HA and drs response on failure VCMS

Similar Questions

• upgraded from VISTA to WIN 8/8.1 and I get hardware failure NMI shocks every day

  upgraded from VISTA to WIN 8/8.1 and I get hardware failure NMI shocks every day:

  problem started when I upgraded to WIN 8.  I get the dmp file but I don't know what to look for.

  I tried an error: see attachment

  I use a DELL optiplex.

  John

  Hi John,.

  Thank you for your response.

  This issue may occur if a computer hardware component is damaged, malfunctioning, or if an incompatible driver is installed on the computer.

  I suggest you follow the methods and check them off below if it helps:

  Method 1: I would say that you want to run cleanup start and check if it helps.

  https://support.Microsoft.com/en-us/KB/929135?WA=wsignin1.0

  Note: Please see: how to reset the computer to start as usual after troubleshooting by clean boot of Kb to start the computer in normal startup after's article have solved the problem.

  Method 2: I suggest you install the latest video drivers on the manufacturer's Web site as below.

  http://www.Dell.com/support/home/us/en/19/products/?app=drivers

  F or make reference to follow the article below you.

  http://Windows.Microsoft.com/en-us/Windows/install-upgrade-activate-help#install-upgrade-activate-help=Windows-8&V1H=winrttab1&V2H=win8tab1&V3H=win7tab1&v4h=winvistatab1

  Hope this information is helpful and let me know if you need additional assistance.

  Thank you.

• vSphere 4.1 HA and DRS technical Deepdive, the book!

  As many questions about this forum can be found in our book that has just been released, I wanted to share the following:

  VMware vSphere 4.1 HA and DRS technical Deepdive zoomed in on two key elements of each based VMware infrastructure and

  is not a "how to" Guide. It covers the basic steps needed to

  create a cluster VMware HA and DRS, but even more important, explain it to

  concepts and mechanisms behind HA and DRS, which will allow you to

  well-informed decisions. This book will take you the trenches of

  HA and DRS and give you the tools to understand and implement for example

  HA admission control policies, the DRS resource pools and resources

  distribution settings. In addition, each section contains basic design

  principles that can be used to design, implement or improve

  VMware infrastructure.

  Coverage includes:

  • HA the node types

  • HA isolation detection and response

  • HA admission control

  • Monitoring VM

  • HA and DRS integration

  • Algorithm of imbalance DRS

  • Resource pools

  • Impact of reservations and limits

  • CPU resources planning

  • Scheduler memory

  • DPM

  I hope you enjoy it and don't mind sharing this with you.

  Duncan

  VMware communities user moderator | VCDX

  -

  ---

  Out now: vSphere 4.1 HA and DRS deepdive

  Blogs: http://www.yellow-bricks.com | Twitter: http://www.twitter.com/DuncanYB

  Hi Duncan,.

  This book is available in India?

  I ordered the book on Jan. 9 in the Amazon and I get Feb. 22.

  Thank you

  Prakash

• HA and DRS

  I want to confirm something I've heard which seems to contradict what I've learned in the classroom.   If the DRS and HA are implemented on a cluster AND the failure of an ESX Server, the virtual machines on the host CAN live migrate to another host?    I was told in class that VMs will be always powered down if HA is implemented.  So which is true?

  In addition, if the DRS and HA have been implemented on a cluster and we will say I pull the plug on an ESX host... it is not enough time to migrate VMs live, so I'm inclined to believe that's NOT true.

  Let me see if I can summarize-------.

  HA - protects you in the event of a failure of the host - if a host fails (you pull the plug) the virtual machines running on this host will restart on the other nodes in the cluster and if DRS is activated it then make sure that virtual machines draw their resources. The way the cluster hosts know that they are alive is by the HA heartbeat if heart rate is not detected a host of the cluster think the host has failed, but he could not because of network problems - host is then described as being isolated but not bencessaryily down, so virtual machines on it are still running - the cluster tries to restart virtual machines but not power because the VMDK will be locked - this is where isolation answer comes to you can get the Power Down the VMs host to the HA cluster to restrt them (moving) or let them powere gift there is no failure (where they are). VMotion and DRS has nothing to do with VMware HA-

  FT - whicxh is a feature of the Enterprise Plus can have NO downtime in the event of a failure of the host and also protects from the questions of the o/s and - if there is a failure that the VM mirroring resumes instantly with no downtime of fault tolerance.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• OSB Proxy: response with failure: not getting caught in BPEL CatchAll block

  Hello
  
  I have a scenario where the Composite SOA name PS of OSB. In the PS OSB error handler, I use a response with failure at the end, and when this happens, the flow does not block the BPEL Tote, rather than the BPEL flow is get executed successfully. I believe that when we meet with failure (code 500), the current should go to the customer error handler.
  
  Please someone confirm what is the expected behavior.
  
  Thanks in advance.

  have you tried to call in the service of soapui and check the weather, you receive an envelope of soap fault?

  You can try to replace the body in the handler service error with a fault (hardcoded) soap envelope, simply too self how the capture of bpel is on it

  http://www.xenta.nl/Blog/2010/07/17/Oracle-service-bus-11g-handling-SOAP-faults/
  Maybe one is of no use

  We use the same in our middleware implementations and catches in bpel works very well for use (response failure + failure in the SOAP body)

• Best practices on UAT HA and DRS

  Dear Guru

  To test HA feature (I have esx 1 and esx2), I'm just saying that the only way to test HA is in the power of one of the esx1 and there are toggled to esx2, assuming that there is no constraint.   Can someone show me what is the best configuration to set on the, for example "allow VM to power it on if viloates contrainst... etc"

  One other scenario-let say I have set up a cluster and activated HA and DRS with resouce pool created.   Assumming If I deseelct DRS, will I be able to retrieve the list resources that I have previously set pool resources assuming that if I select DRS Again?

  Last scenario - let say I have 2 esx server who do not set up to be in a cluster.  If the port of vmotion is enabled on both hosts, am I right to say that I am able to perform a vmotion, even if host 2 did not configure for HA and DRS?

  Enjoy your patienace

  #1 I think that the answer is no. If you disable the DRS, all Resource Pools will be deleted and you will need to re-create if you decided to reactivate the DRS.

  #2-Oui, you can VMotion between two hosts that are not in any cluster, so they are managed by the same VirtualCenter and can see the same data warehouses

  Hope that helps! Please, help me by marking my response as "useful" or "correct", if you feel it is useful!

  -Amit

• many runtime errors and slow responses

  Originla title: what is WiseFixer and is a legitimate program?

  I get a lot of errors of execution and slow responses.  Ran the scan in the wise Fixer but was reluctant to unlock the registry to run the repair.

  Hello

  · When you receive the errors?

  · It is when you work with a program or a particular application?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed on the computer?

  · Give us the exact error message that you receive to help us best solve the problems.

  For the problem with the performance of the computer, you can follow the steps in the link below: how to make a computer faster: 6 ways to speed up your PC: http://www.microsoft.com/atwork/maintenance/speed.aspx

  NOTE: Microsoft cannot guarantee that problems resulting from the use of third-party software can be resolved. Software using third party is at your own risk.

• How can I find the question that I dropped off the 9.11.13 and the response that I received on my hotmail to Kim?

  Hello

  I guess that everything that you people are as stupid as me, so I need help.

  Saturday, I tabled a question about Live Mail, do not sync with my 2 Hotmail accounts.  I received a reply from Kim through my email account, and after following that advice should meet him which I did by hitting his email response.  Now, I get an email saying that my answer was available.  So I thought that maybe if I found my question, his answer would be to this topic, in the "community" section where I placed my initial question and I could hit answer here.  There is no section for Windows Live Mail in the Community Forum if I select Windows 7 Email and communications as my topic, as it was the closest I could get.  How I'd like a tab or a box that says "see your question and the responses, it has generated."

  I know it's a stupid question, but when you get past 70 things aren't as obvious apparently.

  Can someone help me?

  Alison

  You cannot respond to a notification by e-mail. Return to the forums and click the name Alison n (2) at the top of any page of your profile and look at My Questions to find the wire.

• I get BSOD on windows 8 and the STATE DRIVER FAILURE error. What should I do?

  I get BSOD on windows 8 and the STATE DRIVER FAILURE error. Never, it happens every time I got close the lid of my portable computer or attempt to put it to sleep. If it helps I have an ASUS S56C ultrabook. I have read other forums and noticed that this problem is related to my minidump file. The link is https://skydrive.live.com/redir?resid=B33EC443BFC08CAF! 239 & authkey =! APosKb0gDrCL_7M. Thanks to all those who can help you

  Hello

  Since there is a new check laptop with the seller and ASUStek support for warranty
  repair. As OEM ASUStek is responsible for the good operation of the equipment both
  and Windows. Keep in mind do you more they tell you it's something
  you did it. Added that even if you are somehow able to solve the problem you
  would that he documented in the case of other problems on the road.

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  =======================================================

  If you really want to solve the problem (which I do not recommend on a new computer
  under warranty):

  Results verified BlueScreenView WinDBG / DumpCHK.

  The Bug_Check has been iaStorA.sys 9F CAUSE i.e. technology Intel Rapid Storage Technology driver.

  9F error checking, {3, fffffa80121cf7f0, fffff800af4687e0, fffffa8013b01c60}

  Probably caused by: iaStorA.sys
  FAILURE_BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_iaStorA.sys

  BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_iaStorA.sys

  iaStorA.sys as of the 09/07/2012 which is Intel Rapid Storage Technology driver.

  fffff880 ' 01638000 fffff880' 01902000 iaStorA T (no symbol)
  Loaded symbol image file: iaStorA.sys
  Image path: \SystemRoot\System32\drivers\iaStorA.sys
  Image name: iaStorA.sys
  Timestamp: Wed Jul 09 13:42:33 2012 (4FFB4239)

  Collate ASUStek support, their drivers and documentation online and ask for their
  Forums about known problems.

  BiosVersion = K56CA.206
  BiosReleaseDate = 21/08/2012<- bios="" is="" fairly="" current="" however="" there="" may="" be="" an="">
  most recent version. Also check updates the chipset drivers and other key embedded
  and separate device drivers.
  SystemManufacturer = ASUSTeK COMPUTER INC..
  SystemProductName = K56CA
  Family = K
  SystemVersion = 1.0
  SystemSKU = ASUS-NotebookSKU
  BaseBoardManufacturer = ASUSTeK COMPUTER INC..
  BaseBoardProduct = K56CA
  BaseBoardVersion = 1.0

  ASUStek links above.

  After checking with ASUStek and if necessary to check updates with Intel.

  For the Intel driver update utility<-- run="" this="" after="" checking="" with="">
  http://www.Intel.com/p/en_US/support/detect?redirector_count=1&

  Intel - <- also="" search="" here="" -="">Quick storage drivers Download Center.
  http://Downloadcenter.Intel.com/

  Forums and Intel - Support - community
  http://intelopenport.hosted.Jivesoftware.com/Community/Tech

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I want to unsubscribe and no response on the phone or the paguina can cancel and send it to me at an another paguina where did not help me at all, how can I unsubscribe?

  I want to unsubscribe and no response on the phone or the paguina can cancel and send it to me at an another paguina where did not help me at all, how can I unsubscribe?

  Hello

  Please contact support by calling/chat for cancellation requests and billing queries:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  You can also check the help below document:

  https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  Please go through the Adobe - General conditions of subscription as well.

• Please explain SVmotion (Storage Vmotion) and DRS for storage in simple words

  Friends,

  I little confusing... could you please contact Storage vmotion and DRS for storage in simple words and the important points to remember in this regard...

  Kind regards

  Sirot

  9884106697

  Storage DRS is a feature that you allow warehouses of data aggregated on a single object (cluster) and recommend the implementation of disks in virtual machine based on the performance of the store of data and the available space on the data store.

  The DRS storage uses Storage vMotion to migrate virtual (online) computers from a data store to another to balance data store performance and space.

  You can use Storage vMotion without storage DRS too, moving virtual machine between clusters of DRS storage and warehouses of data even from the local level to the data store shared.

• Hello! I work with the Director 12, Windows 7. A fatal error occurred during my attempt to chance the script police. Now this fatal error occurred whenever I start the Director. I shut down the system and tried again, even failure. What can I do?

  Hello!

  I work with the Director 12, Windows 7. A fatal error occurred during my attempt to chance the script police. Now this fatal error occurred whenever I start the Director. I shut down the system and tried again, even failure.

  What can I do?

  Save the relevant keys, then search your registry at HKCU\Software\Adobe\Director\12\Script

  If this does not help, save the entire branch and try to delete it

• Disabled - HA and DRS cluster hosts do not appear in vCOPS

  Have a cluster HA and DRS disabled so that each of the 10 hosts act as autonomous.  In vCOPS 5.8 UI, the hosts appear in the accounts for the cluster but cannot explore them or access it from the search box.  Any ideas?  Thank you

  Found - http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2068303 problem solved.

• Change the PowerCLI Script to use the DRS and DRS storage

  Hello

  I have a PowerCLI script that specifies a host and a data store to create a new virtual machine, which has served us well. Now we have activated the DRS and DRS storage and I wonder what to change in order to take advantage of these features. Are there commands to specify a cluster and the cluster data store and let the DRS to decide the initial investment for a new virtual machine? At the moment we put all hosts and the warehouses of data as variables and use them in the line below.

  Thank you.

  $newVM = New-VM-name $NewVMname - VM $TemplateName Datastore - $datastore - VMHost $vHost - confirm: $false - location $myName

  You set a Datastorecluster?

  If Yes, then you can replace the value of parameter data with the datastorecluster object store.

  Replacing a VMHost with a cluster is not taken in charge I'm afraid.

  But you can use something like this

  New-VM-name TestVM Datastore - DSC - ResourcePool (Get-Cluster-name mycluster |) Get - Resourcepool - name of resources)

  This will automatically select the VMHost.

  The virtual machine appears in the root of the cluster.

  DSC is the name of a datastorecluster in the cluster mycluster

• HA and DRS pre-Caribbean

  Dear team,

  Please let me know prerequisites them HA and DRS.

  concerning

  Mr. VMware

  In both cases:

  -> Storage access shared

  -> The correct license level

  -> Hosts configured in a cluster

  -> A permitted vMotion VMkernel port group to the SRD