had to get my windows

Similar Questions

• I had windows 10 and it crashed my pc. A friend put a test windows 7 on my pc and now it says that it isn't geninue copy of windows. How can I get back windows 7?

  How can I get my windows 7 back, as if it was before? And I have to pay for this?

  Windows 10 crashed my pc, and I need help please

  Claire-

  The PC comes with Windows 7 the plant?  If so there should be a COA sticker on the outside, or under the battery with a product key used to activate.  Also on the label is printed the licensed version.  Now look at control panel > system to confirm page which is the version that has been installed.  If so, scroll down to the activation link to "Change product key" and insert the key to the sticker.

  It is easy to mistake the 25 digit key characters.  What I do is take a picture of the phone and huge blow up, so check each character before submitting the key.

  If Windows 10 had activated, you can also get a facility much better to do a Clean install Windows 10 improvement will be paid to questions of lower upgrade installation, which should reactivate with the permanent right granted once did you the upgrade.

  Let us know if that helps.

• I had photoshop on my windows now the graphics card has gone bad and you want to move to my MAC I pay every month and I am a student, so, how can I transfer accounts until I get a new computer

  I had photoshop on my windows now the graphics card has gone bad and you want to move to my MAC I pay every month and I am a student, so, how can I transfer accounts until I get a new computer

  If you are on subscription, you just install it on your new computer and sign in with your ID Adobe that you used to buy PS when you arrive up to two installs, it will tell you that you have exceeded you install limit and asks if you want to disconnect other computers. Just so disconnect you. No need to have to disable or call Adobe!

• I had to get a new hard drive without any OS it is possible to use the product key of Vista on the bottom of my laptop to recover Windows Vista?

  My old hard drive which had Vista completely died and it was impossible to get it working again. So I had to get a new which had not any OS, so I'm running a version unaudited 7. Is it possible to return to this laptop Vista using the given product key?

  Hello

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Pavilion g6: get 10 Windows

  I have all the updates that are requested, but I don't always have the 'Get 10 Windows' app

  This is what has worked for me on 2 of my PC that just would not receive this icon appears...

  I zipped and tied a tool that hopefully will get windows 10 icon on the taskbar of your PC, as it did for me.

  To run it, unzip the file and right-click on the file and select run as administrator.

  After reading the disclaimer notice, run the first menu item to confirm your PC has the required updates.

  Then run the second menu item, and it is the one that did the trick for me.

  A member had run the third menu item so he can appear on his PC.

  Then simply click on the GET W10 icon to get a software booking W10.

• "Windows failed the genuine validation...". Go online and set now and get genuine Windows. »

  I get a message "Windows failed the genuine validation...". Go online and set now and get genuine Windows. "I have a copy of Windows XP that I bought in the store.  My computer came with Vista; When the hard drive crashed, I had the store install the copy of XP that I had bought earlier, instead of reinstalling Vista.  Why I shouldn't "genuine Windows" already?

  You have an installation made from a set of recovery discs Dell on a Hewlett-Packard machine.

  This facility has NOT been made using appropriate media and it is likely that this is what is causing your problems.

  Next time, the system displays as non-authentique try to use Update tool product key to make the real system-

  Use the product key update tool - http://windows.microsoft.com/en-GB/windows/help/genuine/product-key to change the key for that which concerns your COA sticker, and then to restart and to publish a new report MGADiag we can confirm everything went well

• How can I get the windows update? X8024400A error)

  I did a restore after my pro windows xp crashed now can't do windows update! How can I get the windows update? I get an error from the site Web has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. X8024400A error)

  Please help me!

  I could not download my favorite Antivirus unable to get updates.  Only a few site I couldn't even. It seemed to get worse until:

  I fould a place that gave me these instructions:

  1. Reregister the BITS files and Windows Update files. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
     • Regsvr32.exe atl.dll
     • Regsvr32.exe urlmon.dll
     • Regsvr32.exe mshtml.dll
     • Regsvr32.exe shdocvw.dll
     • Regsvr32.exe browseui.dll
     • Regsvr32.exe jscript.dll
     • Regsvr32.exe vbscript.dll
     • Regsvr32.exe scrrun.dll
     • Regsvr32.exe msxml.dll
     • Regsvr32.exe msxml3.dll
     • Regsvr32.exe msxml6.dll
     • Regsvr32.exe actxprxy.dll
     • Regsvr32.exe softpub.dll
     • Regsvr32.exe wintrust.dll
     • Regsvr32.exe dssenh.dll
     • Regsvr32.exe rsaenh.dll
     • Regsvr32.exe gpkcsp.dll
     • Regsvr32.exe sccbase.dll
     • Regsvr32.exe slbcsp.dll
     • Regsvr32.exe cryptdlg.dll
     • Regsvr32.exe oleaut32.dll
     • Regsvr32.exe ole32.dll
     • Regsvr32.exe shell32.dll
     • Regsvr32.exe initpki.dll
     • Regsvr32.exe c:\windows\system32\wuapi.dll
     • Regsvr32.exe c:\windows\system32\wuaueng.dll
     • Regsvr32.exe wuaueng1.dll
     • Regsvr32.exe c:\windows\system32\dllcache\wucltui.dll
     • Regsvr32.exe c:\windows\system32\wups.dll
     • Regsvr32.exe wups2.dll
     • Regsvr32.exe wuweb.dll
     • Regsvr32.exe qmgr.dll
     • Regsvr32.exe qmgrprxy.dll
     • Regsvr32.exe c:\windows\system32\wucltux.dll
     • Regsvr32.exe c:\windows\system32\muweb.dll
     • Regsvr32.exe c:\windows\system32\wuwebv.dll
  2. Reset Winsock. To do this, type the following command at a command prompt and press ENTER:
     netsh winsock reset
  3. If you are running Windows XP or Windows Server 2003, you must set the proxy settings. To do this, type the following command at a command prompt and press ENTER:
     Proxycfg.exe d
  4. Restart the BITS service and the Windows Update service. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
     • net start bits
     • net start wuauserv
  5. If you are running Windows Vista or Windows Server 2008, erase the BITS queue. To do this, type the following command at a command prompt and press ENTER:
     Bitsadmin.exe/Reset /allusers
  6. Install the latest Windows Update Agent. For more information, click on the number below to view the article in the Microsoft Knowledge Base:
     949104 (http://support.microsoft.com/kb/949104/) how to obtain the latest version of the Windows Update Agent to help manage updates on a computer
  7. Restart the computer.

  After doing these, well most of them work. When I clicked on OK, but some are not. All of this worked!   I was able to update.  I was about to throw my computer!

  I don't know the tip you give here would have worked more quickly.  I just couldn't not here. Something was originally internet Exployer of do not leave me here.

  I had to work on him. Now everything seems to work very well. I have sort of my breatgh again and wory that error could haoppen again.

  1 million for your help thanks. It's great to have a place like this with pro like you here.  Much appreciated by a non pro like me.  Great place to learn more about computers.

• I had to get an update for C++ (kb2565063), 05/01/2012, or is it some kind of malware?

  original title; I had to get an update for C++ (kb2565063), 05/01/2012, or is it some kind of malware?  My configurations have been lost since then.

  My configurations have been lost since then. Half the time, automatic updates does not work, in any case. I gave to this question for centuries. 'Dxdiag' tells me things I don't believe, and there is no information system. Device Manager seems to work only when it wants to. My screen resolution has changed and I can't fix it. The icons are larger and the entire screen looks like to *! In fact, I can't even says the word "*" in this forum. I guess that my mouse settings have been too foires.

  You can try manually updates by visiting the Microsoft Download Center and search for the update by number of KB that is listed on the update list.

  http://Windows.Microsoft.com/en-us/Windows/downloads

  Reset the Windows Update components.

  http://support.Microsoft.com/kb/971058

  check in safe mode?

• Why do I get a window telling me that my virtual memory is low when I play games and how to fix it

  I use windows xp. I can play for a while and then I get the window saying: virtual memory is low. Once had a blue screen so I restarted my computer.

  Hello BarbHartie,
  This thread has been created in forum Windows XP update. the Microsoft moderation team has moved this thread in Forum Windows XP games.

• I get a message 'local disabled script' when I try to get into windows XP.

  I had bad sectors on my hard drive, so I had to try to repair my installation of windows XP. Now, when I'm trying to get into windows, it says I need to activate WIndows and I can't because scripts are disabled. Then he told me just that, and I can't do anything. It only disconnects. I tried safe mode, but it says I can't do it in safe mode and I have to activate in order to move forward.

  What can I do, if anything?

  PS Windows is authentic MSDNAA...

  Stjepan salvation,

  You can read the following article and check if it helps.

  Error message when you try to activate Windows XP: "local script has been disabled on this computer.

  Important: The above article contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the following article:

  How to back up and restore the registry in Windows

  Hope this information is useful.

• I get the windows login screen and I do not know the password for administrators

  I accidentally deleted my account and when the computer starts and I get the windows login screen and I do not know the administrators password. Also how can I reinstall windows when I got a disc when I brought my laptop. Thank you, Lorraine

  Thanks for getting back to me. I sold my old laptop to my son-in-law, and he asked me to remove my name from the computer off so that my name wasn't on the screen all the time. so I deleted the profile of cook of lorraine and made one for him, but I didn't give it a password. then I realized what I had to do (I got Lorraine where time is on the bottom of the screen), but was unable to highlight to remove it without a mouse. so I plugged a mouse, but the computer does not read, then I restarted the computer. When I restarted, all I could get was the windows login screen.

  then I typed in the name son-nlaws and they said that he was kidnapped, tyoed in mine and got the same and then typed in Administrator, but did not know the password. I have since reinstalled windows. XP Professional would not install saying a file was missing, so I installed xp family and is working again. He just has to click on what edition it wants to run. Professional XP of course happen just with the display of connection... but it can use again.
  Thank you once again, Lorraine

• Can a minor get a windows live account?

  Hey. I'm Mewster. I had already done a Windows Live e-mail account and started using Bing when I discovered that the terms of Service are a contract. I'm a minor. If it is a contract, so why was I able to put in my real birth date and get away with it. Can my mother get into this on my behalf? And if I need to disable my account, can you suggest a minor email service can use and suggest Microsoft until the age limit to register if no one else has to go? Thank you and God bless.

  Hello

  There may be solutions but that they would be through the links I posted above as
  Answer a zero contact or influence on Windows Live Mail or Hotmail. If we had the
  same questions that we would have to use these links to contact support.

  Sorry we cannot help more:

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Installed wireless Belkin, unable to see network, get error windows cannot configure this wireless connection and starting the WZC abuse

  Hello

  I have a belkin wireless router that worked on my primary computer and a portable computer for years.

  Recently, I moved my main computer and now it dosnt seem to work. Belkin is installed but when I ask to see available networks, it says that windows cannot configure this wireless connection and starting the WZC abuse. Belkin still works fine on my laptop so I know no there is not a problem here. Can someone help me please? I tried to type in %SystemRoot%\system32\services.mcs\s as with a question of people, but all I get is windows can't find this.

  Any ideas please?

  Thank you

  * original title - Help... problem with belkin wireless *.

  Let's see if I can cut through it.

  You wrote:

  Click the Wireless Networks (see this picture) - I did

  Is the box 'Use Windows to configure my wireless network' checked or unchecked? There is no such box.

  I connect using - he says belkin. another box saying this connection uses the following items. then underneath there are 3 tabs - install, uninstall and properties. If I press on properties it says name provider and in this box, it says windows index.

  It seems that you don't have not clicked the "Wireless networks" tab, after you open the properties of your wireless adapter.  From your description, you look at the 'Général' tab: click HERE to see the "Général" tab Click HERE to see the 'Wireless Networks' tab.

  There are 5 columns: name, description, status, startup type and log as.  The values for the last 3 columns should be started, automatic and Local System - on my screen there are 4 tabs at the top - general, connect you, recovery and dependency.

  You skipped a step... 5 columns are in the 'Services' window initial... you arrive at "4 tabs at the top", AFTER you double-click the Wireless Auto Configuration.

  Status of the service which includes 4 boxes. stop suspend and resume. the button highlighted in the start menu

  Just to the right of the expression "Service status", you should see a Word.  On your system, this word probably is "stopped."  The 4 buttons (boxes) are how to control the service.  Because you said that the highlighted button is 'start' which means that the service is currently stopped, and you will need to click on this button "start" to start.

  I strongly suspect that you had used the Belkin utility to control your adapter - and now, you also started WZC.  As I wrote above, you can have both running at the same time.

  When you click the icon of your "Belkin", do you have a screen that looks like this: http://www.wi-fiplanet.com/img/2006/belkinn1/08.jpg

  If so, you should return to the utility Services and 'Stop' the automatic configuration service.  If you want to use WZC instead of the Belkin utility, see http://en-us-support.belkin.com/app/answers/detail/a_id/40/related/1

  I'm not familiar with the Belkin Wireless networking utility, but many wifi manufacturer utilities can be used to turn your wifi on and off, then maybe your was off (the adapter on your computer - not the router).  If you identify the model of the card you have in your main computer, I'll see if I can find the manual on the Belkin website and maybe give you a little more information.

• When you try to start the programs of their shortcuts, I always get a window MS-DOS pop up

  When you try to start the programs of their shortcuts, I always get a window MS-DOS pop up.  The header says 16-bit subsystem MS_DOS.  For example, when you try to start Microsoft Word, the message says:

  C:\Documents and Settings\All Users\Menu demarrer\programmes\microsoft Office\Microsoft Office Word 2003.lnk program invalid file name, please check your pif file.

  I can start the program by clicking on any document in my documents file, however.  I know that something is messed up in the registry (we had a bad worm (MS Removal Tool).  However, I can't a registry cleaner to open.  I used a WinXP_EXE_Fix.reg to try to fix the missing exe file.  He has set a number of things, but still will not let me run a registry clean.

  Any help?

  Hello

  Try the following steps:

  1. follow the steps from the link below: cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP computer: http://support.microsoft.com/kb/923077

  2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• I forgot my password to get into Windows XP; My clue to help me only remember part of the password. What can I do?

  The modem on my computer went wrong & couldn't be fixed, so I bought a new computer.

  I took the hard drive from my old computer and installed in a tower, I had.

  Everything is up and running, but it's been so long, I don't remember my password to get into Windows XP.

  Is there anyway I can retrieve this password, or set up a new without having to reinstall windows?

  Thanks for any help.

  Frances

  Yes, there is, but we are not allowed to help you with that, because people will use this information for illegal purposes.

  Contact your local store for PC repair help.