OSB Proxy: response with failure: not getting caught in BPEL CatchAll block

Similar Questions

• Problem with DIV not getting not my text block margins and bleeding on the right foot

  Hi, using Dreamweaver 8, in Windows XP. My level... ok with WYSIWYG and tables, but not much else.
  
  I downloaded this page as a free template, and the guy uses the div that I suck quite well to do. Yes, as I don't know what I'm doing with the DIV, I seem to have trouble.
  
  In Firefox, the text is too close to the left and the right. Where are the margins? It would be good to have margin px 5-10 from both sides. And he's bleeding off the coast of the right side of the white box. You have an idea why this is? And what is the reference for that? Should I through a table in there?
  
  I tried to put the padding and margins in CSS in the file for the "wrappers" but seem to have no chance.
  
  http://www.manmeetswoman.com/dating_advice/index.html
  
  Thank you.
  
  Ron

  Check all the property values of width in your CSS. To get started, you
  Width: 780px #wrapper - 2 and width: 800px for the h1, which is inside your
  #wrapper - 2 div. And there's more. Fix them and see if that helps.

  --

  Walt

  "audio90" wrote in message
  News:gjimru$BG1$1@forums. Macromedia.com...
  > Ok, I went through and corrected the errors (I think - he gets a "past")
  (> rating).
  >
  > Problems always seem to be there. Suggestions?

• headset with custom not getting class not called...

  Hi all

  I expanded the customclass with the field. I drew a rectangle rounded in it. now, I want that the listener must get called when I click on the rectangle and the dialog box should appear. I managed the setchangelistener, but of no use. Here is my code...

  package com.samples;
  
  import net.rim.device.api.ui.Field;
  import net.rim.device.api.ui.FieldChangeListener;
  import net.rim.device.api.ui.Manager;
  import net.rim.device.api.ui.component.Dialog;
  import net.rim.device.api.ui.container.MainScreen;
  import net.rim.device.api.ui.container.VerticalFieldManager;
  
  public class CustomPaintingScreen extends MainScreen implements FieldChangeListener
  {
      public CustomPaintingScreen()
      {
          setTitle("Custom Painting ");
          CustomClass cstmcls = new CustomClass();
          cstmcls.setChangeListener(this);
          add(cstmcls);
           }
  
      public void fieldChanged(Field field, int context)
      {
          if(field instanceof CustomClass)
          {
              Dialog.alert("clicked");
          }
      }
  }
  -----------------
  package com.samples;
  
  import net.rim.device.api.system.Bitmap;
  import net.rim.device.api.system.Display;
  import net.rim.device.api.ui.Field;
  import net.rim.device.api.ui.Graphics;
  import net.rim.device.api.ui.XYRect;
  
  public class CustomClass extends Field
  {
      protected void layout(int width, int height)
      {
          height = getFont().getHeight()* 8;
          setExtent(Display.getWidth(), height);
      }
  
      protected void paint(Graphics graphics)
      {
          graphics.setColor(0xFF7F24);
          graphics.fillRoundRect(5, 5, (getWidth()-10), (getFont().getHeight()*5), 30, 40);
      }
  }
  

  When the rounded rectangle is clicked I want to display the alert message.

  

  The essential code in this post is as follows:

  protected boolean navigationClick (int status, int time) {}
  fieldChangeNotify (1);
      Return super.navigationClick (status, time);
  }

• Proxy Apache with APEX

  Hey all. I try to use Apache to proxy port with APEX. We have a client that blocks their out past ports, so I need our application to run on the network on ports 80 and 8080 not. So basically, I'm trying to turn this:
  
  www.Host.com:8080 / pls/apex/f? p = 102:1:1536109969823621
  
  to do this:
  
  www.Host.com/pls/apex/f?p=102:1:1536109969823621
  
  I worked with Apache ProxyPass in the past, but I have always been pointing to a folder like www.example.com/test/ and not have to worry about the arguments after the last.
  
  Someone at - it experience with this?
  
  Thank you
  Ben

  Ben,

  Use something like this-

  
  ServerName www.foo.com
  ServerAlias www.foo.com
  RewriteRule ^/$ /pls/apex/f?p=102:1 [R=301]
  ProxyPass /pls/apex http://localhost:7777/pls/apex
  ProxyPassReverse /pls/apex http://localhost:7777/pls/apex
  ProxyPass /i http://localhost:7777/i
  ProxyPassReverse /i http://localhost:7777/i
  
  

  Of course adapt the servername/Alias to your (and also the id of the application if it is not 102).

  Hope this helps,

  John.
  --------------------------------------------
  Blog: http://jes.blogs.shellprompt.net
  Work: http://www.apex-evangelists.com
  Author of Pro Application Express: http://tinyurl.com/3gu7cd
  AWARDS: Don't forget to mark correct or useful posts on the forum, not only for my answers, but for everyone!

• I'm having a problem of system image backup. Whenever I try a backup I get the following response "there is not enough disk space to create the volume shadow copy on the storage location.

  I use Windows 7 Pro.  My target drive is drive ext WD 2 TB MY PASSPORT and my source drive is an internal 1 TB WD drive, I also tried to make a copy of the image using a 3 TB external drive Seagate Replica.  Two targets readers have had a least 1.5 TB of free space.  The source drive has 720 GB of free space.  My computer has 16 GB of memory.  In addition, while I am now using Windows backup and restore I tried also to use the Seagate Software.  I was able to make a copy of clone of my partition to the C drive on a 1 TB Passport drive

  [Moved frm comments]

  Hi Steve,.

  You get an error code?

  This error comes usually when the system reserved 100 MB hidden partition created by Windows 7 does not have enough space to store a cliché. Please check the free space on this volume. Follow the following steps:

  I suggest you perform the steps mentioned in this similar discussion.

  Not enough space on the backup discs to use VSS.

  http://social.technet.Microsoft.com/forums/Windows/en-us/b3b6ec73-A747-4025-9397-4e9c7fd1c24e/not-enough-space-on-drives-for-backup-to-use-VSS

  Hope this information helps. Response with status so that we can help you.

• I've recently updated my firefox to my laptop. No longer can I do a search with Google without getting a message that the address of the site/is not secure. How to cancel?

  I've recently updated my firefox to my laptop. No longer can I do a search with Google without getting a message that the address of the site/is not secure. How to cancel? The only search that allows me to see whatever it is is Yahoo that I prefer not to use. In addition, I have to click through a series of tabs to make sure that I know that Yahoo does not feel that the site is secure before it connects. I must tell you that I have strongly dislikes this upgrade and want to return to the old Firefox.

  What is you receive the exact error message? Did you check your date and time? Refreshed Firefox? Refresh Firefox – reset the parameters and modules

• Win7 with FF 31, smart phone 4.2 with FF letest ver. using the same account with 1 email. But the phone is not getting any collar, Bokmr, etc.

  Brother.
  We use win7 with Mozila 31, 4.2 with Mozila Android smart phone latest google app store on 04/10/0214. Using the same account with the same email. But the phone does not get any new information of win7 with Mozila 31. PL z give useful information.

  Hi w3ur_team,
  Thank you for your question. I understand that there are two features that are documented in the sync account. However the Android is not synchronized.

  There are two places we can check:

  1. In the Android settings, under accounts is the Firefox Sync or Firefox Sync (discouraged) joint account?
  2. Credentials work on accounts.firefox.com on the mobile device and are there any error messages in the synchronization of the settings menu > sync?

  See also Firefox Sync troubleshooting and tips for more troubleshooting steps.

• Still not get 2016 Outlook and Contacts calendar to synchronize with iCloud. iCloud data file has not been in Outlook but iCloud add-in is enabled.

  I use Windows 10 (v1511), 2016 Outlook Office 365 and iCloud 5.2. Mail is downloaded directly to Google mail Outlook. Calendar and Contacts live in iCloud and work properly in my iPhone, iPad and the app iCloud on the PC. Its just perspective that is not sync with iCloud to get these items.

  In outlook, the Setup program is not set up a data iCloud file ' * APLZOD.pst ' in the account tab data file settings. When you try to install a new data file in Outlook in account settings, the iCloud type available, but when you select what the error message says that this cannot be set in the iCloud Control Panel

  I tried several complete removal and then re - installs to iCloud for windows and have also done with the firewall and antivirus disabled active.

  I also deleted the Outlook data file * *.ost and allowed the installation program rebuild this application fee.

  The iCloud "add to" Outlook "add-ins" is active.

  The calendar, Contacts and tasks of the iCloud Panel section is checked when re-built, but after Outlook is running this section has not been verified and when you try to check it out and apply the change he UN-checks itself.

  Sorry for the long post, but I tried to solve this problem for some time.

  Thank you

  Chris

  The same problem.  I use iCloud for Windows 5.2 and Windows 10, 2016 office.   Everything worked well for several months until a few months ago, when sync calendar has stopped working.   I've updated iCloud of 5.1 to 5.2 but that just killed altogether.  Tried uninstalling icloud and relocation costs.  No luck.  When the iCloud settings appears, I check the box for the calendar and Contacts.  The driver then disappears.   I check again and it sticks.  But no messages on 'configure '.   When I close and reopen, the box is unchecked.   A few days ago I had the same problems the other another thread where he would show "set up" spinning forever (well, 30 minutes before giving up).   Not sure if it's an Apple problem or a problem of office.  But this is of course a problem.

• Satellite A210-19Z: could not get internet to work with Windows XP installed

  Hello

  When I install Windows XP on my Satellite I can not get Internet to work

  Do I have to install drivers or so?
  Please post links to the drivers if so.

  Christian

  Of course you need readers.

  If you have connected your router with a LAN cable, then you will need to install the LAN driver. If you want to use the network WiFi WLan driver must be installed also.
  If your computer laptop doesn t supports the WLan card then the WLan driver is not required

  All the drivers (if available) XP can be downloaded from the European driver Toshiba page!

• When he puts an end to Firefox 3.6.6 firefox.exe continues to turn, visible in the Manager of tasks (XP) and stimulates the activity of the CPU up to 60% with the danger of overheating. Have not found an appropriate response with the search term "abnormal

  When he puts an end to Firefox 3.6.6 firefox.exe continues to turn, visible in the Manager of tasks (XP) and stimulates the activity of the CPU up to 60% with the danger of overheating. Have not found an appropriate response with the search term "abnormal termination of the program."

  This has happened

  A few times a week

  is after update of Firefox 3.6.4

  I have the same problem with Firefox 3.6.6 except that it also consumes massive amounts of CPU during the race. This version also adds a new process on your system. I am running XP and in the beginning I tried to disable some plug-ins. Always consumed too much memory. I went back to version 3.6 and the new process went, and the CPU consumption is way down. Something is wrong with the latest version of Firefox, I never saw behave this way. Revert to a previous version (Filehippo) and you will see the difference.

• Programatically register values of control only works with Ctrl Val.Get all (not recommended)

  Hello

  I just downloaded "programmatically save 86 vi of https://decibel.ni.com/content/docs/DOC-3551 control values.

  This works.  In the recording, but there an invoke with Ctrl Val.Get All (deprectated) node structure of the event.  I thought that I would get rid of the obsolete reselecting the control method get all.  Of course it was more an (outdated) at the end and the top of the page, little changed from pink to yellow.  However when I run and load a file that is saved I get: error 116 took place to Unflatten chain... Possible reasons:

  LabVIEW: Unflatten or stream of bytes read operation was in pain due to corrupted, unexpected or truncated data.

  A few questions:

  If I were writing this thing without having to download the example it wouldn't work.  Any ideas how I would work in LabVIEW 2011?

  The example is quite old, people would use another method of loading and storage of the parameters in a VI these days?

  This VI crashes after a while.  Is it because he has two event Structures in a loop or because there is no case of timeout or what? (I am not really concerned about why it crashes but if someone knows the answer without wasting time running it I'd appreciate it)

  Thanks for the tips, things that I can draw from this

  The old ways worked with a data type that was {name, type descriptor, flattened data}. The use of new methods {name, variant}, to adapt the code to work with this data type. Also, you cannot use the old data with the new code files.

  I'm assuming that the VI is lock because you have two structures of event in a loop simple (it would make sense, since each structure must wait for an event is to occur), but I'm not the code itself, I can't be sure.

  With respect to the other options, I generally without saving all the controls on a front panel, but when I want to record a bunch of controls, I usually use something like this, which can also work if you collect all the controls of the FP. There are also links to other similar things in the more 'like this' section with the page.

• My PC (win XP) can not get Internet through a Bluetooth adapter to the phone, same phone work with win 7 & vista.

  Original title: internet telephone

  My PC (win XP) can not get Internet through a Bluetooth adapter to the phone, same phone work with win 7 & vista

  Hello

  1. What is the brand and model of the phone and Bluetooth adapter?
  2. what exactly happens when you access the internet via your phone?

  Please provide more information. This will help us assist you better.

  How to ask a question

  http://support.Microsoft.com/kb/555375

  Also, please take a look at the below items that might help you.

  How to install and configure Bluetooth devices in Windows XP Service Pack 2

  How to troubleshoot Bluetooth detection and connectivity issues in Windows XP Service Pack 2

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• during startup, I get an error message. Your SQL server installation is either corrupt or has been tampered with (could not open SQLEVN70. RLL) how to solve this problem?

  during startup, I get an error message.  Your SQL server installation is either corrupt or has been tampered with (could not open SQLEVN70. RLL) how to solve this problem?

  Thank you for visiting the Microsoft answers community.

  The question you have posted is associated with MS SQL server and would be better suited to the Group Discussion TechNet Microsoft. Please visit this link to find a community that will provide the support you want.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Of hard drive and installed new drive but Code failure not accepted. Original install was XP with Vista update.

  Of hard drive and installed new drive but Code failure not accepted.  Original install was XP with Vista update.  What do I need to install the xp before installing vista?

  How to activate Windows 7 or Vista manually (activate by phone)
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  Also:
  How to activate Windows Vista by phone
  http://support.Microsoft.com/kb/940315
  http://www.mydigitallife.info/2008/10/13/how-to-activate-Windows-Vista-by-phone-activation/

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• E-mails are with incredimail, to get ok. will not go. Then the Outbox disappears altogether

  E-mails are with incredimail, to get ok. will not go. Outbox then completely disappears. I need lots of help. Please

  Hello

  Thank you for your message. It seems that there is a problem with your IncrediMail.

  Help about the software, you will need to contact help here http://www.incredimail.com/english/help/support.aspx

  Feel free to use the forum for any other issue of Windows, you may have.