VISTA SP2 GROUP POLICY CLIENT DOES NOT.

Similar Questions

• How can I correct a problem accessing my firewall settings because the Group Policy client does not connect to windows?

  I have tried everything recently adjust the settings of the firewall from my window and a box appears saying that after an unidentified error, I can't access my firewall. After some research, I discovered that it was because my client group policy server does not connect and a small box appears saying that whenever I connect to my laptop. It is not effect my use of the internet at all, so I've never bothered to see what that meant until now I need to access my firewall. I tried to adjust the settings in group policy, but everything is gray and I can't change anything. I use an admin account so I don't know why I can't set the parameters. I'm completely stuck and I don't know that much about computers. Is there anything else I can try? I also tried a system restore, but it lasts for a long time and I can return only 5 days. Thank you

  Hi Sheldon,

  Are you connected or connected to a work network or domain? If so, this could be a policy governed by your network administrator, and you will not be able to change it.
  You might try to tell scientists on TechNet on your question to see if they have a better answer for you:
  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads

• Having hard time you sign in to one account on my computer. "The group policy service does not have log on." Access denied. "

  Trying to connect to one of the accounts on my computer and the message telling me "the group policy service does not have the journal on.»  Access denied. "  Can someone help me with this?

  Hello

  1. is the computer connected to a network domain?

  2 are you facing this problem into account administrator? Do you have other administrator accounts enabled in the computer?

  3 did you changes to the computer before the show?

   
   
  Method 1:
  
  Check if you are able to start the computer in safe mode.
   
  Step 1: Safe Mode
  
  Start your computer in safe mode and check the number.

  To start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   
  If you are unable to boot into safe mode, please let us know.

  Step 2:
  

  You run the system restore in Windows recovery environment?

  If this isn't the case, I would say you can do a system restore to the Windows recovery environment. Follow the steps in the section provided.

  http://support.Microsoft.com/kb/940765/en-us

  
   
  I hope this helps!

• Group Policy client could not start

  Hello

  I have a problem of Group Policy Client on a stand-alone computer with Windows 7 SP1. When the computer starts, the main account can be accessed as usual, but once the office is reached, a notification bubble appears indicating that Group Policy Client didn't start and that standard user accounts cannot be loaded. Administrator accounts have worked normally until recently, where administrator privileges have begun to not be available in Mozilla Firefox.

  Do you know how to fix this?

  Hi Kiran,

  Thanks for the reply.

  Make sure that the Group Policy client service is running.

  See the following steps:

  a. click Start, type runand press enter

  b. type services.msc , and then click OK.

  c. search customer service strategie strategy group, right-click on it and click Properties.

  d. Make sure that Service status is started and the startup type is automatic

  e. click on apply and OK.

  Thank you.

• See Group Policy Persona does not

  Hello, wanted to begin test Persona display management, of what it looks like its not difficult to install, however I can't find the group policy, the Viewpm.adm.

  In accordance with the instructions, it will be in one of two places.  Either on the desktop from view after the Agent Install in C:\program VMware View\agent\bin

  or on the servers of connection in C:\program VMware View\server\extras\grouppolicyfiles

  The Viewpm.adm is not in these two places.  There is a v4v_desktopagent.adm, but it is not good policy.

  We run View Horizon Suite version 6.0

  Ive tried to install the last Agent to view one of the virtual machine is to see if that would install the Viewpm.adm, it didn't, and didn't manage Persona for the agent.

  Ive looked in other servers for it as well as our server composer\vcenter and security servers.

  I don't see a download of VMware for it.

  Something has changed with the release of version 6 and its in a different place?  Allocate instructions wheel I had version 5-oriented

  Thank you

  :

  There is a readme in this place who said the following.

  You can download the VMware-Horizon-display-options-Bundle --.zip file on the download site of VMware Horizon (with view) at http://www.vmware.com/go/downloadview.

• Vista SP2 installed, now AutoSave does not work

  Since I installed Vista 32 bit SP2 the scheduled file backup fails. I get an error message a snapshot could not be established, and a suggestion to try again or change the settings, but nothing works.

  Hi Gak44,

  Thanks for posting your question on the Forums of Windows Vista.

  I need additional information in order to help you best.

  1. have you checked if you have reasonable space to create a backup?

  2. you receive an error with the error code (If Yes, specify)?

  3. do you also use some 3 part backup software?

  You can try the following article on the error message when you use Windows Vista: "an unauthorized change was made to your license".

  http://support.Microsoft.com/kb/931699

  You can also try to configure your machine in order to boot and see if the problem is resolved. You can follow the given article:

  http://support.Microsoft.com/kb/331796

  Hope the information will help. Please post back and we do know.

  Thank you & best regards

  Ashish Gupta
  Microsoft Answers Support Engineer

• Windows 8 Group Policy client service, has no sign in

  Hello

  I am running Windows 8 Professional, and over the past two days have experienced random errors, try to connect.
  First of all, when I log on as a standard user, I get the message ' customer service group policy has no sign in "and cannot connect.  If I try to log in as administrator I can connect but Windows recreates the profile from scratch and when I get to the menu start I have no apps posted and it cannot find all the programs through research.  This problem has happened twice now, and it seems to settle temporarily after the reboot, but this morning, it took 4 reboots to fix.
  I also have the error "Windows could not connect to the system event notification service", and once again, it seems setting after restarting a few.
  I scanned my SDD on which the operating system is installed and there is no error reported.
  I am worried that during the next reboot the problem will come back and will not be repaired.  Can you please tell me how to resolve this.
  Kind regards
  Matthew

  OK, guys, I already posted solution in other threads, and it's for Windows 7. But it seems that it's exactly the same problem and a very widespread--caused by accident during the restart initiated by Windows Update.  I'm to re-post here.  If anyone can test it on Windows 8 would be great.  If you need my help let me know - I'm really very interested to test it on Windows 8.

  I had this problem on my laptop since November, and it really annoyed me.  I sifted through the event log and found the model of events leading up to the issue and, probably, he did.

  In short, the model is as follows: Windows updates automatically run as planned, and when restarting is launched after the updates are complete, the computer crashes (probably during the reboot sequence).  When starting, it signals that the last stop was not planned, and the question starts to happen.

  I spent 2 days trying to dig a solution by Internet, without success, until I came across this page.  It says nothing about this particular problem, but it gives more information on the SVCHOST process that launches many services, including Group Policy Client.  It seems that when restarting vital registry settings have been lost during the accident and Group Policy Client 'does not know' how to start.  Let me explain:

  There are two places to look in the registry:

  1. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services this path must contain gpsvc key (a record), which is responsible for the configuration and service settings.  I found the key was intact, so you do not touch anything here - just check that the key exists.
  2. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows svchost It's the most important way you should look at in, because it should contain keys and values under the #1 key.  Here are descriptions of what must be present there.
  • There must be called GPSvcGroupmulti-string value. My laptop was missing it.  Thus, you must create the multi-string value called GPSvcGroup and assign it the value GPSvc.
  • Then, you must create a key (a folder) and name it GPSvcGroup - this key should normally be there, but, again, that it was missin on my laptop.
  • Open the newly created GPSvcGroup folder, then create 2 DWORD values:
  1. First called AuthenticationCapabilities and you must give it a value of 0 x 00003020 (or in decimal form 12320)
  2. Second, called CoInitializeSecurityParam , and it must have the value 1.

  When you have finished all the above steps, restart the computer, and the problem will be solved.

  Here is the link to the video walkthrough if you have trouble understanding of what needs to be done: http://youtu.be/4m5KEmckWK4

• Error at startup 'Windows could not connect to the Group Policy Client service. "

  http://NS8.upanh.com/B5.S35.D4/b4eeb57376a9063490ccb13a5c59e84d_51157438.error.PNG

  It's the ball that appeared recently on my desktop whenever I log in Windows 7 Ultimate x 64. Someone knows how to fix this? Please help me as soon as possible :(

  http://NS8.upanh.com/B5.S35.D4/b4eeb57376a9063490ccb13a5c59e84d_51157438.error.PNG

  It's the ball that appeared recently on my desktop whenever I log in Windows 7 Ultimate x 64. Someone knows how to fix this? Please help me as soon as possible :(

  I FOUND THE SOLUTION TO THIS PROBLEM!

  The crash of your computer during updates Windows caused which!

  I had this problem on my laptop since November, and it really annoyed me.  I sifted through the event log and found the model of events leading up to the issue and, probably, he did.

  In short, the model is as follows: Windows updates automatically run as planned, and when restarting is launched after the updates are complete, the computer crashes (probably during the reboot sequence).  When starting, it signals that the last stop was not planned, and the question starts to happen.

  I spent 2 days trying to dig a solution by Internet, without success, until I came across this page.  It says nothing about this particular problem, but it gives more information on the SVCHOST process that launches many services, including Group Policy Client.  It seems that when restarting vital registry settings have been lost during the accident and Group Policy Client 'do not know' how to start.  Let me explain:

  There are two places to look in the registry:

  1. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services this path must contain gpsvc key (a record), which is responsible for the configuration and service settings.  I found the key was intact, so you do not touch anything here - just check that the key exists.
  2. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows svchost It's the most important way you should look at in, because it should contain keys and values under the #1 key.  Here are descriptions of what must be present there.
  • There must be called GPSvcGroupmulti-string value. My laptop was missing it.  Thus, you must create the multi-string value called GPSvcGroup and assign it the value GPSvc.
  • Then, you must create a key (a folder) and name it GPSvcGroup - this key should normally be there, but, again, that it was missin on my laptop.
  • Open the newly created GPSvcGroup folder, then create 2 DWORD values:
  1. First called AuthenticationCapabilities and you must give it a value of 0 x 00003020 (or in decimal form 12320)
  2. Second, called CoInitializeSecurityParam , and it must have the value 1.

  When you have finished all the above steps, restart the computer, and the problem will be solved.

  Step by step video for those who are not very technical procedure is here: http://youtu.be/4m5KEmckWK4

  I'm so relieved that I could remedy and hope this will help others with the same question.

• printer upgrade system but cleint server group policy printer displays not not in the devices and printers

  updated to the cleint system but printer server group policy printer does not show same printer displayed in the list in the devices and printers, but while printing the document, what is the problem of how solve the problem.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• The Group Policy Client service failed to connect windows 8.1 after update

  Hello

  I got an automatic update from Microsoft on my laptop this morning and now I can't get past the log in. I either get "your PC is offline.". Please sign in with the last password used on this PC or service The Group Policy Client could not connect.

  Thank you very much

  Colin

  Hello ColinMorton,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you experience connection problems after that you run a Microsoft Update. I would recommend you look at the HP support document: Safe Mode of Windows 8 (8.1 is exactly the same) and the safe boot mode. Once you are in Mode safe I would recommend that you look at and follow the steps in the HP Support document: use Microsoft System Restore (Windows 8) (8.1 is exactly the same) and restore your system a few days before the update that caused you this problem. This will not affect your applications only personal folders that you have installed in the past few days and/or the settings that you have probably changed. You can simply reinstall the applications and/or re - change the settings later.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great weekend!

• The Group Policy Client service does not have logon

  "Hi we seem to have almost exactly the same problem (on portable House my wife running Windows Vista Home Premium) and accessible via a wireless connection at home)." The only difference is that she receives the message 'the Group Policy Client service has no logon' every time she enters her password, to attempt to gain access to his laptop. We are sure that his password has not changed by mistake (or one of our children!), as a message "the user name or password is incorrect" appears if the wrong password.  We can't even get to the start ORB / search bar. Any suggestions? I apologize if we are missing something simple, but we are not informed users!  Any suggestions gratefully received.  "Thank you James.

  I'm having this same problem. Can't even get to my desk to create another profile.

  Hi James,
   
  -Are you connected to any network domain?
   
  Try the steps listed in these articles:

  The Windows password problems

  What to do if you forget your Windows password

  Note: Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the below sticky

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

• Group Policy Client service does not have...

  By logging into my account on my Windows 7 admin, computer network, I get the message "the Group Policy Client Service failed to connect. Access denied. "  Is anyway to fix this?

  Hello

  Yes but the updates have to reboot - you must restore back as much as it takes to
  correct the problem.

  ---------------------------------------

  Another method that might help: references to Vista also apply to Windows 7.

  Try these to erase corruption and missing/damaged file system repair or replacement.

  1. run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  2. start - type in the search - box COMMAND find top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  3. then run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then do-, use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK
  then go back and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times. Do the
  same for other accounts that may be difficult. Then if necessary you can also reset your password
  in the accounts. Do not forget to leave your Admin account and the other to the desired level.

  Make another Admin account with your password and use it to fix the others if necessary. (just for
  repair, don't use regular account, not a safety valve) always keep a spare ADMIN account.

  DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Why windows does not connect to the Group Policy client?

  I am currently using a dell inspiron with windows 7 Edition 7720 Home premium and recently a message started to appear above my taskbar saying

  "Unable to connect to a windows service.
  Windows could not connect to the Group Policy Client service. The problem prevents standard users to log on to the system.
  As long as administrator, you can go through the system event log to see why the service failed"
  Anyone know why this is happening and how to fix it?

  The resolution is quite easy. Ignore all these tech geeks here and on other sites that just want to show how they can play with the registers - a very dangerous game.  Go to search, type in cmd, open cmd as administrator.  Type exactly this (with the indicated spaces): netsh winsock repair, and then press ENTER. You need to restart (NOT close and turn on) your computer. Bingo! Unfortunately, this condition can re - occur from time to time, as if you start your computer before you turn on your internet connection and establish a good connection.  Don't worry the fix takes about 3 to 5 minutes depending on your speed of restart computer.

• Group Policy Client service does not have login HELP

  As soon as my computer starts up I get the message, the Group Policy client service, the connection has failed. Searched here, but responses confuse me! Can you explain in simple terms how to get rid of this problem? Thanks in advance, Rich

  Hi Rich

  My apologies if I misunderstood your question.  When you open a session with an Admin account, able to see the TPM service are you running?  Looks like your girls profile is damaged.  You may need to create another account.

  Here is a link to 'fix' a profile corrupted.
  http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Please let us know if this helps you to solve this problem - if it isn't we will continue to solve problems - thanks Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows could not connect to the Group Policy client service

  I get the error message after restarting my laptop with Vista Home:

  Windows could not connect to the Group Policy client service. This problem prevents limited users to logon to the system and administrative user, you can view the log of events system for details why the service did not respond.

  I'm the only user on my laptop with laptop admin rights works correct with few programs but it seems that I have no ADMIN rights now. I have not authorized for the restoration of the system, start-up ccleaner.exe, instalation of new software, etc.

  I tried this:

  1.
  

  http://social.answers.Microsoft.com/forums/en/vistasecurity/thread/bbfe3246-0ceb-4899-BFBA-7a98e642c009

  with hidden Admin, but for Admin hidden even in safe mode was not allowed to change my account more up/down.

  My laptop have orginal Vista and I have no bootable CD.
  

  2.

  http://social.technet.Microsoft.com/forums/en/winserverGP/thread/5de9f483-ff69-4fac-ac3f-601a62cc78d1

  result:

  netsh

  Netch > winsock reset

  Elevation of the requiries the requested operation.

  Help, please.
  

  Hi SSergo,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in theTechnet Group Policy Forum

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.