

  Randall,

  TAC is more an organization of break-fix. The question that you run by being more a features/functionality with the version of the code, TAC will probably able to help.

  Your best option is to upgrade the memory and upgrade the router to 12.3 Mainline or higher.

  Let me know if it helps.

  Kind regards

  Arul

• Local users and groups is missing from computer management

  I can't find the local users and groups folder in computer management. He is absent.

  Hello

  Advanced management tools are only available in the Windows 8 Pro version. It seems that you have the standard version of Windows 8. Windows and Windows 8 RT have local users and groups with disabilities.

  You can also check the wire and check.

  The local users and groups missing

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Pulse counter for display on seven segmant display

  I do not know how to progress this program to view the results on the display 7 segments.

  That's what I have so far (see attachment).

  This looks like a homework problem, but it is quite simple.  I can't view your file so I'm sorry if my information is duplicated.

  Create a 2D Boolean values that define what segments are lit for each number.

  0 line will contain the sequences to turn on a 0

  Line 1 will contain the sequences to turn on a 1

  etc.

  Creation of the screen:

  Create a group of Boolean values for 7-segment display.

  Add the cluster in a table by a number of figures.

  Use the quotient/remainder function to obtain a single value at the time and your table 2d figures for the good order of the index.  I let you discover the rest.

  

• keyword established

  I read the book from the PSAB SECUR by Lammle and there this config:

  access-list 110 tcp any refuse a Workbench

  Allow Access - list 110 tcp a whole

  the interface s0/0

  Access-group 110

  He says that this does not leave anyone "SYN" in the network, but I think it is the otherway autour. I'm sure this will help anyone outside of SYN, but never ACK or RST in the network, essentially denying traffic anyway.

  Am I wrong?

  You are right, Mr President.

  The first line denies all TCP packets have bits ACK or RST set (e.g. SYN + ACK, ACK, ACK + RST). He made friezer deny packets with only the SYN bit set.

  The second line allows TCP SYN requests!

  TCP traffic initiated from outside and the cabbage in reconciliation of the interface Serial0/0 will never be able to complete the three-way handshake to configure a session but the third part of the handshake is an incoming ACK, who deny this first line.

  So, indeed, all incoming TCP traffic will be refused, as you said.

  If the goal was to deny all incoming TCP traffic in the first place, it would take a single ACL line:

  access-list 110 tcp refuse a whole

  interface Serial0/0

  IP access-group 110 to

  And if the goal was to restrict the direction in which TCP sessions could be undertaken, a more useful ACL would be:

  access-list 110 permit tcp a whole Workbench

  access-list 110 tcp refuse a whole

  and apply it either entering:

  interface Serial0/0

  IP access-group 110 to

  or outgoing:

  interface Serial0/0

  IP access-group out 110

  Depending on where you want the sessions came from. (Assuming that there is no other ACL coming into play that affect the end of the three-way handshake).

  I hope this helps.

• Can you add a contact to the canvas of the campaign of the Builder program?

  I have a program that changes the owner of a contact and update in the CRM. I also want to then move them to a canvas of campaign. Is there an action step that allows me to do this? I don't see that add to the generator program options.

  Hi Krista,

  Unfortunately, there is no step generator program that can add a contact to the canvas of the campaign of the Builder program. However, you could use to add it to the stage of the Contact Group in the program generator and then use this group Shared Contact list in a segment to fuel a campaign.

• My LS model will mark each lead/contact in our case?

  I have created my lead scoring template and now want to start it. Our instance is shared among all of the business and as such, I want to just mark 'my' group of contacts. These contacts can be referenced in a group e-mail, shared filter or segment. I tried to create a program to add my members then pass them throught he head model rating but it doesn't seem to be an option to do so.

  Am I right in thinking that as soon as I activate the model LS every single contact/lead in our instance will be marked? If so, I need to find away around it, otherwise I won't be able to use... That would happen if we had several models of rating all present at the same time? Will there be several fields of contact on each contact record to store this information?

  My rating model is ready to go, and I really need to know how to start this and just score on my son. Any help would be greatly appreciated.

  Thank you

  Hannah

  the main rating model will run on all contacts... so you decide which group to look for market or update CRM with... it's when lists and filters come in the picture... If you don't want the entire database to be registered, you can still create a lead scoring program using program generator...

• Can you tell me...

  It is possible to configure a contact filter is based on a certain County where the contacts are not part of a specific group?

  Thank you

  Rashida

  Do you mean where they are not in a specific contact group? If so, then the answer is no--but that might be a nice feature to have Eloqua to consider.

  Instead of the contact group, if you meant in some 'segment' (i.e. of the County), then Yes, you could build a filter that says "count NO"has a value"= the Broward County, Orange County.

• ORA-03113: end of file on communication channel

  Help! I can't open the database, I get the error ora-03113

  Here is my trace file

  Fri Oct 08 22:37:15 2013

  ARC3 started with pid = 34, OS id = 3016

  ARC2: Started archiving

  Arc1: become the "no FAL' ARCH

  Arc1: become the "no SRL" ARCH

  ARC2: Become the heartbeat ARCH

  Errors in the e:\app\ABIGAIL\diag\rdbms\orcl\orcl\trace\orcl_lgwr_1952.trc file:

  ORA-00313: open failed for the members of the group log 1 of thread 1

  ORA-00312: thread 1 1 online journal: "E:\APP\ABIGAIL\ORADATA\ORCL\REDO1B."

  ORA-27041: could not open the file

  04002 - OSD: could not open the file

  S/O-error: (OS 2) the system cannot find the file specified.

  ORA-00312: thread 1 1 online journal: ' E:\APP\ABIGAIL\ORADATA\ORCL\REDO1A. JOURNAL"

  ORA-27041: could not open the file

  04002 - OSD: could not open the file

  S/O-error: (OS 2) the system cannot find the file specified.

  Errors in the e:\app\ABIGAIL\diag\rdbms\orcl\orcl\trace\orcl_lgwr_1952.trc file:

  ORA-00313: open failed for the members of the group log 1 of thread 1

  ORA-00312: thread 1 1 online journal: "E:\APP\ABIGAIL\ORADATA\ORCL\REDO1B."

  ORA-27041: could not open the file

  04002 - OSD: could not open the file

  S/O-error: (OS 2) the system cannot find the file specified.

  ORA-00312: thread 1 1 online journal: ' E:\APP\ABIGAIL\ORADATA\ORCL\REDO1A. JOURNAL"

  ORA-27041: could not open the file

  04002 - OSD: could not open the file

  S/O-error: (OS 2) the system cannot find the file specified.

  Errors in the e:\app\ABIGAIL\diag\rdbms\orcl\orcl\trace\orcl_ora_2908.trc file:

  ORA-00313: open failed for the members of the newspaper group 1 of thread

  ORA-00312: thread 1 1 online journal: ' E:\APP\ABIGAIL\ORADATA\ORCL\REDO1A. JOURNAL"

  ORA-00312: thread 1 1 online journal: "E:\APP\ABIGAIL\ORADATA\ORCL\REDO1B."

  USER (ospid: 2908): put an end to litigation because of the 313 error

  Instance of stopped by USER, pid = 2908

  Trace file E:\app\ABIGAIL\diag\rdbms\orcl\orcl\trace\orcl_ora_2908.TRC

  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  Windows XP Version V5.1 SP3

  CPU: 2 - type 586, 2 physical cores

  Process affinity: 0 x 0 x 00000000

  Memory (success/Total): Ph: 276 M / 1791 M, Ph + FCP: 1116 M / 3685 M, GOES: 1166M / 2047 M

  Name of the instance: orcl

  Redo thread mounted by this instance: 1

  Oracle process number: 31

  Windows thread ID: 2908, image: ORACLE. EXE (SHAD)

  2013-10-08 22:37:15.453

  SESSION ID: (125.5) 2013-10-08 22:37:15.453

  CUSTOMER ID :() 2013-10-08 22:37:15.453

  :() 2013-10-08 22:37:15.453 SERVICE NAME

  MODULE NAME: (sqlplus.exe) 2013-10-08 22:37:15.453

  ACTION NAME :() 2013-10-08 22:37:15.453

  DDE: Key problem "ORA 312' was the controlled flood (0 x 1) (incident)

  ORA-00312: thread 1 1 online journal: "E:\APP\ABIGAIL\ORADATA\ORCL\REDO1B."

  DDE: Key problem "ORA 312' was the controlled flood (0 x 1) (incident)

  ORA-00312: thread 1 1 online journal: ' E:\APP\ABIGAIL\ORADATA\ORCL\REDO1A. JOURNAL"

  ORA-00312: thread 1 1 online journal: "E:\APP\ABIGAIL\ORADATA\ORCL\REDO1B."

  DDE: Key problem "ORA 313' was the controlled flood (0 x 1) (incident)

  ORA-00313: open failed for the members of the newspaper group 1 of thread

  ORA-00312: thread 1 1 online journal: ' E:\APP\ABIGAIL\ORADATA\ORCL\REDO1A. JOURNAL"

  ORA-00312: thread 1 1 online journal: "E:\APP\ABIGAIL\ORADATA\ORCL\REDO1B."

  ORA-00313: open failed for the members of the newspaper group 1 of thread

  ORA-00312: thread 1 1 online journal: ' E:\APP\ABIGAIL\ORADATA\ORCL\REDO1A. JOURNAL"

  ORA-00312: thread 1 1 online journal: "E:\APP\ABIGAIL\ORADATA\ORCL\REDO1B."

  2013-10-08 22:37:15.484

  USER (ospid: 2908): put an end to litigation because of the 313 error

  I realize that I don't have redo1a.log and redo1b... can - I simply recreate these files at the level of the BONE?

  I use winxp pro, oracle 11 g 2

  Thank you guys!

  Has been your last stop clean or incompatible? (immediate or cancel)?

  What happened that your loss of redo log files? Where are they? Were they use when they disappeared?

  You can try to make changes to your collage of the database, and then disable the redo log (rebuild them) files with:

  change the Group of clear database logfile X; (for each redo log group missing)

  and then alter database open;

  That will be if your controlfile sees it takes on these data in case of failure redo log files for example recovery (in the case where crashed database). In this case, your option is either incomplete recovery until the last before SNA do it disconnects disappeared (last SNA on the newspapers archived, excluding the Oder) flashback GOLD database to the same SCN (if you have configured blowback).

  Concerning

• Can I create several GS - GE in an ISA envelope?

  
  Hello Guru B2B,

  We are facing the challenge to meet the requirements of the CMS.

  In terms of 834 s sent to the issuer, let us B2B envelope. In the generated 834 edi batch file, there is an ISA, a GS - GE, GS - GE, there are several ST - its.

  When send to CMS, we need to consolidate the operations of ST - SE with the same ID of plan into a single set of ST - SE. Then we have several GS - GE under an ISA, a 834 edi file.

  My question is Oracle B2B who takes? If so, how can achieve us?

  Thank you very much

  NAFTA Li

  Hi Ismail,

  Sorry for the late reply. We were in the launch phase.

  In fact, there is nothing special needs to do. The batch automatically regroup transactions by ST/SE, GS/GE. B2B supports several GS/GE in a single ISA envelope.

  Because GS/GE are set by B2B, so I need to explicitly specify the "GroupSenderID" in xml 834. For the mapping using the SOA BPEL, so I add the following in my xslt code mapping code. Where $myGroupSenderID is a variable of its values is calculated.

  --------------------------------------------------------------------------------

  BE

  Thank you

  NAFTA