Group Policy settings are not correctly on TS with IE9
In our Active Directory environment with the GPO setting: Configuration of the user-> policies-> administration-> Windows components/Internet models explore / Internet Control Panel / Security Page-> Site to Zone assignment list, we have a list of Trusted Sites. If users connect to a Terminal Server running 2008 Server Std with IE8 installed, sites are affected confidence as expected. However, it has the same users connect to a Terminal Server running 2008 Server R2 with IE9 installed, sites are NOT assigned as reliable. I run gpresult to these users, and the report shows that this policy is applied, but GP behaves differently on different servers.
Hello Jim Pallotta,.
-What version of the operating system is installed on your computer?
If you work on a computer that is running Windows Server 2008, and then the question would be better suited in the TechNet support. I suggest you to report the problem in the following link.
http://social.technet.Microsoft.com/forums/en/category/WindowsServer
Tags: Windows
Similar Questions
-
Original title: problems with itunes
I have recently purchsed an ipod and downloaded the itunes program. Everything seems to work fine except or the fact that I can not access the itunes store, so have created new problems. It telling me that my network connection has timed out or my network settings are not correct. What settings should I have on, how can I make this work?
Hello
The reason for not being able to connect to the iTunes store may be due to the "hosts file" blocking the iTunes Store, or it can also be caused by security software, most likely, it might be Norton Firewall.Step 1:
Note: Please make sure that you enable the antivirus/firewall software after the test to keep your computer protected.
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-softwareStep 2:
See the link below for more details:
Unable to connect to the iTunes Store
http://support.Apple.com/kb/TS1368#win24
Follow the steps in troubleshooting mentioned in the above article. If the steps listed in the article do not resolve the problem, contact the Support Apple technique.
http://www.Apple.com/support/
http://www.Apple.com/contact/
http://discussions.Apple.com/category.jspa?categoryID=149Can run the fixit tool mentioned in the link below:
http://support.Microsoft.com/kb/972034/en-us you can try to disable the firewall completely or include an exception for the iTunes application in the firewall and check for the issue.
Thanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
The Group Policy settings do not allow the use of a PIN code at startup Bitlocker Windows 8
Hello
I hope you can help.
I tried to implement the encryption on my new laptop Lenovo Twist with windows 8, but get the following error.
ERROR: An error has occurred (code 0 x 80310060):
Group Policy settings do not allow the use of a PIN code start. Please choose a
other BitLocker startup option.I tried to change local policy settings...
- Go to Local computer policy > Computer Configuration > administrative templates > Windows components > Bitlocker Drive Encryption > Operating System Drives
- Open the key require additional start authentication
- Activate this key, then assign the require startup PIN with TPM TPM configure startup PIN
.. .but always not the same error.
Help, please. He drives me crazy!
Hello
Thanks for choosing Microsoft Community to post your question!
According to your description, it seems that you have problems with activation PIN code on startup.
Refer to the suggestions from this link and check.
For more help, I suggest you ask your question in the TechNet Forum. http://social.technet.Microsoft.com/forums/en-us/w8itprosecurity/threads
-
After you have reinstalled Windows XP, the video settings are not correct
Original title: parameters viedo
I had to reformat and reinstall XP. Everything works except for things like graphics, cards and other games and some pictures. They are very wide and short. I guess it's something in the video settings defined in landscape mode, but I can't find where. Can anyone help.
Thank you
Caz
You probably just set your screen resolution to match your monitor.
Right-click on an empty area of your desktop and select 'Properties', then click on the 'Settings' tab at the top.
At the bottom left there is a box of "Screen Resolution." Drag the marker to change the screen resolution to a setting that matches your monitor... You determine this by the ratio of the width to the height. Some common resolutions to the dimensions of the screen are the following:4:3 = 800 x 600, 1024 x 768, 1280 x 960, 1600 x 1200
5:4 = 1200 x 1024
8:5 = 1440 x 900, 1680 x 1050
16:9 = 1280 x 720, 1776 x 1000, 1920 x 1080 (widescreen)After you change this setting and click on 'OK', the screen will become to this resolution. It will give you a few seconds to confirm that the monitor can display this resolution. If you see the screen, click on 'OK '. If your screen is empty, don't panic but just wait 30 seconds approximately and your screen will return.
HTH,
JW -
FTP troubleshooting DWCS5.1: the proxy settings "are not correctly defined.
Hi all
I'm unable to ftp with DW. Joined a screengrab of the error message. As always, thanks for your comments.
Jacqui
You have switched your site FTP settings to use SFTP, as FTP connection was put out of service?
-
I have tried everything recently adjust the settings of the firewall from my window and a box appears saying that after an unidentified error, I can't access my firewall. After some research, I discovered that it was because my client group policy server does not connect and a small box appears saying that whenever I connect to my laptop. It is not effect my use of the internet at all, so I've never bothered to see what that meant until now I need to access my firewall. I tried to adjust the settings in group policy, but everything is gray and I can't change anything. I use an admin account so I don't know why I can't set the parameters. I'm completely stuck and I don't know that much about computers. Is there anything else I can try? I also tried a system restore, but it lasts for a long time and I can return only 5 days. Thank you
Hi Sheldon,
Are you connected or connected to a work network or domain? If so, this could be a policy governed by your network administrator, and you will not be able to change it.You might try to tell scientists on TechNet on your question to see if they have a better answer for you: -
How does password manager does not work even if the settings are set correctly?
I've recently returned to version 3.6.17 4 cause version 4 was unstable. Now that I have the old version (more stable) offer not password manager record passwords more even when the settings are set correctly.
I notice that I had viruses and rootkits deleted (maybe they did some damage) and I cleaned my system with a registry cleaner (maybe he removed some settings through it) and this has not fixed by a clean install.You still see the names and passwords in the Firefox password manager?
Make sure that you do not run Firefox in private - browsing using Firefox without saving the story mode (permanent).
- You enter private browsing mode, if you select: Tools > Options > privacy > History: Firefox will be: "don't forget the story ever.
- To view the history settings and cookies, choose: Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
- Uncheck: [] "Permanent private browsing Mode.
-
Changed group policy settings but now Windows is to appear this message to restart again!
I currently have windows 7 Professional 64 and I changed the settings of group policy to stop this annoying nagging screen pop to the top telling me to restart the computer after an update, but recently he has returned once again, and I made no changes to my group policy settings. Is now without taking into account this Microsoft Group Policy setting and not to say that the only way to avoid this is to disable windows update to install automatically?
Please repost your question in this forum: http://social.answers.microsoft.com/Forums/en-US/w7security/threads
Do you not understand that none of the bugs addressed by an update or security vulnerabilities do not take effect until you have restarted?
You understand that there is other than automatic Automatic Updates settings and that one of these other settings allow you to choose once downloaded updates to update are installed (i.e., so that you will not install an update unless & until you are able to restart)? ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Trying to connect to one of the accounts on my computer and the message telling me "the group policy service does not have the journal on.» Access denied. " Can someone help me with this?
Hello
1. is the computer connected to a network domain?2 are you facing this problem into account administrator? Do you have other administrator accounts enabled in the computer?
3 did you changes to the computer before the show?
Method 1:
Check if you are able to start the computer in safe mode.Step 1: Safe Mode
Start your computer in safe mode and check the number.To start your computer in safe mode
If you are unable to boot into safe mode, please let us know.Step 2:
You run the system restore in Windows recovery environment?
If this isn't the case, I would say you can do a system restore to the Windows recovery environment. Follow the steps in the section provided.
I hope this helps! -
Group Policy settings prevent put me the pc to sleep
Hi, someone help with this?
Previously, I had a Vista PC (as an Admin) I could adjust the monitor turns off after 30 min and get the PC to seelp after 60 min unattended. Whoosh! PC ignites (my fault)
New pc refurbished, reinstall the old accounts Exchange etc, admin permissions, now group policy doesn't let me define powersaving & sleep options (it is grayed out).
I am still an admin, but can not change the settings, someone help, suggestions? I have another pc on the network which behaves very well (but I never set fire to that) I have checked the settings and compared between the two, they seem the same, but the Group Policy settings have no sense. Any help gratefully received.
Thank you
Sorry, but this is beyond the scope of what we cover in these forums. For assistance with servers, please post to:http://social.technet.microsoft.com/Forums/en-US/category/windowsserver.
I hope this helps and that they can help you - I'm fairly certain that they can.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Title: Canon Utilities Digital Photo Professional
My pc, I cannot open the software above.
I get an error message saying that my resolution settings are not up to date, that requires a display of 1024 x 768 or more, but I have a HD monitor and a high-end graphics (Geoforce GT7000) card.
Windows 7 thanks to a 6 core processor and 4 GB of memory. If anyone can help.
Thank you very much
Steve
Hello
-You are aware of any changes made on the computer before this problem?Method 1: I suggest to see the link below and check if the problem persists.Change your screen resolutionMethod 2: If the problem persists, I suggest to update the graphics card and check if it helps.Updated a hardware driver that is not working properlyhttp://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyHope this information helps. -
Thunderbird esteem username and password are not correct,
Gmail account?
-
Windows display settings are not optimized
I tried to fix it and he said that the display settings are not optimized that means
Hello
This fixit?
Have you tried to make the resolution equal to the native resolution of your screen?
Right-click on an empty part of your desktop, and then click Properties. Click on the settings tab, drag the slider to the right. This should give the native resolution of your monitor. If not you may need to get the latest drivers for the graphics card.
If that makes things too small, you can try to slide to the left to get a lower resolution but I suggest using only a resolution that maintains the same ratio as the native resolution of your screen.
Tricky
-
Mobile data does not and the name of the Access Point settings are not available
I don't have a mobile data, not even the small up and down arrows or letters beside the sims signal bars appear.
I tried all the troubleshooting settings and different type of network, the airplane mode is off, mobile data are no limit, no power save modes are on. Phone is dual sim so I tried on the two sims and tried to disable the other sim and changing the sim slots, both sims are loaded with a credit of data that works in other android devices. WiFi works fine. Factory reset does not help.
There is that one thing that I can't not try troubleshooting. When I select settings > more > mobile networks > access point names, it says
"Access Point name settings are not available for this user.
Maybe if I could put APN I could get mobile data. How can I do or how I can try to get mobile data to work?
Phone's Xperia M4 Aqua E2363 with build 26.1.B.2.102 thanks if you can help
This text is a bit misleading, which is something that I have forwarded internally as your comments.
If you have no NPP stored the phone displays the text "the name of the Access Point settings are not available for this user" even if you use the owner account and have access to the settings.
Try to download the automatic settings from settings-> more-> Internet settings and see if that helps.
-
updated to the cleint system but printer server group policy printer does not show same printer displayed in the list in the devices and printers, but while printing the document, what is the problem of how solve the problem.
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
If you give us a link to the new thread we can point to some resources it
Maybe you are looking for
-
Firefox cannot connect to a local server subdomain if no available network connection.
Hello I have a laptop that is configured as a local server using Apache. On this, I use "localhost" as the domain and have several subdomains.Now, if I have no network connection (to any other device) available on this laptop, and then with Firefox I
-
addresses of Firefox in the navigation bar are missing/replaced by different menu drop down
When I type in an address, the drop down menu no longer contains the same list of addresses as always. Instead, there is a list of locations (less actual addresses www.com beneath each) in bold and some places are repeated in the menu drop down but t
-
Satellite A200 - turns off randomly
My Satellite A200 turns off randomly, I don't know if it is the power supply or 32 file system. I have re-installed Windows Vista 32-bit. and the problem still persists. Would that my adapter or power suply?
-
Satellite A75-211 turns off automatically - overheating problem
I have the A75-211 3.2 Ghz, and at first, he started cutting when I was burning DVD.OK, fair enough it just need more air circulation.But now if I get a lot of hard disk activity it's cut more. Seems to be more sensitive. Anyone else had this experie
-
asset stings on the internet Windows 7 won't launch
other games by default working fine.go to open it and don't receive nothing? What could be the cause or the solution. The only thing that I care wanted to learn to play.