Group residential access from other computers is read-only.

Similar Questions

• Client VPN prevents internet access from other computers on the network

  Hello.

  I run Client ver 4.6.03.0021 from an office on a network of 11 computers via a hub 16-port. Internet access is through an ICS gateway to the cable modem. Once I changed the modem cable to test a backup and then switched back to the original modem. After this, only computers that have the VPN Client (running or not) could access the internet. Computers that have no customer VPN can access only certain sites. Commonly viewed sites would say "site found. Waiting for answer", but the answer would never come and IE 6.1 cling. When I would try ping sites, it would fail. However, some sites such as Google.com would work.

  On one of the computers, on a whim of head, I installed the VPN Client but have not set up a connection. Now, this computer will connect to any website I want.

  Is there a fix easier to get access to other computers on the network without installing the VPN Client on each of them?

  Thank you

  H. Adams

  Hello

  Looks like you are running in MTU problem. The reason I say it is, automatically reduces the MTU value to 1300 VPN client during the installation for the whole system. That is to say all the client computer installed VPN that have MTU from 1300.

  Try to cut down the MTU of other systems that have no VPN client installed to 1300. If it's a Windows system, you can use Dr. TCP (free).

  Vikas

• I bought a new comp, I can not access my hotmail account on it, but I can you can reach it from other computers

  Hotmail cannot b viewed, the new computer

  I bought a new comp, I can not access my hotmail account on it, but I can you can reach it from other computers

  Hi GwenBright,

  1. what happens when you try to access the account? You receive messages or error codes?

  2. are you facing problems with hotmail account?

  If you are facing problems with your hotmail account, you can post your request in the Windows Live forum for assistance:

  Windows Live Support

  http://windowslivehelp.com/searchresults.aspx?query=cannot%20access%20account%20from%20New%20computer&ProductID=1

  Hope this information is useful.

• Unable to access server vm from other computers on the network.

  SE host: Windows 7 Edition home premium 64-bit

  VM Server OS: Fedora Core 9, with a NAT net configuration

  I can access the IP address of the server to the virtual machine to the host machine, but unable to hit if other computers on the network.  This is the first time doing this on a machine Windows 7, so please let me know if Miss me something, because I did it on other OS and it worked.

  Thanx

  As I posted in your second post...

  You need to configure port forwarding if you want to access the guest from outside the host. You must change the VMWare NAT configuration for this file (see you second post).

  The host can access the guest without the redirect because it shares the same (virtual) network (VMnet8) with comments. Do not externel systems. They must go through the physical host NIC first. This is where redirection comes in the game.

  AWo

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Can't access Win 7 computer from other computers (XP) on local network

  I can win it 7 computer but cannot access it.  I have the C: drive and the shared printer, but I get the error message "Access denied" big when I click on computer win 7 (named TowerServer) in my network places on the XP PC (i.e. My Network Places > network > Microsoft Windows network > WORKGROUP > TowerServer).  I followed all of the suggestions I could find in this forum, but not luck. No matter what I tried, I still access denied.  Can someone tell me what I'm missing?  I worked on it for days, and it's extremely frustrating.

  It seems that we are running around in circles, trying to do something that is essentially a simple thing. In view of the many pieces of advice you have received so far, I see little interest in adding yet another - I think that all respondents (including myself) are located on some of the details that is hidden somewhere in your message. I can see these options for you, listed in order of preference:
  (a) ask a computer-savvy friend to help you in person.
  (b) take the machine to a maintenance workshop for professional assistance.
  (c) call a paid Microsoft service.
  (d) living with the problem.
  (e) allow me to take a look at your machine with remote support with TeamViewer
  (www.teamviewer.com, using this file: http://www.teamviewer.com/download/TeamViewerQS.exe)
  If you want to examine e option), send a note to pegasusDOTfnlATgmailDOTcom.

• Unable to connect to MacBook from other computers on the network

  original title: I can access all windows for the PC and macbook computers, but I can't access the macbook on the PC.  How can I access the macbook via the PC?

  I have windows xp laptop and a macbook.  Computers portable windows communicate with each other and the mac book with correctly.  All windows shared folders are accessible from any one of the three laptops.  But we cannot access the macbook from the laptops of two windows.  All the parameters of the SMB are fixed according to the tutorials and the macbook is visible, but are not accessible! Help please.  Similar to that of all questions ask for specific things.  I don't know where this question.  Novice here I already searched the forums.

  Hello

  I suggest to refer to the thread and follow the steps provided by Jack MVP:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/unable-to-connect-Mac-to-PC-network/e4074883-0294-4AD3-b917-95913abbd9fd

  Note: using third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

• With Wake-On-LAN to reactivate the Group residential access to a computer to sleep...

  I have two laptops with Windows 7 (Pro 64).  I had both the join HomeGroup and could access shared folders.  I noticed that when a computer "sleep" disappears from the homegroup.  There is a note on the page of the homegroup password: "computers that are turned off or sleep does not appear in the homegroup.»  Elsewhere in TechNet I see information on WOL (Wake-on-LAN) of Windows capabilities on hardware that supports, and I selected "Allow this device to wake the computer" in Device Manager > network adapters > LAN_Adapter > power management tab.  But without success in waking a computer sleep to access remotely via homegroup.

  Does anyone know if remote activation is feasible and how to activate it?

  Thank you!

  John

  Hello

  Wire or wireless?

  If it wireless it will be the current wireless hardware does not work do not support this action.

  Thread might or might not work depending on the hardware.

  While many office computers would wake on network traffic, a lot of laptops would be not because they all plan material manufacturer to save energy.

  There is nothing more that we can do about it in addition to checking the suite (not the magic packet) tab in the power management of the network card.

  It is one of the issues that are still outstanding (hardware wise) in the entry level network business.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• When will Windows 7 be compatible with Internet access? When I go through access of __web it says "not supported on this operating system" __I just bought 2 new P 7 computers that cannot access the other computers on my network. __

  See above

  ·                                 This is the Forum for Windows Update .

  For questions of Windows 7, here is a link to a list of the Windows 7 Forums:

  http://social.answers.Microsoft.com/forums/en-us/w7network/threads

  Windows 7 Networking Forum at the link above.

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 forum for questions on windows 7.

  All Windows 7 issues (other than Windows 7 update issues) should be directed to the it.

  See you soon.

  Mick Murphy - Microsoft partner

• Other computers/devices in my home group / network is unable to identify my computer

  I don't think that changes have been made, but all of a sudden my scanner and another computer on my cable network do not recognize my computer. Any suggestions?

  -Mike

  Hello

   
  1. are you able to see the scanner and your computer from other computers on the home group?
  2. what version of Windows are you using?
  3. which antivirus app do you use?
  Method 1:
  Enable or disable network discovery
  http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discovery
  Method 2: You can also check by keeping the computer in the boot and disabling antivirus.
  Step 1:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Please go to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem.
  
  Step 2:
  You can check if any third-party security software is causing issues. I suggest that you have temporarily disable or uninstall the security software installed and check if the problem is resolved.
  Note: If you temporarily disable or uninstall all security software for troubleshooting so remember to allow him, after the resolution of the problems to end because your computer will be at risk.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

• Network management problem, computer laptop Windows 7 will not find other computers on any network, however all other computers on the network can access Windows 7 laptop.

  Basically, the issue I'm having is that my laptop does not connect to any other computer to access the actions or other files.  Other computers on the network can access my computer laptop shares and files without any problems.  Operating system is Windows 7 Home Premium x 64.

  What I tried:

  restarted
  uninstalling and reinstalling the files and printers, sharing maps and restart after completion
  all disabled firewall
  tried with IPv6 enabled and disabled without change, so it is currently enabled
  tried on a Wi - Fi and the differences are listed below in the section work (work is wireless)
  able to ping other comptuers
  access to other computers is permitted by other computers

  problem extends over several networks, IE I noticed it at home last night and the followed problem my laptop at work this morning.
  The problem is slightly different on the two sites.

  At home:
  I can see the other computers on the network, but I am unable to access it, even if I have permission, but other computers can access to my laptop.

  At work:
  Cannot even find other computers on the network but they can find and access my laptop.

  I have worked on this problem of non stop for several hours and did much more than what is said, but I am unable to remember everything.  I should have been taking notes: P

  Here are the results of the ipconfig/all command (I removed the physical addresses for security reasons):

  Windows IP configuration

  Name of the host...: Radiation-G72
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt
  Physical address.... :  **
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : hsd1.ga.comcast.net.
  Description...: Realtek PCIe GBE Family Controller
  Physical address.... :  **
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Atheros AR928X Wireless Network adapt
  Physical address.... :  **
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::f4e3:cd1c:6952:eb4d % 11 (Preferred)
  IPv4 address: 192.168.2.7 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Thursday, February 4, 2010 10:50:32
  End of the lease...: Friday, February 5, 2010 08:29:36
  ... Default gateway. : 192.168.2.1.
  DHCP server...: 192.168.2.1.
  DHCPv6 IOOKING...: 234890707
  DHCPv6 DUID customer...: 00-01-00-01-12-4C-6E-91-00-25-D3-3D-FC-9A
  DNS servers...: 192.168.2.1.
  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {1797D168-6FC8-4DDF-8338-4E214119C26D}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:4137:9e74:4ea:2920:b81a:cdc5 (Preferred)
  Address IPv6 local link...: fe80::4ea:2920:b81a:cdc5% 13 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled

  Card adapt 6TO4 tunnel:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Asked this question in the Windows 7 forum also because the problem was between windows 7 and Vista.

  Hello

  If it has started, you can try a system restore - an update "might" have caused the problem.

  1. try a system restore back to a point before that happened. And immediately thereafter enter
  Control Panel - Windows updates - top left settings and set it to download and informs you instead
  Automatic. Leave it until you are sure that everything is OK and then you can add them one at a time
  to troubleshoot BUT click right on and HIDE all the driver updates. Also stop at day of drivers like below
  and let this value - manually search for drivers when you think you need. (See how and why to)
  stop day of drivers below.)

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  To uninstall an update if you determine that there are problems - Panel - updated Windows - down left-
  Updates installed - uninstall

  I had completely forgotten the system restore!  While looking into the system restore, I found that when I moved into my new House and has cable Internet installed, the cable technology installed a program of comcast on my computer.  This caused me to not be able to connect with other computers.  After rolling back to install it before it works!   Thank you.

• SIN is not visible and 0 x 80070035 error reported when you try to access the visible computers on the network

  I have a wired and wireless network, managed by a Wireless Linksys E3000 router.  The network consists of 3 computers connected wirelessly, a cabin phone Vonage and a 2T NAS connected wire.  The names of the computers and operating systems are listed below.

  (A) Dave-PC, Win7 Pro

  (B) CPT - PC, Win7 Pro

  (C) DavesLaptop, Win7 Ultimate

  Computers A and B work quite as expected, they allow access to other computers and NAS.  The problems are air-conditioned and equipped with computer C.  Computer C cannot find the NAS and although he finds other computers, it generates an error 0 x 80070035 ("the network path is not found") when trying to access A or B clicking on the name of the computer in a window of the Explorer.  Interestingly, I can remote desktop in A and B via the context menu in the window Explorer of C.  I just spent a week trying to fix this.  I found several references to this problem on the Internet, but none of the solutions posted worked for me.  I have not found any recent posts so I hope there is a simple solution.

  Thanks in advance, Dave

  Here is the solution for "error code 0 x 80070035 network path not found" on Windows Vista and Windows 7 computers. Click on the button 'START', select 'CONTROL PANEL' and go to 'DEVICE MANAGER'. Click on "NETWORK CARDS", then click on 'VIEW' and select 'SHOW HIDDEN DEVICES'. In the expanded view, you will see a long list of numbered "MICROSOFT 6to4 ADAPTER". My Windows 7 Professional Office had 200 of them. Right click and select 'DELETE' on all but 1 of them. You can only do 1 at a time, so it takes some time. When you have only 1 left, restart the computer and enjoy being able to see the other computers on your network, including the RESIDENTIAL group files.

• vmware site is not accessible from other hosts

  The host is Windows 7, and the guest is CentOS. I managed to put in

  openSSH and apache on the rise and the site is visible to the host, but I can't

  access it from outside my LAN (I have a router) or inside my local network (since one

  another computer of course). How to configure Vmware & window7 then I have

  can access my virtual server on the internet?

  If you did what I said in my reply to you the other day this subject, you should be able to access by other computers on your local network, but not in itself for WAN connections and you will need to set up your router correctly to enable connectivity on the Internet virtual computer.

  You did as I suggested and read Chapter 14 you have a knowledge of virtual networks and then bridged Network Adapter to the virtual machine value and disable auto fill in the virtual network Editor?

  If this is not the case, go back and read: Re: vmware is accessible from the host machine, but not on other computers

  BTW, in the future do not start a second thread for discussion of the matter.

• access from localhost no

  Using blazeDS 3.2 and tomcat 6. Created an application that uses the authority of financial markets. Go to http://localhost:8080/ttt/client/register.html can see the inscription flash and able to do everything. But when access my computer from other computers on the net by name - http://asterix:8080/ttt/client/register.html - can see the flash of the record, but all calls to the server returns the error "send failed".
  What's wrong? Where to look?

  Problem solved. There was an error in services.xml

• The tables stored in memory but can be viewed from other sessions

  Dear Oracle experts,
  
  It's maybe a stupid question, but I'm looking for the best opportunity to create a kind of temporary table that can be accessed from other sessions.
  
  Could you give some advice / keywords to speed up my research.
  
  Thank you very much
  
  Daniel

  danielwetzler wrote:
  danielwetzler wrote:
  I'm afraid that caching is not appropriate for my case due to the machines of reasons cited in my other ads...

  First of all I don't think you need to worry about the effectiveness of caching in your particular case. In addition, Oracle is very skillful when actually writing the Sales blocks from the buffer on the disk cache, so if your amount of data written to the array of result is quite small and no other activity is happening on your system it will not get written to disk immediately anyway but remain in memory until a condition is met that trigger the writer of the database in order to eliminate the blocks on the disk.

  But there are options that you might consider if you want to avoid as much overhead as possible and write the result of your calculation in the table of results as soon as possible.

  You can use the path direct inserts (INSERT / * + APPEND * /) and set the table of results for "NOLOGGING". In this way, no cancellation and minimum never do again is generated.

  Note, however, that there are certain reservations and restrictions to consider when using this approach, for example your result table will be not recoverable (what you say is OK), that a single direct-path insert access is allowed at the same time (it blocks the table exclusively, no other possible DML until you commit the transaction / rollback), and the direct-path insert access has some restrictions. If any of them apply that prevent the direct path operation, then it silently returns to the 'classic' insertion mode that generates the undo and redo. One of the most annoying restrictions is that you can not read a table that was written for in the direct-path access mode in the same transaction, you must first validate the transaction, otherwise you get "ORA-12838: cannot read/change an object after edit it in parallel." In other words, adding simply the indicator APPEND you might break the existing logic.

  Finally the direct path insert never reuses the space in the blocks below the current high waters, which means that if you make a direct path insert and then remove rows from the table and repeat once again a direct path operation will increase your insertion and empty in the blocks already used space segment won't get reused. Best way would be to truncate the table rather than deletion of lines of it.

  There are of the available workarounds to overcome some of these direct-path insert limits (exclusive lock, truncated rather than remove etc.), as the use of a table partitioned (if you have an appropriate edition/license), because direct-path inserts of access may be limited to the partitions. In this case you can do simultaneous direct-path inserts if you use different partitions, but then you sort of logic that determines which partition to use.

  Kind regards
  Randolf

  Oracle related blog stuff:
  http://Oracle-Randolf.blogspot.com/

  SQLTools ++ for Oracle (Open source Oracle GUI for Windows):
  http://www.sqltools-plusplus.org:7676 /.
  http://sourceforge.NET/projects/SQLT-pp/

• Reformat a hard drive, but it still appears in "Tabs on other computers." How can I remove it?

  Recently, I reformatted the hard drive in a PC and do not break the link of the account synchronization before doing so. The machine continues to be present when I pull down the menu option "Tabs from other computers"., even if I have not installed Firefox hard disk cool. How do I remove it from the list?

  Hello!

  Unfortunately it is not possible at this stage. If something bothers you, next time you format a drive hard or generally remove a device from this point of view you should "untie this device" tab sync in the Preferences window.

  Because you cannot return to this specific Firefox profile, you can't do it, but don't worry, it will disappear eventually (the servers store information for ever).

  If you really want to remove it, you need to reset the account and reconnect all devices. To do this, you need to reset the recovery key and set up the account on your computer again. This is the process that we recommend when a device is lost. Make sure that you have a backup of your information before starting the: replace your synchronized data

  And for information about how to back up your profile, follow this link: back up and restore the information contained in the profiles of Firefox

  I hope it helps.
  Ibai