Groups in law does not

Similar Questions

• Having hard time you sign in to one account on my computer. "The group policy service does not have log on." Access denied. "

  Trying to connect to one of the accounts on my computer and the message telling me "the group policy service does not have the journal on.»  Access denied. "  Can someone help me with this?

  Hello

  1. is the computer connected to a network domain?

  2 are you facing this problem into account administrator? Do you have other administrator accounts enabled in the computer?

  3 did you changes to the computer before the show?

   
   
  Method 1:
  
  Check if you are able to start the computer in safe mode.
   
  Step 1: Safe Mode
  
  Start your computer in safe mode and check the number.

  To start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   
  If you are unable to boot into safe mode, please let us know.

  Step 2:
  

  You run the system restore in Windows recovery environment?

  If this isn't the case, I would say you can do a system restore to the Windows recovery environment. Follow the steps in the section provided.

  http://support.Microsoft.com/kb/940765/en-us

  
   
  I hope this helps!

• How can I correct a problem accessing my firewall settings because the Group Policy client does not connect to windows?

  I have tried everything recently adjust the settings of the firewall from my window and a box appears saying that after an unidentified error, I can't access my firewall. After some research, I discovered that it was because my client group policy server does not connect and a small box appears saying that whenever I connect to my laptop. It is not effect my use of the internet at all, so I've never bothered to see what that meant until now I need to access my firewall. I tried to adjust the settings in group policy, but everything is gray and I can't change anything. I use an admin account so I don't know why I can't set the parameters. I'm completely stuck and I don't know that much about computers. Is there anything else I can try? I also tried a system restore, but it lasts for a long time and I can return only 5 days. Thank you

  Hi Sheldon,

  Are you connected or connected to a work network or domain? If so, this could be a policy governed by your network administrator, and you will not be able to change it.
  You might try to tell scientists on TechNet on your question to see if they have a better answer for you:
  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads

• Hello, I'am getting a little crazy because Group/scrolling text does not. I looked at several videos of Adobe evangelists now to make a scrolling text or group.  I ' am in collaboration with InDesign CC and it looks like my 'Overlay tools' do not work.  W

  Hello, I'am getting a little crazy because Group/scrolling text does not. I looked at several videos of Adobe evangelists now to make a scrolling text or group.  I ' am in collaboration with InDesign CC and it looks like my 'Overlay tools' do not work.  When I see the preview, I can't scroll but only to select text. My steps are simple: I put my text in a selected area. PLACE IN > that select > Folio overlays > floating framework. It does not scroll. What I've done wrong?

  

  DAT danced some overlays avenues (!) reviews Regolamento zijn voor DPS books, due noch het SWF-noch het ePUB-voorvertoningsvenster laten zien said. Het due zal ook niet werken in bv. en PDF een in een ePUB avenues in FXL - epub puts extra een saw CSS code. DHS avenues from DPS DPS 2015 (article) maar voorvertonen zal het niet anyway (folio).

  Werk I niet met DPS (peper, peperduur!) vergeet dan het hele Overlay window DHS.

• Groups of tabs does not

  Tab groups stop working today, by clicking on the tab button groups or 'Ctrl + Shift + E' do nothing. Using FF 9.0.1

  I used groups of tabs before with great success. Recently, I can type in the ' group name, but the name does not appear on the tab group again more as soon as I reduce the group.» I don't have the add-on removal... I checked. Any ideas? Thank you

• Group video call does not

  Hello! I recently bought a laptop with Windows 8.1 with Skype application pre-installed. When when I video call to one person, everything works normally, and I am able to see the other person. However, when you make a group call, I'm the only one who cannot see any of the parties, even if I am able to hear. I have the latest Skype application. Also, I can't receive pictures. Where is the problem?

  The problem is that the 'modern' for Windows 8/8.1 native Skype application does not support the group video calls. If you want this feature to be available, then you can install the desktop version.

  The currently most recent Skype 6.14.0.104 desktop version can be installed using the msi installer:

  http://download.Skype.com/MSI/SkypeSetup_6.14.0.104.msi

• DB groups updates appearing does not in OBIEE

  In the BI server, we have an authorization block that returns a database user groups. If we add or change memberships in the database table does not appear these changes to the user unless I have order and access your room or update the number of rows for this group in the BI Server. Caching is not enabled for the database or in the file NQSconfig.

  What do you mean by "the changes do not appear? Do not appear where? Do you use a group variable initialization? If so, have you disabled caching for it?

  -Dave

• VISTA SP2 GROUP POLICY CLIENT DOES NOT.

  While LOG IN ADMINISTRATIVE ACCOUNT TYPE gpedit.msc then it does not

  any solution

  Microsoft support offers a FREE support for Vista SP2 issues at: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1.  Take advantage of it while it lasts stilll.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Group data model does not

  Hello

  I am developing a revision update for my app BB10 stunts and I use a data model to pull in the elements of the application do not forget; the only problem I encounter is that I can't get the data model of the group work so that I can arrange the items by the first character instead the data are currently presented as Z - A, even if I could get it to display in A - Z would be enough, but what I am looking to achieve is to get the model to display in A - Z and then sort by the first character, while a header for each letter is displayed.

  Here is the list (QML) and my data model (C++)

  ListView {
                              dataModel: _noteBook.model
  
                              listItemComponents: ListItemComponent {
                                  type: "item"
  
                                  StandardListItem {
                                      title: ListItemData.title
                                      description: ListItemData.status
                                  }
                              }
  
                              onTriggered: {
                                  clearSelection()
                                  select(indexPath)
  
                                  _noteBook.setCurrentNote(indexPath)
  
                                  _noteBook.viewNote();
                                  navigationPane.push(noteViewer.createObject())
                              }
                          }
  

  NoteBook.cpp

  #include "NoteBook.hpp"
  
  #include "NoteEditor.hpp"
  #include "NoteViewer.hpp"
  
  #include 
  
  using namespace bb::cascades;
  using namespace bb::pim::notebook;
  
  //! [0]
  NoteBook::NoteBook(QObject *parent)
      : QObject(parent)
      , m_notebookService(new NotebookService(this))
      , m_model(new GroupDataModel(this))
      , m_noteViewer(new NoteViewer(m_notebookService, this))
      , m_noteEditor(new NoteEditor(m_notebookService, this))
  {
      // First Character grouping in data model
      m_model->setGrouping(ItemGrouping::FirstChar);
  
      // Ensure to invoke the filterNotes() method whenever a note has been added, changed or removed
      bool ok = connect(m_notebookService, SIGNAL(notebookEntriesAdded(QList)), SLOT(filterNotes()));
      Q_ASSERT(ok);
      ok = connect(m_notebookService, SIGNAL(notebookEntriesUpdated(QList)), SLOT(filterNotes()));
      Q_ASSERT(ok);
      ok = connect(m_notebookService, SIGNAL(notebookEntriesDeleted(QList)), SLOT(filterNotes()));
      Q_ASSERT(ok);
  
      // Fill the data model with notes initially
      filterNotes();
  }
  //! [0]
  
  //! [1]
  void NoteBook::setCurrentNote(const QVariantList &indexPath)
  {
      // Extract the ID of the selected note from the model
      if (indexPath.isEmpty()) {
          m_currentNoteId = NotebookEntryId();
      } else {
          const QVariantMap entry = m_model->data(indexPath).toMap();
          m_currentNoteId = entry.value("noteId").value();
      }
  }
  //! [1]
  
  //! [2]
  void NoteBook::createNote()
  {
      // Prepare the note editor for creating a new note
      m_noteEditor->reset();
      m_noteEditor->setMode(NoteEditor::CreateMode);
  }
  //! [2]
  
  //! [3]
  void NoteBook::editNote()
  {
      // Prepare the note editor for editing the current note
      m_noteEditor->loadNote(m_currentNoteId);
      m_noteEditor->setMode(NoteEditor::EditMode);
  }
  //! [3]
  
  //! [4]
  void NoteBook::viewNote()
  {
      // Prepare the note viewer for displaying the current note
      m_noteViewer->setNoteId(m_currentNoteId);
  }
  //! [4]
  
  //! [5]
  void NoteBook::deleteNote()
  {
      m_notebookService->deleteNotebookEntry(m_currentNoteId);
  }
  //! [5]
  
  bb::cascades::GroupDataModel* NoteBook::model() const
  {
      return m_model;
  }
  
  QString NoteBook::filter() const
  {
      return m_filter;
  }
  
  //! [6]
  void NoteBook::setFilter(const QString &filter)
  {
      if (m_filter == filter)
          return;
  
      m_filter = filter;
      emit filterChanged();
  
      // Update the model now that the filter criterion has changed
      filterNotes();
  }
  //! [6]
  
  NoteViewer* NoteBook::noteViewer() const
  {
      return m_noteViewer;
  }
  
  NoteEditor* NoteBook::noteEditor() const
  {
      return m_noteEditor;
  }
  
  //! [7]
  void NoteBook::filterNotes()
  {
      NotebookEntryFilter filter;
  
      // Use the entered filter string as search string
      filter.setSearchString(m_filter);
  
      const QList notes = m_notebookService->notebookEntries(filter);
  
      // Clear the old note information from the model
      m_model->clear();
  
      // Iterate over the list of notes
      foreach (const NotebookEntry ¬e, notes) {
          // Copy the data into a model entry
          QVariantMap entry;
          entry["noteId"] = QVariant::fromValue(note.id());
          entry["title"] = note.title();
          entry["status"] = NoteViewer::statusToString(note.status());
  
          // Add the entry to the model
          m_model->insert(entry);
      }
  }
  //! [7]
  

  NoteBook.hpp

  /* Copyright (c) 2012, 2013  BlackBerry Limited.
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  * http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
  
  #ifndef NOTEBOOK_HPP
  #define NOTEBOOK_HPP
  
  #include 
  #include 
  #include 
  
  #include 
  
  class NoteEditor;
  class NoteViewer;
  
  /**
   * @short The controller class that makes access to notes available to the UI.
   */
  //! [0]
  class NoteBook : public QObject
  {
      Q_OBJECT
  
      // The model that provides the filtered list of notes
      Q_PROPERTY(bb::cascades::GroupDataModel *model READ model CONSTANT);
  
      // The pattern to filter the list of notes
      Q_PROPERTY(QString filter READ filter WRITE setFilter NOTIFY filterChanged);
  
      // The viewer object for the current note
      Q_PROPERTY(NoteViewer* noteViewer READ noteViewer CONSTANT);
  
      // The editor object for the current note
      Q_PROPERTY(NoteEditor* noteEditor READ noteEditor CONSTANT);
  
  public:
      NoteBook(QObject *parent = 0);
  
  public Q_SLOTS:
      /**
       * Marks the note with the given @p indexPath as current.
       */
      void setCurrentNote(const QVariantList &indexPath);
  
      /**
       * Prepares the note editor to create a new note.
       */
      void createNote();
  
      /**
       * Prepares the note editor to edit the current note.
       */
      void editNote();
  
      /**
       * Prepares the note viewer to display the current note.
       */
      void viewNote();
  
      /**
       * Deletes the current note.
       */
      void deleteNote();
  
  Q_SIGNALS:
      // The change notification signal for the property
      void filterChanged();
  
  private Q_SLOTS:
      // Filters the notes in the model according to the filter property
      void filterNotes();
  
  private:
      // The accessor methods of the properties
      bb::cascades::GroupDataModel* model() const;
      QString filter() const;
      void setFilter(const QString &filter);
      NoteViewer* noteViewer() const;
      NoteEditor* noteEditor() const;
  
      // The central object to access the notebook service
      bb::pim::notebook::NotebookService* m_notebookService;
  
      // The property values
      bb::cascades::GroupDataModel* m_model;
      QString m_filter;
  
      // The controller object for viewing a note
      NoteViewer* m_noteViewer;
  
      // The controller object for editing a note
      NoteEditor* m_noteEditor;
  
      // The ID of the current note
      bb::pim::notebook::NotebookEntryId m_currentNoteId;
  };
  //! [0]
  
  #endif
  

  If something you can help me with then this would be very useful - if you need to see more of code then let me know too!

  Thanks in advance

  Try to add in constructor (after a call to setGrouping):

  QStringList keys;
  key<>
  m_model-> setSortingKeys (keys);

  May require alterations, I have not tried this compilation.

• See Group Policy Persona does not

  Hello, wanted to begin test Persona display management, of what it looks like its not difficult to install, however I can't find the group policy, the Viewpm.adm.

  In accordance with the instructions, it will be in one of two places.  Either on the desktop from view after the Agent Install in C:\program VMware View\agent\bin

  or on the servers of connection in C:\program VMware View\server\extras\grouppolicyfiles

  The Viewpm.adm is not in these two places.  There is a v4v_desktopagent.adm, but it is not good policy.

  We run View Horizon Suite version 6.0

  Ive tried to install the last Agent to view one of the virtual machine is to see if that would install the Viewpm.adm, it didn't, and didn't manage Persona for the agent.

  Ive looked in other servers for it as well as our server composer\vcenter and security servers.

  I don't see a download of VMware for it.

  Something has changed with the release of version 6 and its in a different place?  Allocate instructions wheel I had version 5-oriented

  Thank you

  :

  There is a readme in this place who said the following.

  You can download the VMware-Horizon-display-options-Bundle --.zip file on the download site of VMware Horizon (with view) at http://www.vmware.com/go/downloadview.

• Report of the Group of left does not sort descending

  Hello seniors...
  
  I have the following query which produces the result as you wish below at the SQL level; I aim to lines to be copied in descending order...

  SQL> SELECT Z.ACATG_TYPE, Y.EXPN_CATG, z.ACATG_DESC, y.expn_code, y.expn_name,
    2  DECODE(Z.ACATG_TYPE,'I', x.closing) Income,
    3  DECODE(Z.ACATG_TYPE,'E', x.closing) Expense
    4  FROM(
    5  SELECT PSN_PARTY, expn_name, SUM(nvl(NETT,0)) nett,  SUM(nvl(DEBIT,0)) debit,  SUM(nvl(CREDIT,0
  )) credit, 
    6  SUM((nvl(NETT,0)+nvl(DEBIT,0)-nvl(CREDIT,0))) CLOSING
    7  FROM (
    8  SELECT PSN_PARTY, 0 nett, SUM(nvl(debit,0)) DEBIT, SUM(nvl(CREDIT,0)) CREDIT
    9  FROM(
   10   SELECT PSN_TXN_DATE,PSN_PARTY, nvl(DEBIT,0) debit, nvl(CREDIT,0) credit
   11   FROM 
   12       (
  .
  .
  .
   94  where PSN_PARTY = expn_code
   95  GROUP BY PSN_PARTY, expn_name) x, expense_master y, Accounts_category z
   96  where x.psn_party = y.expn_code
   97  and   y.expn_catg = z.acatg_code
   98  and   z.acatg_type in ('I','E')
   99  ORDER BY Z.ACATG_TYPE DESC, Y.EXPN_CATG,y.expn_code;
  
  ACA EXPN_C ACATG_DESC                     EXPN_C EXPN_NAME                             INCOME       EXPENSE
  --- ------ ------------------------------ ------ ------------------------------ ------------- ------
  I   90     Income                         AC2000 Sale                                1333.000
  E   10     Expense                        AC0003 ELECTRICIRTY BILL                                   30.000
  E   10     Expense                        AC0005 TELEPHONE BILL                                      16.000
  E   10     Expense                        AC0007 TEA & SNACKS                                        17.000
  E   10     Expense                        AC0009 REPAIRS & MAINTENANCE                               15.000
  E   10     Expense                        AC0010 MOBILE BILL                                         45.000
  E   10     Expense                        AC0011 REFUND                                             220.000
  E   10     Expense                        AC0019 OFFICE EXPENCE                                      15.000
  E   40     Staff Salaries                 AC0006 STAFF SLALARY                                      250.000
  
  9 rows selected.

  But when I've made use of the query above in my report with an Option of left group, I understand not sorted in descending order.
  With a tabular report, it sorts correctly as indicated above.
  
  Schot screen for a better idea of my report is attached for reference.
  
  [http://i995.photobucket.com/albums/af71/rhnshk/INCEXP.jpg |-overview of the report]
  [http://i995.photobucket.com/albums/af71/rhnshk/INCEXP1.jpg |] ReportWizard-DataModel]
  [http://i995.photobucket.com/albums/af71/rhnshk/INCEXP2.jpg |] ReportWizard-groups]
  [http://i995.photobucket.com/albums/af71/rhnshk/INCEXP3.jpg |] ReportWizard-fields]
  [http://i995.photobucket.com/albums/af71/rhnshk/INCEXP4.jpg |] ReportWizard-totals]
  
  I want the lines with acatg_type = 'I' to be displayed first.
  
  Sorry for fixing is not SQL full, but no problems, or even not at all necessary, I can do the same.
  Given that this is a long online created SQL view. thought that the solution might come out showing as much a part only.
  
  I use report 6i to 10g.
  
  Please help me.

  Hello

  Verify that the order of the fields in the "data model", in the respective application group ACATG_TYPE column should be first by EXPN_CATG, then expn_code.
  Also check the order of the breaking of all columns.

  I hope this helps.

  Best regards

  Arif Khadas

• Help with the situation where a simple group by statement does not work

  There is a table with two columns, which is memo (varchar2), another is recording_date (date). This table is used to recode an every day event. Right now, I need to know how many events registered each day during the time period (between any of the given day and any given end day). the result by selecting should have two columns the numeration of the event, the recording_date. chances are one day it is not just any event, in this situation there not all inserted rows so far here, but the result by selecting must contain also that day with the column count is set to zero.

  between 2010-4-5 and 2010-4-8
  Count   recording_date
  2             2010-4-5
  0             2010-4-6
  1             2010-4-7
  9             2010-4-8

  Can anyone help with this? Thank you in advance!
  Kind regards!

  Hello
  See if this helps:

  I create a dummy cursor that contains one row for each day of the last year - I then outer join the result of the query against the log_table.

  Here are my RAW file
  Select * from log_data

  07/05/2010 1, TEST
  TEST 2 05/05/2010
  02/05/2010 3, TEST
  30/04/2010 4, TEST
  TEST OF 5 30/04/2010
  30/04/2010 6, TEST
  7-30/04/2010 TEST
  8 TEST 06/05/2010
  9 TEST 06/05/2010
  10 06/05/2010 TEST
  11 06/05/2010 TEST
  06/05/2010 12, TEST
  13 TEST 06/05/2010
  2010-05-06 14, TEST
  15 06/05/2010 TEST
  16 06/05/2010 TEST
  2010-05-06 17, TEST

  And here's the query

  with date_ranger as (select trunc (sysdate-) level datecol
  from dual connect by level<= 365="">
  RAW_DATA as)
  Select recording_date, count (*) numrows in log_data
  Group of recording_date)
  Select datecol, date_ranger numrows, raw_data
  where = date_ranger.datecol raw_data.recording_date (+)
  and datecol sysdate-10-sysdate
  order by 1

  And the result

  1 28/04/2010
  2 29/04/2010
  30/04/2010 3, 4
  4 01/05/2010
  02/05/2010 5, 1
  6 03/05/2010
  7 04/05/2010
  8 05/05/2010 1
  9 06/05/10/2010

  What you want?

  See you soon,.
  Harry

• lost capacity to send a group email that does not not not not having @.

  In Thunderbird, I get along fine for years when sending an email and enter a group name (containing my list of recipients), but all of a sudden when you enter a group name in my send to the box, I get a refusal to send, as this isn't in the form of an email (that contains @) how to make this work again. Tried a reinstal but no change.

  Hello

  I'm sorry to hear about this. Several other people have reported this problem, I answered with a workaround suggested by one of them in this thread.

  Please follow here, it would be useful if you have any other details (OS version, exact TB version) and if you could confirm that the workaround is valid.
  
  
  
  Please contact the Mozilla Support and once again, apologies for that!

• Port-group on newly created vDS does not work

  Hello

  I have 4 hosts ESXi with version 5.1. The VCenter had the same version 5.1 but the server crashed a few months back, and reinstalled the VCenter engineer new version 5.5 U2. I also have virtual Distributed Switch configured with several groups of ports (VLAN). VLANS are separated by the ID VLAN different. All virtual machines with their VLAN respective can communicate to the breast even VLAN, but also the other VLANs.

  However, I just created a new group of Port with different VLAN ID. Now, the virtual machines in this new VLAN cannot communicate themselves as well as other VLANs. From the virtual machines ping response say "Destination host" inaccessible

  When I move the virtual machines to another VLAN they start working and when I move them back to this new VLAN they do not.

  I also tried assigning VLAN IDS to another VLAN to this group of port newly created, beginning of VMs works again. But the VLAN ID of this group of ports does not work with other groups of Port.

  To me, it seems that the creation of new VLAN ID has some problems. Although I followed the documented process of VMWare.

  I noticed that I have the following versions:

  1 VCenter Server: worm 5.5

  2 Server ESXI host: ver 5.1

  3 vDisbritued Switch: ver 5.0

  Have idea if it's a bug or compatibility problems. Am I missing something?

  Thank you

  I was talking about this doc-

  https://supportforums.Cisco.com/document/115461/configuring-VLANs-UCS-and-VMware

  I hope this help you.

  Thank you

  Hentzien

• Windows Update does not not IE8/XP error 0X800A0046

  After cleaning my computer from various virus infections and to try a bunch of bugs Windows update no longer works.  I get error 0x800A0046 and have tried every solution I can find on the net including http://support.microsoft.com/kb/883821 all to nothing makes someone an idea there?

  The four methods suggested in KB 883821 have following results:

  Method 1. Local groups and users does not exist under Computer Management (maybe it's because it's XP home no Pro)
  Method 2: I had success whenever I tried.  Under each user in turn and tries to be updated between each.  No joy.
  Method 3.  There is no secpol.msc on this computer (maybe same reason than method 1)
  Method 4: RPC Properties window is grayed out but Log on / the Local System account is checked

  Any help is welcome

  Thanks for your follow-up. You're welcome and thanks for your comments, too.