First Elements 9 will not load the workspace

Similar Questions

• Change Presets in first Elements 4 will not allow the change of frame

  Hello:

  I followed the instructions for help to create a new preset.  Currently, the NTSC preset allows only 720 X 480 Hz Standard.  I clicked on the "New Preset" button and it will allow me to change the eligible areas, but it does NOT change the size of the image.  I tried to create a size of 320 X 240.  I also need to create an image size of 640 X 480 for a Flip Video camera.

  Anyone know how to change the size of the image on a new preset in first Elements 4?

  Thank you

  Rich Locus

  Logicwurks, LLC

  Are talking you about creating a project preset or a predefined action? And, if the latter, what category of shares, you are to create?

  It is not available to create a custom frame size preset, however, in the Premiere Elements.

• Inspiron 1525 / Windows Vista replaced but disc will not load the drivers

  Inspiron 1525 (6/2008) hard drive failed.    Bought a Western Digital spare hard drive 500G (WD Blue) SATA III 5400 RPM.   (NOTE: this is the 2nd replacement hard drive because I bought the 1525... the first time I replaced the hard drive, everything worked as it should.) Original hard drive was a Seagate).

  Replacement hard drive installation is installed it will not load the Vista OS from the disk to the operating system (which came with the laptop) because it does not recognize the driver for the hard disk.

  I tried downloading the latest drivers from the Dell site, but which did not work or the other.

  As I said, the previous hard drive replacement (an another western digital) works perfectly when I reinstalled the Vista operating system in 2010.

  Any ideas?

  Thank you...

  Thanks for the detailed instructions.   I tried everything, but it didn't work.

  Then I read about someone trying to install the same on an Inspiron 1545 hard drive and need to adjust the drive to align with the connectors using paper and another person was using the foil which made me realize that it was a problem of 'size' or 'worthy '. I then decided to open the laptop and manually set the new drive in place and everything works now. (Dell 1525 has a side load drive holder therefore had to open to make this setting correctly).  The player on the 1525 is 9.5 mm thick, but the new disc is 7 mm... even though the sales page for this player said he would fit a 9.5 mm slot.

  Everything is good now.

• Adobe first Elements 13 do not interpret the film and properties correctly for widescreen is a mod.

  Adobe first Elements 13 do not interpret the film and properties correctly for widescreen is a mod. This has been brought to the attention of Adobe in December of 2014 by others. If you import a footage in Adobe Premiere elements 11 or 12, you can eliminate the black bars on the sides by setting predefined settings correctly and using properties and interpreting the film. Not the same with 13 elements. What has been done to correct the problem? How users can be compensated for the purchase of a program or upgrade to a program that has a fault serious?

  Please notify.

  fran3

  What you report a known problem with elements 13/13.1 first I wrote about back in December 2014, and whenever the subject came up in the Adobe Premiere elements Forum.

  First Elements ATR troubleshooting: EP: 13 serious problem with. MOD Widescreen files

  I have not seen Adobe personal or PRE_help this issue whenever it appears in one of the threads here. The frequency of appearance of personal Adobe or PRE_help is not defined. It's a call from Adobe on ignore or fix in the next version or other.

  This isn't Adobe. Instead a user. You need to contact Adobe to know the why of the situation and what his plans are to remedy the situation in order to allow the usual workaround if this is a solution that will make unnecessary workaround.

  You have a chance by converting the widescreen is a mod to another format that would recognize the flag of 16:9 wide screen of is a mod, if 16:9 is really there.

  RTA

  Add on... Consider

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

• Fire fox is slow and on a single website, it goes on the site but will not load the page

  Fire fox is slow. Also on a single Fire fox web site goes on the website but will not load the page
  Questions began Tuesday, June 16, 14. Website can be opened with other browsers.
  I am running windows XP sp2

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;
  Press < Alt > or < F10 > to display the toolbar.
  Followed;

  Windows; Tools > Options
  Linux; Edit > Preferences
  Mac; name of the application > Preferences

  Then Advanced > General.
  Find and stop using hardware acceleration.

  Dig safe web sites and see if there is still a problem. Then restart

• satellite 4080XCDT will not load the OS W2k

  Hello

  I have a problem with a laptop.
  It runs windows 2000 and will not load the operating system.

  I think someone changed the boot.ini on the pc,
  Now, when it is turned on, it displays the operating system of windows 2000, as well as the other one under it called operating system windows 2000 photo.
  I think someone tried to change the boot image but erred in the boot.ini file and now it won't start him.

  So I think that the boot.ini file is now incorrect and not finding the operating system.
  Is it possible to change this and get the operating system to load?

  If you are sure that only the boot.ini file has been changed then, you can see this Microsoft Web site, and the article on the boot.ini file in Windows 2000.

  Here you can find details how works a boot.ini file and what to change.

  * How to edit the Boot.ini file in Windows 2000 *.
  http://support.Microsoft.com/kb/311578/en-us/

  Good bye

• The Adobe Desktop installation program will not load the app screen tab, all I see is the loading icon and runs continuously without ever loading. All the other tabs seem to load without any delay, only the app tab does not load. I tried to uninstall and

  The Adobe Desktop installation program will not load the app screen tab, all I see is the loading icon and runs continuously without ever loading. All the other tabs seem to load without any delay, only the app tab does not load. I tried to uninstall and reinstall the software, rebooted a couple of times and tried to activate the download of the Premier Pro via the website, but it still doesn't load in the desktop application.

  This solved the problem for me:

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

• From 50.0, Firefox will not load the tabs. How can I treat?

  Recently (very probably coinciding with the 50.0 update), Firefox suddenly stopped loading tabs. All the pages get stuck on 'connection '.... "as well as system as topic tabs: support and about: config. Google.com and other Web sites and locations internal intranet do not load.

  The first tab that opens at the start of Firefox will sit on a white page indefinitely, not to load the page speed dial 'shortcut '. Not even the tabs system such as topic: support load. If a second tab is open, and the first tab is closed, then the tabs system become available, but websites will always be blocked to 'connection '.... »

  This troubling behavior began to appear in dozens of jobs in our Organization. On each of them, except one (so far), we were able to resolve by obtaining: support to load using the method described above and refreshing of Firefox, which leads me to believe there is some sort of problem with the profile.

  On a desktop, Firefox seems to work after a refresh, but after an instance of Firefox is closed and a new opening, the new question asserts itself. When you open Firefox under a new user profile, it works once before breaking. On this particular station, I tried uninstall Firefox and reinsert several times without success, as well as facility nightly, which presents the same exact issues as the regular version. I'm stumped on how to solve this problem for the end user. I even tried to run CCleaner.

  Any ideas?

  Hi HaggenIT, can you please try the following and see if it works: enter Subject: config in the address bar of firefox (confirmed the message information where it appears) & search for the preference named browser.tabs.remote.autostart.2. Double-click it and change its value to false.

• Adoge first elements 11 does not load

  I bought Adobe Premiere elements 11 Dell to install on my new Dell XPS One 27, which runs Windows 8 Pro.  After you insert the Adobe DVD in my drive hard, my computer would not read the DVD from Adobe, and I can't eject the DVD Adobe.  Any suggestions?

  Is this problem happening only the elements DVD first? You can try loading other DVD and copy their contents to your hard drive? Wanted to confirm that your DVD player works very well so that we can solve this problem. Also if bought separately first Elements of Dell (i.e., it was not shipped with your Dell XPS purchase), you can download the trial version of Premiere Elements from here and when installing it enter the serail number to allow.

  Thank you

  Nikhil

• Satellite P500-12F will not load the drivers of track pad!

  Hi, I just got a DVD driver for this lappy and is a self intall of all drivers that are missing or that need to update, when ran I was told of the Skate track had disappeared, and started to load, but it will not I tried a load of strength in vain Hat too, the track pad did not work since getting this second hand could the block be disconnected from the motherboard?
  This would make the driver not loading please?

  Any help would be really appreciated.
  Thank you, Wayne...

  Hello Wayne

  In front of me, I have Satellite P500 and I use it almost 10 months now without a single update. What I'm updating are important updates from Microsoft. More than that and so far I didn't notice a single hardware or software problem.
  After reading your ad m a little confused.

  As far as I know Toshiba doesn't offer any DVD for that laptop, not any kind of pilot DVD so please be so kind and tell me which DVD driver is and who has created and offered this DVD.

  original is Win7 64 bit OS (original image of recovery Toshiba) preinstalled on this P500?

• Windows will not load the locally stored profile

  Windows displays a message saying that windows cannot load the locally stored profile. possible causes of this error include insufficient security rights or a local profile damaged if the problem persists contact your proveedor of network... and the call but they say that there is no problem in I can conect to the internet that it is a problem in microsoft...

  elregreso,
  Thanks for posting in the forums for answers.  If you are not in a domain environment then the following items the profile of users of coverage problems.  You can also try a system restore to a date prior to the issue.

  The links below discuss issues of user profile and the system restore feature.

  http://support.Microsoft.com/kb/555473

  http://support.Microsoft.com/kb/811151

  http://support.Microsoft.com/kb/306084
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I am trying to load Dazzle DVC90 on my Vista computer. It will not load the software, how do I get this installed so I can use my Pinnacle Video program?

  The computer does not accept my Dazzle DVC90. I tried to download from the site Web of Pinnacle, but it gives me the message that it will not download. How can I get this program on my computer?

  Contact Pinnacle support. Nothing to do with installation, upgrade or activation of Windows Vista.

• First Pro CC will not recognize the second monitor

  Greetings:

  I'm having a problem with the help of my second monitor to the output in CC PP.  I did the following based on another post:

  Try these two steps to check the transmission is enabled:

  1. go in the program monitor Panel menu > check "Allow to pass" is checked.

  2. go to Preferences > reading > check your 2nd monitor is present and active.

  What I get when I do it is a black screen that covers the top left of my screen at 1920 x 1080, the size of my other monitor.  When I save a project and use my second monitor for a sign, say under my belt, I'm able to drag the Panel above and use it, but when I save and reboot, the Panel is always on my primary monitor:

  Model name: iMac

  Model identifier: iMac13, 2

  Processor name: Intel Core i5

  Processor speed: 3.2 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 6 MB

  Memory: 32 GB

  Boot ROM version: IM131.010A.B05

  Version of the SCM (System): 2.11f14

  NVIDIA GeForce GTX 675MX:

  Chipset model: NVIDIA GeForce GTX 675MX

  Type: GPU

  Bus: PCIe

  The PCIe track width: x 16

  VRAM (Total): 1024 MB

  Provider: NVIDIA (0x10de)

  Device ID: 0x11a2

  Revision ID: 0x00a2

  ROM revision: 3707

  Exhibition:

  iMac:

  Display type: LCD

  Resolution: 2560 x 1440

  Per pixel: 32-bit color (ARGB8888)

  Main screen: Yes

  Mirror: Off

  Online: Yes

  Integrated: Yes

  VP2365WB:

  Resolution: 1920 x 1080 @ 60 Hz

  Per pixel: 32-bit color (ARGB8888)

  Display serial number: RDC104500162

  Mirror: Off

  Online: Yes

  Rotation: support

  I tried different confgurations in Preferences-> reading, but get the same result every time.  I have to force quit when I get the black box, I'm unable to access other options of PP.  Anyone encountered this, and if so, is there a solution?  I saw that there was a problem of "transmit", but that does not solve this problem.  Thank you!

  I don't hate replying to my own post, but I thought I'd post here how I solved my problem in case someone else ends up here with a similar one.

  To be clear, I have 2 monitors and when I activated transmit full playback screen would be superimposed on my workspace creation on monitor 1 even though I had specified to monitor 2 in my video device in the preferences > reading.

  It seems that during the last few months (I have a vague memory of it), I decided to check the "improvements" in the way Mavericks managed multiple monitors. I created two spaces in Mission Control, this is how Applications in the dock wins a menu extended options in the menu contextual (the one that appears when your right click the application icon in the dock). I knew that this extended menu was there because the site of Apple told me.

  From the OPTIONS menu on my 2 monitor setup are then ASSIGN to > all workstations; OFFICE ON DISPLAY 1; OFFICE ON DISPLAY 2; NONE.

  After trying the various options to see if the operation was consistent with the explanation of Apple and if I wanted to work with spaces, I decided that I don't have not so I removed the spaces that I created in Mission Control.

  Remove the deleted spaces these additional options ASSIGN to THE menu even though I wasn't aware of this at the time.

  A few days later, I went to allow the TRANSMISSION when editing in Premiere Pro (that I had used successfully before) than having the problem described in this thread. I stupidly credited this problem for a recent update of CC and in the release of 2014 CC does not correct it, I started to look elsewhere.

  Cut to the end and the way - after proving that a new Mac user account test does not show the problem, I have returned to my user account, active areas in control from Misson, changed the menu ATTRIBUTE to None for Premiere Pro (default), then the TRANSMISSION function worked correctly, showing a full picture has been assigned to the correct window.

  OK, the last paragraph may suggest I knew what to do but I have not, I had spent a lot to research in the library of the user to search for differences, until I came across this.

• First elements 4 will accept all the MPG files

  I'm trying to re - edit some old DVD files in 4 first.

  It seemed to me that the only way to achieve this would be to convert the VOBs created originally with first Elements of MGPE2 files extension .mpg and then re - import. There may be a way easier than what would be better.

  However, in my method of some files, it first only converts 14 minutes of the video file and is important the minutes of rest (about 20) in black.

  This has happened on several files.

  I know that the video is there because I can play .mpg on many actors including Ms. It would seem that the first renouncing sometime.

  Can someone give me some advice please.

  This is in version 4, I think. It can be called DVD and HDD Camcorder. Something like that.

  However, as John says, you can also convert the VOBs. But if you do, you must convert to DV - AVI using a program like MPEG Streamclip, use the settings listed in our FAQ to the right of this forum.

  http://forums.Adobe.com/thread/415317?TSTART=0

• Adobe first Elements 14 will not install on my Macbook Pro

  I have a SSD and 16 GB of ram, updated all, the installation page appears just to hang when I click the button install. Any advice? Thank you.

  Download PES 14 directly using the link I posted.

  If you are having problems, this with the adobe link, use prodesigntools.com:

  If you follow the 7 steps you can directly download a free trial here: Adobe Photoshop elements 14 Direct Download Links, first too. ProDesignTools

  and activate it with your serial number.

  If you have a problem from the download, you follow the 7 steps, or your browser does not accept cookies.

  the most common problem is caused by failing to meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

  failure to obtain this cookie translates into an error page displayed after clicking on a link on prodesigntools.com or initiates the download of an incorrect (e.g., current) version.