Group not appearing is not in the workspace

Similar Questions

• "Could not apply the workspace because the file was not found."

  I've just upgraded to the latest version of Photoshop (CC 2015.5). Some of my photoshop files does not open and I get an error message: "could not apply the workspace because the file was not found."

  I have uninstalled/installed Photoshop CC 2015.5, I uninstalled and installed two previous versions of Photoshop, I reset my preferences, and I repaired disk permissions.

  None of them worked.

  What would it be?

  Hello

  Quick note giving clarification on the 2105.5.1 update: the error message that the OP has reported is inaccurate for the State. The update should simply fix the alert to note that it is impossible to open the file, instead of the misleading warning that a workspace cannot be applied.

  We did not all patches to open a file that fails intermittently. We have still not an understanding of root to the problem the OP has been run in.

  Kind regards

  Steve

• When I try to change the PS CS6 workspace, I get the following error message: "Could not apply the workspace because of a program error." Does anyone have a solution to this problem

  When I try to change the PS CS6 workspace, I get the error message of passage: "Could not apply the workspace because of a program error." This happens when I try to change the default setting (Essentials) to any other predefined workspace.  Does anyone have a solution for this problem?

  If this fails, Menu Finder > go > go to folder

  ~/Library/preferences/Adobe Photoshop CS6Settings/workspaces (modified)

  Move the change case of workspaces on the desktop, and then restart the Psalm

• EN PDF appearing does not in the workspace

  Hi all
  
  I have ghostscript 8.63 installed on the server and reconfigured financial information.
  
  However when I consider the report in PDF mode it gives me HTTP 500 error.
  
  I have an error in
  
  [Lcom.brio.one.common.NetAddress;@25ce430
  [Lcom.brio.one.common.NetAddress;@29e99b6
  [Lcom.brio.one.common.NetAddress;@2aa587f
  WARN [15]:-setting of row size maximum 100,000 and maximum of columns-1, for A8B0442B575B6B5477D0310EC2C3E46E8500F24A99240864F26393D576A759CAEC0F45082D726014A1148B7D9FBB362AA8F3E3A6 of session ID
  [Lcom.brio.one.common.NetAddress;@23fcad2
  [Lcom.brio.one.common.NetAddress;@26aea8f
  WARN [25]:-setting of row size maximum to the size of 100 000 and maximum of columns-1, for session ID 64542DD4E1D3B3449FBBF8109C10205087CD0E84C4ABD540BABED19C017944C6FCB7C19A6ADB7B18EB8F77970D88EFD0769CF779
  WARN [25]:-setting of row size maximum 100,000 and maximum of columns-1, for F8D8A6215ABF8B413207830D5C3DE98858F1C4946BEF08C675B2CB5BEDA66EC199765B9F45073A420CBE3C7F1467B9F0FA4906ED of session ID
  [25] INFO: - cube operation view - query MDX.
  [< 19 January 2011 16:22:54 AM PST > < error > < HTTP > < BEA-101019 > < [ServletContext@35582412[app:FINANCIALREPORTING module: hr path: / hr spec-version: 2.5 version: 11.1.2.0]] Servlet failed with an IOException
  java.io.FileNotFoundException: D:\Oracle\Middleware\user_projects\epmsystem1\tmp\FinancialReporting\ckattookaran\46408962218654595.pdf (the system cannot find the file specified)
  at java.io.FileInputStream.open (Native Method)
  at java.io.FileInputStream. < init > (FileInputStream.java:106)
  at com.hyperion.reporting.webviewer.HRFileRetrieve.doGet (unknown Source)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
  Truncated. check the log file full stacktrace
  >
  
  It's the printed newspaper
  
  [2011-01-19 T 04: 05:55.491 - 08:00] [EPMFR] [ERROR] [00192] [oracle. EPMFR.core.reporting.printserver.PrintInstanceThread] [tid: Thread-11] [ecid: 0000IqUAf6lC4yQ_m_S4yZ1DDhE2000002, 0] [SRC_CLASS: com.hyperion.reporting.printserver.PrintInstanceThread] [SRC_METHOD: processInstance] could not load the Distiller or Ghostscript. Ensure that a supported of Ghostscript version or the Distiller is installed correctly
  
  Am I missing a step?

  This problem is solved... I had to uninstall Ghost script... remove all entries in registry, and install it again...

• After you download PS CC 2015 eroor message...  Could not apply the workspace because the disk is not available.  Help!

  I am a Mac user and have the account Cloud creative photography.

  Yesterday, I downloaded the latest version of PS CC 2015.  Since when I try to create a new file in PS I get the above error message.

  I uninstalled and re-installed PS CC 2015 three times.

  I have reset Pram and MSC computer.  In addition, I held the course, option and i think during the opening of the PS and then get new settings.

  Nothing seems to have worked.

  A suggestion that I am heistant to try without some indications it's OK is to uninstall both the PS CC 2015, as well as the creative Clouud and then reinstall the creative cloud followed a new time download PS CC 2015 again.

  Try to give permissions to both libraries (library system & user library) and the Applications folder.

  For the Applications folder

  ---------------------------------

  Open Finder

  On the left panel, you will find applications-> folder, right-click on this (CTRL + click) and then click on read the information.

  Inside you will find sharing and permissions - Click on this

  You will find an icon of padlock at the bottom right, click on the lock icon, and then he could ask your mac password, please put to.

  Now, click the little plus (+) and then add the users you want to, please make sure that you add the admin account.

  Give read and write at all.

  Click the gear icon at the bottom of the get info window and choose "Apply to the elements included" it appears a message that the changes cannot be undone - click OK to that.

  This measure will apply privileges and which can take some time depending on the size of the file.

  Once this is done, click the lock icon, and then close the get info window.

  Done with file applications here.

  For the user's library

  -----------------------

  Open Finder

  Click OK at the top of the page and select 'go to folder '.

  Type "~ / Library ' and press go

  Click (CTRL + click) on the library folder, if you are within this library, you can right click (ctrl + click) on an empty space between folders and then click on information

  Inside you will find sharing and permissions - Click on this

  You will find an icon of padlock at the bottom right, click on the lock icon, and then he could ask your mac password, please put to.

  Now, click the little plus (+) and then add the users you want to, please make sure that you add the admin account.

  Give read and write at all.

  Click the gear icon at the bottom of the get info window and choose "Apply to the elements included" it appears a message that the changes cannot be undone - click OK to that.

  This measure will apply privileges and which can take some time depending on the size of the file.

  Once this is done, click the lock icon, and then close the get info window.

  Made with the user here library folder.

  For the library system

  ----------------------------

  Open Finder

  Click OK at the top of the page and select 'go to folder '.

  Type "/ Library" and press go

  Click (CTRL + click) on the library folder, if you are within this library, you can right click (ctrl + click) on an empty space between folders and then click on information

  Inside you will find sharing and permissions - Click on this

  You will find an icon of padlock at the bottom right, click on the lock icon, and then he could ask your mac password, please put to.

  Now, click the little plus (+) and then add the users you want to, please make sure that you add the admin account.

  Give read and write at all.

  Click the gear icon at the bottom of the get info window and choose "Apply to the elements included" it appears a message that the changes cannot be undone - click OK to that.

  This measure will apply privileges and which can take some time depending on the size of the file.

  Once this is done, click the lock icon, and then close the get info window.

  Done with the record of the library system here.

  Please let me know if it works

  Please note: do not just right-click on MAC HD complete and provide all permissions that can bring the MAC in any startup mode.

  Concerning

  Jitendra Khatwani

• Photoshop CC 2015 - "Could not apply the workspace because of a program error."

  The program fell arbitrarily photography Workspace. When trying to assign photography the following error message is displayed: "Not able to apply the workspace because of a program error." I restarted the program several times and my computer twice. My computer is six months old and works like a charm.

  Hi garcarcha,

  Please follow the steps that might help you below:

  On windows:

  1. open Run (press windows + R)

  2. type %appdata%\protector.exe

  3. go to folder Roaming > Adobe > Photoshop cc 2015. Adobe Photoshop cc 2015 settings

  4 moved the (modified) Workspaces folder on the desktop and restart Photoshop

  On Mac

  1 go to the Menu Finder > go > go to folder

  2. tap ~/Library

  3 go to Preferences > settings of Adobe Photoshop CC 2015

  4. move the (modified) Workspaces folder on the desktop, and then restart the Psalm

  Concerning

  Sarika

• Ctrl-alt for double layer now duplicates groups not only the layer?

  I almost always duplicate the objects or layers by using ctrl-alt drag (while using move tool) to duplicate the layer.  Now, in the last Photoshop CC 2014 it duplicates the not only the layer group.  Is this a setting?  Thank you

  Well, obviously, in the December Update they fixed it... It must have been a glitch in the previous update.  So if you have this problem - update to December was last updated.

  Thank you

• When I opened my first items 9, I do not see the workspace, I have to restart the program several times until it works, what's happening?

  Can someone help me, the program was fantastic, but a few months ago when I opened my first I can't see the workspace, the program does not show me an error message, but I have to restart Windows several times until I can work normally, what happens, first adobe have some problems with other programs installed? I don't understand, I have a serial number, I buy a dell with the program installed, with Windows 7.

  Can someone help me, it is very important for me this program and I use it a lot

  

  Hi all

  I solved my problem by reading the article that wrote JsV in 29 of August, I have delete the Adobe Premiere elements Prefs, thanks Abdel Romano, who responded to the JsV and solved the same problem I had, thank you very much.

• First Elements 9 will not load the workspace

  Hi all

  I had pre 9 on this computer for some time and have just had a problem in the last month or two.

  • Home screen according to the normal and allows new project or open a project to be selected.
  • Once one of them is selected the workspace opens but is empty without the chronology or the preview selector.
  • the bar menu is at the top of the workspace, but only some of the choices in the drop-down list can be clicked, Eastern are grayed out.
  • those who can be clicked is the standard file menu and workspace menu and catering help.
  • disable the button cannot be selected, nor can register or update. I am running the latest version.
  • I have the last quictime and all drivers are up to date.
  • I am running windows 7 64 bit
  • as stated above, this program has run on this machine before, I have 4 GB of Ram and plenty of space (free 1.5 TB) hard drive

  Thank you

  YNT-08

  You run the program for the 9.0.1 update?

  Assuming that Yes, let us try to rinse the preferences

  In Windows 7 64 bit

  Local disk C

  Users

  Owner

  AppData

  Roaming

  Adobe

  First Elements

  9.0

  and in the folder 9.0 is the Adobe Premiere elements Prefs file that you delete. If it does not, then delete the 9.0 whole folder in which Adobe first Prefs files exists.

  Have the Folder Options Show hidden files, folders and drivers active so that you can see the described path.

  First Elements 9 didn't as a pre-installed on your computer? You have an installation disc or the installation for this product files?

  Please let us know the results.

  Thank you.

  RTA

• HFM Application works is not via the workspace

  Hello
  
  When I try to access the HFM application via the workspace I get the following error:
  
  There was a communication error. The answer is:
  
  http://Server/HFM/GlobalWorkspaceNav/BPM/modules/com/Hyperion/HFM/Web/appcontainer/ADF.asp <! DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 / / IN" "http://www.w3.org/TR/html4/strict.dtd" >
  < HTML > < HEAD > < TITLE > page can not be found < / TITLE >
  < META HTTP-EQUIV = "Content-Type" Content = text/html"; charset = Windows-1252 ">"
  < STYLE type = "text/css" >
  BODY {make: verdana 8pt/12pt}
  H1 {make: verdana 13pt/15pt}
  H2 {make: verdana 8pt/12pt}
  A:link {color: red}
  A: visited {color: maroon}
  < / STYLE >
  < / HEAD > < BODY > < TABLE width = 500 border = 0 cellspacing = 10 > < TR > < TD >
  
  < h1 > the page could not be found < / h1 >
  The page you are looking for has been removed, had its name changed, or is temporarily unavailable.
  < hr >
  < p > please try the following: < /p >
  < ul >
  < li > make sure that the Web site address displayed in the address bar of your browser is spelled and formatted correctly. < /li >
  < li > if you have reached this page by clicking a link, please contact
  the Web site administrator to alert them that the link is badly formatted.
  < /li >
  < li > click the back button to try another link. < /li >
  < /ul >
  < h2 > HTTP error 404 - file or directory not found. < br > Internet Information Services (IIS) < / h2 >
  < hr >
  information technology (for support staff) < p > < /p >
  < ul >
  < li > go to the Microsoft Product Support Services and perform a search by title for the words HTTP < /b > < b > and < b > 404 < /b >. < /li >
  < li > < b > help IIS < /b >, which is accessible in IIS (inetmgr) Manager, to open
  and search for topics titled < b > setting up a Web Site < /b >, common administrative tasks < /b > < b > and < b > on the Custom Error Messages < /b >. < /li >
  < /ul >
  
  < Table > < /TR > < / TABLE > < BODY / > < / HTML >
  
  ----------------------
  
  I tried to reconfigure the web server (I use IIS) several times.
  
  I have HFM 9.3 installed windows2003 server.
  
  The rest of the components work fine through the workspace... dim library, library of the app etc.
  
  Any help would be greatly appreciated. Thank you.

  You can also try the following:

  1. from the IIS Manager > Web Service Extensions try to change the following:
  Internet data connector = allowed
  WebAnalysis = authorized
  allowed = workspace
  HR = accepted
  AWB admitted =
  WebDAV authorized =
  then restart IIS

  2 edit web site properties by default in IIS to remove all entries in the ISAPI filters tab

  KN

• Could not start the Workspace Sprout: "workspace has encountered an error. Please try again ".

  From now on, whenever I try to start the workspace to germinate, I get the error message:

  "Workspace has encountered an error.  Please try again. »

  • running Windows 8.1 with all updates.
  • I restarted the system repeatedly
  • No deviecs in Device Manager have alerts.

  Any suggestions?
  Thank you

  Michael

  I suggest go to the support page for germination and download and install the latest version of the workspace.

  WyreNut

• Dynamics in the designer, but not in the workspace

  Hi all, I was wondering if someone could point me in the right direction. I have a form with expansion of a few tables and digital signatures that I created in the designer that works perfectly when I saw it. But when I use it in my process and show the form in worspace (or download it on workspace and open it on your desktop), the shape is more dynamic. The buttons are no longer add lines to my table or anything like that, and no javascript errors are appearing in my debugger. Is there anything that would cause this?

  I think this is maybe my custom rendering process (which is just the engine by default with a policy record and added extensions) could be the cause of the issue, but I don't see why. Can someone help me with this?

  Thank you

  Billy

  In your process of renderForm in the render PDF form Options make you you set the option RenderAtClient to Yes. Also under the form open the form Propereties intself and the make you default tab rendering PDF Format has the dynamic value of XML form.

  Paul

• Error every time I close a file (could not apply the workspace because the file is not found)

  I get this message every time I close a file. All the fixes would be greatly appreciated.

  

  In addition, you can try to reset the Photoshop preferences to default.

  To re-create the Photoshop preferences files, start the application while pressing Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop settings file?"

  Kind regards

  Mohit

• New members added to the workspace are not updated in beehiveonline

  I have a beehiveonline workspace
  
  I've added new participants via the https://beehiveonline-apex.oracle.com/pls/apex/f?p=200:4:402691159256859:NO apex management tool:
  
  I've added new users Friday, March 19.
  
  In the workspace management tool (where you can view the members of the Group) have the status of verification.
  
  When I checked today Monday, March 21, users are not yet valid parcipants of the beehiveonline workspace which they have been added to through the apex management tool
  
  It seems that the apex tool is not insert these new participants in the beehiveonline workspace?
  
  How can I solve this problem?
  
  
  Noel

  RBS - first on request RBS - first on [email protected] - no available invitation - [email protected] 1 F Normal Workspace request<--- workspace="" required,="" f="" means="">

  Christmas recording in the groups tool shows that you have chosen can have a default value, workspace. This means that users are in a group and can be added to the workspace - individually or in groups. The addition will have to be done manually.

  Phil

• Photoshop won't let me not deselect the hand tool

  I was sent a jpg of a web to change banner ad. It was sent to my PC where I have Photoshop CS2 and I tried to make changes, but found that I don't have the best copies of our logo on the PC, so I saved what I had done so far and I transferred to my Mac to work on. I'm on OS X 10. ; 7.3.

  When I open on my Mac in CC in Photoshop, the hand tool showed on-screen even if highlighted the move tool in the Toolbox.

  He wouldn't let me change the tools in the Toolbox. the hand rest icon no matter what I do. But he does not behave as you would expect the hand tool to behave, either; It is not move the workspace. It doesn't have any effect at all.

  However, I can still copy and paste by using the menus. But I can not move what I stuck with the arrow keys of the keyboard.

  I was able to save and close the document by using the menus.

  Someone has seen something like this before? Can I do about it?

  I thought it might work in Photoshop CS6 better, so I'll try that next.

  She works in CS6, so maybe it was my OS.