GUI Builder

Similar Questions

• BlackBerry GUI Builder

  Hi all

  I try to get in the development of Blackberry, but I'm pretty useless to graphics and design interfaces, (I want to focus on the back-end logic) - no one knows generator GUI that displays the code too so that I can add logic in the buttons etc?

  I downloaded studio MDS (not too sure what it was designed to do really) and found a very good GUI generator in there, but there is no code to go with it, which is not good for me. Perhaps I miss an option to display code somewhere?

  If anyone has any suggestions, please let me know,

  (I use eclipse (and have the Blackberry plugin (can't find a GUI Builder in there if) If this is useful, but I'm open to the use of new environments so that's what it takes!))

  See you soon,.

  Graham

  If you are looking for your orders to other port J2ME platforms, see LWUIT.

  It's the Sun. This is something similar slight swing superimposed on MIDP 2.0.

  It does not use the native blackberry UI API, however.

  I don't know about a GUI generator for it. It is a generator of matisse for LWUIT, but

  I did not follow upward to this topic.

  -jeff

• GUI building in AS3

  Sort of a newbee question, I hope that there is a simple answer-

  I started by the construction of the entrance of the user 'Form' for my request on a mounting frame using the Flash GUI application.  Now, I want to move this to actionscript and take direct control of the code to build the interface.

  Is there somewhere in the Flash CS4 interface where you can select an item in the graphical interface (say a list box control) that you designed and say "Copy to Actionscript", and it will give you the code (without names) which is necessary to generate this element with the current properties?

  If I select my box item drop-down list on the timeline that I gave a few properties to hit "Copy to Action Script", and he would give me something like this:

  "var myComboBox:ComboBox = new more;
  myComboBox.addItem ({label: "IItem 1", price: 0.34});
  myComboBox.addItem ({label: "Item 2", price: 13.19});
  myComboBox.addItem ({label: "item 3", price: 2.96});
  myComboBox.addItem ({label: "Item 4", price: 3.49});
  myComboBox.addItem ({label: "item 5", price: 1.27}); »

  or,

  Is there a file where you can view the internal 'code' that produces graphical interface (if any)?

  Thank you.
  

  No, there is nothing that will create the code for a symbol for you. You can build your clips, then right click, select properties and export for ActionScript. Give it a class name and then you can use the class name in your code, to make the items on stage and it will otherwise control.

  For example - to create a graph of button and turn it into a MovieClip. Remove from the scene. In the library, go to properties of the element and give a name of myButton class.

  In your code AS you can then do:

  var aButton:myButton = new myButton();

  addChild (aButton);

  aButton.x = 100;

  aButton.y = 100;

  aButton.alpha =. 5;

  aButton.addEventListener (MouseEvent.CLICK, myButtonClicked, false, 0, true);

  function myButtonClicked(e:MouseEvent):void

  {

  trace ("button clicked");

  }

  etc.

  If your clips were more contained, provide the instance name for that other content and you can also control. For example, if your button contained a component with an instance name of "arrow", you could do (using the example above):

  aButton.arrow.alpha =. 2;

• GUI Builder Update... is there any

  Hello

  RIM announced it would be releasing a GUI generator for application development sometimes by the middle of 2010.  It is now 2011.

  Is there news on this? The project has been abandoned?  Is there a new release date?  Is there a plugin for Eclipse, we can use to speed things along?

  Yes. The project was abandoned and is certainly not come to BB - OS. Maybe it'll come for QNX operating system, but I highly doubt it.

• How to install the plugin of Flash Builder for Eclipse 4 (Juno) 4.6

  I just download Juno (Eclipse 4.2 32 bit) and wanted to install my plugin FB 4.6, but the installer says "Adobe Flash Builder requires Eclipse 3.6 or later" - which is superimposed, like Juno is the last and version 4.

  Looks like a bug with the installer doesn't recognize any version of Eclipse above 3.X.

  How can I work around this?

  Thank you

  B

  Install on Eclipse 3.7 and then copy the dropins on 4.2 installation folder.

  The first eclipse start was slow and I got the first point of view switch Flash NullPtr. But on the next departure, everything was ok.

  I can debug, GUI building, create new Flash projects... Maybe some things will not work... But I don't think that I'll need them.

• HP Deskjet 3521: HP Deskjet 3521 Linux Kubuntu - HPLIP problems

  I installed Kubuntu 15.04 on a Dell Latitude D510 with 2 GB of RAM. I used the installation wizard device driver HP to http://hplipopensource.com/hplip-web...20_series.html to download the linux version Ubuntu of HPLIP v 3.15.7. I followed the instructions to install my printer software all-in-one HP3521.

  Kubuntu linux at startup I get the following error message:

  State HPLIP service

  No system found on the system tray

  Impossible to start, leave

  When I run a Simple Scan, I get the following error message:

  No Scanners detected.

  I opened system settings and clicked on printers

  Information and settings are correct.

  HP-check - t reports:

  Arnett@Arnett-Latitude-D510: ~ $ hp-check - t
  Save the output in the log file: /home/arnett/hp-check.log

  HP Linux Imaging and Printing System (ver. 3.15.7)
  Dependency/Version Check Utility worm. 15.1

  Copyright (c) 2001-15 Hewlett-Packard Development Company, LP
  This software comes WITHOUT ANY WARRANTY.
  It is free software, and you are welcome to distribute
  under certain conditions. See the COPY of the file for more details.

  Note: hp-check can be run in three modes:
  1. check mode (-c or - compilation) compilation: use this mode before compiling the HPLIP
  provided source tarball (. tar.gz or .run) to determine if the appropriate dependencies are installed
  to compile successfully HPLIP.
  2. performance check (r or - run) mode: use this mode to determine if a distribution provided
  package (.deb, .rpm, etc.) or an already built provided HPLIP tarball has the right
  dependencies, installed to run successfully.
  3. the two and run-compilation mode check (b or - both) (by default): this mode will check
  the two cases above (the two dependencies of compilation and execution).

  Types of audit:
  a. EXTERNALDEP - external dependencies
  b. GENERALDEP - General dependencies (required for the compilation and execution)
  c. COMPILEDEP - compile time dependencies
  d. [all are running controls]
  PYEXT SCANCONF AUTHORIZATION OF QUEUES

  Types of status:
  Ok
  LACK - dependence or missing or plug-in authorization
  SE - dependence-Incompatible version or Plugin-version

  ---------------
  | SYSTEM INFO |
  ---------------

  Kernel: 3.19.0 - 26-generic #28 - Ubuntu SMP Tue August 11 at 14:16:45 UTC 2015 GNU/Linux
  Host: arnett-Latitude-D510
  Proc: 3.19.0 - 26-generic #28 - Ubuntu SMP Tue August 11 at 14:16:45 UTC 2015 GNU/Linux
  Distribution: ubuntu 15.04
  Number of bits: 32-bit

  -----------------------
  | HPLIP CONFIGURATION |
  -----------------------

  HPLIP-Version: HPLIP 3.15.7
  HPLIP-homepage: / usr/share/hplip
  HPLIP-Installation: Automatic Installation is supported for the version of 15.04 distro ubuntu

  Current content of ' / etc/hp/hplip.conf' file:
  # hplip.conf. From the hplip.conf.in to configure.

  [hplip]
  version = 3.15.7

  [directories]
  Home = / usr/share/hplip
  Run = / var /.
  PPD = / usr/share/ppd/HP
  ppdbase = / usr/share/ppd
  doc=/usr/share/doc/hplip-3.15.7
  HTML=/usr/share/doc/hplip-3.15.7
  icon = / usr/share/applications
  cupsbackend = / usr/lib/CUPS/backend
  cupsfilter = / usr/lib/cups/filter
  DRV = / usr/share/cups/drv/hp
  bin = / usr/bin

  # Following values are determined to set the time and cannot be changed.
  [configure]
  network-build = yes
  libusb01-construction = no
  pp-build = no
  GUI-build = yes
  Scanner-build = yes
  Fax-build = yes
  dbus-build = yes
  cups11-construction = no
  doc-build = yes
  shadow-build = no
  HPIJS-install = no
  Foomatic-drv-install = no
  Foomatic-ppd-install = no
  Foomatic-rip-hplip-install = no
  hpcups-install = yes
  cups-drv-install = yes
  cups-ppd-install = no
  internal-tag = 3.15.7
  limited build = no
  UI-toolkit = qt4
  Qt3 = No.
  Qt4 = yes
  policy-kit = no
  Lite-build = no
  udev_sysfs_rules = no
  hpcups-only-build = no
  HPIJS-only-build = no

  Current content of ' / var/lib/hp/hplip.state' file:
  Plugins are not installed. Could not access file: no such file or directory

  Current content of ' ~ /.hplip/hplip.conf' file:
  [installation]
  Date_Time = 27/08/2015-12:59:56
  version = 3.15.7

  [update]
  notify_upgrade = true
  last_upgraded_time = 1440525280
  pending_upgrade_time = 0

  [Settings]
  systray_visible = 0
  systray_messages = 0

  [last_used]
  device_uri = hp:/net/Deskjet_3520_series?ip=192.168.1.117
  printer_name =
  working_dir =.

  [orders]
  Scan = / usr/bin/xsane v % SANE_URI %

  [update]
  rate = 30
  enable = false
  Type = 1

  [survey]
  enable = false
  interval = 5
  device_list =

  [fax]
  voice_phone =
  Email_Address =

  <>
  Version >

  --------------------------
  | External dependencies.
  --------------------------

  GS GhostScript - interpreter PostScript and PDF and previewe
  r 7.05 REQUIRED 9.15 OK-
  scanimage, scanimage - Shell digitization program OPTIO
  NAL 1.0 1.0.24 OK.
  xsane xsane - scanner Graphical frontend for SANE OPTIO
  NAL 0.998 0.9 OK.
  cups, CUPS - Common Unix Printing System CONDITIONS
  1.1 2.0.2 RED OK "CUPS Scheduler runs."
  PolicyKit to PolicyKit - administrative policy framework OPTIO
  NAL - 0,105 OK-
  network network - wget OPTIO
  NAL - THE 1.16.1 OK-
  OPTIO avahi-utils avahi-utils
  NAL - 0.6.31 OK-
  dbus DBus - Message CONDITIONS bus system
  RED - 1.8.12 OK-

  -------------------------
  | General dependencies.
  -------------------------

  libcrypto libcrypto - cryptographic library OpenSSL CONDITIONS
  RED - 1.0.1 OK-
  Python-dbus Python DBus - Python bindings for DBus REQUIRED
  0.80.0 1.2.0 OK RED-
  Reportlab - OPTIO Python PDF Library ReportLab
  NAL 2.0 3.1.44 OK.
  Python-notify Python libnotify - Python bindings for libnotify notif Office
  OPTIONAL wing - OK-
  PyQt 4 interface - Qt PyQt4 for Python (for the version of Qt 4.x) CONDITIONS
  4.0 RED 4.11.3 OK.
  Python-xml libraries Python XML CONDITIONS
  RED - 2.1.0 OK-
  libusb libusb - USB CONDITIONS library
  RED - 1.0 OK-
  CUPS cups-images - TERMS of image development files CUPS
  RED - 2.0.2 OK-
  libnetsnmp libnetsnmp-devel-devel - SNMP networking of development of the library of the CONDITIONS files
  5.0.9 RED 5.7.2 OK-
  SANE sane-devel - digitization of library CONDITIONS development files
  RED - 1.0.24 OK-
  PIL PIL - Python Imaging Library (required for command-line scan wi
  HP e-scan) OPTIONAL - 1.1.7 OK.
  python2X Python 2.2 or higher - programming Python CONDITIONS language
  RED 2.2 2.7.9 OK.
  PyQt4-dbus PyQt 4 DBus - DBus for PyQt4 CONDITIONS Support
  4.0 RED 4.11.3 OK.
  libjpeg libjpeg - JPEG CONDITIONS library
  RED - OK-
  libpthread libpthread - POSIX threads library CONDITIONS
  RED - 2.21 OK-
  python-devel Python-devel - Python CONDITIONS development files
  RED 2.2 2.7.9 OK.
  cups-devel CUPS-devel-Common Unix Printing System development files CONDITIONS
  RED - 2.0.2 OK-
  sane SANE - library scanning CONDITIONS
  RED - 1.0.24 OK-

  ---------------
  | COMPILEDEP |
  ---------------

  services of building support of the library of libtool libtool - CONDITIONS
  RED - 2.4.2 OK-
  C of the CONDITIONS of the C++, GCC GCC compiler and GNU project-
  RED - 4.9.2 OK-
  make - GNU make utility to maintain groups of programs CONDITIONS
  RED 3.0 4.0 OK.

  ----------------------
  | Python extensions.
  ----------------------

  cupsext CONDITIONS of CUTS-Extension
  RED - 3.15.7 OK-
  hpmudext CONDITIONS of IO-Extension
  RED - 3.15.7 OK-

  -----------------------
  | Analyze the Configuration |
  -----------------------

  scanext scan-SANE-Extension CONDITIONS
  RED - 3.15.7 OK-
  hpaio CONDITIONS of HPLIP-SANE-Backend
  RED - 3.15.7 OK ' hpaio found in /etc/sane.d/dll.co
  NF'

  -----------------------
  | Other dependencies.
  -----------------------

  ------------------------------
  | DISCOVERY SCANNER DEVICES |
  ------------------------------

  Not find scanner.

  --------------------------
  | DISCOVERY USB DEVICES |
  --------------------------

  No devices found.

  ---------------------------------
  | THE INSTALLED CUPS PRINT QUEUES.
  ---------------------------------

  HP_Deskjet_3520_series
  ----------------------
  Type: unknown
  The device URI: dnssd://Deskjet%203520%20series%20%5B5DEC84%5D._ipp._tcp.l ALCO /? UUID = 1c852a4
  d-b800-1f08-abcd-28924a5dec84
  PPD: /etc/cups/ppd/HP_Deskjet_3520_series.ppd
  Description of PPD: HP Deskjet 3520 Series, hpcups 3.15.7
  Status of the printer: printer HP_Deskjet_3520_series is inactive. enabled since Thursday, August 27, 2015 1
  1:36:20 AM EDT
  WARNING: printer is not installed for HPLIP. Printers must use the hp: hpfax or: CUPS backen
  d for HP devices.

  --------------
  | AUTHORIZATION |
  --------------

  -----------
  | SUMMARY |
  -----------

  Missing required dependencies
  -----------------------------
  None

  Lack of optional dependencies
  -----------------------------
  None

  Total errors: 0
  Total warnings: 1

  Fact.
  Arnett@Arnett-Latitude-D510: ~ $

  -----------------------------------------------------------------------------------------------------------------------------------------

  I removed the Panel of system tray and reinstalled. HPLIP loaded correctly. I then ran hp-setup the terminal 192.168.1.117. The printer will now appear in HPLIP.

  HP-check - t now reports:

  Arnett@Arnett-Latitude-D510: ~ $ hp-check - t
  Save the output in the log file: /home/arnett/hp-check.log

  HP Linux Imaging and Printing System (ver. 3.15.7)
  Dependency/Version Check Utility worm. 15.1

  Copyright (c) 2001-15 Hewlett-Packard Development Company, LP
  This software comes WITHOUT ANY WARRANTY.
  It is free software, and you are welcome to distribute
  under certain conditions. See the COPY of the file for more details.

  Note: hp-check can be run in three modes:
  1. check mode (-c or - compilation) compilation: use this mode before compiling the HPLIP
  provided source tarball (. tar.gz or .run) to determine if the appropriate dependencies are installed
  to compile successfully HPLIP.
  2. performance check (r or - run) mode: use this mode to determine if a distribution provided
  package (.deb, .rpm, etc.) or an already built provided HPLIP tarball has the right
  dependencies, installed to run successfully.
  3. the two and run-compilation mode check (b or - both) (by default): this mode will check
  the two cases above (the two dependencies of compilation and execution).

  Types of audit:
  a. EXTERNALDEP - external dependencies
  b. GENERALDEP - General dependencies (required for the compilation and execution)
  c. COMPILEDEP - compile time dependencies
  d. [all are running controls]
  PYEXT SCANCONF AUTHORIZATION OF QUEUES

  Types of status:
  Ok
  LACK - dependence or missing or plug-in authorization
  SE - dependence-Incompatible version or Plugin-version

  ---------------
  | SYSTEM INFO |
  ---------------

  Kernel: 3.19.0 - 26-generic #28 - Ubuntu SMP Tue August 11 at 14:16:45 UTC 2015 GNU/Linux
  Host: arnett-Latitude-D510
  Proc: 3.19.0 - 26-generic #28 - Ubuntu SMP Tue August 11 at 14:16:45 UTC 2015 GNU/Linux
  Distribution: ubuntu 15.04
  Number of bits: 32-bit

  -----------------------
  | HPLIP CONFIGURATION |
  -----------------------

  HPLIP-Version: HPLIP 3.15.7
  HPLIP-homepage: / usr/share/hplip
  HPLIP-Installation: Automatic Installation is supported for the version of 15.04 distro ubuntu

  Current content of ' / etc/hp/hplip.conf' file:
  # hplip.conf. From the hplip.conf.in to configure.

  [hplip]
  version = 3.15.7

  [directories]
  Home = / usr/share/hplip
  Run = / var /.
  PPD = / usr/share/ppd/HP
  ppdbase = / usr/share/ppd
  doc=/usr/share/doc/hplip-3.15.7
  HTML=/usr/share/doc/hplip-3.15.7
  icon = / usr/share/applications
  cupsbackend = / usr/lib/CUPS/backend
  cupsfilter = / usr/lib/cups/filter
  DRV = / usr/share/cups/drv/hp
  bin = / usr/bin

  # Following values are determined to set the time and cannot be changed.
  [configure]
  network-build = yes
  libusb01-construction = no
  pp-build = no
  GUI-build = yes
  Scanner-build = yes
  Fax-build = yes
  dbus-build = yes
  cups11-construction = no
  doc-build = yes
  shadow-build = no
  HPIJS-install = no
  Foomatic-drv-install = no
  Foomatic-ppd-install = no
  Foomatic-rip-hplip-install = no
  hpcups-install = yes
  cups-drv-install = yes
  cups-ppd-install = no
  internal-tag = 3.15.7
  limited build = no
  UI-toolkit = qt4
  Qt3 = No.
  Qt4 = yes
  policy-kit = no
  Lite-build = no
  udev_sysfs_rules = no
  hpcups-only-build = no
  HPIJS-only-build = no

  Current content of ' / var/lib/hp/hplip.state' file:
  Plugins are not installed. Could not access file: no such file or directory

  Current content of ' ~ /.hplip/hplip.conf' file:
  [installation]
  Date_Time = 28/08/2015-13:49:35
  version = 3.15.7

  [update]
  notify_upgrade = true
  last_upgraded_time = 1440525280
  pending_upgrade_time = 0

  [Settings]
  systray_visible = 0
  systray_messages = 0

  [last_used]
  device_uri = hp:/net/Deskjet_3520_series?ip=192.168.1.117
  printer_name =
  working_dir =.

  [orders]
  Scan = / usr/bin/xsane v % SANE_URI %

  [update]
  rate = 30
  enable = false
  Type = 1

  [survey]
  enable = false
  interval = 5
  device_list =

  [fax]
  voice_phone =
  Email_Address =

  <>
  Version >

  --------------------------
  | External dependencies.
  --------------------------

  GS GhostScript - interpreter PostScript and PDF and previewe
  r 7.05 REQUIRED 9.15 OK-
  scanimage, scanimage - Shell digitization program OPTIO
  NAL 1.0 1.0.24 OK.
  xsane xsane - scanner Graphical frontend for SANE OPTIO
  NAL 0.998 0.9 OK.
  cups, CUPS - Common Unix Printing System CONDITIONS
  1.1 2.0.2 RED OK "CUPS Scheduler runs."
  PolicyKit to PolicyKit - administrative policy framework OPTIO
  NAL - 0,105 OK-
  network network - wget OPTIO
  NAL - THE 1.16.1 OK-
  OPTIO avahi-utils avahi-utils
  NAL - 0.6.31 OK-
  dbus DBus - Message CONDITIONS bus system
  RED - 1.8.12 OK-

  -------------------------
  | General dependencies.
  -------------------------

  libcrypto libcrypto - cryptographic library OpenSSL CONDITIONS
  RED - 1.0.1 OK-
  Python-dbus Python DBus - Python bindings for DBus REQUIRED
  0.80.0 1.2.0 OK RED-
  Reportlab - OPTIO Python PDF Library ReportLab
  NAL 2.0 3.1.44 OK.
  Python-notify Python libnotify - Python bindings for libnotify notif Office
  OPTIONAL wing - OK-
  PyQt 4 interface - Qt PyQt4 for Python (for the version of Qt 4.x) CONDITIONS
  4.0 RED 4.11.3 OK.
  Python-xml libraries Python XML CONDITIONS
  RED - 2.1.0 OK-
  libusb libusb - USB CONDITIONS library
  RED - 1.0 OK-
  CUPS cups-images - TERMS of image development files CUPS
  RED - 2.0.2 OK-
  libnetsnmp libnetsnmp-devel-devel - SNMP networking of development of the library of the CONDITIONS files
  5.0.9 RED 5.7.2 OK-
  SANE sane-devel - digitization of library CONDITIONS development files
  RED - 1.0.24 OK-
  PIL PIL - Python Imaging Library (required for command-line scan wi
  HP e-scan) OPTIONAL - 1.1.7 OK.
  python2X Python 2.2 or higher - programming Python CONDITIONS language
  RED 2.2 2.7.9 OK.
  PyQt4-dbus PyQt 4 DBus - DBus for PyQt4 CONDITIONS Support
  4.0 RED 4.11.3 OK.
  libjpeg libjpeg - JPEG CONDITIONS library
  RED - OK-
  libpthread libpthread - POSIX threads library CONDITIONS
  RED - 2.21 OK-
  python-devel Python-devel - Python CONDITIONS development files
  RED 2.2 2.7.9 OK.
  cups-devel CUPS-devel-Common Unix Printing System development files CONDITIONS
  RED - 2.0.2 OK-
  sane SANE - library scanning CONDITIONS
  RED - 1.0.24 OK-

  ---------------
  | COMPILEDEP |
  ---------------

  services of building support of the library of libtool libtool - CONDITIONS
  RED - 2.4.2 OK-
  C of the CONDITIONS of the C++, GCC GCC compiler and GNU project-
  RED - 4.9.2 OK-
  make - GNU make utility to maintain groups of programs CONDITIONS
  RED 3.0 4.0 OK.

  ----------------------
  | Python extensions.
  ----------------------

  cupsext CONDITIONS of CUTS-Extension
  RED - 3.15.7 OK-
  hpmudext CONDITIONS of IO-Extension
  RED - 3.15.7 OK-

  -----------------------
  | Analyze the Configuration |
  -----------------------

  scanext scan-SANE-Extension CONDITIONS
  RED - 3.15.7 OK-
  hpaio CONDITIONS of HPLIP-SANE-Backend
  RED - 3.15.7 OK ' hpaio found in /etc/sane.d/dll.co
  NF'

  -----------------------
  | Other dependencies.
  -----------------------

  ------------------------------
  | DISCOVERY SCANNER DEVICES |
  ------------------------------

  Not find scanner.

  --------------------------
  | DISCOVERY USB DEVICES |
  --------------------------

  No devices found.

  ---------------------------------
  | THE INSTALLED CUPS PRINT QUEUES.
  ---------------------------------

  HP_Deskjet_3520_series
  ----------------------
  Type: unknown
  The device URI: dnssd://Deskjet%203520%20series%20%5B5DEC84%5D._ipp._tcp.l ALCO /? UUID = 1c852a4
  d-b800-1f08-abcd-28924a5dec84
  PPD: /etc/cups/ppd/HP_Deskjet_3520_series.ppd
  Description of PPD: HP Deskjet 3520 Series, hpcups 3.15.7
  Status of the printer: printer HP_Deskjet_3520_series is inactive. activated since Friday, August 28, 2015 0
  19:04:42 CEST
  WARNING: printer is not installed for HPLIP. Printers must use the hp: hpfax or: CUPS backen
  d for HP devices.

  --------------
  | AUTHORIZATION |
  --------------

  -----------
  | SUMMARY |
  -----------

  Missing required dependencies
  -----------------------------
  None

  Lack of optional dependencies
  -----------------------------
  None

  Total errors: 0
  Total warnings: 1

  Fact.
  Arnett@Arnett-Latitude-D510: ~ $

  After the system restarts, HPLIP load in the system tray. Although the printer is installed and configured in the KDE system settings, it does not show in HPLIP or Manager HPLIP of devices. Why doesn't the HPLIP printer?

  I found a few things to check to make sure that HPLIP works well.  First of all, remove all printers which has not setup failed.  Also, make sure that the HP printer didn't need to be redefined to allow wireless communication.  Then make sure that the installation routine performs through the configuration of the wireless connection.  It should work reliably after that.  Do some tests, then resart your computer and scan something else.  I used playing cards...

• Wireless for HP OfficeJet 6500 a configuration more all-in-One on Ubuntu 10.04

  I bought a HP OfficeJet 6500 has more all-in-One CN557A, I want to use with ubuntu 10.04 64 bits as a wireless network printer.
  Before, I bought, I checked the compatibility on www.hplipopensource.org and www.openprinting.org, and everything was in order.
  The machine is detected automatically and fully functional when connected with a usb cable, but I failed to operate as a wireless printer.
  That's what I did:

  I configured the printer on the network (through the interface of the printer), and it connects. It prints a 'Wireless Network Test report', and everything works. I can ping the local ip address and access it via the browser. HP eprint also works.

  I installed hplip 3.11.10 and dependencies manually. I did this because the default hplip in ubuntu 10.04 did not recognize the device.

  I ran 'hp-check', who gave without errors or warnings:

  tjoff@MEK-403-jakbo-01: ~ $ hp-check

  HP Linux Imaging and Printing System (ver. 3.11.10)
  Dependency/Version Check Utility worm. 14.3

  Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
  This software comes WITHOUT ANY WARRANTY.
  It is free software, and you are welcome to distribute
  under certain conditions. See the COPY of the file for more details.

  Note: hp-check can be run in three modes:
  1. check mode (-c or - compilation) compilation: use this mode before compiling the
  HPLIP provided source tarball (. tar.gz or .run) to determine if the appropriate dependencies
  are installed to compile correctly HPLIP.
  2. performance check (r or - run) mode: use this mode to determine if a distribution
  provided package (.deb, .rpm, etc.) or a supplied HPLIP tarball already built
  the appropriate dependencies installed to run successfully.
  3. the two and run-compilation mode check (b or - both) (by default): this mode
  check the two cases above (the two dependencies of compilation and execution).

  Save the output in the log file: hp - check.log

  During initialization. Please wait...

  ---------------
  | SYSTEM INFO |
  ---------------

  Base information system:
  78 - Ubuntu Linux 2.6.32 mek-403-jakbo-01-35-generic # SMP kills Sep 11 16:11:24 UTC 2011 x86_64 GNU/Linux

  Distribution:
  Ubuntu 10.04

  Checking version of Python...
  OK, installed the version 2.6.5

  Checking for version 4.x PyQt...
  OK, version 4.7.2 installed.

  Checking the CUPS...
  Status: Scheduler is running
  Version: 1.4.3
  error_log is defined at the level: warning

  Checking the dbus/python-dbus...
  dbus daemon is running.
  Python-dbus version: 0.83.0

  ------------------------------------
  | COMPILATION AND RUNTIME DEPENDENCIES.
  ------------------------------------

  Note: to check the dependencies only compilation, run hp - check with the parameter - c (IE, hp-check - c).
  Note: to check the dependencies only run time, run hp - check with the parameter-r (IE, hp-check - r).

  Dependency checking: CUPS - Common Unix Printing System...
  OK, found.

  Dependency checking: CUPS devel - development Common Unix Printing System files...
  OK, found.

  Dependency checking: CUPS image - development for the CUPS image files...
  OK, found.

  Dependency checking: DBus - Message bus system...
  OK, found.

  Dependency checking: gcc - the GNU Project C and C++ compiler...
  OK, found.

  Dependency checking: GhostScript - PostScript and PDF interpreter and preview generator...
  OK, found.

  Dependency checking: libcrypto - OpenSSL cryptographic library...
  OK, found.

  Dependency checking: libjpeg - JPEG library...
  OK, found.

  Dependency checking: libnetsnmp-devel - SNMP networking of development libraries files...
  OK, found.

  Dependency checking: libpthread - POSIX threads library...
  OK, found.

  Dependency checking: libtool - building of the library support services...
  OK, found.

  Dependency checking: libusb - Library USB...
  OK, found.

  Dependency checking: make - GNU make utility to maintain groups of programs...
  OK, found.

  Dependency checking: PIL - Python Imaging Library (mandatory for the commandline scanner with hp-scan)...
  OK, found.

  Dependency checking: PolicyKit - administrative framework...
  OK, found.

  Dependency checking: PyQt 4 DBus - Support of DBus for PyQt4.
  OK, found.

  Verification of dependency: Python-DBus - Python bindings for DBus...
  OK, found.

  Verification of dependency: Python-devel - development Python files...
  OK, found.

  Verification of dependency: Python libnotify - Python bindings for libnotify desktop notifications...
  OK, found.

  Verification of dependency: Python XML libraries...
  OK, found.

  Verification of dependency: Python 2.3 or above - for the fax function...
  OK, found.

  Verification of dependency: Python 2.2 or higher - Python programming language...
  OK, found.

  Dependency checking: Reportlab - library for Python PDF...
  OK, found.

  Dependency checking: SANE - library digitization...
  OK, found.

  Dependency checking: SANE - sweep of development libraries files...
  OK, found.

  Dependency checking: scanimage - Shell program scanning...
  OK, found.

  Dependency checking: xsane - scanner Graphical frontend for SANE...
  OK, found.

  ----------------------
  | HPLIP INSTALLATION |
  ----------------------

  HPLIP currently installed version...
  HPLIP 3.11.10 currently installed in ' / usr/share/hplip.

  Current content of ' / etc/hp/hplip.conf' file:
  # hplip.conf. From the hplip.conf.in to configure.

  [hplip]
  version = 3.11.10

  [directories]
  Home = / usr/share/hplip
  Run = / var /.
  PPD = / usr/share/ppd/HP
  ppdbase = / usr/share/ppd
  doc=/usr/share/doc/hplip-3.11.10
  icon = / usr/share/applications
  cupsbackend = / usr/lib/CUPS/backend
  cupsfilter = / usr/lib/cups/filter
  DRV = / usr/share/cups/drv/hp

  # Following values are determined to set the time and cannot be changed.
  [configure]
  network-build = yes
  pp-build = no
  GUI-build = yes
  Scanner-build = yes
  Fax-build = yes
  dbus-build = yes
  cups11-construction = no
  doc-build = yes
  shadow-build = no
  HPIJS-install = no
  Foomatic-drv-install = no
  Foomatic-ppd-install = no
  Foomatic-rip-hplip-install = no
  hpcups-install = yes
  cups-drv-install = yes
  cups-ppd-install = no
  internal-tag = 3.11.10
  limited build = no
  UI-toolkit = qt4
  Qt3 = No.
  Qt4 = yes
  policy-kit = no
  HPIJS-only-build = no
  Lite-build = no
  udev-acl-rules = yes
  hpcups-only-build = no
  HPIJS-only-build = no

  Current content of ' / var/lib/hp/hplip.state' file:
  # hplip.state - runtime HPLIP persistent variables.

  [plugin]
  installed = 0
  EULA = 0

  Current content of ' ~ /.hplip/hplip.conf' file:
  [last_used]
  printer_name =
  working_dir =.
  device_uri = "hp: / usb/Officejet_6500_E710n-z? serial = CN16F2402Q05JW.

  [orders]
  Scan = / usr/bin/xsane v % SANE_URI %

  [installation]
  version = 3.11.10
  Date_Time = 2011-11-16 14:30:35

  [Settings]
  systray_messages = 0
  systray_visible = 0

  [fax]
  Email_Address =
  voice_phone =

  [update]
  rate = 30
  enable = false
  Type = 1

  [survey]
  enable = false
  device_list =
  interval = 5

  --------------------------
  | DISCOVERY USB DEVICES |
  --------------------------

  Device URI scheme
  -------------------------------- -------------------------
  HP: / usb/Officejet_6500_E710n-z? s HP Officejet 6500 E710n-z
  Erial = CN16F2402Q05JW

  ---------------------------------
  | THE INSTALLED CUPS PRINT QUEUES.
  ---------------------------------

  B-403-271-A4-COLOR2
  -------------------
  Type: unknown
  Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-Color

  B403-271-A4-BW
  --------------
  Type: unknown
  Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-BW

  HP-Officejet-6500-E710n-z-FAX
  -----------------------------
  Type: printer
  The URI of the device: hp: / usb/Officejet_6500_E710n-z? series = CN16F2402Q05JW
  PPD: /etc/cups/ppd/HP-Officejet-6500-E710n-z-FAX.ppd
  Description of PPD: HP Officejet 6500 e710n-z, hpcups 3.11.10
  Status of the printer: printer HP-Officejet-6500-E710n-z-FAX is inactive. activated in 2011-11-16 T 01: 00:45 THIS
  Communication situation: good

  ----------------------
  | SANE CONFIGURATION |
  ----------------------

  'hpaio' in ' / etc/sane.d/dll.conf'...
  OK, found. SANE backend "hpaio" is properly set up.

  Check the output of ' scanimage-L '...
  device ' hpaio: / usb/Officejet_6500_E710n-z? serial = CN16F2402Q05JW' is an all-in-one HP Officejet_6500_E710n-z

  ---------------------
  | THE PYTHON EXTENSIONS.
  ---------------------

  Checking the 'cupsext' extension of CUPS...
  OK, found.

  The 'pcardext' Photocard extension checking...
  OK, found.

  Checking extension 'hpmudext' I/O...
  OK, found.

  Checking the 'scanext' extension of healthy MIND scan...
  OK, found.

  -----------------
  | CONFIGURATION OF E/S USB |
  -----------------

  Checking the permissions of attached USB printers...

  For this device HP 0 x 5412 002:005:
  The URI of the device: hp: / usb/Officejet_6500_E710n-z? series = CN16F2402Q05JW
  Device node: / dev/bus/usb/002/005
  Mode: 0664

  ---------------
  | USER GROUPS |
  ---------------

  LP ADM dialout cdrom plugdev lpadmin admin sambashare vboxusers

  -----------
  | SUMMARY |
  -----------

  Without errors or warnings.

  Fact.

  I then ran "sudo hp-setup", chose the device (which has been detected), has chosen my wireless network, enter the wireless security key. On the results of configuration window, I get two messages:
  "Your printer has been correctly configured on the wireless network. You can now unplug the USB cable.
  and
  "The Ethernet cable is plugged to prevent you to connect to a wireless network. For a wireless connection, remove the cable and try again. (VSA000) »
  There is no ethernet cable connected, so I can't remove it. I unplug the USB cable and click on "Finish". What makes the "hp-setup" - beginning of dialogue even more and the printer has not been installed.
  In the terminal, I have the following:

  tjoff@MEK-403-jakbo-01: ~ $ sudo hp-setup
  [sudo] password for tjoff:

  HP Linux Imaging and Printing System (ver. 3.11.10)
  Printer/Fax Setup Utility version 9.0

  Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
  This software comes WITHOUT ANY WARRANTY.
  It is free software, and you are welcome to distribute
  under certain conditions. See the COPY of the file for more details.

  Research on USB bus...
  GET/HTTP/1.1 IoMgmt/Adapters
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  GET/IoMgmt/Adapters/Wifi0/WifiNetworks HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  GET/IoMgmt/Adapters/Wifi0/Profiles/Active HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  GET/IoMgmt/Adapters/Wifi0/Protocols HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  error: missing answer key: ' iorotocols-iorotocol - dd:dnsserveripaddress - 0'
  GET /IoMgmt/Adapters/Wifi0/VsaCodes.xml HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  GET/IoMgmt/Adapters/Wifi0/WifiNetworks/SSID = mVnmXfsu HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  GET /IoMgmt/IoConfig.xml HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  I then tried to reconnect the printer usb cable and run "hp-toolbox" and click on "Configuration without wireless/wifi via a USB port. Now, I get the error:

  tjoff@MEK-403-jakbo-01: ~ $ hp-toolbox

  HP Linux Imaging and Printing System (ver. 3.11.10)
  HP worm Device Manager. 15.0

  Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
  This software comes WITHOUT ANY WARRANTY.
  It is free software, and you are welcome to distribute
  under certain conditions. See the COPY of the file for more details.

  HP Linux Imaging and Printing System (ver. 3.11.10)
  WiFi Configuration Utility version 1.1

  Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
  This software comes WITHOUT ANY WARRANTY.
  It is free software, and you are welcome to distribute
  under certain conditions. See the COPY of the file for more details.

  error: error writing channel
  error: an i/o error has occurred. Please check the USB connection to your printer and try again. (I/O device error)

  Fact.

  I do not understand how after this point, and any help is welcome.

  A friendly soul on ubuntuforums pointed out, that the wireless configuration is necessary only if the printer is NOT connected to a local area network (W). So everything what I should really do is to configure the printer on the page Administration of CUPS, and it worked. Problem solved. Ridicule me.

• Java plug-in for Eclipse or BB JDE BB

  Hello developers BB!

  I am really new to the BlackBerry development world as you will see.

  I started to read some of the tutorials and there is something that I'm not sure. What is the difference between BlackBerry Java plug-in for Eclipse and the BlackBerry JDE? Which one should I use to develop my applications?

  I'll take this opportunity to ask, is there a graphical development environment to develop applications? or do I have this code? I ask this question to the General knowledge.

  Thanks in advance for your time and help.

  Best regards.

  You should encode everything, there is no GUI Builder. Eclipse is the way to go, JDE is removed out sooner than later.

• BlackBerry Java SDK v6.0 does not work with Eclipse v3.6

  How blackberry trying to compete with the other smartphone when it come to applications when the tools cannot anti same compatible with the latest version out there like Eclipse 3.6 or their plug-in for Visual Studio 2010.

  As a programmer I'm really disappointed in a business this way this long to release an SDK to the developer and not even are ready to be used with the latest tools.

  RIM has never been the fastest when it comes to development tools.

  A great tool that many people want is the GUI Builder, he announced last December, said he would come out mid-2010 (so ~ June) and we are still waiting.

  As annoying as it is, we are simply working around him, when it comes to our development time reduction but we still have options if the tool does not work or you don't like how it works.

• Implementation of the updated code without having to restart the Simulator?

  I use Eclipse 3.5.1 with the plug-in of the BlackBerry Java 1.1.1 with the BlackBerry Java SDK 5.0.0.14.

  Running the BlackBerry Simulator works very well. However when I update my code and try to run or debug him again once I get the following error:

  "BlackBerry debugging session is already active. BlackBerry that a debugging session can be active at a given time. »

  If I close the Simulator, then I can run the updated as expected in a new Simulator code. However this slows me down because I have to wait 60 + seconds for the Simulator load to make my updated code can run.

  Is it possible to update the currently running program without restarting the Simulator?

  Debugs faster with a physical device?

  Thank you

  Drew

  No, at the 2009 BlackBerry Developer Conference they have demonstrated that the code of Hot-Swap, GUI Builder and cross-platform support using Eclipse and says that these features would come out of 2010 (from what I remember; GUI Builder-early 2010 but in another post, one of the devs RIM said they aim for mid-2010, Hot-Swap and cross-platform would be mid-2010). Patience and it will come... wish just time would go faster.

• Impossible to install JDEV 12.1.3 on Mac

  The installation goes very well on mac Yosemite 10.10.5

  but at the launch of the jdev he throws more excetiopn

  Warning - could not install some modules:

  Profiler Java (common) - none of the modules providing the org.netbeans.lib.profiler.common.Profiler capacity could be installed.

  Actions - the module named oracle.ide bridge was needed and not found.

  Cache - module named oracle.ide extensions was needed and not found.

  JDeveloper/NetBeans bridge - module named oracle.ide was needed and not found.

  GUI Builder to JDev - module named oracle.ide.library was needed and not found.

  GUI Builder to JDev - module named oracle.javamodel_rt was needed and not found.

  GUI Builder to JDev - module named oracle.javatools_nodeps was needed and not found.

  GUI Builder to JDev - module named oracle.ide was needed and not found.

  GUI Builder to JDev - module named oracle.jdeveloper.java.core was needed and not found.

  JDev projects via NB API - module named oracle.ide.library was needed and not found.

  JDev projects via NB API - module named oracle.javatools_nodeps was needed and not found.

  JDev projects via NB API - module named oracle.ide was needed and not found.

  Profiler Impl - module named oracle.jdeveloper.runner was needed and not found.

  Profiler Impl - module named oracle.ide.library was needed and not found.

  Profiler Impl - module named oracle.javamodel_rt was needed and not found.

  Profiler Impl - module named oracle.ide.runner was needed and not found.

  Profiler Impl - module named oracle.javatools_nodeps was needed and not found.

  Profiler Impl - module named oracle.ide was needed and not found.

  Profiler Impl - module named oracle.jdeveloper.java.core was needed and not found.

  Master + URL FileSystem - module named oracle.ide was needed and not found.

  5 additional modules could not be installed because of the above problems.

  Please notify

  found the problem, it is with the help of java 1.8 1.7 rather

• JDeveloper starts does not after MAF 2.1 update

  Hello

  12.1.3 JDeveloper / MAF 2.1 / Windows 7 Prof 64 bit / JDK 1.7

  I just updated the MAF from JDeveloper extension (Help - Check for Updates).

  I had earlier version 2.0 of the MAF and it worked very well.

  After this 2.1 update, I was not able to start the JDeveloper. The update succeeded.

  It gives me error when I try to open up JDeveloper below.

  I also tried to remove the "system12.1.3.0.41.140521.1008" folder, but it is still not start.

  I've seen other posts in this forum but some developers could start JDeveloper after the update.

  Can you get it someone please let me know if there is a way to solve this problem?

  Does JDK1.8? I still have my JDeveloper running on 1.7

  Error

  ------

  Warning - could not install some modules:

  Master + URL FileSystem - module named oracle.ide was needed and not found.

  Cache - module named oracle.ide extensions was needed and not found.

  Profiler Java (common) - none of the modules providing the org.netbeans.lib.profiler.common.Profiler capacity could be installed.

  JDeveloper/NetBeans bridge - module named oracle.ide was needed and not found.

  Actions - the module named oracle.ide bridge was needed and not found.

  Profiler Impl - module named oracle.ide.runner was needed and not found.

  Profiler Impl - module named oracle.ide was needed and not found.

  Profiler Impl - module named oracle.jdeveloper.runner was needed and not found.

  JDev projects via NB API - module named oracle.ide was needed and not found.

  GUI Builder to JDev - module named oracle.ide was needed and not found.

  3 additional modules could not be installed because of the above problems.

  Thanks for any help.

  Sameer

  Not exactly what goes wrong with your installation.

  In general JDeveloper 12.1.3 must be started with JDK 1.7

  You must also have 1.8 JDK on your machine, and the extension of the MAF will need to know its installed location.

  I suggest that you remove the system12.1.3 directory, and then re - install JDeveloper in a new location.

  When you install JDeveloper, if you use the installer of pot, make sure that start you with JDK 1.7.

  (Should be fine if install you using the exe file).

• The main program is seen as a separate thread?

  I tried to stop a GUI based program opening too fast because the splash screen has not been seen for a long time enough.
  
  So I tried to use the classes Thread and can be walked in the GUI Builder.
  Trying different things, I got it to do what I wanted: a delay of 10 seconds before the GUI of the program display.
  But I don't understand why main is not considered a separate thread and continue to get visible regardless of the status of delayThread.
  

  // Constructor:
  // ---------------
  public Hotel (int numberIn)
      {
           // Create the time delay thread so that users may enjoy the splash !
           delayThread = new Thread(this);
           delayThread.run();
           // Initialise the number of rooms and the GuestList :        
          noOfRooms =  numberIn;
          guests  = new GuestList(noOfRooms); 
          // Graphics settings:      
          setTitle("Hotel");     
          setLayout(new FlowLayout());
         // etc. etc.
         // etc. etc.
         setVisible(true);
     }
  
  
      // A run method to delay the program opening:
       
      public void run()
      {     
           try
           {
                delayThread.sleep(10000);
           }
           catch(InterruptedException ie)
           {
                ie.printStackTrace();
           }
         
      }

  Now, maybe a better way to do would be to go the setVisible of the manufacturer, the run method statement.
  Maybe there's something even better to produce a delay in the opening of the program.
  But I'm still curious why the main thread has been delayed by a delay in what is really a completely separate topic.
  Any ideas?
  
  Published by: KonTiki on February 16, 2013 13:10
  
  Published by: KonTiki on February 16, 2013 13:19
  
  Published by: KonTiki on February 16, 2013 13:20
  
  Published by: KonTiki on February 16, 2013 13:21
  
  Published by: KonTiki on February 17, 2013 09:16

  Are you sure that show you all the relevant code? I think that, as is the case, the thread in sleep does nothing.

• Installation of command line for plugins

  The way documented to install plugins Apex 4.0 is to use the GUI Builder.
  
  Is it possible to install a plugin by running a SQL file similar to the way a full application export produces a SQL file that can be used to install the application in a different database?
  
  Thank you

  Hello

  in fact, you should be able to do this with an application, you can export file. You can use the new package wwv_flow_application_install to change the workspace, the application id, and you may need to change the offset id so if you install it in many applications. See http://joelkallman.blogspot.com/2010/07/apexapplicationinstall.html for more details on this package.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins

• reports of the compiler for R12.0.4 EBS and EBS R12.1

  Hi you
  
  EBS R12.1
  EBS R12.0.4
  RHEL 4.6
  
  Is the version for R12.0.4 and the same version R12.1 reports? Is that he reports 10g?
  
  When you find the directory bin/executable by the compiler in level Apps? (e.g. f60gen)
  
  
  Thank you very much
  
  
  Ms. K

  Hello

  6. run the GUI Builder (that's what I ask ;) I forgot the name and the path bin, because it don't do it often)

  Please refer to the same document referenced above, you will find the answer under the section "Section 3: Running the reports Builder"- rwbuilder.sh

  So tell me again, what the 'bin' path where the exe of reports?

  Source file env and question "cd $ORACLE_HOME/bin.

  Again, it's in the same document, you will find the answer under the section ' Section 6: compilation of reports "- rwconverter.sh

  Please read the document.

  Thank you
  Hussein