access from localhost no

Similar Questions

• How not to VMware Server 2.0.1 Web GUI access from localhost

  It seems that the vmware - hostd.exe only accepts requests from localhost and not from any PC on the network.

  How can I remove this limitation so that I can manage my withou being physically vmware servers with the server (Yes, that includes... Remote Desktop)

  Host operating system: Win Srv 2003

  VMWare server: 2.0.1

  Google did not all solutions...

  Thanks in advance

  Bjoern Dirchsen

  What if you try https://: 8333 or https://vmserver1:8333 (without option)

  Try to use the FULL domain name to connect.

  J.

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

  Post edited by: janlib

• Can access the IIS sites only from localhost

  I have a problem with IIS, when I publish a page on this subject, it is only available on the local host, for example:

  localhost:80

  Where 80 is the port, but I need to be able to access from outside the PC. Using anything other then localhost, as name of intellectual property or PC does not work. I get the error connection reset. I have disabled the firewall. It still does not. When using the command netstat - ano, I get the result that the site is listening on the address 127.0.0.1 and the port which I define in the bindings for the site. Even if I type in my IP in the links he always does this. I have no idea what to do now. Even the default ISS page not available.

  But when I install an Apache Server or tomcat I can access them without any problem from the outside.

  If anyone has any idea please help. I have a single network adapter.

  Try asking in the forum IIS:
  http://forums.IIS.NET/

• I'm not able to access my Google and Mozilla Gmail account, but be able to access from the internet explore.

  Last 5-6 months, I'm not able to access my Mozilla firefox google account, but access from IE.
  Following error messages appear...

  "We have detected a problem with your cookies settings.
  Enable cookies
  Make sure that your cookies are enabled. To enable cookies, follow these browser-specific instructions.
  Cookies and empty the cache
  If you have cookies enabled but are still having problems, clear the cache and cookies of your browser.
  Adjust your privacy settings
  If your cache and clearing cookies doesn't resolve the issue, try adjusting the privacy settings of your browser. If your settings are up, manually add www.google.com to your list of allowed sites. Learn more. »

   ... Kindly resolve my issue
  

  Kind regards
  Amit

  Another way to check the specific permissions for the site is to use the Page Info dialog box. While on a Google.com page, either:

  • Right click and select View Page Info > permissions
  • ALT + t (open the classic Tools menu) > Page Info > permissions

  In the dialog box that opens, check the permissions to "Set Cookies" and "Maintain offline storage" and adjust as required. (Example screenshot attached.)

• I want to remove access from my computer it does not turn off

  somehow my computer won't come until I close magnifying glass. I want to remove it from my computer

  Hello

  Click on start - go to the ease of Panel - easy access - from the center of control - make the computer easier to see - now uncheck turn on Magnifier - to finish click on apply.

  http://www.Vistax64.com/tutorials/125037-Magnifier-turn-off.html

  also read the tutorial above while turning the magnifying power.

• Of SSL VPN is not able to access from the outside

  Configuration SSL VPN, unable to access from outside, when trying to access the browser site, it says "cannot display the Page.

  Area basic firewall is configured, there must be something that I'm missing, please see the attached config.

  Any help please

  Looks like you will have to allow SSL VPN from the WAN traffic to the free zone (ZP-WAN-to-self), so you need to update the political map (PMAP-JM-WAN) in particular the ACL (ACL-VPN-PROTOCOL), must allow access to port 443 of any source IP address:

  permit tcp any  eq 443

  .. .should do the trick. Cheers, Seb.

• I want to spend my access from a mac (which I am getting rid of) to my PC - how?

  Hello

  Bought it is not if long - pdf services now to get rid of my mac and you want to access from a PC - how do I do this - doesn't seem like I can download it again.

  Hi deniseg42120976,

  May I know what are the services that you have purchased? Is - this subscription Pack PDF, export to PDF or Acrobat. Pack of PDF and export to PDF are online services that can be used by going to the web regardless of operating system. But if you have Acrobat subscription, you must install it on the PC from here: download Acrobat DC (DC) | Company or VIP

  Thank you

  Abhishek

• LDAP and APEX for access from home

  I am new to LDAP and only familiar with concepts so bear with me. I would like to know if I can use LDAP with an APEX application so that employees can access the LAN/intranet working system as well from home (or anywhere on the internet). They have access to the intranet via the LAN by signing on the use of their Novell username and password. I'm assuming that they can connect to the House using the same Novell username and password. (BTW-I don't want to set up APEX user ID or database user ID for users of 1800-1900). This can be accomplished? If so, how?
  
  I have a meeting with the vice-principal of the week next to discuss this project which it can manage access from the internet.
  
  
  Thank you in advance.
  
  Robert
  http://apexjscss.blogspot.com

  Hi Robert,.

  Yes, he is indifferent to the APEX where a user comes from. As I mentioned above, authentication is performed in the database by data that shows through the front. As long as the front-end server reaches the end back, your users can connect.
  The onlyl restriction that can be there is the Novell (LDAP) server not accepting does not request to the database server. But if you have LDAP works on your APEX for a LAN/WAN access, he will work with the reverse proxy as well.

  -Udo

• Import an Access from Oracle database

  Hello
  
  I would like to know if there is a way to import an Access from Oracle database
  
  
  Thanks forward

  The easy and simple way to do this is using Sql Developer

  Please see the link is a guide step by step to achieve what you want

  http://www.Oracle.com/technology/tech/Migration/Workbench/Viewlets/accessconnlauncher.html

  http://www.Oracle.com/technology/tech/Migration/Workbench/Viewlets/msaccesslauncher.html

  Concerning

• Cannot install bios access from win 8

  HP Touchsmart tm2 laptop and although age has officially supported, was able to install Windows 8.0 but now cannot move to 8.1 Windows because I can't boot from the CD/DVD or USB flash drive.

  The store Windows says that my 8.0 cannot be updated to 8.1 via the shop, so I want to do a fressh 8.1 installation and have purchased the software and the key.  But I can't get the laptoip to boot on the USB CD/DVD or a USB flash drive (or even a floppy disk)

  Since the installation of 8.0, when the computer starts, a HP logo appears, but there is no option to enter the BIOS setup or to specify the boot sequence.   I have no reason to believe that I changed the boot sequence, so there should resemble any of these external devices first, but this is not (there's a brief access to the CD/DCD, but it goes to start with the hard drive).

  It seems that Win 8.0 installation has done something in the BIOS.  Have tired etc. ESC, F2, F10, Del, F6 during the boot process, even if the messages do not appear.   Maybe I could reflash the BIOS?  Or is it an executable I could run wtining Win 8.0 to access the BIOS, otherwise I'm stuck.

  Anyone with a similar problem/solution?

  Thank you

  Was able to get. Window very tight to get into the boot on this computer compared to other menu that I worked.  Configuration via USB seems continues normally.

  I already installed Win 8.1 on a HP TouchSmart300 desktop model and found that the microphone does not (confirmed elsewhere in this forum).  Using a wirelss headset Plantroincs has proved a good solution.  Anticipating I could met the same problem on the laptop.  Now soon.

  Thanks again.

• Unauthorized access from another computer

  I found "Account unknown" as an additional user profile. I believe that my nephew has access to my computer from his computer. I was online and I started while he was on his computer. If I'm on my laptop and it is not on his computer, my laptop works very well. As soon as it connects to his computer, then my laptop runs slowly. According to me, he is accessing my computer somehow. I use Windows XP Home Edition, Version 2002, Service Pack 3. I have the disabled guest user and I have a password to log on to my laptop. Do you know something about the conversion from FAT to NTFS disks? My laptop is not configured for networking and authorize remote assistance is disabled (not allowed). Is it possible that I can see if his computer access my laptop? Thanks in advance for your answer.

  Looks almost like it's using Remote Desktop, but XP Home does not allow that.

  Since you have XP Home Edition, file sharing Simple is applied and remote users can authenticate only as long as the user "guest".  You say you have 'Off' Guest user  How did you do that?  If you did it in the user control panel, which does not disable access to the network - only for interactive access.  To really disable the guest user and deny access to the network, you must open a command prompt window (start-> Run-> "cmd") and enter the command:
  NET user guest / active: No.

  Another approach would be to put a password on the guest user:
  "Set up the password for the user in Windows XP"
    <>http://support.Microsoft.com/kb/555520 >

  You must also make sure that the user 'administrator' built-in gave a password as well, or it may log and undo what you've done.  Also check the "Administrators" group and ensure it doesn't have access to one of the accounts listed there.  List of the members of the Administrators group, open a window to prompt as above and enter the command:
  net localgroup administrators
  which lists all of the users in the Administrators group.

  To see who is connected to your computer, right click on 'My Computer'-> manage-> user Sessions

  A "Account unknown" user profile means that a user who has used to have a profile has been removed from the machine.

  About FAT to NTFS:
  "How to convert a FAT16 or FAT32 of NTFS volume in Windows XP"
    <>http://support.Microsoft.com/kb/307881 >

  HTH,
  JW

• Group residential access from other computers is read-only.

  Two machines, home network, both running Win7 Pro 64.

  Both machines have multiple accounts.  On the machine at the bottom are the accounts under the name of Tom, Dick and Harry.  (Not really, but they are good examples, yes?)  On the machine of the floor are the accounts under the name of Tom and Dick.

  Tom is the main user on the machine at the bottom.  Dick is the main user on the machine on the floor. Tom & Dick should have permission to read/write to all files in the home group (two machines).  Harry, as an ordinary member of the residential group should only have read permission.

  If I right click on the Tom's Documents folder on the machine of dDwnstairs, I see the following permissions:

  Homegroup: read; Tom: Owner; Dick: Read/write

  Yet, when Dick tries to access to the file of the machine on the floor, Dick read only privileges.  Specifically, if she tries to drag a file on homegroup--> Tom (BOTTOM)--> Documents folder, Dick Dick receives a "Destinatino folder Access Denied" dialog box that says: "You must be authorized to perform this action."  Dick can see and navigate to the folder without problem.

  If Dick logs into his account on the box at the bottom, it can read/write files of Tom as expected.

  Is there a way to associate the account in the box on the floor with the account on the box at the bottom, so that file permissions are identical regardless of the situation?

  Correct, both accounts must be related. And I'm also unclear on the declaration of help text, maybe I'm missing something.

  Regarding the setting up of a working group, you are right that the steps are VERY similar. The difference is when you're on a homegroup, the system uses the credentials of home group and not the credentials of the account from your system to connect to a share. So in theory, if you remove all systems in residential group and configure the network in the way that you said in your original post, you should be able to share normally with the permissions that you set up.

  Just remember, when you're on a homegroup, the system uses a called hidden user accountHomegroup$. When it connects to a share on another computer, it is not identified asTom, it connects asresidential group $. This is obviously different from a working group that uses the credentials of the current user to connect (Tom).

  Let me know if I answered your question, I think I have everything! :)

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why the fonts blurry when you use remote Windows for ofc computer access from home?

  I use Windows remote access to my desktop (Windows 7) from home (also Windows 7). The fonts are blurry. When I use the remote Windows to access Outlook only, the fonts are clear and sharp.

  Hello
  Please try these:
  1. click on start, type Remote Desktop connection.
  2 open remote desktop connection, click options.
  3. click on the tab advanced; Put a check mark on the font smoothing.
  4 if it is already checked, then uncheck the font smoothing

   
  Reference: http://windows.microsoft.com/en-US/windows7/Remote-Desktop-Connection-frequently-asked-questions  

• Client VPN prevents internet access from other computers on the network

  Hello.

  I run Client ver 4.6.03.0021 from an office on a network of 11 computers via a hub 16-port. Internet access is through an ICS gateway to the cable modem. Once I changed the modem cable to test a backup and then switched back to the original modem. After this, only computers that have the VPN Client (running or not) could access the internet. Computers that have no customer VPN can access only certain sites. Commonly viewed sites would say "site found. Waiting for answer", but the answer would never come and IE 6.1 cling. When I would try ping sites, it would fail. However, some sites such as Google.com would work.

  On one of the computers, on a whim of head, I installed the VPN Client but have not set up a connection. Now, this computer will connect to any website I want.

  Is there a fix easier to get access to other computers on the network without installing the VPN Client on each of them?

  Thank you

  H. Adams

  Hello

  Looks like you are running in MTU problem. The reason I say it is, automatically reduces the MTU value to 1300 VPN client during the installation for the whole system. That is to say all the client computer installed VPN that have MTU from 1300.

  Try to cut down the MTU of other systems that have no VPN client installed to 1300. If it's a Windows system, you can use Dr. TCP (free).

  Vikas

• AnyConnect VPN access from inside

  Hello

  I have an ASA 5540 + SSM-40 on which I have configured webvpn and is listening for connections on the external interface.

  It is accessible from outside (internet) network and works just fine. The problem is, I want to access it from inside the network as well, but it does not work. I can't ping or connect somehow to the IP address of the external interface of the inside (so I guess that it is not strictly bound to the webvpn configuration).

  I don't think it's an ACL problem because ACL filtering only that I do is on the OUTSIDE / inside (to the internet), the rest are defined to allow a.

  Can someone please tell me what I need to do to be able to access the IP address of the external interface of the network behind the inside interface?

  Thank you

  Yes, you can

  Under the webvpn configuration, just "allow inside" as well.