had c ++ runtime error when checking the consistency in administration tool

Similar Questions

• When I try to open a file it SAIS - "error!" Check the activation.

  Hello

  When I try to open the file that I downloaded in the library he says "error!" Check the activation.

  I have my Adobe ID staff assigned to my laptop - does that mean that I can't read books borrowed from the library of the University?

  Thank you

  L

  As I had the same problem, I contacted customer car with link above.

  The agent "Tshering" told me to go to the forum and ask for help here.

  My situation:

  10 Windows pro 64 bit German 1511

  ADE 4.5.1.139278 German

  error message "error!" Check the activation.

  ---

  What I did:

  1 reinstall ADE - no change, and he said: already authorized

  2 tried to disable the permission - failed with the message: cannot be done in the moment, try again later

  3. contacted customer service, - failed with the message: contact forum, they will help you

• "Connection error. Check the Internet connection. "When you try to enable Web Services on HP 1606dn

  Error message "connection error. Check the Internet connection. " When you try to enable Web Services on HP Laserjet 1606dn.

  Operating system: Windows 7

  Thanks for the help,

  Howard

  Last UPDATED 21/07/13: after upgrading the firmware to the latest version, I could enable web services. Great help has this video: http://www.youtube.com/watch?v=Q5gpIGZXDXw

  Thanks for trying to help.

  In my case, it did not help.

  I followed the instructions on this video: http://www.youtube.com/watch?v=Q5gpIGZXDXw.

  The key was the update of the firmware, I think.

  Walter

• On Digital Editions 1.7.2.1131 Error2038 / / on digital editions 4.0.3.117585 "error!" Check the Activation"/ / when trying to download a DRM protected book. Digital Editions IS allowed!

  Hello

  My Digital Editions works great for years (even through the migration from one PC to the other), then all of a sudden yesterday I could not download any new DRM protected EPUB or PDF files.

  I was running from Adobe Digital Editions 1.7.2.1131

  Whenever I would get errors like:

  Europe_at_War_1939_1945:

  IO error on the network request.

  Please check your network connection and try again.

  Network path:

  https://books.google.com.au/books/download/Europe_at_War_1939_1945.epub?acsid=urn:uuid:xxx xxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx & output = acs4_book_bytes

  Details of the event:

  Error #2038

  -end-

  So I've upgraded to Adobe Digital Editions 4.0.3.117585

  Always impossible to download DRM protected books, but now I have a simple:

  "Error!" Check the Activation.

  I've activated all the time on both versions.

  Please... What is the problem?

  David Armitage

  You can also try the steps below:

  1. install ADE 1.7 [your old version od ADE]

  2 remove the authorization of ADE [hotkey 'ctrl + shift + d' for windows or 'cmd + shift + d' for mac]

  3. install ADE 4.0.3.117585.

  4. in addition to AUTHORISE ADE, aid-> allows now computer.

  I hope this works!

• Microsoft Visual C++ Runtime Library Runtime Error when I try to open PDF files

  Original title: Microsoft Visual C++ runtime error

  I get a Microsoft Visual C++ Runtime Library Runtime Error when I try to open the PDF files. I tried to locate this application in C:\program may explorer\iexplore.ex but cannot locate. How to solve this problem?

  This error started only last month. When I try to open sites that have PDF files, he flashes a warning and then goes in a loop, try to restore. How to fix this error?

  Hi Brent,

  1. is the specific question for PDF files?

  2. have you made any recent hardware or exchange of software on your computer before the show?

  3. which PDF file you are trying to open?

  Please follow the methods:

  Method 1:

  You need perform a clean boot to prevent any third party conflicting application to interfere with the computer.

  To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: You must follow step 4 of the article mentioned above to recover the computer to Normal startup after you complete all the steps.

  Method 2:

  To repair Microsoft Visual C++ Runtime Library Runtime Error:

  a. Quit all programs. It is Internet Explorer.

  b. click on the "Start" button on the lower left side of the screen. On the start menu, select "run".
  c. in the window "Run", type "inetcpl.cpl."

  d. in the window "Internet Options", select the "Advanced" tab Under "Reset Internet Explorer settings" section, click "Reset".

  e. click 'Close' in the window "Reset Internet Explorer settings" that appears.

  I hope this helps.

• "Connection error. Check the Internet connection. »

  I just installed my printer (an HP CM2320fxi upgrade). Everything works except ePrint/Web Services. The printer is connected directly to my router. It prints network computers. AirPrint works from iOS devices. It can scan to e-mail and documents are properly received by mail outside the network accounts (i.e. it must be connected to and talk to the internet). All the router firmware and the printer has been confirmed to date. all devices have been reset and restarted several times. However, if I try to activate HP Web Services for ePrint installation, I get the following error message: "connection error. Check the Internet connection. »

  After struggling with this issue for many months, including many discussions phone and email exchanges with technical support from HP, they finally sent me a replacement printer.  It works as advertised right out of the box.  I don't know what was the underlying problem, but the fact is that he couldn't be corrected with one of the solutions proposed in the discussions on this forum.  Apparently, there's HP printers out there with a lack of internet connection has nothing to do with a solution that is configurable by the user.  If you have one, then you will need to replace your printer.

  I can't thank HP for that.  They tried my patience and tenacity of the months before offering the only real solution.  They must know their products better than that and should have replaced my printer several months ago.  That being said, the tech person with whom I had most of my relationships, it was a nice guy.  I expect he's working under an edict on exhausting all possible tactics before agreeing to replace the unit.

  Good luck!

• I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application.

  I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application" when I click ok it reboots. I can even recover the system, tried F8 startup, alt/F10, F2, launch repair system, Safe Mode and all the rest and still get the same error. System specs are Acer Aspire 5920, Intel T5450 processor, 2 GB ram, 160 GB of HDD, windows vista edition Home premium.  I am currently under the memory diagnostic tool windows, but it is said that the test results will be displayed again once you log in, but I can't log in to view them.  The test seems to be hanging around 21% so I don't know how well it will do

  Hi A1W1LL,

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure that may help you resolve the issue.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  If you are not able to boot to the desktop, you can try to restore your computer from WinRE.

  1. Insert the Windows Vista installation disc in the disc drive, and then start the computer.
  2. Press any key when the message "Press any key to boot from CD or DVD".
  3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
  4. click on repair your computer.
  5. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next
  6. in the System Recovery Options dialog box, click System Restore.
  7. follow the instructions in the wizard to restore system as usual and choose the appropriate restore point.
  8. click Finish to restore the system.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Why do I have microsoft visual c ++ runtime error when I tried to install my hp printer

  Why do I have microsoft visal c++ runtime error when I try o install my hp printer cd

  Hello
  1 did you change on your computer before this problem?
  2. What is the brand and model of your computer?

  3. What is the exact error message?
  Follow the suggestions and see if it helps.

  Method 1
  You can see the article mentioned below.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2
  You can follow the procedure in the article.
  What is a runtime error?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-runtime-error

  You can also see the article for more information.
  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

• DRAC5 "Error when reading the SSL socket connection"?

  Hello

  I have a BIOS of PowerEdge 1950 2.7.0 with DRAC 5 Firmware Version 1.65 (12.08.16).

  When you try to connect to 'Console' I get the error "Error when reading the SSL socket connection".

  I spoke the line "# jdk.tls.disabledAlgorithms = SSLv3, RC4, MD5withRSA, DH keySize.< 768"="" at java.security="" file="" but="" still="" the="">

  I use WIndows 10 with the latest FireFox.

  Thanks in advance,

  Asaf

  I found that these changes were necessary to connect to the DRAC 5 using Chrome and Java 8, rev card. 91:

  In Control Panel > Java > Security:

  1. check "Enable content of java in the browser.

  2. set the security level to "High".

  3. Add each DRAC IP to the list of exceptions

  In C:\Program Files (x86)\Java\jre1.8.0_91\lib\security\java.security):

  Remove MD5:

  jdk.certpath.disabledAlgorithms=MD2, RSA keySize < 1024
  

  Remove SSLv3, RC4 and MD5withRSA:

  jdk.tls.disabledAlgorithms=DH keySize < 768
  

• Laserject 1606dn error, "connection error. Check the internet connection. "during activation ePrint

  I try to turn on my LJ 1606dn ePrint. I downloaded and installed the firmware and that is okay. I went to the Web Services tab to get the code to register the printer. When I click on 'Activate' in the ePrint section, I get the error, "connection error. Check the internet connection. "My connection network and internet are working properly. Am I missing something? I need to open a port on my router? Is there a special song, I need reciting under the full moon while sacrificing a live chicken?

  Thank you

  Joe

  jfusco,

  If you have an IP address manually, assigned to the printer:

  1. Enter IP address of the printer in the Web browser address bar and press ENTER.
  2. Go to the network tab and the IPv4 Configuration of the page.
  3. In the DNS server settings, the entry in your domain DNS servers or put IP of the router Address in the preferred DNS server and 0.0.0.0 or 8.8.8.8 in the section auxiliary DNS server and apply the changes.

• Error.  Check the Activation.

  Hello, although my computer is allowed to read the content through the ADE, when I try to open E-Books, I get the ' error.  Check the Activation' message.  I saw online that the cancellation of authorization and reauthorizing are a solution, but I do not know what to enter VendorID and password.  Is there a way to retrieve this information?  Are there other solutions here?

  Best,

  Ryan

  Windows:

  Close all applications.

  Click Start > run.

  Open, type regedit in the text box and press ENTER. The Registry Editor opens.

  In the left pane of the registry editor, locate the following registry key: HKEY_CURRENT_USER\Software\Adobe\Adept

  Select the key of the follower.

  Choose file > export.

  In the export registry file dialog box, select the branch selected under export range. Enter a name and location for the backup registry key, and then click Save.

  Right click on the key to the follower, and then choose Remove.

  In the dialog box confirm the key deletion, click OK.

  Close the registry editor.

  Open Adobe Digital Editions and reauthorize.

  Macintosh:

  exit the Adobe Digital Editions software.

  Navigate to / Users / / Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash.

  If you use 10.7, see https://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html

  Open Adobe Digital Editions and reauthorize.

• Error when parsing the file ' value of the 'src' attribute is not valid; must be a URI'.  ERROR (RSC-005) to "Hetgeheimfietsen.epub/OEBPS/toc.xhtml" (line 10, col 10): error while parsing the file ' "ol" element not allowed here; wait for the end-tag of t

  The members of the Forum kan help you

  Validation by using version 3.0.1 EPUB rules.

  ()https://github.com/IDPF/epubcheck( )

  December 9, 2015 15:27:33 THIS

  ---------------------------------------------------

  WARNING (OPF-007) to 'Hetgeheimfietsen.epub/OEBPS/content.opf' (line 2, column 227):

  Re-declaration of prefix reserved "rendition."

  ERROR (RSC-005) to "Hetgeheimfietsen.epub/OEBPS/toc.xhtml" (line 10, col 10):

  Error when parsing the file ' "ol" element not allowed here; waiting for the end-tag of the element or element "li" '.

  WARNING (CSS-007) to "Hetgeheimfietsen.epub/OEBPS/css/idGeneratedStyles_0.css" (line 60, col 2):

  Police made OEBPS/font/CambriaMath.ttc refers to fonts not standard type application/x-police-FTT.

  WARNING (PKG-012) to "Hetgeheimfietsen.epub/OEBPS/De_Alpe_d'Huez-1.xhtml":

  File name contains following non ascii characters: '. You want to change the name of the file.

  WARNING (PKG-012) to "Hetgeheimfietsen.epub/OEBPS/De_Alpe_d'Huez-2.xhtml":

  File name contains following non ascii characters: '. You want to change the name of the file.

  Check the finish with warnings or errors!

  In the file Toc delete the second "ol", as well as closing like Epubcheck duplicate codes

  the one after the other (delete the other)

• ADE 4.0 does not allow me to download the books from my library: "error!" Check the Activation.

  When you try to download a book from ADE 4.0 to my library I have this message: "Error!" Check the Activation. I deleted ADE my computer and reinstalled and also unaurhorized it and then cleared. But the problem persists. How can I fix this problem?

  If for some reason you cannot withdraw the authorization of ADE, follow the steps below:

  Mac: Navigate to / Users / / Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash.

  ADE will be cancelled now.

  Now allow ADE new.

  Windows:

  Click Start > run.

  Open, type regedit in the text box and press ENTER. The Registry Editor opens.

  In the left pane of the registry editor, find the following registry key:

  HKEY_CURRENT_USER\Software\Adobe\Adept

  Right click on the key to the follower, and then choose Remove.

  In the dialog box confirm the key deletion, click OK.

  Your permission is removed.

  ADE will be cancelled now.

  Now allow ADE new.

  Reference:

  https://helpx.Adobe.com/Digital-Editions/KB/error-e_act_not_ready.html

• Error when setting the parameters on the tool

  Hi experts,
  
  I want to use ODIsqlunload, but it still gives the error. My win7 OS
  
  error:
  
  oracle.odi.oditools.OdiToolInvalidParameterException: error when setting the parameters on the tool
  at com.sunopsis.dwg.function.SnpsFunctionBase.getCoreOdiTool(SnpsFunctionBase.java:620)
  at com.sunopsis.dwg.function.SnpsFunctionBase.getSunopsisApi(SnpsFunctionBase.java:494)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.executeOdiCommand(SnpSessTaskSql.java:1415)
  at oracle.odi.runtime.agent.execution.cmd.OdiCommandExecutor.execute(OdiCommandExecutor.java:32)
  at oracle.odi.runtime.agent.execution.cmd.OdiCommandExecutor.execute(OdiCommandExecutor.java:1)
  at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:338)
  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
  at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:263)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:822)
  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:83)
  at java.lang.Thread.run(Thread.java:662)
  Caused by: java.lang.Exception: ODI-30044: invalid parameter:-file
  at com.sunopsis.dwg.function.SnpsFunctionBase.actionSetParameters(SnpsFunctionBase.java:251)
  at com.sunopsis.dwg.function.SnpsFunctionBase.setParameters(SnpsFunctionBase.java:799)
  at com.sunopsis.dwg.function.SnpsFunctionBase.getCoreOdiTool(SnpsFunctionBase.java:616)
  ... 18 more
  
  and the code is:
  
  "SnpsSqlUnload «-file=F:\temp/data_6001_1001.dat" "-driver oracle.jdbc.OracleDriver =" «-URL=jdbc:oracle:thin:@musty-Pc:1521:XE "-user = system-pass = < @= snpRef.getInfo ("SRC_ENCODED_PASS") @ > - file_format variable = - charset_encoding = UTF8 '-row_sep = \n" "-date_format = YYYY-MM-DD '-fetch_size = 1000 '-field_sep = #
  Select / * + * /.
  
  columns...
  table...
  where (1 = 1)
  
  I have try this - settings file:
  
  F:\data_6001_1001.dat
  F:\test.txt
  C:\Test\test.txt
  C:/data_6001_1001.dat
  C:\test/data_6001_1001.txt
  c:/test/data_6001_1001.txt
  C:\test/data_6001_1001.dat
  
  all of them same result :(
  
  Please help me experts :(

  Hi experts, I have solved my problem :))

  my code like this:

  "SnpsSqlUnload «-file=F:\temp/data_6001_1001.dat" "-driver oracle.jdbc.OracleDriver =" «-URL=jdbc:oracle:thin:@musty-Pc:1521:XE "- user = system-pass =<@=snpRef.getInfo("SRC_ENCODED_PASS") @=""> - file_format variable = - charset_encoding = UTF - 8 '-row_sep = \n" "-date_format = YYYY-MM-DD '-fetch_size = 1000 '-field_sep = #
  Select / * + * /.

  But it's really strange! I change only the file--> FILE and driver---> DRIVER and row_sep--> ROW_SEP and etc...

  I don't know why, but they should be higher. I did on linux OS 64 bit and no mistake.
  But win7 it gave me error.

  I thik it's a bug...

• I get this error when submitting the question to DPS

  Hi uses Woodwing Enterprise to publish fact sheets on the DPS from Adobe and it was okay, I ended up creating a new show and I get this error when submitting the question to DPS: Adobe Distibution Server returned the error when calling "createIssue. Code HTTP: 401. HTTP message. "Unknown error.". Results Adobe message: "unauthorized access. Check the logs for more details". Adobe results status: "Not ALLOWED." The DPS account has been recently renewed

  Please contact the support gold on this problem.