Guarantee started before I bought my computer.

Similar Questions

• I have a windows computer and a computer mac laptop.  I bought the cd of windows photoshop cs6 in December 2013 before I had a computer mac laptop.  I can get it on both computers? If this is not the case, how can I put on my laptop instead?

  I have a windows computer and a computer mac laptop.  I bought the cd of windows photoshop cs6 in December 2013 before I had a computer mac laptop.  I can get it on both computers? If this is not the case, how can I put on my laptop instead?

  The mac license and the license of windows are 2 different products, mac and windows are 2 different platforms, so you cannot transfer the license between the 2.

• I bought a few years ago a Creative Suite Design Premium and when I want to record my serial number, your services say that the number is not valid. I am surprised because I have used it before on a PC computer that no longer works. I change my computer

  I bought a few years ago a Creative Suite Design Premium and when I want to record my serial number, your services say that the number is not valid. I am surprised because I have used it before on a PC computer that no longer works. I change my computer with a Mac.  You can check the number you customer service gave me, L. Fernandes: < num series kglad deleted >. I give you my phone number in Paris: < phone number deleted - kglad >. Best account. Chantal

  http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-valid-product.html

  p.s. This is a public forum.  the display of your phone number is a bad idea and display your serial number will get it banned (or used by someone else and will not you).

• problem starting before windows starts

  Hello world

  Recently I bought HP Z220 Convertible Minitowers Workstation which is more than good. Windows starts in 20 seconds. What worries me is that when I bought the computer, the startup procedure was really fast. After a some time during the early (before windows starts) appeared onscreen HP saying "Press any key to Option ROM Messages and ESC to enter the configuration menu". It's really annoying because it is there for 1 minute and then the operating system starts.

  I tried to change in the first menu via the shortcut CTRL + S, but without success. When I clicked on disable, it's just gone, and now I can not ge it most.

  Then I entered in the BIOS and in advanced option, I have managed to disable ROM prompt messages. This one missing at the start, but the second saying "Press ESC to enter the menu setup" is still there. I'm worried that if I disable it, I won't be able to return to the menu setup.

  Is there a possibility to reset these startup options? Restore the default values in the BIOS did not help.

  Thank you

  Joe

  Hello Snakey100,

  Welcome to the forums.

  Your system is one of our business models.

  Your question will be better answered it on our business forums.

  Here is a link to the forums.

• I bought my computer from someone else. Change user accounts did not name of each file in the computer. How can I change or remove the user/name (my name) /document? __

  I bought my computer from someone else. Change user accounts did not take their name off of each (or more) file in the computer. How can I change or remove the user/name/document
  I have looked everywhere and changed user information and the name of the administrator. What can I do else?

  Hello flashgordonjxn,

  Who has ever done the installation of Windows, the installation program asks you to enter your name and optionally, the name of the organization. These registration information appears under recommended for in the general tab of the System when you click Start, click Control Panel, click performance and Maintenanceand then click System.

  To change see instructions below:

  1. Click Startand then click run.
  2. In the Open box, type regedit, and then click OK.
  3. Look for the following registry key:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion
  4. To change the name of the company, follow these steps:

     In the right pane, double-click RegisteredOrganization. Under value data, type the name that you want, and then click OK.

  5. To change the name of the registered owner, follow these steps:

     In the right pane, double-click RegisteredOwner. Under value data, type the name that you want, and then click OK.

  6. Click Exit on the file menu to exit the registry editor.

  Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• faild application to initialize: 0x800106ba. A problem caused this program service stop. to start the service, restart your computer

  Original thread: runn dll
  I get on this on my vista desktop
  Error loading \3\lxcgtime.dll
  the specified module could not trading

  and this on my computer vista laptop
  Windows Defender
  faild application to initialize: 0x800106ba. A problem caused this program service stop. to start the service, restart your computer. \

  and I would like to know how to play mkv video media Center (win 7 not vista)

  Hello

   
   
  Did you do changes on the computer before the show?
  
  Method 1:
  You can perform these steps manually to start the Windows defender and check:
  a. Click Start.
  b. in "Start Search", type services.msc and then right-clicking the name of "services" in the list of programs.
  c. Select "Run as Administrator".
  d. look for windows defender and right click and select start.
  
  Method 2:
  You can also view provided articles knowledge base and check:
  Error message when you run Windows Defender: «Error 0x800106ba»
  http://support.Microsoft.com/kb/931849
  Error message when you run a beta version of Windows Defender: "failed to initialize: 0x800106ba»
  http://support.Microsoft.com/kb/930522
   

• JUST BOUGHT A COMPUTER TO PAWN SHOP CAN NOT ENTER IN MICROSOFT VISTA

  I BOUGHT A COMPUTER FROM A PAWN SHOP THAT RUNS WINDOWS VISTA, AND I CAN ONLY LOGIN AS GUEST.  I DON'T WANT TO LOOSE WINDOWS VISTA BUT I DON'T WANT TO BECOME AN ADMIN ON THE SYSTEM.  ANY HELP PLEASE?

  Reinstall Vista:

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• When I bought my computer idid not receive a vista instead disc they gave me three recovery disc, I want to make my own vista disc to repair or reinstall my own vista program

  When I bought my computer with vista as my windows operating program.                  I want to get a vista disk to repair or reinstall vista instead of the disk three gave me or just sent me my own vista disc

  Microsoft sends NO Vista DVD.

  You already have the manufacturer's recovery disks.
  Recovery disc reinstall Vista and your computer about how you bought.

  You will need to contact your computer manufacturer to see if you have a recovery Partition on your hard drive.

  This isn't their recovery process, Microsoft.

  Recovery discs are made from the recovery Partition, OR provided by the manufacturer, as in your case!

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Here is some general info recovery options.

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Download the ISO on the link provided and make a record of startup if repair you need to do a startup repair.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon. Mick Murphy - Microsoft partner

• start-up tone of my computer is late

  start-up tone of my computer is late

  They have done a blog about it.  The old start-up tone did in series and caused delays at the start (he had to complete the loading of the audio stack, initialize and read the sound before it would show the login screen.

  It is now changed to run in parallel as a lazy loading. He will play whenever the system getting higher priority tasks, and which can be later.

  blogs.msdn.com/b/E7/archive/2009/02/18/Engineering-the-Windows-7-Boot-Animation.aspx

  This is the post, on the reading made to Midway "may wonder what happened to the start-up tone."

• We bought a computer last year.

  We bought a computer last year, two months before the announcement of windows 8. We have windows 7 professional 64 bit. I learned from a friend who has an Apple, they got a free upgrade. Can we get a free upgrade? Apple did for their client.

  Some computer vendors offered a free upgrade for Windows 8 but that's between you and the provider and you should have been informed at the time of purchase. Upgrades to Windows 8 are available for a reasonable price.

  To know if your PC runs Windows 8 check this link: -.

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

• Why can't I just move on with windows7 starter to windows 8, my computer is only 9 months since purchest?

  Why can't I just move on with windows7 starter to windows 8, my computer is only 9 months since purchest?

  So it will not uninstall then install my programs, or what, then another question is the offer for $14.99, that's what I was watching and I filled a free upgrade and probably has not been fully tested for this upgrade, he said I would be able to get the upgrade, but there is no decrease in my emails guess still in work. While {s it improves just $ 40 million that I should wait for a version pro or ultimate?

  And what will happen to my saved files?

  and I'll be able to restore to the factory with warranty setting and I can use my series to my computer for the upgrade?

  NOW please if you don't know it please tell me I would like to know some facts and since there is so much development, in my view, the pro version is yet to come, so...

  Windows 7 Starter is not eligible for the offer of $14.99.  Only Windows 7 Home Basic, Home Premium, Professional and Ultimate. If you must upgrade to Windows 8, then you have to wait on the upgrade $ 39.99 for Windows 8 Pro that will become available October 26, 2012.

  The upgrade will allow you to keep your applications, personal files and settings.

  Yes, it should be able to restore the factory State, but always backup before making changes on your computer like installing an operating system:

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

• I have sporadic outages during anywhere from 1 to 5 minutes.  Everything started after I bought a new modem. TWC said, of course, that the modem is fine.  Any ideas?

  I have sporadic outages during anywhere from 1 to 5 minutes.  Everything started after I bought a new modem. TWC said, of course, that the modem is fine.  Any ideas?

  TWC does not yet support some routers, I hope they will be soon.

• I have a complaint on my Mac Book Pro. I bought my computer in January 2016 and it has two problems: the first is the display of the retina that has many traces of the keyboard and as many times it freezes. I have looked for help on the local Apple Store

  I have a complaint on my Mac Book Pro. I bought my computer in January 2016 and it has two problems: the first is the display of the retina that has many traces of the keyboard and as many times it freezes. I have looked for help on the local Apple Store and support too, but it did not help. I would like you help me solve this problem.

  Thank you.

  Kelly

  Your machine is still under warranty, so you should take it to your local Apple store for repairs. Function late in January, you bought it, you still have phone without support. If you can't find any help on the Apple Store, then I don't know what you expect to find here. We have no way to check for problems you have described or any additional hardware, etc.

• Before I formatted my computer, I got a box that says translation but now, after formatting has disappeared. How to get back there? m.v.h torus

  Before I formatted my computer, I got a box that says
  translation, but now after formatting has disappeared. How to get back
  It?

  m.v.h.
  Torus

  This has happened

  Each time Firefox opened

  It is certainly not a feature of Firefox. You have a backup of your data before you reformatted?

• This summer, I bought a computer with Vista. Will I get a refund for the upgrade to Windows 7?

  This summer, I bought a computer with Vista.  Will I get a refund for the upgrade to Windows 7?

  See: Frequently asked questions - Upgrade Options
  http://www.Microsoft.com/Australia/Windows/buy/offers/upgrade-FAQ.aspx TaurArian [MVP] 2005-2010 - Update Services