H9-1080uk new for ME - no sound

Hello

I just bought a 1080uk h9 for ME (Windows 7 64-bit) and set up, everything works fine, but I'm having a problem with the audio.

I don't have speakers, I tried to update the sound card drivers, followed all the help Windows and HP files, made so that it is not silent, and the full volume, checked the audio device by default and tried about everything I know to solve the problem, but I still have no sound with or without a helmet.

I keep thinking I missed something stupid, but I really can't think of anything I can do to solve the problem.

Any help or advice would be much appreciated. This is my last resort before calling HP or restart my computer.

Thank you

Hello

Most speakers have nothing to do with the headphones does not.

Try a well known set of helmet

Tags: HP Desktops

Similar Questions

  • New iPhone SE no sound from the speaker of the brand

    I just bought a new iPhone SE and I'm getting no sound from the speaker. Does anyone have any ideas on a possible resolution?

    I restored from an iPhone 5 to the top, both phones are on the latest version of iOS.

    Once the synchronization is complete, I ejected the phone correctly. But there is no sound coming from the speaker:

    • Key "secret" in both positions, no sound from the speaker
    • The top volume, using the volume buttons and the sound, no sound from the speaker settings
    • Headset plugged in, sound comes from the helmet, remove them, the iPhone recognizes, but still no sound
    • I tried the music app, ringtone from another phone, videos, podcast app, no sound from the speaker
    • Past the phone power off & on again, no sound speaker
    • Reset iPhone (hold both buttons down for 10 seconds), no speaker sound
    • Reset iPhone settings, no speaker sound

    I begin to suspect it is a hardware problem, but as I am not near the Apple Store, I would try as much as I can before you go this route.

    Thank you

    Hello Andy,

    Thank you for using communities of Apple Support.

    I understand that you have restored your iPhone backup iPhone a precedent, and now there is no sound from the speaker.  Given the troubleshooting you have already done your next step is to restore the factory settings to see if the problem persists:

    Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

    If the problem persists, then please make an appointment with the Apple Store is close.

    http://www.Apple.com/retail/Geniusbar/

    Take care.

  • Help to new primary hard drive sounds: HP Pavilion 6620f PC

    I'm a non-technical guy who just replaced the main OEM 1 TB drive with a VelociRaptor 300 GB 10000 RPM hard drive. The installation went well, thanks to the fantastic instructions of the manual of HP and it works fine. Hard Disk Sentinel (free version) tells me that his condition is "perfect."

    Here's my question:

    • the new drive is intermittent but constant and subtle sounds and I don't remember hear them before.
    • Is there a problem or is it only a function of another type of hard drive?

    For any help or suggestion accepted with gratitude! I hope that I worry about anything, but do not have the technical expertise or experience to know!

    Thank you

    Linda

    Hi Linda,.

    Hard disks have different acoustic characteristics according to the manufacturers (and in overall models from the same manufacturer).  In addition, you went with a 1 TB of HARD drive that probably have a rotational speed of 5400 RPM on a faster drive.  If you are hearing just weak 'rattling', I think it's perfectly normal and given the utility disk HARD sees no problem with the drive, I would say that everything is fine.

    Best regards

    DP - K

  • Flash air app for IOS. Sound problem

    HI, I made a flash app for IOS. This flash content video. Video of the work correctly in the Simulator. I have the video work´s iPhone, but the sound is not.  Please I need solve this problem as soon as possible. Thank you in advace

    I found the solution with webView.dispose () and his works. Im going to test your solution as well. Thanks for your help

    import flash.geom.Rectangle;

    import flash.media.StageWebView;

    import flash.filesystem.File;

    import flash.utils.Timer;

    import flash.events.TimerEvent;

    Stop();

    button_1.addEventListener (MouseEvent.CLICK, fl_ClickToGoToWebPage);

    function fl_ClickToGoToWebPage(event:MouseEvent):void

    {

    var webView:StageWebView = new StageWebView();

    webView.stage = this.stage;

    webView.viewPort = new Rectangle (285,265,640,480);

    var fPath:String = new queue (new File("app:/kk.mp4").nativePath) .url;

    webView.loadURL (f)

    hh.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame);

    function fl_ClickToGoToAndStopAtFrame(event:MouseEvent):void

    {

    webView.dispose)

    };

    }

  • iCloud won't let me upgrade to my new email address on my new iphone 6s, the sound by using an old email which is no longer active and won't let me delete or change.

    How can I change my email and id on icloud on my new iphone 6s

    Welcome dipete,

    Thanks for posting in the communities of Support from Apple. I see that you have changed the e-mail address on your Apple ID and your phone has the former account listed and does not let you change to the new. I know how it is important for the correct account on your phone. I'll be more than happy to help.

    Take a look at this article, I'll help you get the switch over.

    If iCloud asks you the password to your Apple ID - Apple Support previous

    Take care!

  • Update for IOS 10 sound quality is mediocre with headphones

    Hello

    I just want to see if other people have noticed that since updating to the new iOS on my iPhone 6 s 10 more my sound quality while listening to music via apple earpods was really the food but now its like im using earphones shop book and listening to an old cassette player - so low can hear barely im not impressed.

    I feel the same way. I use a Bluetooth headset and I notice, too, that the sound quality has gone downhill.

  • Edit as new for messages with attachments sends the contents of the original file, no new content

    I recently converted to Eudora 7 to 24.6 TB on Windows. TB seems to work ok except for one question.

    I have an email with 5 attachments. These files updated occasionally and I need to return them. With Eudora, I'd do a "send again" and the content of the update files would be attached and sent the email.

    TB I go to the sent folder and change as new. When I send the email, it sends the content of the old files not the updated content. I have to remove all attachments, and then tie them again to get the new content. It's very embarrassing.

    Is there a way to do the same kind of "send again" only authorized Eudora?

    No, it isn't. Eudora stored attachments in a folder and grabbed them if necessary. Thunderbird encodes at the time wherever they are attached, so there is the file on disk to update.

    Seriously consider what store files in a files on internet services and by using the links to the files in your mail.
    Google Reader automatically synchronize files with your PC and allow you to send links to the internet copies in your emails.

  • Assign pedal for only some sounds in a patch?

    I'm a newbie on MainStage 3, and I ran everywhere I can not solve a problem on many patches that I am programming.

    I would assign my pedal to some sounds in a patch, but not others.  (For example, I want to support to the sounds of piano, carpet and string in a patch, but not for a sound of arp in the same patch.) How would I go to do this?  (A lot of searching through forums/YouTube tutorials has not yet found the solution of it.)

    Thanks for any help you can give!

    In edit mode, click on the channel strip for the sound you don't want to respond to the sustain pedal.

    Then, in the Inspector of channel (down to the center of the screen), click the input tab MIDI.

    On the left side, you will see a list of check boxes labeled "filter". Select the item of "pedal of Sustain (64) ' in this list, and the synth assigned to this channel strip no longer meets the sustain pedal.

    I use this feature a lot in my plots of control meets various controllers synths. For example, I often will filter the controller "Expression (11)" so it does not affect the piano sounds (because the volume of this noise is controlled by the speed), but it affects organ or horns or other.

  • Looking for a w/SOUND Gmail Notifier. Using Windows 7, Firefox with igHome. Any help?

    I'm looking for a Gmail alert system with the sound. Just a pop-up window is not enough for my needs. I use Windows 7, Firefox and igHome. Gmail is open, at any time, in a pinned tab. Please note that the notifier must have sound advice. Thanks for any help.

    It does wonders for me
    https://addons.Mozilla.org/en-us/Firefox/addon/Gmail-Notifier-Restartless/?src=userprofile

    Gmail doesn't have to be open in a tab. But Firefox must be run.
    Add on has enough parameters to customize it to your liking.

    Maybe not for you but there is also a nice for Google calendar calendar add-on.

    https://addons.Mozilla.org/en-us/Firefox/addon/integrated-Google-Calendar/

  • New for synchronization, I have set up the sync account in my new laptop and linked to my main computer; now worry Sync will eliminate information on the primary computer. What should I do?

    Knowing nothing about the sync but enthusiastic about its benefits, I followed the directions for the implementation of a synchronization account in my new laptop. Then I realized that I should start with my main computer that has all the data I want to transfer to the new. However, Firefox won't let me set up the sync account in my main computer because it says I already have an account. He gave me a code to connect the main computer to the new, and I did. Now I'm afraid to sync for fear that this will eliminate the info in my main computer rather than transfer them to the new. Is this true, and if so, how can I do it again and get Firefox to establish the sync account in my main computer?

    Do not know what is it and how to use it
    see this:

    Firefox Sync - take your bookmarks, tabs, and personal information with you

  • Qosmio F30: installed new drivers now no sound.

    I have a Qosmio F30 (PQF32), have just started to use Driver Detective to update the drivers, problem is now I have no sound.
    Control Panel says no. Audio Device, and more when I boot it says new hardware found PCI but can not find the driver.
    Would appreciate any help to restore the sound on my PC... "Not impressed with Driver Detective".

    Hello

    Why you n t back to the first version of driver sound?

    You could do this driver download sound manually from the European pilot of Toshiba page.

    Then delete the old driver from the Device Manager (uninstall) and after rebooting again install the new downloaded driver.

    Usually, it should work!

  • New for iPhone charging Port 6 does not

    Recently, I had the charging port on my iPhone replaced 6, because the original had stopped working properly. With the original, I had to shake the charger autour so he could load, but it was so bad that I could only load if I it held in place. I went to a store local tech to g

    With the new port, I am able to load it with a standard charger Apple iPhone or iPad. However, it does not charge to something else - in the car, with a cell phone charger, when it is connected to my Mac - nothing. When it is connected to these other devices, the phone doesn't even it is plugged.

    Thoughts?

    Means, "went to a store local tech to fix.

    Looking for advice!

  • Need advice for speakers or sound system for Satellite L series

    Please advice or speakers acoustic system for L-series satellites

    Hi Svetlana

    It will be interesting to know what model of laptop you have exactly. Anyway, it is not easy to make good suggestion because in the market, there are many good external sound systems and especially the good one are a bit expensive.

    In my opinion, you should talk with your dealer and see in what price you want to buy speakers. Without a doubt, my favorite system is Logitech Z3.

    Good bye

  • VISTA and the new battery Bluetooth: no sound on headphones (Skype)

    Hello.

    I have a big problem: since I have updated Windows XP to VISTA I had to update the stack driver Bluetooth to the most recent available.
    Installation works very well. I can connect my headset is based. He said "plugged in and connected to Skype", but if I call someone, the sound always comes in my speakers and not via the headphones.

    Once, micro headphones listening, but now no longer works. I can press any button on the helmet, chance anything in the Options of Skyp... Nothing.
    With the old battery on XP the helmet has recognized as a Windows Audio device. He's not with the new battery. In Device Manager, two Bluetooth Audio devices are branded 'problem - driver issue '.

    I wish I could just use the old battery under Vista, but it does not work (not compatible with Vista).

    I really need help, SOON because I used to do all my calls through Skype Out.

    Greetings, your Tim

    You have a stereo headset or a monoheadset? What audio drivers have a conflict - bluetooth audio only or also audio system drivers?

  • Is Satellite A210 supports S/PDIF for 5.1 sound?

    Can someone help me?

    MY laptop has 2 connectors jack for sound (Satellite a210)... a mic and headphones.
    If you take a look at the attached picture (http://tinypic.com/view.php?pic=91cpoo&s=5) I have a DIGITAL hdmi PLUG... (I don't have a hdmi conn on my laptop)

    My question is... This is s/pdif?
    I ask this because I would be very happy if I can connect my 5.1 logitech Z5500 to my laptop and I have a 5.1 sound.
    Now, I have a stereo sound only.

    Hello

    The screenshot you posted in your display shows the audio properties of HDMI port! This has nothing to do with the headphone or microphone jack

    Of course much or some laptops are equipped with a headphone jack that offers a (digital) audio output SPDIF additional, but has nothing to do with HDMI.

    However, if you want to know if your computer laptop headphone s support s/pdif, consult your user manual. It is worth mentioning so popular helmet provides an output too much audio digital.

    PS; What A210-xxx you have exactly?
    I have an A210 with an ATI graphics card, but my phone has not been equipped with HDMI port

Maybe you are looking for

  • Summary of the conversation and visit apple store

    I was told on the apple store today, sending messages from iphone to iphone use actually given. Is this correct? In addition, I was told that if I use Pandora over wifi it is no use of data? Is this correct? Finally, I was told on the phone today tha

  • Pavilion p6-2364ea Windows 7

    Hello Windows 7 64 bit drivers do exist for this machine? Only OS listed is windows 8.

  • Idea of passport of blackBerry having three-row keyboard * and * no virtual keys

    Hey. What happens if you use gestures of sweeping on Passport to ALT and sticky ALT keyboard? Then the numbers and special characters could return to the physical keyboard with only three rows. The shift is done by pressing a button. Anyone? Justin D

  • Re: Use of refilled ink cartridge

    I bought a store black ink cartridge filled with brand 61 XL to the Canada computers tonite, because they were all black HP 61 ink cartridges. It was much less expensive than a cartridge of HP to the actual address, and they swore to me it would work

  • Windows Live Mail Inbox filling

    At the start of Windows Live Mail first my new emails are sent to the Inbox.  After initial start-up, no future emails will fill the Inbox until I press the icon to send/receive.  I wish that the new emails to load without pushing the send/receive ic