. Guest.toolstatus return empty
I'm checking the status and version of VMware tools at the beginning of a script, but the value of guest.toolsstatus returns empty for me. I don't know what I'm missing. I tried to run 2 different servers to make sure it wasn't my powercli installation. I intend to use an if then statement to upgrade virtual hardware once I check status and version tools. I was able to script, upgrade through VUM tools, but I would like to check these before I update. Miss me probably something simple, but I can't.
script:
$inputfile = "E:\servers.txt"
$VMname = get-Content $InputFile
{ForEach ($VMname to $VMname)
#check VMWare tools are running
$view = get-vm-name $VMname | Get-View
write-host $VMname
write-host $view.guest.toolstatus
write-host $view.config.tools.toolsversion
}
Output:
itlabvg860
7303
itlabvg861
8194
itlabvg862
8194
itlabvg863
8194
Thank you
Mike
I think that you have made a typo.
This should be (double s)
... write-host $view.guest.toolsstatus ...
____________
Blog: LucD notes
Twitter: lucd22
Tags: VMware
Similar Questions
-
IMAQ rake 3 VI - map Edge returns empty array
Hi, I have a U16 image that requires analysis using the rake 3 VI IMAQ. Out of lines of research, the strength is indicated for each point along the line of research, but the card edge (I expect brings together the strengths and assembles them in a table for each line) returns empty. Anyone else seen this?
Check the source of the "optimized" for IMAQ rake 3 Mode...
-
copy of XSLT creates a xml that returns empty while trying to access the elements using XPATH
Hello
I'm doing a copy - of the function by using the XSLT in jdev. That's what I do
< xsl: param name = "appdataDO" / >
< xsl: template match = "/" >
< ns1:applicationData >
< ns1:applicationId >
< xsl: value-of select = "$appdataDO / ns1:applicationData / ns1:applicationId" / >
< / ns1:applicationId >
< xsl: copy-of select = "/ fslo:ExternalapplicationData / fslo:ApplicationsHDRAddInfo" >
< / xsl: Copy - of >
< / ns1:applicationData >
< / xsl: template >
< / xsl: stylesheet >
After that, I can see the document created in the flow of process like this:
< ns1:applicationData >
< ns1:applicationId > MMMM < / ns1:applicationId >
< ns2:ApplicationsHDRAddInfo >
< ns3:genericFromBasePrimitive > iuoui < / ns3:genericFromBasePrimitive >
< ns4:EstimatedMarketValue > 77 < / ns4:EstimatedMarketValue >
Jih < ns4:PropertyInsuranceFee > < / ns4:PropertyInsuranceFee >
hjh < ns4:LoanOriginationFee > < / ns4:LoanOriginationFee >
KKKKK < ns4:RegistrarFee > < / ns4:RegistrarFee >
hjh < ns4:LoanCashInFee > < / ns4:LoanCashInFee >
< ns4:LoanPaidInCashFlag > cddffgd < / ns4:LoanPaidInCashFlag >
< / ns2:ApplicationsHDRAddInfo >
< / ns1:applicationData >
But whenever I am trying to extract all nodes output I get an empty result. I can copy the whole dataset in the same type of variable.
But I am unable to get the individual elements using XPATH.
I tried to use the exslt for all nodes and xslt 2.0 without success.
Namespaces may be the culprit here. The test in the jdev method can produce a result, but during the execution, the xpath expression returns empty.
I created another transformation where I try to copy the data from the DataObject precious a simple string in an another data object.
This is the test sample source xml transformation created by jdev when testing with all the namespaces, where I try to copy the data into a simple string in an another data object.
" < applicationData xmlns: xsi =" http://www.w3.org/2001/XMLSchema-instance "xsi: schemaLocation =" http://xmlns.Oracle.com/bpmpa/FS/ulo/types file:/C:/JDeveloper/NewAPP/Xfrm/xsd/ApplicationData.xsd "xmlns =" http://xmlns.Oracle.com/bpmpa/FS/ulo/types "> "
applicationId289 < applicationId > < / applicationId >
< ApplicationsHDRAddInfo >
" < genericFromBasePrimitive xmlns =" http://xmlns.Oracle.com/BPM/PA/Extn/types/BasePrimitive "> genericFromBasePrimitive290 < / genericFromBasePrimitive > .
" < EstimatedMarketValue xmlns =" http://xmlns.Oracle.com/BPM/PA/Extn/headerCategories/ "> 291 < / EstimatedMarketValue > .
" < PropertyInsuranceFee xmlns =" http://xmlns.Oracle.com/BPM/PA/Extn/headerCategories/ "> PropertyInsuranceFee292 < / PropertyInsuranceFee > .
" < LoanOriginationFee xmlns =" http://xmlns.Oracle.com/BPM/PA/Extn/headerCategories/ "> LoanOriginationFee293 < / LoanOriginationFee > .
" < RegistrarFee xmlns =" http://xmlns.Oracle.com/BPM/PA/Extn/headerCategories/ "> RegistrarFee294 < / RegistrarFee > .
" < LoanCashInFee xmlns =" http://xmlns.Oracle.com/BPM/PA/Extn/headerCategories/ "> LoanCashInFee295 < / LoanCashInFee > .
" < LoanPaidInCashFlag xmlns =" http://xmlns.Oracle.com/BPM/PA/Extn/headerCategories/ "> LoanPaidInCashFlag296 < / LoanPaidInCashFlag > .
< / ApplicationsHDRAddInfo >
< / applicationData >
And the xslt transformation
< xsl: template match = "/" >
< ns1:DefaultOutput >
< ns1:attribute1 >
< xsl: value-of select = "/ fslo:applicationData / fslo:ApplicationsHDRAddInfo / custom: LoanOriginationFee" / >
< / ns1:attribute1 >
< / ns1:DefaultOutput >
< / xsl: template >
The result is an empty attribute1. Any help will be appreciated.
Please remove attributeFormDefault = "qualified" elementFormDefault = "qualified" in your XSD
Please visit the following link:
-
Query of query count (column) returns empty not zero
This seems to be a bug in 7,0,1,116466 and 8,0,1,195765
Query of query count (column) or count (*) returns empty not zero when there is no match. Correctly returns a number when there is query matches.
For example select count (i_id) of PersonnelQuery where i_id < 100
Where does a report these?scottcook,
It's a known bug in ColdFusion 6.x which apparently has not been set.
Bug in CF6 (see the comments section of the page linked below)
http://livedocs.Adobe.com/ColdFusion/6.1/htmldocs/using_29.htmWorkaround
http://www.bennadel.com/blog/244-ColdFusion-query-of-queries-odd-count-behavior.htmReport it as a bug
http://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform -
FDMEE 11.1.2.3 report Check returns empty
Hi everyone-
A problem with our 11.1.2.3.500 FDMEE application where audit reports come back completely empty. Is not only the metadata for checking empty return rule (tiling, under title, the target accounts, rules), but the whole of the report, including the header information, which is part of the model of audit report. If it was only the rule check empty return information I believe it was a bad game to the top of the logic of Straightedge, but I find it odd that ValidationGroup/location/category/period in the header is not returned. Some screenshots below for reference:
* Note that the rule in this screenshot of the control rule simply checks to see if the POV is = 0. As no data is loaded, it should pass. Remove the rule has no bearing on the question.
Some things to note:
-Default audit report has been set to 'Check the report' system, application, and user-level
-Verification rules group has been assigned to the correct location
-This has been tested this with multiple groups of rules to check and default audit reports. This includes reducing the rule of control group to the "title" line to try to exclude a set a bad place the logic of checking rule.
-This has been tested on a test HFM application separated with the same result.
-J' have reviewed the report for the monitoring report query and I saw that he derived from the TDATACHECK table. When you do a select * query this table SQL, there is no record of. Found this very strange and probably the root of the problem, but not clear cause why this happens.
-Fix the complete log, but attention the next section, where I think the error is occurring (line begins on the journal 792).
2014-08-05 15:22:33, 110 [AIF] DEBUG: AIFUtil.callOdiServlet - START
2014-08-05 15:22:33, 203 [AIF] INFO: * BEGIN CHECKING PROCESSES *.
2014-08-05 15:22:33, 266 [AIF] INFO: * CONDITION LOGIC *.
2014-08-05 15:22:34, 982 [AIF] INFO: NO DATA
2014-08-05 15:22:34, 997 [AIF] INFO: THE TARGET CELL DATA: 0
2014-08-05 15:22:34, 997 INFO [AIF]: EXPRESSION: round (0.2)
2014-08-05 15:22:35, 075 INFO [AIF]: RESULT:
2014-08-05 15:22:35, 091 [AIF] INFO: 0.0
2014-08-05 15:22:35, 091 INFO [AIF]: EXPRESSION: 0,0 = 0
2014-08-05 15:22:35, ERROR 169 [AIF]:
2014-08-05 15:22:35, 169 [AIF] INFO: * DISPLAY LOGIC *.
2014-08-05 15:22:35, 512 [AIF] INFO: NO DATA
2014-08-05 15:22:35, 543 [AIF] INFO: THE TARGET CELL DATA: 0
2014-08-05 15:22:35, 543 INFO [AIF]: EXPRESSION: round (0.2)
2014-08-05 15:22:35, 621 INFO [AIF]: RESULT:
2014-08-05 15:22:35, 621 [AIF] INFO: 0.0
2014-08-05 15:22:35, 621 INFO [AIF]: EXPRESSION: 0.0
2014-08-05 15:22:35, 715 [AIF] INFO: RESULT:
2014-08-05 15:22:35, 715 [AIF] INFO: 0.0
2014-08-05 15:22:35, ERROR 715 [AIF]:
2014-08-05 15:22:35, ERROR 715 [AIF]: error occurred during the rule of checking running.
2014-08-05 15:22:35, 731 DEBUG [AIF]: AIFUtil.callOdiServlet - END
2014-08-05 15:22:35, 731 MORTALS [AIF]: error in CommData.checkData
Traceback (most recent call changed):
Folder "< string >", line 4730 in checkData
RuntimeError: java.lang.RuntimeException: error occurred during the screening process.
2014-08-05 15:22:35, 731 DEBUG [AIF]: CommData.updateWorkflow - START
2014-08-05 15:22:35, 731 [AIF] DEBUG:
UPDATE TLOGPROCESS
SET PROCESSENDTIME = CURRENT_TIMESTAMP
PROCESSSTATUS = 42
PROCESSENTVAL = 0
", PROCESSENTVALNOTE =" error "results" ""
WHERE PARTITIONKEY = 13
AND CATKEY = 1
AND PERIODKEY = ' 2015-12-01'
AND RULE_ID = 17
Please let me know if you have any questions or need other information. Thanks for any help in advance.
-Dan H.
Hello
After review of your journal:
2014-08-05 15:22:33, 110 [AIF] DEBUG: CommData.updateWorkflow - END
2014-08-05 15:22:33, 110 [AIF] DEBUG: AIFUtil.callOdiServlet - START
2014-08-05 15:22:33, 203 [AIF] INFO: * BEGIN CHECKING PROCESSES *.
2014-08-05 15:22:33, 266 [AIF] INFO: * CONDITION LOGIC *.
2014-08-05 15:22:34, 982 [AIF] INFO: NO DATA
2014-08-05 15:22:34, 997 [AIF] INFO: THE TARGET CELL DATA: 0
2014-08-05 15:22:34, 997 INFO [AIF]: EXPRESSION: round (0.2)
2014-08-05 15:22:35, 075 INFO [AIF]: RESULT:
2014-08-05 15:22:35, 091 [AIF] INFO: 0.0
2014-08-05 15:22:35, 091 INFO [AIF]: EXPRESSION: 0,0 = 0
2014-08-05 15:22:35, ERROR 169 [AIF]:
2014-08-05 15:22:35, 169 [AIF] INFO: * DISPLAY LOGIC *.
2014-08-05 15:22:35, 512 [AIF] INFO: NO DATA
2014-08-05 15:22:35, 543 [AIF] INFO: THE TARGET CELL DATA: 0
2014-08-05 15:22:35, 543 INFO [AIF]: EXPRESSION: round (0.2)
2014-08-05 15:22:35, 621 INFO [AIF]: RESULT:
2014-08-05 15:22:35, 621 [AIF] INFO: 0.0
2014-08-05 15:22:35, 621 INFO [AIF]: EXPRESSION: 0.0
2014-08-05 15:22:35, 715 [AIF] INFO: RESULT:
2014-08-05 15:22:35, 715 [AIF] INFO: 0.0
2014-08-05 15:22:35, ERROR 715 [AIF]:
2014-08-05 15:22:35, ERROR 715 [AIF]: error occurred during the rule of checking running.
It seems that there are problems with your rules of audit. Have you checked the carefully?
HFM data are inserted into TDATACHECK according to your definition.
Please try with a simple rule for a single account. Use the wizard to create the rule that you do not miss any field
Concerning
-
Fill() return empty ArrayCollection collection
Hello
I'm new to SDS and do not know why the fill() method returns nothing, even if the assembler returns a list of 3 items. I know the list is back nothing because when I see the length of the ArrayConnection, it is 0.
I'm Tournai on the debugging logs and see the 3 items returned. Do you have tips on how I can solve this problem?
Is there somewhere in the configuration where I specify the Java class maps to ActionScript class B? I just deleted my corresponding ActionScript class and always the same newspapers. I suspect that the SDS does not know how to map the Java class in the ActionScript class so that it gives me an empty list and throws the results. Does this sound right? If there is some sort of automatic mapping, I was expecting to see an error in the log after I deleted the ActionScript class.
Thank you
Jamie
[Flex] 18/05/2007 12:19:31.443 [DEBUG] [DataService.Transaction] committed trans
action
[Flex] 18/05/2007 12:19:31.443 [DEBUG] [Message.Data.fill] after calling a service:
data service
answer: Flex Message (flex.data.messages.SequencedMessage)
sequenceId = 0
sequenceSize = 3
(no proxy sequence)
clientId = null
correlationId = null
destination = company
messageId = 7A2A0D8F-C32B-80BC-D593-4551B71320F1
timestamp = 1179515971443
timeToLive = 0
body =
[
Company (companyId = 100, name = null, address = null, status = null, zip = null undue
Try = null),
Company (companyId = 101, name = null, address = null, status = null, zip = null undue
Try = null),
Company (companyId = 102, name = null, address = null, status = null, zip = null undue
Try = null)
]I found the answer to my own question. It was just a race condition. You can not read the size of the ArrayCollection collection immediately. The list takes some time to complete.
-
body of the message search returned empty
I deleted global-messages - db.sqlite and re-indexed my mail.
It is an imap account.
I have "Search subfolders" and "Run Search Server" selected.
I get empty results when searching (body: contains: "my search query")
I'm looking for text that I know is in the body of e-mail messages.
I even open an e-mail, the text copied and pasted and getting no results.
Thunderbird 24.4.0
Windows XPThanks for the screenshot.
You can try the global search and quick filter toolbar?
-
EVENTDATE = 07/10/2004 15:25:06
Hi, I have the following query that is return nothing / white how can I find the file above using query below
SELECT * FROM TESTDATE WHERE to_DATE(event_dte_tme,'YYYY/MM/DD fmHH:MI:SS PM') between to_date('2004/10/12 3:25:06 PM','YYYY/MM/DD fmHH:MI:SS PM') and to_date('2004/10/07 3:25:06 PM','YYYY/MM/DD fmHH:MI:SS PM')
So why you use to_date in date field... Simply delete to_date and run the below...
SELECT * FROM TESTDATE
WHERE the event_dte_tme between to_date('2004/10/06 3:25:06 PM','YYYY/MM/DD fmHH:MI:SS PM') and to_date('2004/10/12 3:25:06 PM','YYYY/MM/DD fmHH:MI:SS PM')
Thank you
Ann
-
Get-view Guest.ToolStatus result invalid
When I run
C:\>(Get-View -ViewType VirtualMachine -Filter @{"Name"="VM Name"}).Guest.ToolsStatus C:\>toolsOk
But vSphere reporting tools such as "Expired" on this particular virtual machine. To check the version of the tools that they are certainly more up-to-date. Is this a bug in the cmdlet? Is there a better way to retrieve VM tool with powercli status?
You can check the property toolsVersionStatus instead of toolsStatus ?
This last one is amortized in vSphere 4.x
-
Creative cloud returns empty heeelp
I installed creative cloud and downloaded some apps, but now when I open it, everything is empty and I can't use one of the applications I downloaded. I uninstalled and reinstalled several times. Someone knows how to fix this or why you would do that?
Hi acr1324,
Please follow it mentioned below as follows:
WIndows:
Go to Name/AppData/Local/Adobe/OOBE/opm.db C/users/user and delete it.
Mac:
~/Library/Application Support/Adobe/OOBE/opm.db and trash.
Launch desktop CC and try to connect.
Kind regards
Romit Sinha
-
XML query returns empty when tags no data
Hi all
I have a problem that I can't solve.
I have the following query:
The query returns the XML code in the desired structure.select xmlelement ( "users", xmlagg ( xmlelement ( "user", xmlelement ( "username", e.pin ), xmlagg ( xmlelement ( "details", xmlforest ( e.password as "password" ,e.first_name as "forename" ,e.surname as "surname" ,'0' as "retired" ,e.email_address as "email" ,e.telephone_number as "phone" ,'No External Ref' as "externalRef" ,add_months(sysdate,+60) as "expiryDate" ) ) ) ) ) ) xml_out from aqaost_examiners e group by e.pin;
But the problem I have is that when there is no data found by the query, I always get a single row returned by the following: < user > < / users >
I tried so many things to try to have the query return nothing if there is no data available, but I can't do without something else goes wrong (to mess up the XML structure, etc.).
Please is - can anyone help or point me in the right direction?
I thank very you much in advance!
RobinHello
Peter,
This is the GROUP that does this.
Actually no, the GROUP BY refers to the deepest XMLAgg and is required if e.pin is not unique.
Let it out, and you also seem to have of many XMLAGG (?)
That's assuming that e.pin is unique within the table (which is probably a fair assumption in this case).
In fact, the behavior comes from the XMLAgg in the foreground:
SQL> select xmlelement("users", 2 xmlagg( 3 xmlelement("user", 4 xmlelement("username", e.empno) 5 , xmlelement("details", 6 xmlforest( 7 e.ename as "name" 8 , e.job as "job" 9 ) 10 ) 11 ) 12 ) 13 ) xml_out 14 from scott.emp e 15 where 1 = 0 16 ; XML_OUT -------------------------------------
As with other global functions (such as SUM or AVG) adding a GROUP OF 'something' solves the problem:
SQL> select xmlelement("users", 2 xmlagg( 3 xmlelement("user", 4 xmlelement("username", e.empno) 5 , xmlelement("details", 6 xmlforest( 7 e.ename as "name" 8 , e.job as "job" 9 ) 10 ) 11 ) 12 ) 13 ) xml_out 14 from scott.emp e 15 where 1 = 0 16 group by null 17 ; no rows selected
Robin,
So the more intimate XMLAgg is really necessary, you can use a subquery:select xmlelement("users", v.users) from ( select xmlagg( xmlelement("user", xmlelement("username", e.empno) , xmlagg( xmlelement("details", xmlforest( e.ename as "name" , e.job as "job" ) ) ) ) ) as users from scott.emp e group by e.empno ) v where v.users is not null ;
-
I created a form of a simple page yesterday with a few lists of radio button and text fields. Once it was all done and registered, I have open in Adobe Acrobat 9 Pro and used the "Distribute form" option to send about 30 of our users. This morning, I came to find that 6 or 7 users e-mail forms and when I opened the and imported in Tracker responses, I found that they were all white. Even detach them from the e-mail and open them separately, they came as white. I decided to go to one of the recipient computers and fill out the form here to test, and it was always empty when I opened on my computer. I'm assuming I did something wrong when creating the form, but I don't know what. Anyone seen this before? I would appreciate help with this.
Thank you.
-Chris
This means that you are using an old designer... .choose the Normal option. Which does the same thing I described (they tried to make it more descriptive in later versions).
Paul
-
Qyery return empty results using dbms_xmlgen does not work as expected
Hi group.
I use the following code in a procedure PSQL
procedure selectXML (consulted in varchar2, xmlout on clob) as
context dbms_xmlquery.ctxtype;
Resultado clob.
integer from Tam.
context_gen dbms_xmlgen.ctxHandle;
Start
IF useDBMS_XMLGEN THEN
BEGIN
context_gen: = DBMS_XMLgen.newContext (consulta);
DBMS_XMLgen.usenullattributeindicator (context_gen, true);
result: = DBMS_XMLgen.GetXml (context_gen);
TAM: = DBMS_LOB. GetLength (result);
DBMS_LOB. Copy (XMLout, resultado, Tam, 1, 1);
DBMS_XMLgen.closecontext (context_gen);
ON THE OTHER
Context: = DBMS_XMLQUERY.newContext (consulta);
DBMS_XMLQUERY.usenullattributeindicator (Context, true);
result: = DBMS_XMLQUERY. GetXml (Context);
TAM: = DBMS_LOB. GetLength (result);
DBMS_LOB. Copy (XMLout, resultado, Tam, 1, 1);
DBMS_XMLQUERY.closecontext (Context);
END IF;
end;
If the query used returns nothing (for example ' SELECT * FROM dual WHERE rownum = 0') using the DBMS_XMLQUERY code, the function getxml() method returns
<? XML version = "1.0"? >
< ROWSET / >
but using the DBMS_XMLGEN code, the function getxml() method returns nothing.
This behavior is normal or I do something wrong?
I'm testing the code in Oracle9i Enterprise Edition Release 9.2.0.7.0 but must also be run, Oracle 8 and 10
Thanks in advance
JavierThis behavior is normal or I do something wrong?
This seems to be a normal behavior by design:
SQL> select 1 id, dbms_xmlgen.getxml('select * from dual where 1=0') xml from dual union all select 2, dbms_xmlquery.getxml('select * from dual where 1=0',0) xml from dual union all select 3, dbms_xmlquery.getxml('select * from dual where 1=0',1) xml from dual union all select 4, dbms_xmlquery.getxml('select * from dual where 1=0',2) xml from dual ID XML --- ---------------------------------------------------------------------------------------------------- 1 2
3 ]> 4 -
Hello
I have a form with 5 fields drop-down boxes. There are 4 choices: Blank (the default), Y, N, n/a. I have two fields that produce a calculation. We're going home "#" and the other a product % of Y
In the default state of white, calculations are ' 0' and 0 ' % 0'. The problem is that, unfortunately, some providers will want a paper printed and fields have these zeros inside.
How can I do if blank? I tried several variants without result.
1 ' 0 0 ' script:
Totally var = 0;
var total = 0;
for (var i = 1; i < = 5; i ++) {}
var f = this.getField ("JJCRDropdown" + i);
If {(f.valueAsString=="Y)"}
Totally ++;
total ++;
} Else if (f.valueAsString == "N") {}
total ++;
}
}
If (total == 0) event.value = "";
else event.value = total / total;
2nd script '% 0':
Totally var = 0;
var total = 0;
for (var i = 1; i < = 5; i ++) {}
var f = this.getField ("JJCRDropdown" + i);
If {(f.valueAsString=="Y)"}
Totally ++;
total ++;
} Else if (f.valueAsString == "N") {}
total ++;
}
}
If (total == 0) event.value = "";
else event.value = total / total;
I think that what might work if I could say, but I can't find the reference for this:
If (totally == 0 | total == 0) AND (totalNA<5) event.value="">5)>
To use this code:
If ((totalement == 0 || total == 0)) & (totalNA<5)) event.value="">5))>
-
Empty data service returns an object
Hello
I'm calling from the flex data service to load my data grid. In debugging, I see the arrraycollection in the fill method is returned empty. Here are the details...
My .java file has the same name with the game and have access to functions that are set by my assembler of java class.
I'm calling other methods of filling and they seem to work except this one, well...
The problem was that the name of the destination 'codecoverage' was identical to that of one of the packages where my .java file was there. Changed this name and things started working... :-)
Maybe you are looking for
-
Okay, so my problems are...(1) I downloaded a theme for the first time and when I did, it worked perfectly fine. After updating, I download the theme again and it helped, but the theme will not change the look of my browser. When I tried one of the r
-
I opened my laptop and a pop-up message appeared when I opened Foxfire indicating something was Foxfire not be able to secure my computer through the operating system running on my Mac.
-
Alarm calls on multiple phones and iPads. How to stop this?
Recently updated to 9.2 - ring now calls entering mine and phones my husband and iPads. How to prevent that from happening. Never done this before the update...
-
How to restore the size of my text that has shrunk? view and clicking on text size and plu does not
-
I don't know how to explain it so here is a picture. Most of the information in the cells seems to be hidden. One who shows was my last entry. I didn't change the color of my category 'family '.