Similar Questions

• Want HP DV6 7300ea

  Hello guys,.

  After much research, I decided to go for the HP envy DV6 model 7300ea only to find out that it is no longer available, after the call to HP, they said that a more recent similar model would be available in the next 1/2 week. I get it from another somwhere but nowhere can beat the price that HP had, virtually all places are out of stock with the exception of 2nd hand far away countries that I don't trust.

  ANYWAY - bottom line, nobody knows anything about the replacement model suh as plug, official release date etc.

  When the new material is launched by manufacturers, HP uses them and comes up with new products that enhance the functionality of existing models or a previous version. I would say that this one would be on foot of equal or better than this one.

• How can I get the tab bar to move the bookmarks column to the bass and opening on the far left.

  I have my favorites set as a sidebar fixed. In versions 2.0 and 3.0, when I open the tabs they were starting to the right of the bookmarks bar. Now with v15.0 I see it forcing the bookmark sidebar down and place a tab right above him. I tried the subject: configuration on the tabs and bookmarks settings with no luck. All I want is to have the behavior as if it were in 2.0. In other words, the bookmark sidemark is fixed and the tabs bar starting to the right. I can see where the developers thought it would be wise to extend the bar tab all the way from the far left of the browser on the right-hand page. But I like well confined in a quadrant to set.
  Thank you.

  No, it isn't. This "control" is part of a regular toolbar now. Any element of the toolbar can be out on the tab bar, as with other toolbars.

• East fell off my bike yesterday evening and damaged left hand, angle of body load. How much is it?

  I was bike correctly and safely, but leaned into a corner too at a crossroads and there is frost on the road and slipped pretty hard and fast.

  First things I checked where my phone and the laptop (it is a start 2011 15 "macbook pro)... Laptop was working fine last night, but this morning I looked again once the charge light came back corner is scratched and bent pretty bad must of missed it in black - after some pushing attempts I managed to load again, but realize it may be temporary - and his time to redo a big backup. Two photos below, the other seems to have turned to the left for some reason any.

  What is in this corner of the macbook, I don't think it's the brain as such... but it looks like a bad tooth. and enough to slice metal like this to slip so far. Makes me feel disgusted thinking about scratching my macbook along the floor... more on my hands... which is a disturbing look at my love of technology...

  Any help appreciated. Obviously off now guaranteed.

  

  What do you want to get help?

  Ask yourself how do a "its time to redo a big backup"? If Yes, read this: use Time Machine to back up or restore your Mac - Apple Support

  If you ask how to fix your computer damaged, take it to an authorized for assessment service and repair center.

  If you ask if there is damage to the internal components of the computer, take it to an authorized for assessment service center.

  If you ask about your left hand, bring it to a medical center for evaluation and repair.

• Contacts transfer to Smartphones blackBerry "BOLD" for hands-free kit does not work

  Hello

  I use almost all types of BlackBerry for recent years. So far I never had no problem with bluetooth, so I'm surprised that I have a problem of bluetooth with my "BOLD". In my car, I use a JVC NX 5000 audio/navigation/ipod/bluetooth while something. All the audio features work very well. The problem is transfer my addresses for the hands-free kit. This function works very well with all the previous BlackBerry pocket but not with the "BOLD". The error message on the "BOLD" refers to JVC, strange enough documentation that all previous handheld computers has functioned.

  Anyone any ideas?

  Thanks in advance,

  Thierry

  I guess I solved the problem. I remembered that some carkits have a limit of 500 numbers (BMW?). It turns out that the JVC (with hard drive) has the same question. So after removing some contacts outdated everything worked fine.

• Minesweeper point on body / hand puppet together to deal a simple skin?

  I have a simple puppet I rebuilt several times good puppet. I keep running into is a fixed point work very well to cement feet down, but when I add a flirty handmade either he treats the puppet together as a single skin... slide it works, but it's like I'm grabbing a unique pixel and the false with her puppet. So far, I have removed the layers and merged to simplify the puppet. I went through all the layers and deleted the "white" areas with the selection tool. Can't seem to understand this one.

  

  You can go there, it should work:

  http://Adobe.LY/1PAMLwZ

  To be honest I'm not sure of what exactly was going on the devil, but I've isolated the problem down to the layers of the hand-arm system (I replaced the red rectangles and it worked). So I tried flatten each arms together, has used the magic wand tool to select each arm, press cmd + shift + I to select the entire document outside the arms and press to delete - and it worked. So I think that there is a microscopic spot somewhere who was throwing things out. So I think it must be a question of the island, which should be better in the next version (I think that anything under 6px which is not connected will be ignored). I hope it does!

• I got Photoshop CS6 second hand by someone (unopened) and its not activating. What should I do?

  I had Photoshop CS6 second hand from someone and it was closed, but when I go to enter the serial number it says that it is inactive. What should I do?

  The condition of the packaging is not serious as far as installation goes.  Files can be downloaded installed using a disc instead.  If the license has been used previously and has not been formally transferred to your property, then this should be done.  Transfer a license of Adobe product

  If the package is not open then you are probably not using the correct number for the serial number because the number will be not visible from the outside of the package.

  If you are using the correct serial number then you will probably need to contact Support Adobe directly for assistance with it.  They are not generally available on weekends.

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• Photoshop won't let me not deselect the hand tool

  I was sent a jpg of a web to change banner ad. It was sent to my PC where I have Photoshop CS2 and I tried to make changes, but found that I don't have the best copies of our logo on the PC, so I saved what I had done so far and I transferred to my Mac to work on. I'm on OS X 10. ; 7.3.

  When I open on my Mac in CC in Photoshop, the hand tool showed on-screen even if highlighted the move tool in the Toolbox.

  He wouldn't let me change the tools in the Toolbox. the hand rest icon no matter what I do. But he does not behave as you would expect the hand tool to behave, either; It is not move the workspace. It doesn't have any effect at all.

  However, I can still copy and paste by using the menus. But I can not move what I stuck with the arrow keys of the keyboard.

  I was able to save and close the document by using the menus.

  Someone has seen something like this before? Can I do about it?

  I thought it might work in Photoshop CS6 better, so I'll try that next.

  She works in CS6, so maybe it was my OS.

• Need a helping hand to recreate some styles

  Hey, sorry guys, this is my biggest request so far that I can't work properly.
  

  
  

  Hey my new header (Work in progress) has a close .css obsolete file and I was wondering if I could get a hand with recreate it. In addition, the .css file is incompatible with my another .css file and I have no idea how I'm supposed to edit this extremely long file.

  

  In addition to this, I was wondering if I could get a hand to a drop down menu header like this (which I based my design of header autour)

  http://www.aucklanddj.co.nz/

  HTML codes:

  <! doctype html >

  <!-[if lt IE 7] > < class html = "ie6" lang = "fr" > <! [endif]-->

  <!-[if IE 7] > < class html = "ie7" lang = "fr" > <! [endif]-->

  <!-[if IE 8] > < class html = "ie8" lang = "fr" > <! [endif]-->

  <!-[if IE 9] > < class html = "ie9" lang = "fr" > <! [endif]-->

  <!-[if gt IE 9] > <!--> < html lang = "en" > <!-<! [endif]-->

  < head >

  < title > Expertpcguides.com < / title >

  < link href = "css/header - styling.css" rel = "stylesheet" type = "text/css" >

  <!-[if lt IE 9] >

  "< link rel ="stylesheet"href="/silverstripe-browsersupport/css/style.css ">

  <! [endif]-->

  < / head >

  < body >

  < div class = "page-wrap" >

  < div id = "Web" >

  < header id = "header" = "banner" role of site >

  < div class = "container" >

  < div class = "inner" >

  < nav id = role = "navigation" ' header-nav">

  < ul class = "-no style list clearfix" >

  < class li = "left" >

  < ul class = "-no style list clearfix" >

  < class li = "" >

  < a class = "link" href = "www.expertpcguides.com" > dictionary < /a > < /li >

  < class li = "" >

  < a class = "link" href = "www.expertpcguides.com" > items < /a > < /li >

  < class li = "" >

  < a class = "link" href = "www.expertpcguides.com" > story of the PC < /a > < /li >

  < /ul >

  < /li >

  < class li = "Center" >

  " < a class = 'site-mark' href = ' http://www.expertpcguides.com/IMG/logo-smaller.PNG "> PC expert Guides < /a > < /li > .

  < class li = "right" >

  < ul class = "-no style list clearfix" >

  < class li = "" >

  < a class = "link" href = "www.expertpcguides.com" > Top downloads < /a > < /li >

  < class li = "" > < a class = "link" href = "www.expertpcguides.com" > Forums < /a > < /li >

  < class li = "" >

  < a class = "link" href = "www.expertpcguides.com" > Connect < /a > < /li >

  < /ul >

  < /li >

  < /ul >

  < / nav > <!-header / # - nav - >

  < ul id = "header-subnav" class = "-no style list clearfix" >

  < li >

  < a class = "btn, btn - sm" href = "www.expertpcguides.com" data-toggle = "modal" data-target = "#contact - modal" > contact us < /a > < /li >

  < li >

  < a class = "btn, btn - sm" href = "www.expertpcguides.com" > About Us < /a > < /li >

  < /ul > <!-header / # - subnav - >

  < / div >

  < / div > <!-/-> .container

  < / header >

  <!--> header - site / # -.

  <!-/ - fixed - head-# site - >

  < / html >

  If interested I will post a short version of the current .css file. But for the moment, I think that its too long to post. Thanks for the help in advance.

  Have you given some thought tot rebuild the old pages of site with less code?  In its current state, it is undisciplined with all those

  Tags inside
• labels, , etc...  HTML5 provides a very good opportunity to simplify your code essentially - without all the other stuff.  This would make your CSS a lot less painful to work, too.

  Nancy O.