Halo 2 does not not after installation of Vista Service Pack 2

Similar Questions

• How to get audio back after installation of Vista Service Pack 1 - help pages don't help do not

  I was prompted to install Vista Service Pack 1 and audio lost. I followed the microsoft help pages to uninstall the sound driver and reinstall by using the Device Manager. But after that uninstall the audio driver disappeared and did not automatically reinstall as described. How can I return the audio? Help!

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for the latest Audio from Vista drivers > download/install them.

  If the above does not work:

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your question in Vista Hardware and drivers Forum above.

  See you soon.

  Mick Murphy - Microsoft partner

• Some files have been moved and are inaccessible after installation of Vista Service Pack 2

  For several months, I had been unable to install the latest updates of iTunes, always get the message "Could not access network location %AppData%". Recently, I realized that I had apparently never installed Windows Vista Service Pack 1 or 2 and the practice which finally allowed me to install iTunes 9.2.

  The problem I have now is that one (or two) of these Service Packs created a new profile user labelled 'TEMP' folder and that's where all my iPod apps seem to have "evaporated" to. I say evaporated because iTunes cannot locate, and when I access the folder of the user 'TEMP' (even using my administrator account), I found only a few subfolders (AppData (, LocalLow, Microsoft, CryptnetUrlCache), and those are all empty.  Either way, my administrator user account no longer shows upward at all when I use my 'normal' user code

  Making windows for .ipa files search is the only way I can see same registrants, but then when I try to open the location of file (Mobile Applications C:Users\TEMP\Music\iTunes) I get an error "the location is not available", which suggests that the information may have been moved to another location.

  I am running Windows Vista Home Premium 32-bit, Service Pack 2.

  Support Microsoft offers FREE for Vista SP2 issues support at: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1.  I'm sure they can help you.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• during the installation of Vista Service Pack 2, the computor has been disconnected. Now, I don't have an operating system and startup repair does not work. What should I do now?

  Computor was disconnected during the installation of Vista Service Pack 2. I did now no operating system and startup repair does not work. What should I do now?

  You may have to reinstall Vista from the original media or from the recovery partition according to the type of computer you have.

  Hope that you made the backup recommended all of your data before attempting to install Vista SP2.

• Download Windows Installer for Vista Service Pack 2 is not found! Help!

  Hello

  I desperately need help.  My windows installer does not work and I have tried everything to get it going, the reinstatement of the installer and do a system restore.  The first time I did the restore system it started working, but after installing the program, I needed I got a second program that must be downloaded.  The second download received error 1719 and impossible to download once again.  I was informed by my techno I would probably need download Windows install for Vista Service Pak 2.  I have received the link below, but was not able to find it?  Is there anyone who knows where I can download it.

  This is the link that has given me is not the one for Vista Service pack 2: http://www.microsoft.com/downloads/details.aspx?familyid=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Hi kookykaren,

  1. you remember to make changes to the computer before this problem?

  The link provided also applies to Windows Vista SP2.

  You can try the following steps and check if you can download the installation program.

  Method 1:

  Reregister windows install.

  a. Click Start, click Accessories and then click command prompt.

  b. at the command prompt, type the following and press ENTER after each line:

  MSIExec /Unregister

  MSIExec/regserver

  Method 2:

  Make sure that the Windows Installer service is started.

  a. Click Start, type services.msc in the search box and press ENTER to open Services.

  b. right click on the Windows Installer service, and then click Properties.

  c. If the startup type box is set to Disabled, change it to manual.

  d. click OK to close the Properties window.

  e. right click on the Windows Installer service and then click Start. The service should start without errors.

  f. now try to install the windows Installer 4.5 from the link you mentioned

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Sidebar problems since the installation of Vista Service Pack 2

  I installed Vista Service Pack 2 today. After the installation of the windows sidebar has stopped working. For example the actions of Gadget, Gadget of the currency, in fact all of the gadgets that require a live stream display the message "Service unavailable". Some gadgets loading is no longer at the side bar, double click on, for example Weatherbug & multimeter (D).  I tried a system restore, but the problem remains, so I did an extra restore to indeed to reinstall Vista Service Pack. I also reset the router and Modem

  I tried to remove the gadgets from the sidebar and load it again but the problem still remains.  So I decided to download gadgets again on the Microsoft site but when I click on the link in the window "Get more Gadgets online" link does not work. This problem is only since installing Vista Service Pack 2 any what help you can give me to eliminate these problems would be most appreciated

  Tony

  Tony,
  Have you checked your firewall to see if the file sidebar.exe is allowed?  When you have downloaded the update it probably resets the security settings for this program if your firewall blocks most likely it.  First try.

  Have you double checked the control panel for the side bar to ensure that it was activated?  Again, the setting could have been modified by the service pack.
  Try this, it includes a section "fix it for me":
  http://support.Microsoft.com/kb/963010

  Let us know if it helps or if you need further assistance.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• my laptop is messed up after installing Windows Vista Service Pack 2

  My internet does not work and a message came up saying "internet explore has stopped working, there is a problem, windows will let you know if there is a solution" a box then came advising me to install Windows Vista Service Pack 2 and I did and now my laptop is messed up. After that I connected, a black screen appears then I found a solution in another forum and able to-> explorer.exe task manager and a something regedit and once my computer has restarted after it is a message saying "Windows has encountered a critical problem and will restart automatically in a minute." and internet does more either.
  Help!

  Hi, somehow I managed to fix my laptop using other answers I found on the forums and they were based on what you sent me here. I now have another problem with my laptop on internet access and an error message appears on my firewall is OK, but my University has a firewall up, so I think I need to go see them on this subject. Thanks for your help, thank you very much

• Acer aspire has stopped working after I installed vista service pack, a

  After installing Vista service pack 1, I was unable to restart my computer. Nothing has worked. I went through the Startup Repair, but it ran all night and nothing. I have no disk, so I tried to do a system restore, but still nothing. I know very little computers if you can give me some details step by step on the following questions would be most appreciated.
  

  (1) how do I back up my data

  (2) how to restore my system

  Thank you

  Craig
  

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons). +

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11, Acer is normally Alt + F10 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you are replaying the ad.

  .

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Hang-up system to 76% during the installation of Vista Service Pack 1, 3/3.

  Hello!  I installed Vista SP1 last night and everything seemed to go well, except the system stagnates at 76% this morning at 04:00 (it is now 21:00).  I have the following message is displayed on my screen "installation of the Service Pack: step 3 3-76% complete.".  Do not turn off computer. "What should I do?  Help, please! and thank you!

  Finally, you will need to turn off if she does not finish install.

  http://support.Microsoft.com/kb/971058

  How to reset the Windows Update components?

  You then can he try again, or try a direct download.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en

  Vista 32-bit SP1

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=874a414b-32b2-41CC-bd8b-d71eda5ec07c&displaylang=en

  Vista SP1 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  But you send messages in the wrong Forum.

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• After downloading Windows Vista service pack 1, my computer screen had the blinking message "!" Oxc 0000034! 250/92313 (program_files_windows_calendar_4998559750

  I restarted bit keep getting option start normally or run repair program. ATER prog of running repair, he says he could not solve the problem and only asked if I wanted to report it. Computer wont even start in safe mode. Damage in the registry? Anyway my computer software was loaded at the factory and I don't have a recovery with her disk. Is there anyway that I can enter the partision to reload Vista? Otherwise, someone ' one can suggest how to fix my startup boot up?

  Hi coopervane,

  You can try a system restore by booting from the Windows Vista disc. Will need you the Windows Vista disc to do an offline system restore. You may need to contact the manufacturer of the computer or make arrangements for any Windows Vista disk that will help you start the computer and go to optins Startup Repair tool.

  To use offline system restore, you must have a Windows Vista CD or DVD. In addition, your computer must be configured to start from the CD-ROM or DVD drive. In some cases, you may need to change the settings of the BIOS on the computer to configure the computer to start from the CD-ROM or DVD drive. For more information on the configuration of the computer to start from the CD-ROM or DVD drive, see your computer documentation or contact the manufacturer of the computer. A recovery disk will not help, because it will erase all your data.

  First of all, start the computer from the reader. To do this, follow these steps:

  1. Insert the Windows Vista CD / DVD and restart the computer.

  2. When you receive the following message appears, press a key:

  Press any key to start from the CD or DVD.

  3. set the following preferences, and then click Next:

  o language to install

  o time and currency formats

  o keyboard or input method

  Then, use the offline System Restore to remove the service pack of Windows Vista. To do this, follow these steps:

  1. click on repair your computer, select the operating system you want to repair if necessary and then click Next.

  2. click on System Restore, and then click Next.

  3. click about to restore that corresponds to the date of installation of the service pack. The Restore Point will be labeled either install: Windows Update or install: Windows Vista Service Pack .

  4 confirm the disk hard that you want to restore, and then click Next.

  5. click Finishand then click Yes when you are prompted.

  6. when the system restore process is complete, click restart to restart the computer.

  7. when the computer restarts, click close to confirm that the system restore completed successfully.

  I hope this information is useful.

  Please let us know if you need further assistance.

  Concerning

  Rehman - Microsoft Support

• Captivate 6 opens does not after installation

  I installed Adobe Captivate 6 for a user, and it does not open. The Green splash screen comes up and nothing else happens. Executable file of the application indicates to use 25% of the CPU, but the program never ends opening. I tried uninstalling/reinstalling program and she is always the same, never completely opening past the Green splash screen. System resources should not be a problem because this PC has a processor Intel i5 (Quad 2.5 Ghz) and 4 GB of RAM. Any help would be greatly appreciated.

  Hello

  I think that you might have installed some fonts of others on your computer. Go inside the folder C:\WINDOWS\Fonts and copy and paste all the fonts into the folder fonts (create a folder of fonts on your desktop).

  Then try to remove all fonts inside: C:\WINDOWS\Fonts. You will not be able to remove all the fonts, but try to remove as much as possible.

  Then run Captivate6. If 6 Captivate launches successfully then you can place all the fonts from there fonts folder backup.

  It may be useful

  Thnaks

  VJ

• Installation: Windows Vista Service Pack 2... Now my computer will not boot

  After you install SP2, my computer starts is no longer.

  When I turn it on, it brings me to a black screen where I can choose to start windows normally or let windows search for a solution to the problem. I tried both - NOTHING WORKS.

  I tried to restore my computer to an earlier date, let windows search for a solution, everything you can possibly do on the options list. Whenever I have let windows start normally, it brings me to a black screen that says "!" 0 x 0000034! "177/76190 (_0000000000000000.cdf - ms).

  I am extremely frustrated. It seems that Microsoft has ruined my computer. Looks like I'm about to become a defender-apple... Unless this issue is resolved as soon as possible.

  Have you tried the system restore, without success.

  See if that will fix your problem:

  Download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Above information shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not solve your problem:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help for your problem here.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows xp home edition product key does not work in windows xp service pack 3 clean install from a disk streaming drag.

  I have a home edition of windows xp but slip listened to SP3, the installation when it asks for the product key, I enter my windows xp home edition original product key, but he says that this key is invalid, please check that you have not done it and try again

  If your key is issued for SP3, then it is possible that slipstraming does not include the update to recognize th ew SP3 batch of authorized keys.

  It is also possible that you used the wrong type of disc for the base of your wake - if the key is an OEM, you must use an OEM for installation and same disc, a disc of detail for a touch of detail.

• New installation of Vista service pack 1... will not restart

  Helping a friend clean an old computer.  said it ws no problem.  Laptop filled with viruses.  I cleaned then say that Service Pak 1 necessary to download.  I did it and now the laptop does not restart

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Problems printing MS programs after the installation of Vista Service Pack 2

  After installation of SP2, I can print is more than MS Word. I can print from the web, but when I send something to print from MS Word, it seems to go to the printer, but nothing happens. The printer icon shows in the task bar at the bottom of the screen but no document is displayed as pending and nothing prints. I tried the suggestions I've seen on this forum including to perform a clean boot and run the System File Checker. To solve the problem. I do a lot of printing of the word, so it is a major issue for me. I can't keep running at the public library to print my documents! Aaaaargh.

  You tried the simple expedient of detection/repair or Office Diagnostics, depending on your version of Word.
  Check with the manufacturer of your printer that does not have a printer available update driver?