Guest user can deny internet?

Similar Questions

• the administrator cannot access programs, but guest user can

  When I am logged in as an admin user can't access programs, it happens that the program does not exist. When I try to go on internet with Explorer he asks me what program I want to use to access the internet. If I change my user and just go as a guest he let me go on the internet with no problems and have access to all the programs on the desktop. also, when I am logged on as administrator a lot icons in the toolbar have disappeared. It's as if the admin is blocked for doing things, but a guest user can.
  Thank you

  Hello

  The computer seems to work fine in safe mode. The diagnostic mode disables all third party software and services that run in the background. To emulate a similar situation in normal mode, you can run clean boot.

  To perform a clean boot on a computer that is running Windows Vista, follow these steps.

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after starting the computer, reinstall and run the program and see if the problem is resolved.

  Check if you have the same problem... If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

  http://support.Microsoft.com/kb/331796

  To restore your computer to a Normal startup mode, follow these steps.

  1. click on start in the box start the search.

  2. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  3. click on the general tab.

  4. click on Normal Startup - load all device drivers and services and then click OK.

  5. When you are prompted, click on restart to restart the computer.

  Concerning
  Anthony.

• Guest user can access the system tools?

  Start menu > all programs > Accessories > system tools

  This allows the user access to computer, control panel (and running and same command prompt), although I selected "don't display this item" through properties > Start Menu > customize. Is there something I don't understand? I don't want a guest user to gain access to ANY 'system tools '. How can I accomplish this?

  Hi Jim,.

  Thanks for posting your query in Microsoft Community.

  The guest account providing minimum privileges to perform tasks not requiring administrative privileges.  People using the guest account cannot install software or hardware, change settings, or create a password. Because the guest account allows a user to log on to a network, browse the Internet, and shut down the computer, you must disable the guest account when not in use.

  You can open the command prompt in elevated mode (with administrative privileges), which is actually necessary to run multiple commands that can affect your system. If you use Windows 7 Professional or higher edition, group policy can be edited privileges for the guest account. To learn more, you can re-post your query in the TechNet forums calling for changes in the group policies for the guest account.

  For more information, see:

  Enable or disable the guest account the

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Guest user can connect to my main account without password

  Hello. I had two accounts in my laptop, a my main account and the other is the guest account. My friend has restarted the laptop using the guest account. After this restart, it automatically to connect to my main account without any password. I don't want people to easily connect to my account without type in any password. I filmed a video as well. I can send if necessary. Is it possible to fix this? Any help would be appreciated. Thank you.

  Disable the automatic connection

  Set your Mac to automatically connect on startup - Apple Support

• All they can do is go on the Internet Explore. So my question is how to get features of office for a guest user?

  Hi, I want to let my friend use my laptop and I need to set up a guest account. The problem is that when I did it, we cannot access Office so that the person cannot create any word or excel files, etc. All they can do is go on the Internet Explore. So my question is how to get features of office for a guest user?

  Don't add a guest account, add another standard user if you want another user to access programs as well.

  User account - add a new user in Windows 8

• Can you run the Interface of Inspection VBAI only once and then once more by a guest user?

  Can you run the Interface of Inspection VBAI only once and then once more by a guest user?

  I don't think I understand what you are trying to accomplish. You can connect a button on the front of the smart camera and trigger each acquisition. In VBAI check the triggered Acquisition under the tab trigger for the step to acquire Image (smart camera).

  Your smart camera is hooked up to a monitor? Is there something that you must do in LabVIEW that you can't do in VBAI about the step of user input?

• Standard user (guest) account can not access my wifi connection

  Original title: I installed ie9 on my administers ACCT. and she sails very well, but now the standard (guest) user account cannot access my wifi connection. How can I get the hanging guest account?

  Windows vista 32 bit

  Hello

  You get the error message? If Yes, what is the full and exact error message?

  Method 1:

  Try to run the troubleshooter and check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  I suggest you to refer to the article and check if it helps.

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Method 3:

  I suggest to disable the antivirus software and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

• I can't access the programs normally on my guest user.

  My guest user, for 2 years, always ask those who use it to find the program every time I click on the corresponding icon. Sometimes the programs can be found at other times, not so much. For example Microsoft Word must be accessible by opening a file that is already using the program. It cannot be found. It's annoying and I really want to be able to access programs the normal way again.

  Hello

  Step 1:

  Try to run a scan for viruses with the Microsoft Safety Scanner and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Step 2:

  I also suggest you to see link below and check if it helps.

  http://support.Microsoft.com/kb/950505

• How can I disable the guest user to close the PC while the Admin is connected?

  I'm running Windows 7 Ultimate. I found out how to disable the guest user closing at all via the local security policy, but then they can't stop even if the Admin account is offline.

  To clarify a bit, say I want to give my PC to someone, I usually click on change user and connect using the guest account. In this way, they can't access my account because it asks for a password. I want that in such a case, they should not be able to stop the PC as my admin account is always logged.

  However, if someone booted the PC themselves and use the guest account, then they should be able to close too, as my Admin account has not been connected.

  I'm running Windows 7 Ultimate. I discovered how to disable the guest user closing all through local security policy.

  It is the correct method. It is as robust as it is unconditional.

  If you want to have your cake and eat it the guest account must use a powerful "agent" to perform the functions of judgment. A scheduled task would be such an agent. It might work as follows:

  1. Create a scheduled task that runs Script1 to perform these tasks:
     -Check if the C:\Shutdown\Shutdown.txt file exists.
     -If not, the output of the script.
     -If this is the case, delete Shutdown.txt.
     -Check if there is an administrator session. If so, the output of the script.
     S ' there is no live administrator session, shut down the computer by using shutdown.exe.
     The task must run under an administrator account once every 3 minutes.
  2. Create a shortcut on the desktop for the Guest user calling Script2 for these tasks:
     -Check if there is an administrator session.
     -If this is the case, create a pop-up to inform the user that the machine cannot be stopped.
     -If it is not, create the C:\Shutdown\Shutdown.txt file. The scheduled task will 'see' this file and will stop the machine.

• AnyConnect users can access internal network

  Hello!

  Just sat up a new Anyconnect VPN solution for a customer. It works almost perfect.

  Anyconnect users can reach the internal network storage. The anyconnect users can access the internet, but nothing on the network internal.

  (Deleted all the passwords and public IP addresses)

  ASA 4,0000 Version 1

  !

  ciscoasa hostname

  names of

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.9.1 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP address

  !

  passive FTP mode

  DNS domain-lookup outside

  DNS server-group DefaultDNS

  Server name 213.80.98.2

  Server name 213.80.101.3

  network obj_any object

  subnet 0.0.0.0 0.0.0.0

  access-list SHEEP extended ip 192.168.9.0 allow 255.255.255.0 192.168.9.0 255.255.255.0

  AnyConnect_Client_Local_Print deny ip extended access list a whole

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq lpd

  Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq 631

  print the access-list AnyConnect_Client_Local_Print Note Windows port

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq 9100

  access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol

  AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.251 eq 5353

  AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol

  AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.252 eq 5355

  Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq 137

  AnyConnect_Client_Local_Print list extended access udp allowed any any eq netbios-ns

  pager lines 24

  Enable logging

  logging of debug asdm

  Within 1500 MTU

  Outside 1500 MTU

  mask 192.168.9.50 - 192.168.9.80 255.255.255.0 IP local pool SSLClientPool

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  NAT (inside, outside) source Dynamics one interface

  !

  network obj_any object

  NAT dynamic interface (indoor, outdoor)

  Route outside 0.0.0.0 0.0.0.0 1

  Timeout xlate 03:00

  Pat-xlate timeout 0:00:30

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  identity of the user by default-domain LOCAL

  AAA authentication enable LOCAL console

  AAA authentication http LOCAL console

  LOCAL AAA authentication serial console

  the ssh LOCAL console AAA authentication

  AAA authentication LOCAL telnet console

  Enable http server

  http 192.168.9.0 255.255.255.0 inside

  http 0.0.0.0 0.0.0.0 inside

  http 0.0.0.0 0.0.0.0 outdoors

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

  Telnet timeout 5

  SSH timeout 5

  SSH group dh-Group1-sha1 key exchange

  Console timeout 0

  dhcpd outside auto_config

  !

  dhcpd address 192.168.9.2 - 192.168.9.33 inside

  dhcpd ip interface 192.168.9.1 option 3 inside

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  allow outside

  AnyConnect image disk0:/anyconnect-win-2.5.3046-k9.pkg 1

  AnyConnect enable

  tunnel-group-list activate

  internal SSLClitentPolicy group strategy

  internal SSLClientPolicy group strategy

  attributes of Group Policy SSLClientPolicy

  value of server DNS 192.168.9.5

  client ssl-VPN-tunnel-Protocol

  the address value SSLClientPool pools

  attributes of Group Policy DfltGrpPolicy

  VPN-tunnel-Protocol ikev1, ikev2 ssl clientless ssl ipsec l2tp client

  VPN Tunnel-group type remote access

  type tunnel-group SSLClientProfile remote access

  attributes global-tunnel-group SSLClientProfile

  Group Policy - by default-SSLClientPolicy

  tunnel-group SSLClientProfile webvpn-attributes

  enable SSLVPNClient group-alias

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:6a58e90dc61dfbf7ba15e059e5931609

  : end

  Looks like you got the permit vpn sysopt disable to enable:

  Sysopt connection permit VPN

  Also remove the dynamic NAT depending on whether you have already configured under the NAT object:

  No source (indoor, outdoor) nat Dynamics one interface

  Then 'clear xlate' once again and let us know if it works now.

• I'm locked out guest user (only one account on my Mac)

  I recently bought a macbook model 2013 end pro on eBay and the seller gave me the password for the user "guest".

  I changed the password to a blank password that I didn't have a password but I did not create a new user account.

  last night I installed clean OS X El Capitan, when installation is complete asked me a password at the login screen.

  I managed to pass the login password, but now I am trying to create a new password in system preferences, but I can't because I'm required to use a password to allow the change.

  Guest user is the only account on my Mac, so I have no idea what to do to get out of this mess.

  Thanks in advance to anyone who can offer support.

  You wipe the drive and then do a fresh install of Mac OS X. You can do this via the network of restoration:

  Installer Lion through Mavericks

  1. Restart the computer and after the chime hold down the keys COMMAND + OPTION + R until it appears a globe. Wait patiently - 5 - 15 minutes - until appears the Utility Menu.
  2. Select in the Menu Utility disk utility and click on the continue button.
  3. Disk utility charges and select the player (usually, it's the entry Out-bumpy with of the mfgr.) ID and size) of the list to one side. Click the Partition tab in the main window of disk utility.
  4. Under the scheme of Volume defined heading the number of partitions in a single volume. Click the Options button, set the GUID partition scheme, and then click the OK button. Define the type of Format Mac OS extended (journaled). Click the Partition button and wait until the end of the process. Quit disk utility and re-enter the Utility Menu.
  5. Select reinstall OS X in the Utility Menu, and then click the install button.

  This should install it the original version of OS X comes with the computer originally.

• Guest user

  After I updated to 10.11.6 on a MacBook Pro, I have now the option of guest user at sign on.  He is completely disabled in the preferences, but appears on each connection.  How can I get rid of him?

  How to disable the guest user | Apple support communities

  Tip for the disabled guest user appears at startup

• How can I block others to see my favorites if the password is not entered correctly? Now the user can cancel favorite startup password & view belongs to me

  I have the master password, and he asked to join the splash screen. Other users can view my favorites by canceling the password prompt. I want some more to avoid seeing my favorites if they do not know the password

  The master password is not intended to be used in this way.
  The password is only intended to encrypt the names and passwords stored in the Manager password with a level of additional encryption.
  The Congressman didn't block access to Firefox, if you get a prompt MP when starting Firefox, then you can cancel the command prompt and use Firefox normally.
  Only, you cannot access the passwords (you will get an another guest to provide the MP if necessary).

• Go to the guest user

  When I switch to the guest user apparently opened with sure safari and restart... N if I restart and open it is not dock and nothing to the other just only safari... What should I do?

  This particular guest account has for Safari: nothing you can do about it. If you need a less limited guest account, set one up in System Preferences > users and groups.

• Guest user FileValut

  I tried to get rid of the guest user, so I turned off find it my mac off earned file and the guest user is gone.

  But after that I turned on file was the guest user appears once again, I don't no how long it takes this file got to finish the job.

  Why my macbook is dragging me? Can someone help me with this?

  Maybe:

  http://www.Peachpit.com/articles/article.aspx?p=2300563 & seqNum = 2

  10 things you might not know FileVault 2