GTX GPU 660 problems
I recently bought a Nvidia GTX 660 from ASUS to replace the Nvidia GT 620 in my HP Envy h8-1430 pc. After I installedd GPU and I shot, even if it was put on, it started beeping for some reason, I don't know why, but I double checked and made sure that everything has been properly installed, but it still beeps at startup, so I had to put in my old GPU to make it work.
Arexin, welcome to the forum.
Here's a guide to help you solve your problem. Read it carefully and follow the instructions step by step.
Please click on "BRAVO", if I helped you and click on "Accept as Solution" If your problem is resolved.
Tags: HP Desktops
Similar Questions
-
My Dell XPS 630i cannot manage a 960 GTX GPU?
Hi, I've been a fan for a long time in this forum, it has helped me MANY times! -I hope that it can help with this problem. I have a Dell XPS 630i, and I would like to upgrade the graphics card for a GTX 960. -Can the system handle it? Is it compatible?
My system:
Dell 630i XPX
Win 7 Pro
4 GB OF RAM
Stock power supply 750W
SATA 500 GB hd
two 8800 GT SLI vid cards
1.0.12 BIOS that is installed on the PC.If you have any other questions, feel free to ask. Thanks in advance.
P.S. I know that there is a new version of BIOS on the Dell Web site for this (1.0.13), system but before the upgrade, I would like to know if this installation is possible even first (never updated the BIOS before and no sense to do if not compatible). Thank you.
I just did this, Dell xps 630i 2.4 ghz x 4 8 GB ram. installed the evga gtx 960 only problem is this card takes a pcie 8 pins. the seller has provided adapper taking two 6-pin pCI to a 8 pins. works very well...
-
Premiere Pro CC 2015 Mercury Gpu playback problems
Hello!
I'm under Premiere Pro CC 2015 Version 9.2.0 (41) Build on OS X El Capitan (10.11).
I'm editing on a Macbook Pro 15 "2012 2.3 ghz w / a gpu 650 m."
When I have the playback engine Mercury in my program screen GPU mode is glitches and impossible to display the video correctly. This only happens when the timeline is paused / not scouring. The timeline is under what the video display correctly without problem.
During playback of mercury is in software mode is no problem with the program window.
I took the project and opened it on my Workstation Windows 10 with a Nvidia Gtx 970 w/o any problems.
If you know what is the cause (e.g., bad drivers, configuration, etc) please let me know! Thank you.
(Activated Gpu playback)
(Active playback software)
I think - I we a PC - is updated to the latest version of El Capitan.
-
Aurora R4 and double Asus GTX 670: heating problem
Nice day
This week, I added a second GTX 670 to my system.
All work fine in the majority of the game. In heavy load, GPU1 temp can be up to 75 - 80 c and GPU2 until 89 - 91 c. That's high, but still under the recommended 97 HP max temp And I never experience any decline in performance.
(idle, both card stay under 40 c)
That said, in some games, like Batman: Arkham City, don't know why, but the GPU2 temp reached 96 C. It is far too high.
The fact that the 2 cards are very close together and even affect themselves, is a problem. Also, the map background is so close to the merits of the case (or the power supply I think).
Thus, in this area, a lot of heat.
You guys have ideas on how I could work it to control the heat? Physically, I can't move cards.
I already changed the profile of fan with the Tweak of Asus utility. That helped a lot. More noise, but it doesn't matter.
I'm sure that remove the protective heat and side panel (the door that closes on the GPU) should help, but I don't want that :(
Should I install a cooling of the water? (I'm not familiar with this, and I believe that it can be quite expensive).
Any thought on this?
I'll post some pictures of the installation tonight (its actually 8h50am here, I'm at work)
It is a problem on this little mATX cases. This is why I suggest that people go to a single card solution. These after-market maps are meant to draw in the air on their front edge and evacuate on their rear edge?
Be sure to bring in enough fresh air to the front case fan PCIe (I use the curve).
Yes, try to remove the hinged lid.
Last resort... Add an another exhaust fan to pull hot air away from cards. If you can get that hot air inside top, it should mix or stand on.
-
Hello, the other day, I bought a GTX 750 TI to replace my 530 GT and when I started my computer, there were beeps sounds and it wouldn't start. I guess there is a problem with my card mother and bios, but I need to clarify if my diet could be a problem, too
My computer model is the H8-1120 and I want to know if the motherboard is compatible with the GTX 750 TI because there has been no update since 2012.
Thanks for the help!
Hello
I don't think you have a power supply problem because there have been a number on messages about specific models of the NVIDIA 750 does not not in different HP motherboards. Try one of the below graphics cards that they might have the best compatibility with your PC.
MSI NVIDIA GTX N750 TI and the MSI GTX N750 TF these graphics cards have a switch to operate in legacy and UEFI mode. See the image below.
-
HELLO, I JUST BOUGHT A NEW GPU (GTX GEFORCE 1 GB 128-BIT GDDR5, 750) FOR MY HP PRO 3400 REPLACE A DEFECTIVE PNY GEFORCE GT 630, 2 GB, DDR3, BUT ABOUT THE PLUGIN IN THE GTX 750 MY PC REFUSES TO START IT JUST GOES TO A SCREEN WITH THE CURSOR FLASHING
I UPDATED MY BIOS AND NOW I'M STUCK WITH NOTHING MORE TO PLEASE HELP ME MY BUDGET IS VERY TIGHT.
MY PC SPEC IS AS FOLLOWS:
HP PRO 3400 MICRO TOWER
WINDOWS 7 PROFESSIONAL 64-BIT
INTEL PENTIUM CPU [email protected]
IS IT NOT THERE HAS OTHER INFORMATION NECESSARY TO HELP YOU TO ME SAY WHAT IS NEEDED CONTACT ME PLEAS.
Thank you!!!
Him
The NVIDIA GTX 750 will not work on your PC. Your PC needs a BIOS version 8 and is not available for your PC.
Graphics of OEM HP to the address following cards will work on your PC.
-
GPU upgrade problem with M3985
I try to put a GTX in the Aspire M3985 770 - I have improved the power supply to a 650w with no problems (computer works without the card, as well as the power supply), but when the card is put that I meet problems.
If I put the card in the system and plug my monitor, the computer gets to BIOS Acer screen... and that's all. After that, I get about 4 beeps every 20 seconds and the screen then goes black with a flashing underscore more than beeps. If I try to access the BIOS screen goes all black.
If I have the card in the system and try to plug my monitor on the INTEGRATED GRAPH card... I get an error from the BIOS code. 1 long beep and 2 short. I know, it's a video card error. This also applies when nothing is plugged into the card or edge.
When the card is removed, the problems to stop him.
What I am led to believe that it is either:
1. the motherboard is not compatible with the card (this really should not be a problem with a computer that is a year old... If it is, it's absolutely ridiculous.)2. the BIOS of the motherboard has problems with the map... a simple update the BIOS should fix this... but as I can see updates of motherboard for this computer have been neglected since BEFORE the release of this card, which explains a lot.
3. the video card BIOS is the problem. I find it hard to believe though. The map has been updated in another computer. The card works fine, and the BIOS is in final review.
Help to fix this would be appreciated so I can decide what I'll do with this card.
Thank you.
Just thought that I would let you know I solved the problem by changing the motherboard.
-
Slowed down during the rendering process - 770 GTX GPU
I am a file - this is a PSD with animated layers (position, opacity) with video overlays - totaling a little more than 2 minutes. Before I got the velociraptor hard drive 10krpm, it took 11 hours for export. Thinking that it was the hard drive (which was probably a big bottleneck even when problem) I had a new one just for this.
After obtaining my project on the velociraptor and set up as a working drive, I started to make the same file again.
It's happened for 4 hours, with the GPU sitting idle (0%), but its use is to 1867 according to my GPUTweak software memory.
Reading of mercury for the project is set to GPU. Whole reason I got a higher end video card is for the first use the GPU to accelerate the process, and it doesn't seem to be the case.
by "rendering", I mean I have red bars in the upper part of the chronology, break-in numpad in a hurry.
* Edit * after a strike at this point, my rendered file and I waiting over SOUL and results are the same - memory GPU used but no GPU
Any ideas/suggestions? Is this normal?
My system:
I7 - 2600K @3. 40 GHz
ASUS P8Z77 - V LX motherboard
24 GB RAM
ASUS GTX770 - DC2 OC 2 GB (with latest drivers)
Seagate 2 TB hdd (OS and applications)
Velociraptor 500 GB hdd (scratch, media release)
Windows7 x 64
all programs adobe updated to 2014 CC
The maximum dimensions made me think on the number of tracks - there was no mention of tracks max in the article dimensions Max Mine had many trails, who sat to an opacity of 0% of layers. So I had indicated to do a cleanup, to see if I can squeeze little speed this way.
My primary sequence was of 36 titles, nested in another sequence with more than 4 tracks, and one of these titles has been nested has 6 tracks more... I deleted all the stuff opacity 0 to condensed my time line, by removing the used. I got the 36 tracks up to 20, and...
BAM! 3 minutes to make! on the machine that took more than 8 hours. The problem was I was too sloppy with all pose and must have exceeded a limit of the track.
-
I had active SLi and tried to turn it off, then the laptop froze and started to beep, when I pulled out and when I turn it on again the gpu is not found, in other words, windows can't find my gpu it say it is not integrated.
Although reseting the ultrabay helped, thanks!
-
EVGA GTX GPU Pavilion 500-277cb 960 leave Sam's Club
I'm interested if a graphics card in EVGA GTX960 (model 02 G-P4-2962-GOLD) can be added to a HP Pavilion 500 - 277cb of the Sam's club. I am aware that I needed to upgrade the power of 600w. My research indicated that the card had to be secure boot hp compatible. EVGA has confirmed that this card is compatible, but impossible to validate that it was compatible to the bios and card mother Memphis-S. It's the smallest graphics card so it must adapt to the Board and the inside of the case. This card will work? And what happens if changes would be to do?
You've done the research and should have no problem. What PSU are you interested in?
-
Card graphic Inspiron 660 problems
I can't use my nvidia graphics card, even I can't open the NVIDIA settings window.
He tells me "display NVIDIA settings are not available."
you are not currently using a screen attached to a NVIDIA GPU
How can I solve it
On the driver tab nVidia GT 620 under display adapters in the Device Manager, which is the version of the driver? This is reflected at the title of the help in the nVidia Control Panel.
Oops, another thought. How you connect the monitor to the computer, VGA, HDMI or DVI? You should use the connector on the video card, NOT the upper connector that must be covered with a plastic cap.
-
HP Envy H8 - 1540t - graphics cards double, Pcie 3.0 support
I have 2 questions about the use of dual graphics cards and Pcie 3.0 support in my machine.
The machine is:
HP Envy H8 - 1540t
Win 8 64
I7-3820 2nd generation
10 GB OF DDR3 1600 MEMORY
256 GB SSD
1 TB SATA hard drive 7200 RPM
Blu - Ray player
TV tuner
Prem N - Wireless Lan and Bluetooth 2 x 2
600 Watt PSU
NVidia GTX 660
This machine uses the card mother Pegatron IPIWB-PB and has 2 Pcie x 16 slots. I realize that using the width double GPUS like GTX 660, the small Pcie connectors next to them will be buried, rendering it useless. They are so my 2 questions;
1.) Will 2 Nvidia GTX GPU 660 is in good physical shape within the machine and be supported?
2.) this motherboard with a Intel X 79 chipset does support Pcie 3.0?
Thank you
Hello
You can find information on the following OFFICIAL link, it seems that it only supports PCIe Gen 2.0
http://support.HP.com/us-en/document/c03132964#n241
The image of the motherboard (see above) and the following picture of the 660 GTX, simple answer: 2 cards will not be in good physical shape.
http://www.GeForce.com/hardware/desktop-GPUs/GeForce-GTX-660/product-images
Kind regards.
-
Change the GTX 660 stock cooler &; fan on a H8-1151eo desktop PC
Hello
Just bought a PC desktop H8-1511eo a few days ago. Early on, the fan on the 660 GTX running notiably high speed and very noisy. Not noisy as broken, but as the * bleep * thing was trying to extinguish a fire
Should the fan on the GTX speed automatically set according to the time GPU (29 C @ idle), or what? However, it seems that it is RPM max all the time (1700rmp - utility Speedfan). Downloaded the latest NVIDIA drivers (314). It did not help. It seems that the support of doenst motherboard the possibility to adjust the fan speed, or cela it locked from Bios or something?
Any Bios Update on the h8-1151eo to control the fan speed?
And anyway, I found a rather small (119 x 94 x 51 fan / w mm) VGA cooler (A r c t I c C o o l e r) 660 GTX. Only problem is that the maximum for the cooler 120W power dissipation and energy max is around 130W GTX 660. Do you think it will be a problem? I would buy the model more large (up to 200W), but I don't know if it can be inserted inside the Tower (136 x 138 x fan / w 51 mm). Is there a list of VGA coolers that fit in the case of ATX Mid of the h8-1511eo, or can you recommend one?
-Thank you
Hello
It is the VBios on the video card in GTX660 that control the speed of the fan according to temperature changes, rather than the motherboard BIOS the Office.
Is your PC of office still under warranty? For the HP product warranty status check the web page.
Your GTX video card maybe having problems. I suggest that you contact HP Total care and explain the problem.
If your office is no longer under warranty, I recommend to replace the video card. Remove the cooler on a video card is not as simple as it is to do the same thing with a motherboard CPU cooler. The video cooler on the video card GTX660 may have replaced thermal interface or the VBios updated material.
Erico-
-
Z600: Stock HP Z600 GPU Upgrade possible version GTX?
Hi, thank you for taking the time to look at my question.
I have a hp z600 (stock) my computer that I want to date with a new GPU (graphics card)
I want to place a GTX - gpu 9XX Nvidea card in my computer (mainly for games)
I can't find mutch information about an upgrade like this for the z600.
just be wary of space and energy consumption.
So my question for you beautiful people does anyone have experience by replacing the stock GPU for a
Nvidea GTX (XXX) gpu? If you experience any upgrade of any card GTX information would of course help out me.
Thank you
Greetings Michael
D3Nv3R, welcome to the forum.
Here is an Overview of the computer. It shows the video cards supported by the motherboard. It says nothing about the nVidia GTX cards. They require the UEFI in the motherboard instead of a standard BIOS. I doubt that your motherboard has UEFI due to age.
Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.
-
Qosmio X 500 - GTX 460 M lag Butterfly
Need some advice about my laptop.
I have problems with my Qosmio X 500 34 which I think is associated GPU.
Problems with it from the word go with fan dead CPU which had to be replaced and the blue screen of death. Occupied reformat using own windows 7 Ultimate and drivers after. No problems after.
Have not tried games until recently. But get lag or limitation emits every 3-4 seconds only in the game, not on video, but even at the lowest resolution.
I tried sniper elite, Starcraft 2, and now Diablo 3 with all the same problem.
I've updated last GPU drivers and BIOS, but no change. Updated all drivers windows 7 and NVIDIA Web site, but once again no change.
You run GPU - Z and only things, is that it works on PCIE 1.1 instead of max 2 which increases on rendering test.
I am not very informed when it comes to GPU and particularly in books, any advice on what I should do would be appreciated.
Toshiba Qosmio X 500 34
I7-2630 2.00 GHz 8G RAM
GTX 460M> Problems with it from the word go with death fan CPU which had to be replaced and the blue screen of death
How to understand this? Service Toshiba replaced all this?
> Occupied reformat using own windows 7 Ultimate and drivers after
Why not with the original Toshiba recovery image that you got with your Qosmio laptop?
> I've updated last GPU drivers and BIOS, but no change. Updated all drivers windows 7 and NVIDIA Web site, but once again no change.
Latest driver GPU of the Toshiba download page?Sorry for all these questions, but I just want to understand what is happening there.
Maybe you are looking for
-
Some keys stop working after the update of the Sierra (only for a specific profile)
After update to Sierra my keyboard worked well for a while. But at random, U I O P J K L keys stopped working. The bug only shows 1 profile. If I create another profile new profile keyboard works very well. Anyone know what that sometimes caused tha
-
Data of C++ plug-ins for DIAdem
Hello I need to develop a data C++ plug-ins for DIADem, I read it is possible, but I can't find any information on this subject. I downloaded the labview_dataplugin_sdk_2011.exe because I use DIAdem 2011. Does anyone now how to do this in C++ and whe
-
How to disable a touchpad?
Hi, my touchpad is to be really annoying and I do not know how to disable, I tried to touch the upper-left side of it and it doesn't work! What can I do to turn it off?
-
Failure of the factory restore?
I tried to do a factory restore on my HP Pavilion m8247c with windows vista, so I could start over and put a new operating system on it. After that the restoration was finished he started and I got an error message saying: Configuration system error.
-
How can I get only a few things that start on my computer instead of all sorts of things at once
How can I get only a few things that start on my computer instead of all sorts of things at once