See Group Policy Persona does not

Similar Questions

• How can I correct a problem accessing my firewall settings because the Group Policy client does not connect to windows?

  I have tried everything recently adjust the settings of the firewall from my window and a box appears saying that after an unidentified error, I can't access my firewall. After some research, I discovered that it was because my client group policy server does not connect and a small box appears saying that whenever I connect to my laptop. It is not effect my use of the internet at all, so I've never bothered to see what that meant until now I need to access my firewall. I tried to adjust the settings in group policy, but everything is gray and I can't change anything. I use an admin account so I don't know why I can't set the parameters. I'm completely stuck and I don't know that much about computers. Is there anything else I can try? I also tried a system restore, but it lasts for a long time and I can return only 5 days. Thank you

  Hi Sheldon,

  Are you connected or connected to a work network or domain? If so, this could be a policy governed by your network administrator, and you will not be able to change it.
  You might try to tell scientists on TechNet on your question to see if they have a better answer for you:
  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads

• Having hard time you sign in to one account on my computer. "The group policy service does not have log on." Access denied. "

  Trying to connect to one of the accounts on my computer and the message telling me "the group policy service does not have the journal on.»  Access denied. "  Can someone help me with this?

  Hello

  1. is the computer connected to a network domain?

  2 are you facing this problem into account administrator? Do you have other administrator accounts enabled in the computer?

  3 did you changes to the computer before the show?

   
   
  Method 1:
  
  Check if you are able to start the computer in safe mode.
   
  Step 1: Safe Mode
  
  Start your computer in safe mode and check the number.

  To start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   
  If you are unable to boot into safe mode, please let us know.

  Step 2:
  

  You run the system restore in Windows recovery environment?

  If this isn't the case, I would say you can do a system restore to the Windows recovery environment. Follow the steps in the section provided.

  http://support.Microsoft.com/kb/940765/en-us

  
   
  I hope this helps!

• VISTA SP2 GROUP POLICY CLIENT DOES NOT.

  While LOG IN ADMINISTRATIVE ACCOUNT TYPE gpedit.msc then it does not

  any solution

  Microsoft support offers a FREE support for Vista SP2 issues at: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1.  Take advantage of it while it lasts stilll.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• printer upgrade system but cleint server group policy printer displays not not in the devices and printers

  updated to the cleint system but printer server group policy printer does not show same printer displayed in the list in the devices and printers, but while printing the document, what is the problem of how solve the problem.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Hello, I'am getting a little crazy because Group/scrolling text does not. I looked at several videos of Adobe evangelists now to make a scrolling text or group.  I ' am in collaboration with InDesign CC and it looks like my 'Overlay tools' do not work.  W

  Hello, I'am getting a little crazy because Group/scrolling text does not. I looked at several videos of Adobe evangelists now to make a scrolling text or group.  I ' am in collaboration with InDesign CC and it looks like my 'Overlay tools' do not work.  When I see the preview, I can't scroll but only to select text. My steps are simple: I put my text in a selected area. PLACE IN > that select > Folio overlays > floating framework. It does not scroll. What I've done wrong?

  

  DAT danced some overlays avenues (!) reviews Regolamento zijn voor DPS books, due noch het SWF-noch het ePUB-voorvertoningsvenster laten zien said. Het due zal ook niet werken in bv. en PDF een in een ePUB avenues in FXL - epub puts extra een saw CSS code. DHS avenues from DPS DPS 2015 (article) maar voorvertonen zal het niet anyway (folio).

  Werk I niet met DPS (peper, peperduur!) vergeet dan het hele Overlay window DHS.

• Windows Diagnostics policy service does not

  Windows Diagnostics policy service does not

  Original title: Network wireless adapter NIC Ethernet network device

  Hello

  • What were the changes made before the problem occurred?
  • When you receive this error message?

  I suggest you try the given steps and check if it helps

  Method 1: Try the steps from the link below

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows?T1=Tab03

  Method 2: Try to restore the Transmission Control Protocol / Internet Protocol (TCP/IP).

  The reset command is available in the IP of the utility of Word context. Follow these steps to use the reset command to reset TCP/IP manually:

  1. to open a command prompt, click Start, click Run. Copy and paste (or type) that follows the command in the Open box, and then press ENTER: cmd

  2. at the command prompt, copy and paste (or type) the following command and then press ENTER:
  netsh int ip reset c:\resetlog.txt

  Note: If you do not specify a path of the directory for the log file, use the following command:

  netsh int ip reset resetlog.txt

  3. restart the computer.

  Change TCP/IP settings

  http://Windows.Microsoft.com/en-us/Windows7/change-TCP-IP-settings

  Method 3: If this does not work, uninstall and reinstall the network adapter

  To uninstall the drivers follow the steps below

  1. click on start, type device manager in the start search box and press ENTER. Click on continue. The Device Manager dialog box appears. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. in the list of device types, expand network adapters, and then look for the specific device.
  3. right click on the device and then click Properties.
  4. click on the driver tab.
  5. click on uninstall.
  6. click on OK.

  Restart the computer, the default drivers would be installed.

• When I connect wifi or lan but it is not connect and began to turboshoot still appers a message "diagnostics policy service does not work.

  Separated from this thread.

  I ve acer aspire e1 - 531, now I am having problem about the internet, when I connect wifi or lan but it is not connect and began to turboshoot still appers a message "diagnostics policy service does not" can u tell me how to fix it... Please stp by step... Thank you

  Hello

  Thanks for posting your request.

  I would ask you to follow the steps below and check.

  While you are on the start screen, type cmd. Right click on cmd.exe returned and select 'run as administrator'.

  Once the command prompt window opens, type the following commands and press ENTER after each:

  net localgroup administrators / add networkservice

  net localgroup administrators / add localservice

  Type exit to close the command prompt window, or simply X starting at the top right.

  Restart computer and check if you still receive the message.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• The Group Policy settings do not allow the use of a PIN code at startup Bitlocker Windows 8

  Hello

  I hope you can help.

  I tried to implement the encryption on my new laptop Lenovo Twist with windows 8, but get the following error.

  ERROR: An error has occurred (code 0 x 80310060):
  Group Policy settings do not allow the use of a PIN code start. Please choose a
  other BitLocker startup option.

  I tried to change local policy settings...

  1. Go to Local computer policy > Computer Configuration > administrative templates > Windows components > Bitlocker Drive Encryption > Operating System Drives
  2. Open the key require additional start authentication
  3. Activate this key, then assign the require startup PIN with TPM TPM configure startup PIN

  .. .but always not the same error.

  Help, please. He drives me crazy!

  Hello

  Thanks for choosing Microsoft Community to post your question!

  According to your description, it seems that you have problems with activation PIN code on startup.

  Refer to the suggestions from this link and check.

  http://social.technet.Microsoft.com/forums/en/w7itprosecurity/thread/c3b5e90d-89fd-4e95-AF97-723b045eb41b

  For more help, I suggest you ask your question in the TechNet Forum. http://social.technet.Microsoft.com/forums/en-us/w8itprosecurity/threads

• I bought Adobe Lightroom 6 only to see my DVD drive does not work with Windows 10.  Is it possible to download Lightroom?  I have the DVD with the serial number.

  I bought Adobe Lightroom 6 only to see my DVD drive does not work with Windows 10.  Is it possible to download Lightroom?  I have the DVD with the serial number.

  Download and install the trial version of Lightdroom CC.

  Then enter your serial number, follow these steps

  How to convert a trial CC 6 Lightroom Lightroom

• Group video call does not

  Hello! I recently bought a laptop with Windows 8.1 with Skype application pre-installed. When when I video call to one person, everything works normally, and I am able to see the other person. However, when you make a group call, I'm the only one who cannot see any of the parties, even if I am able to hear. I have the latest Skype application. Also, I can't receive pictures. Where is the problem?

  The problem is that the 'modern' for Windows 8/8.1 native Skype application does not support the group video calls. If you want this feature to be available, then you can install the desktop version.

  The currently most recent Skype 6.14.0.104 desktop version can be installed using the msi installer:

  http://download.Skype.com/MSI/SkypeSetup_6.14.0.104.msi

• The Digital Persona does not detect the fingerprint reader in Windows 7

  I have upgraded from Vista to Windows 7 Pro (full installation). Now, DigitalPersona does not detect the fingerprint reader. I tried to uninstall and reinstall the driver and the program, does not. Any ideas?

  Hi Cankermechanic,

  I suggest that you try to update the drivers supplied by Device Manager and check.

  See the link for update drivers: update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  If the problem persists, I would recommend that you uninstall drivers and reinstall the drivers from the site Web of Digital Persona, if that is helpful.

  If the problem persists, I suggest that visit you the manufacturer for further assistance from the link below:
  http://www.askpersona.com/

  I also recommend that you contact the manufacturer of the computer for further assistance on this issue.

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Group Policy client could not start

  Hello

  I have a problem of Group Policy Client on a stand-alone computer with Windows 7 SP1. When the computer starts, the main account can be accessed as usual, but once the office is reached, a notification bubble appears indicating that Group Policy Client didn't start and that standard user accounts cannot be loaded. Administrator accounts have worked normally until recently, where administrator privileges have begun to not be available in Mozilla Firefox.

  Do you know how to fix this?

  Hi Kiran,

  Thanks for the reply.

  Make sure that the Group Policy client service is running.

  See the following steps:

  a. click Start, type runand press enter

  b. type services.msc , and then click OK.

  c. search customer service strategie strategy group, right-click on it and click Properties.

  d. Make sure that Service status is started and the startup type is automatic

  e. click on apply and OK.

  Thank you.

• Groups of tabs does not

  Tab groups stop working today, by clicking on the tab button groups or 'Ctrl + Shift + E' do nothing. Using FF 9.0.1

  I used groups of tabs before with great success. Recently, I can type in the ' group name, but the name does not appear on the tab group again more as soon as I reduce the group.» I don't have the add-on removal... I checked. Any ideas? Thank you

• See the full gallery does not work

  While I can see the full gallery on http://www.cnet.com/products/dji-phantom-3-advanced/, in the Chrome browser, only the first image appears in the 9.0.2 Version of Safari 11601.3.9 (El Capitan, 10.11.2 (15 C 50).)

  Who else has this problem?  Why the problem and what is the solution?

  Safari - no support for third-party modules can cause Safari to suddenly quit, or have performance problems

  Safari does not load a page or webpage elements are missing

  Safari / other browsers - Web site does not